- 26 Jul, 2023 6 commits
-
-
Takashi Iwai authored
This patch adds the support for USB MIDI 2.0 gadget function driver. The driver emulates a USB MIