- 07 Dec, 2019 2 commits
-
-
Chris Wilson authored
In the extreme case, we may wish to wait on an rcu-barrier to reap stale vm to purge the last of the object bindings. However, we are not allowed to use rcu_barrier() beneath the dma_resv (i.e. object) lock and do not take lightly the prospect of unlocking a mutex deep in the bowels of the routine. i915_gem_object_unbind() itself does not need the object lock, and it turns out the callers do not need to the unbind as part of a locked sequence around set-cache-level, so rearrange the code to avoid taking the object lock in the callers. <4> [186.816311] ====================================================== <4> [186.816313] WARNING: possible circular locking dependency detected <4> [186.816316] 5.4.0-rc8-CI-CI_DRM_7486+ #1 Tainted: G U <4> [186.816318] ------------------------------------------------------ <4> [186.816320] perf_pmu/1321 is trying to acquire lock: <4> [186.816322] ffff88849487c4d8 (&mm->mmap_sem#2){++++}, at: __might_fault+0x39/0x90 <4> [186.816331] but task is already holding lock: <4> [186.816333] ffffe8ffffa05008 (&cpuctx_mutex){+.+.}, at: perf_event_ctx_lock_nested+0xa9/0x1b0 <4> [186.816339] which lock already depends on the new lock. <4> [186.816341] the existing dependency chain (in reverse order) is: <4> [186.816343] -> #6 (&cpuctx_mutex){+.+.}: <4> [186.816349] __mutex_lock+0x9a/0x9d0 <4> [186.816352] perf_event_init_cpu+0xa4/0x140 <4> [186.816357] perf_event_init+0x19d/0x1cd <4> [186.816362] start_kernel+0x372/0x4f4 <4> [186.816365] secondary_startup_64+0xa4/0xb0 <4> [186.816381] -> #5 (pmus_lock){+.+.}: <4> [186.816385] __mutex_lock+0x9a/0x9d0 <4> [186.816387] perf_event_init_cpu+0x6b/0x140 <4> [186.816404] cpuhp_invoke_callback+0x9b/0x9d0 <4> [186.816406] _cpu_up+0xa2/0x140 <4> [186.816409] do_cpu_up+0x61/0xa0 <4> [186.816411] smp_init+0x57/0x96 <4> [186.816413] kernel_init_freeable+0xac/0x1c7 <4> [186.816416] kernel_init+0x5/0x100 <4> [186.816419] ret_from_fork+0x24/0x50 <4> [186.816421] -> #4 (cpu_hotplug_lock.rw_sem){++++}: <4> [186.816424] cpus_read_lock+0x34/0xd0 <4> [186.816427] rcu_barrier+0xaa/0x190 <4> [186.816429] kernel_init+0x21/0x100 <4> [186.816431] ret_from_fork+0x24/0x50 <4> [186.816433] -> #3 (rcu_state.barrier_mutex){+.+.}: <4> [186.816436] __mutex_lock+0x9a/0x9d0 <4> [186.816438] rcu_barrier+0x23/0x190 <4> [186.816502] i915_gem_object_unbind+0x3a6/0x400 [i915] <4> [186.816537] i915_gem_object_set_cache_level+0x32/0x90 [i915] <4> [186.816571] i915_gem_object_pin_to_display_plane+0x5d/0x160 [i915] <4> [186.816612] intel_pin_and_fence_fb_obj+0x9e/0x200 [i915] <4> [186.816679] intel_plane_pin_fb+0x3f/0xd0 [i915] <4> [186.816717] intel_prepare_plane_fb+0x130/0x520 [i915] <4> [186.816722] drm_atomic_helper_prepare_planes+0x85/0x110 <4> [186.816761] intel_atomic_commit+0xc6/0x350 [i915] <4> [186.816764] drm_atomic_helper_update_plane+0xed/0x110 <4> [186.816768] setplane_internal+0x97/0x190 <4> [186.816770] drm_mode_setplane+0xcd/0x190 <4> [186.816773] drm_ioctl_kernel+0xa7/0xf0 <4> [186.816775] drm_ioctl+0x2e1/0x390 <4> [186.816778] do_vfs_ioctl+0xa0/0x6f0 <4> [186.816780] ksys_ioctl+0x35/0x60 <4> [186.816782] __x64_sys_ioctl+0x11/0x20 <4> [186.816785] do_syscall_64+0x4f/0x210 <4> [186.816787] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4> [186.816789] -> #2 (reservation_ww_class_mutex){+.+.}: <4> [186.816793] __ww_mutex_lock.constprop.15+0xc3/0x1090 <4> [186.816795] ww_mutex_lock+0x39/0x70 <4> [186.816798] dma_resv_lockdep+0x10e/0x1f7 <4> [186.816800] do_one_initcall+0x58/0x2ff <4> [186.816802] kernel_init_freeable+0x137/0x1c7 <4> [186.816804] kernel_init+0x5/0x100 <4> [186.816806] ret_from_fork+0x24/0x50 <4> [186.816808] -> #1 (reservation_ww_class_acquire){+.+.}: <4> [186.816811] dma_resv_lockdep+0xec/0x1f7 <4> [186.816813] do_one_initcall+0x58/0x2ff <4> [186.816815] kernel_init_freeable+0x137/0x1c7 <4> [186.816817] kernel_init+0x5/0x100 <4> [186.816819] ret_from_fork+0x24/0x50 <4> [186.816820] -> #0 (&mm->mmap_sem#2){++++}: <4> [186.816824] __lock_acquire+0x1328/0x15d0 <4> [186.816826] lock_acquire+0xa7/0x1c0 <4> [186.816828] __might_fault+0x63/0x90 <4> [186.816831] _copy_to_user+0x1e/0x80 <4> [186.816834] perf_read+0x200/0x2b0 <4> [186.816836] vfs_read+0x96/0x160 <4> [186.816838] ksys_read+0x9f/0xe0 <4> [186.816839] do_syscall_64+0x4f/0x210 <4> [186.816841] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4> [186.816843] other info that might help us debug this: <4> [186.816846] Chain exists of: &mm->mmap_sem#2 --> pmus_lock --> &cpuctx_mutex <4> [186.816849] Possible unsafe locking scenario: <4> [186.816851] CPU0 CPU1 <4> [186.816853] ---- ---- <4> [186.816854] lock(&cpuctx_mutex); <4> [186.816856] lock(pmus_lock); <4> [186.816858] lock(&cpuctx_mutex); <4> [186.816860] lock(&mm->mmap_sem#2); <4> [186.816861] *** DEADLOCK *** Closes: https://gitlab.freedesktop.org/drm/intel/issues/728Signed-off-by:Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206105527.1130413-5-chris@chris-wilson.co.uk
-
Matthew Brost authored
The preferred way to access the uncore is through the GT structure. Update the GuC function, flush_ggtt_writes, to use this path. Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Signed-off-by:
John Harrison <john.c.harrison@intel.com> Reviewed-by:
-
- 06 Dec, 2019 14 commits
-
-
Chris Wilson authored
All pinning must be done prior to i915_request_create, to avoid timeline->mutex inversions. Here we slightly abuse the context_barrier_task stages to utilise the 'skip' decision as an opportunity to acquire the pin on the new ppgtt. Consider it s/skip/prepare/. At the moment, we only have on user of context_barrier_task, so it might be worth breaking it down for the specific task of set-vm and refactor it later if we find a second purpose. <4> [402.377487] WARNING: possible circular locking dependency detected <4> [402.377493] 5.4.0-rc8-CI-CI_DRM_7491+ #1 Tainted: G U <4> [402.377497] ------------------------------------------------------ <4> [402.377502] gem_exec_parall/2506 is trying to acquire lock: <4> [402.377507] ffff888403cdac70 (&kernel#2){+.+.}, at: i915_request_create+0x16/0x1c0 [i915] <4> [402.377593] but task is already holding lock: <4> [402.377597] ffff88835efad550 (&ppgtt->pin_mutex){+.+.}, at: gen6_ppgtt_pin+0x4d/0x110 [i915] <4> [402.377660] which lock already depends on the new lock. <4> [402.377664] the existing dependency chain (in reverse order) is: <4> [402.377668] -> #1 (&ppgtt->pin_mutex){+.+.}: <4> [402.377674] __mutex_lock+0x9a/0x9d0 <4> [402.377713] gen6_ppgtt_pin+0x4d/0x110 [i915] <4> [402.377756] emit_ppgtt_update+0x1dc/0x370 [i915] <4> [402.377801] context_barrier_task+0x176/0x310 [i915] <4> [402.377844] ctx_setparam+0x400/0xb10 [i915] <4> [402.377886] i915_gem_context_setparam_ioctl+0xc8/0x160 [i915] <4> [402.377891] drm_ioctl_kernel+0xa7/0xf0 <4> [402.377895] drm_ioctl+0x2e1/0x390 <4> [402.377899] do_vfs_ioctl+0xa0/0x6f0 <4> [402.377903] ksys_ioctl+0x35/0x60 <4> [402.377906] __x64_sys_ioctl+0x11/0x20 <4> [402.377910] do_syscall_64+0x4f/0x210 <4> [402.377914] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4> [402.377917] -> #0 (&kernel#2){+.+.}: <4> [402.377923] __lock_acquire+0x1328/0x15d0 <4> [402.377926] lock_acquire+0xa7/0x1c0 <4> [402.377930] __mutex_lock+0x9a/0x9d0 <4> [402.377977] i915_request_create+0x16/0x1c0 [i915] <4> [402.378013] intel_engine_flush_barriers+0x4c/0x100 [i915] <4> [402.378062] i915_ggtt_pin+0x7d/0x130 [i915] <4> [402.378108] gen6_ppgtt_pin+0x9c/0x110 [i915] <4> [402.378148] ring_context_pin+0x2e/0xc0 [i915] <4> [402.378183] __intel_context_do_pin+0x6b/0x190 [i915] <4> [402.378226] i915_gem_do_execbuffer+0x180c/0x26b0 [i915] <4> [402.378268] i915_gem_execbuffer2_ioctl+0x11b/0x460 [i915] <4> [402.378272] drm_ioctl_kernel+0xa7/0xf0 <4> [402.378275] drm_ioctl+0x2e1/0x390 <4> [402.378279] do_vfs_ioctl+0xa0/0x6f0 <4> [402.378282] ksys_ioctl+0x35/0x60 <4> [402.378286] __x64_sys_ioctl+0x11/0x20 <4> [402.378289] do_syscall_64+0x4f/0x210 <4> [402.378292] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4> [402.378295] other info that might help us debug this: <4> [402.378299] Possible unsafe locking scenario: <4> [402.378302] CPU0 CPU1 <4> [402.378305] ---- ---- <4> [402.378307] lock(&ppgtt->pin_mutex); <4> [402.378310] lock(&kernel#2); <4> [402.378314] lock(&ppgtt->pin_mutex); <4> [402.378317] lock(&kernel#2); <4> [402.378320] Signed-off-by: -
Andi Shyti authored
Get rid of the last remaining I915_WRITEs and replace them with intel_uncore_write(). Signed-off-by:
-
José Roberto de Souza authored
Commit 9c722e17 ("drm/i915: Disable pipes in reverse order") reverted the order that pipes gets disabled because of TGL master/slave relationship between transcoders in MST mode. But as stated in a comment in skl_commit_modeset_enables() the enabling order is not always crescent, possibly causing previously selected slave transcoder being enabled before master so another approach will be needed to select a transcoder to master in MST mode. It will be similar to the approach taken in port sync. But instead of implement something like intel_trans_port_sync_modeset_disables() to MST lets simply it and iterate over all pipes 2 times, the first one disabling any slave and then disabling everything else. The MST bits will be added in another patch. v2: Not using crtc->active as it is deprecated v3: Removing is_trans_port_sync_mode() check, just check for is_trans_port_sync_master() is enough v4: Adding and using is_trans_port_sync_slave(), otherwise non-port sync pipes will be disabled in the first loop, what is not wrong but is not what patch description promises Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v2) Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191205210350.96795-3-jose.souza@intel.com
-
José Roberto de Souza authored
For TGL the step to turn off the transcoder clock was moved to after the complete shutdown of DDI. Only the MST slave transcoders should disable the clock before that. v2: - Adding last_mst_stream to intel_mst_post_disable_dp, make code more easy to read and is similar to first_mst_stream in intel_mst_pre_enable_dp()(Ville's idea) - Calling intel_ddi_disable_pipe_clock() for GEN12+ right intel_disable_ddi_buf() as stated in BSpec(Ville) BSpec: 49190 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
José Roberto de Souza authored
It should not care about DDB allocations of pipes going through a fullmodeset, as at this point those pipes are disabled. The comment in the code also points to that but that was not what was being executed. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
José Roberto de Souza authored
Adding the recently added EHL/JSL PCI ids. BSpec: 29153 Cc: James Ausmus <james.ausmus@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Chris Wilson authored
If we see an already signaled dma-fence that we want to await on, we skip adding to the i915_sw_fence. However, we should pay attention to whether there was an error on that fence and if so propagate it for our future request. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206160428.1503343-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we see an already signaled fence that we want to await on, we skip adding to the i915_sw_fence. However, we should pay attention to whether there was an error on that fence and if so propagate it for our future request. Signed-off-by:
-
Chris Wilson authored
Only do the locked compare of the existing fence->error if we actually need to set an error. As we tend to call i915_sw_fence_set_error_once() unconditionally, it saves on typing to put the common has-error check into the inline. Signed-off-by:
-
Tvrtko Ursulin authored
We used to report the minimum possible frequency as both requested and active while GPU was in sleep state. This was a consequence of sampling the value from the "current frequency" field in our software tracking. This was strictly speaking wrong, but given that until recently the current frequency in sleeping state used to be equal to minimum, it did not stand out sufficiently to be noticed as such. After some recent changes have made the current frequency be reported as last active before GPU went to sleep, meaning both requested and active frequencies could end up being reported at their maximum values for the duration of the GPU idle state, it became much more obvious that this does not make sense. To fix this we will now sample the frequency counters only when the GPU is awake. As a consequence reported frequencies could be reported as below the GPU reported minimum but that should be much less confusing that the current situation. v2: * Split out early exit conditions for readability. (Chris) Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Chris Wilson authored
Before we signal the fence to indicate completion, ensure the pwrite through the indirect GGTT is coherent (as best as we know) in memory. Any listeners to the fence may start immediately and sample from the backing store prior to the writes being posted, thus seeing stale data. Signed-off-by:
-
Chris Wilson authored
Take a wakeref on the intel_gt specifically for the enabled breadcrumb interrupt so that we can safely process the mmio. If the intel_gt is already asleep by the time we try and setup the breadcrumb interrupt, by a process of elimination we know the request must have been completed and we can skip its enablement! <4> [1518.350005] Unclaimed write to register 0x220a8 <4> [1518.350323] WARNING: CPU: 2 PID: 3685 at drivers/gpu/drm/i915/intel_uncore.c:1163 __unclaimed_reg_debug+0x40/0x50 [i915] <4> [1518.350393] Modules linked in: vgem snd_hda_codec_hdmi x86_pkg_temp_thermal i915 coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core btusb cdc_ether btrtl usbnet btbcm btintel r8152 snd_pcm mii bluetooth ecdh_generic ecc i2c_hid pinctrl_sunrisepoint pinctrl_intel intel_lpss_pci prime_numbers [last unloaded: vgem] <4> [1518.350646] CPU: 2 PID: 3685 Comm: gem_exec_parse_ Tainted: G U 5.4.0-rc8-CI-CI_DRM_7490+ #1 <4> [1518.350708] Hardware name: Google Caroline/Caroline, BIOS MrChromebox 08/27/2018 <4> [1518.350946] RIP: 0010:__unclaimed_reg_debug+0x40/0x50 [i915] <4> [1518.350992] Code: 74 05 5b 5d 41 5c c3 45 84 e4 48 c7 c0 95 8d 47 a0 48 c7 c6 8b 8d 47 a0 48 0f 44 f0 89 ea 48 c7 c7 9e 8d 47 a0 e8 40 45 e3 e0 <0f> 0b 83 2d 27 4f 2a 00 01 5b 5d 41 5c c3 66 90 41 55 41 54 55 53 <4> [1518.351100] RSP: 0018:ffffc900007f39c8 EFLAGS: 00010086 <4> [1518.351140] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 <4> [1518.351202] RDX: 0000000080000006 RSI: 0000000000000000 RDI: 00000000ffffffff <4> [1518.351249] RBP: 00000000000220a8 R08: 0000000000000000 R09: 0000000000000000 <4> [1518.351296] R10: ffffc900007f3990 R11: ffffc900007f3868 R12: 0000000000000000 <4> [1518.351342] R13: 00000000fefeffff R14: 0000000000000092 R15: ffff888155fea000 <4> [1518.351391] FS: 00007fc255abfe40(0000) GS:ffff88817ab00000(0000) knlGS:0000000000000000 <4> [1518.351445] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [1518.351485] CR2: 00007fc2554882d0 CR3: 0000000168ca2005 CR4: 00000000003606e0 <4> [1518.351529] Call Trace: <4> [1518.351746] fwtable_write32+0x114/0x1d0 [i915] <4> [1518.351795] ? sync_file_alloc+0x80/0x80 <4> [1518.352039] gen8_logical_ring_enable_irq+0x30/0x50 [i915] <4> [1518.352295] irq_enable.part.10+0x23/0x40 [i915] <4> [1518.352523] i915_request_enable_breadcrumb+0xb5/0x330 [i915] <4> [1518.352575] ? sync_file_alloc+0x80/0x80 <4> [1518.352612] __dma_fence_enable_signaling+0x60/0x160 <4> [1518.352653] ? sync_file_alloc+0x80/0x80 <4> [1518.352685] dma_fence_add_callback+0x44/0xd0 <4> [1518.352726] sync_file_poll+0x95/0xc0 <4> [1518.352767] do_sys_poll+0x24d/0x570 Signed-off-by:
-
Chris Wilson authored
Remove the vma we wish to destroy from the gt->closed_list to avoid having two i915_vma_parked() try and free it. Fixes: aa5e4453 ("drm/i915/gem: Try to flush pending unbind events") References: 2850748e ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by:
-
Chris Wilson authored
It appears now that we have the ring TLB invalidation in place, we need only update the page directory cachelines that we have altered. A great reduction from rewriting the whole 2MiB ppgtt on every update. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191205234059.1010030-1-chris@chris-wilson.co.uk
-
- 05 Dec, 2019 8 commits
-
-
Chris Wilson authored
As __active_retire() does it's final atomic_dec() under the ref->tree_lock spinlock, in order to prevent ourselves from reusing the ref->cache and ref->tree as they are being destroyed, we need to serialise with the retirement during i915_active_acquire(). [ +0.000005] kernel BUG at drivers/gpu/drm/i915/i915_active.c:157! [ +0.000011] invalid opcode: 0000 [#1] SMP [ +0.000004] CPU: 7 PID: 188 Comm: kworker/u16:4 Not tainted 5.4.0-rc8-03070-gac5e57322614 #89 [ +0.000002] Hardware name: Razer Razer Blade Stealth 13 Late 2019/LY320, BIOS 1.02 09/10/2019 [ +0.000082] Workqueue: events_unbound active_work [i915] [ +0.000059] RIP: 0010:__active_retire+0x115/0x120 [i915] [ +0.000003] Code: 75 28 48 8b 3d 8c 6e 1a 00 48 89 ee e8 e4 5f a5 c0 48 8b 44 24 10 65 48 33 04 25 28 00 00 00 75 0f 48 83 c4 18 5b 5d 41 5c c3 <0f> 0b 0f 0b 0f 0b e8 a0 90 87 c0 0f 1f 44 00 00 48 8b 3d 54 6e 1a [ +0.000002] RSP: 0018:ffffb833003f7e48 EFLAGS: 00010286 [ +0.000003] RAX: ffff8d6e8d726d00 RBX: ffff8d6f9db4e840 RCX: 0000000000000000 [ +0.000001] RDX: ffffffff82605930 RSI: ffff8d6f9adc4908 RDI: ffff8d6e96cefe28 [ +0.000002] RBP: ffff8d6e96cefe00 R08: 0000000000000000 R09: ffff8d6f9ffe9a50 [ +0.000002] R10: 0000000000000048 R11: 0000000000000018 R12: ffff8d6f9adc4930 [ +0.000001] R13: ffff8d6f9e04fb00 R14: 0000000000000000 R15: ffff8d6f9adc4988 [ +0.000002] FS: 0000000000000000(0000) GS:ffff8d6f9ffc0000(0000) knlGS:0000000000000000 [ +0.000002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000002] CR2: 000055eb5a34cf10 CR3: 000000018d609002 CR4: 0000000000760ee0 [ +0.000002] PKRU: 55555554 [ +0.000001] Call Trace: [ +0.000010] process_one_work+0x1aa/0x350 [ +0.000004] worker_thread+0x4d/0x3a0 [ +0.000004] kthread+0xfb/0x130 [ +0.000004] ? process_one_work+0x350/0x350 [ +0.000003] ? kthread_park+0x90/0x90 [ +0.000005] ret_from_fork+0x1f/0x40 Reported-by:
Kenneth Graunke <kenneth@whitecape.org> Fixes: c9ad602f ("drm/i915: Split i915_active.mutex into an irq-safe spinlock for the rbtree") Signed-off-by:
-
Andi Shyti authored
Get rid of the last remaining I915_READ in gt/ and make gt-land the first I915_READ-free happy island. Suggested-by:
-
Chris Wilson authored
As virtual_context_destroy() may be called from a request signal, it may be called from inside an irq-off section, and so we need to do a full save/restore of the irq state rather than blindly re-enable irqs upon unlocking. <4> [110.024262] WARNING: inconsistent lock state <4> [110.024277] 5.4.0-rc8-CI-CI_DRM_7489+ #1 Tainted: G U <4> [110.024292] -------------------------------- <4> [110.024305] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. <4> [110.024323] kworker/0:0/5 [HC0[0]:SC0[0]:HE1:SE1] takes: <4> [110.024338] ffff88826a0c7a18 (&(&rq->lock)->rlock){?.-.}, at: i915_request_retire+0x221/0x930 [i915] <4> [110.024592] {IN-HARDIRQ-W} state was registered at: <4> [110.024612] lock_acquire+0xa7/0x1c0 <4> [110.024627] _raw_spin_lock_irqsave+0x33/0x50 <4> [110.024788] intel_engine_breadcrumbs_irq+0x38c/0x600 [i915] <4> [110.024808] irq_work_run_list+0x49/0x70 <4> [110.024824] irq_work_run+0x26/0x50 <4> [110.024839] smp_irq_work_interrupt+0x44/0x1e0 <4> [110.024855] irq_work_interrupt+0xf/0x20 <4> [110.024871] __do_softirq+0xb7/0x47f <4> [110.024885] irq_exit+0xba/0xc0 <4> [110.024898] do_IRQ+0x83/0x160 <4> [110.024910] ret_from_intr+0x0/0x1d <4> [110.024922] irq event stamp: 172864 <4> [110.024938] hardirqs last enabled at (172863): [<ffffffff819ea214>] _raw_spin_unlock_irq+0x24/0x50 <4> [110.024963] hardirqs last disabled at (172864): [<ffffffff819e9fba>] _raw_spin_lock_irq+0xa/0x40 <4> [110.024988] softirqs last enabled at (172812): [<ffffffff81c00385>] __do_softirq+0x385/0x47f <4> [110.025012] softirqs last disabled at (172797): [<ffffffff810b829a>] irq_exit+0xba/0xc0 <4> [110.025031] other info that might help us debug this: <4> [110.025049] Possible unsafe locking scenario: <4> [110.025065] CPU0 <4> [110.025075] ---- <4> [110.025084] lock(&(&rq->lock)->rlock); <4> [110.025099] <Interrupt> <4> [110.025109] lock(&(&rq->lock)->rlock); <4> [110.025124] *** DEADLOCK *** <4> [110.025144] 4 locks held by kworker/0:0/5: <4> [110.025156] #0: ffff88827588f528 ((wq_completion)events){+.+.}, at: process_one_work+0x1de/0x620 <4> [110.025187] #1: ffffc9000006fe78 ((work_completion)(&engine->retire_work)){+.+.}, at: process_one_work+0x1de/0x620 <4> [110.025219] #2: ffff88825605e270 (&kernel#2){+.+.}, at: engine_retire+0x57/0xe0 [i915] <4> [110.025405] #3: ffff88826a0c7a18 (&(&rq->lock)->rlock){?.-.}, at: i915_request_retire+0x221/0x930 [i915] <4> [110.025634] stack backtrace: <4> [110.025653] CPU: 0 PID: 5 Comm: kworker/0:0 Tainted: G U 5.4.0-rc8-CI-CI_DRM_7489+ #1 <4> [110.025675] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0054.2017.1025.1822 10/25/2017 <4> [110.025856] Workqueue: events engine_retire [i915] <4> [110.025872] Call Trace: <4> [110.025891] dump_stack+0x71/0x9b <4> [110.025907] mark_lock+0x49a/0x500 <4> [110.025926] ? print_shortest_lock_dependencies+0x200/0x200 <4> [110.025946] mark_held_locks+0x49/0x70 <4> [110.025962] ? _raw_spin_unlock_irq+0x24/0x50 <4> [110.025978] lockdep_hardirqs_on+0xa2/0x1c0 <4> [110.025995] _raw_spin_unlock_irq+0x24/0x50 <4> [110.026171] virtual_context_destroy+0xc5/0x2e0 [i915] <4> [110.026376] __active_retire+0xb4/0x290 [i915] <4> [110.026396] dma_fence_signal_locked+0x9e/0x1b0 <4> [110.026613] i915_request_retire+0x451/0x930 [i915] <4> [110.026766] retire_requests+0x4d/0x60 [i915] <4> [110.026919] engine_retire+0x63/0xe0 [i915] Fixes: b1e3177b ("drm/i915: Coordinate i915_active with its own mutex") Fixes: 6d06779e ("drm/i915: Load balancing across a virtual engine") Signed-off-by: -
Chris Wilson authored
As we may start the loop again, we require our local list of i915_vma we've processed to be reinitialised. Fixes: aa5e4453 ("drm/i915/gem: Try to flush pending unbind events") Closes: https://gitlab.freedesktop.org/drm/intel/issues/731Signed-off-by:
-
Chris Wilson authored
Invalidate the ring TLB and increase the delay required for Baytrail. Signed-off-by:
-
Chris Wilson authored
It is not acceptable for context pinning to fail with -ENOSPC as we should always be able to make space in the GGTT. The only reason we may fail is that other "temporary" context pins are reserving their space and we need to wait for an available slot. Closes: https://gitlab.freedesktop.org/drm/intel/issues/676Signed-off-by:
-
Chris Wilson authored
Removing all vma from the VM is best effort -- we only remove all those ready to be removed, so forgive and VMA that becomes pinned. While forgiving those that become pinned, also take a second look for any that became unpinned as we waited. Signed-off-by:
-
Chris Wilson authored
The use GEM context itself was removed in commit cd30a503 ("drm/i915/gem: Excise the per-batch whitelist from the context"), but the locals were left in place as an oversight. Remove the parameters and clean up. References: cd30a503 ("drm/i915/gem: Excise the per-batch whitelist from the context") Signed-off-by:
-
- 04 Dec, 2019 12 commits
-
-
Chris Wilson authored
Call i915_user_extensions() to validate the arg->extensions pointer, and so return consistent error numbers for the future. Signed-off-by:
-
Chris Wilson authored
Remember to take the lock before walking the obj->vma.list so that the nodes do not change beneath us! E.g., i915_gem_object_bump_inactive_ggtt:387 GEM_BUG_ON(vma->vm != &i915->ggtt.vm) Closes: https://gitlab.freedesktop.org/drm/intel/issues/691Signed-off-by:
-
Chris Wilson authored
If we cannot handle a vma within the unbind loop, try to flush the pending events (i915_vma_parked, i915_vm_release) and try again. This avoids a round trip to userspace that is not guaranteed to make forward progress, as the events we wait upon require being idle. References: cb6c3d45 ("drm/i915/gem: Avoid parking the vma as we unbind") Signed-off-by:
-
Abdiel Janulgue authored
This is really just an alias of mmap_gtt. The 'mmap offset' nomenclature comes from the value returned by this ioctl which is the offset into the device fd which userpace uses with mmap(2). mmap_gtt was our initial mmap_offset implementation, this extends our CPU mmap support to allow additional fault handlers that depends on the object's backing pages. Note that we multiplex mmap_gtt and mmap_offset through the same ioctl, and use the zero extending behaviour of drm to differentiate between them, when we inspect the flags. To support multiple mmap types on an object we need to support multiple mmap_offsets for an object (each offset in the global device address space corresponding to a unique instance of the object for a file + mmap type). As we drop the simplified drm core idea of a single mmap_offset, we need to provide replacement hooks for the dumb mmap interface as well. Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/1675 Testcase: igt/gem_mmap_offset Signed-off-by:
Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by:
-
Mao Wenan authored
There is no need to have the 'T *v' variable static since new value always be assigned before use it. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
Ville Syrjälä authored
Assuming intel_crtc_arm_fifo_underrun() only gets called when there's no pending plane updates we can utilize it on gen2 by checking the active_planes bitmask so that we only re-enable underrun reporting if some planes are active. i915_fifo_underrun_reset_write() seems to have the necessary hw_done/flip_done waits in place. Signed-off-by:
-
Ville Syrjälä authored
Let's just inline intel_pre_disable_primary_noatomic() into intel_plane_disable_noatomic(). The CxSR disable we can do regardless of which plane we're disabling, and while at it we can make the gen2 underrun w/a accurate by consulting the active_planes bitmask. Signed-off-by:
-
Ville Syrjälä authored
We have the active_planes bitmask now so use it to properly determine when some planes are visible for the gen2 underrun workaround. This let's us almost eliminate intel_post_enable_primary(). The manual underrun checks we can simply move into intel_atomic_commit_tail() since they loop over all the pipes already. No point in repeating the checks multiple times when there are multiple pipes in the commit. Signed-off-by:
-
Ville Syrjälä authored
Change the calling convention to just pass the state+crtc and switch to intel_ types throughout. We'll also do a quick s/if (old_primary_state)/if (new_primary_state)/ so that we'll be able to eliminate old_primary_state later. This is fine since we always have either both old and new state or neither. Signed-off-by:
-
Ville Syrjälä authored
Replace the old world 'pipe_config' variable name with the new thing. Signed-off-by:
-
Ville Syrjälä authored
Get rid of another 'dev' usage by passing dev_priv instead. Signed-off-by:
-
Ville Syrjälä authored
Don't pass the redundant dev_priv to needs_nv12_wa() and needs_scalerclk_wa(). Signed-off-by:
-
- 03 Dec, 2019 4 commits
-
-
Chris Wilson authored
And Haswell still occasionally forgets it is meant to be using a new page directory, so repeat ourselves a little louder. <7> [509.919864] heartbeat rcs0 heartbeat {prio:-2147483645} not ticking <7> [509.919895] heartbeat Awake? 8 <7> [509.919903] heartbeat Barriers?: no <7> [509.919912] heartbeat Heartbeat: 3008 ms ago <7> [509.919930] heartbeat Reset count: 0 (global 0) <7> [509.919937] heartbeat Requests: <7> [509.921008] heartbeat active a7eb:56e1* @ 5847ms: <7> [509.921157] heartbeat ring->start: 0x00001000 <7> [509.921164] heartbeat ring->head: 0x00001610 <7> [509.921170] heartbeat ring->tail: 0x000023d8 <7> [509.921176] heartbeat ring->emit: 0x000023d8 <7> [509.921182] heartbeat ring->space: 0x00002570 <7> [509.921189] heartbeat ring->hwsp: 0x7fffe100 <7> [509.921197] heartbeat [head 1628, postfix 1738, tail 1750, batch 0xffffffff_ffffffff]: <7> [509.921289] heartbeat [0000] 7a000002 00100002 00000000 00000000 7a000002 01154c1e 7ffff080 00000000 <7> [509.921299] heartbeat [0020] 11000001 00002220 ffffffff 12400001 00002220 7ffff000 00000000 11000001 <7> [509.921308] heartbeat [0040] 00002228 6e900000 7a000002 00100002 00000000 00000000 7a000002 01154c1e <7> [509.921317] heartbeat [0060] 7ffff080 00000000 12400001 00002228 7ffff000 00000000 7a000002 00100002 <7> [509.921326] heartbeat [0080] 00000000 00000000 7a000002 01154c1e 7ffff080 00000000 7a000002 001010a1 <7> [509.921335] heartbeat [00a0] 7ffff080 00000000 04000000 11000005 00022050 00010001 00012050 00010001 <7> [509.921345] heartbeat [00c0] 0001a050 00010001 00000000 0c000000 459a110c 00000000 11000005 00022050 <7> [509.921354] heartbeat [00e0] 00010000 00012050 00010000 0001a050 00010000 12400001 0001a050 7ffff000 <7> [509.921363] heartbeat [0100] 00000000 04000001 18802100 00000000 7a000002 011050a1 7fffe100 000056e1 <7> [509.921370] heartbeat [0120] 01000000 00000000 <7> [509.921538] heartbeat MMIO base: 0x00002000 <7> [509.921682] heartbeat CCID: 0x3fa0110d <7> [509.922342] heartbeat RING_START: 0x00001000 <7> [509.922353] heartbeat RING_HEAD: 0x00001628 <7> [509.922366] heartbeat RING_TAIL: 0x000023d8 <7> [509.922381] heartbeat RING_CTL: 0x00003001 <7> [509.922396] heartbeat RING_MODE: 0x00004000 <7> [509.922408] heartbeat RING_IMR: ffffffde <7> [509.922421] heartbeat ACTHD: 0x00000000_30e01628 <7> [509.922434] heartbeat BBADDR: 0x00000000_00004004 <7> [509.922446] heartbeat DMA_FADDR: 0x00000000_00002800 <7> [509.922458] heartbeat IPEIR: 0x00000000 <7> [509.922470] heartbeat IPEHR: 0x780c0000 <7> [509.922642] heartbeat PP_DIR_BASE: 0x6e700000 <7> [509.922652] heartbeat PP_DIR_BASE_READ: 0x00000000 <7> [509.922662] heartbeat PP_DIR_DCLV: 0xffffffff <7> [509.922678] heartbeat E a7eb:56e1* @ 5849ms: <7> [509.922689] heartbeat E a7eb:56e2- @ 5849ms: <7> [509.922698] heartbeat E a7eb:56e3 @ 5848ms: <7> [509.922707] heartbeat E a7eb:56e4 @ 5848ms: <7> [509.922715] heartbeat E a7eb:56e5 @ 5847ms: <7> [509.922724] heartbeat E a7eb:56e6 @ 5846ms: <7> [509.922735] heartbeat E a7eb:56e7 @ 5846ms: <7> [509.922744] heartbeat ...skipping 4 executing requests... <7> [509.922754] heartbeat E a7eb:56ec @ 3010ms: <7> [509.922796] heartbeat HWSP: <7> [509.922807] heartbeat [0000] 00000001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <7> [509.922817] heartbeat [0020] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <7> [509.922826] heartbeat * <7> [509.922836] heartbeat [0100] 000056e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <7> [509.922845] heartbeat [0120] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <7> [509.922851] heartbeat * <7> [509.922870] heartbeat Idle? no <7> [509.922878] heartbeat Signals: <7> [509.923000] heartbeat [a7eb:56e2] @ 5850ms Here, we have a failed context restore after the PD switch, but note that the PP_DIR_BASE register does not match the LRI in the ring. Bump it to 8^W 4 loops, and with that Baytrail starts passing the sanity checks. Signed-off-by: -
Chris Wilson authored
In order to avoid keeping a reference on the i915_vma (which is long overdue!) we have to coordinate all the possible lifetimes and only use the vma while we know it is alive. In this episode, we are reminded that while idle, the closed vma are destroyed. So if the GT idles while we are working with the vma, the vma itself becomes invalid. First class i915_vma here we come, but in the meantime keep piling on the straw. Signed-off-by:
-
José Roberto de Souza authored
Moving just to simplify handling as there is no change in behavior. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
José Roberto de Souza authored
Disabling pipe/transcoder clock before power down sink could cause sink lost signal, causing it to trigger a hotplug to notify source that link signal was lost. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
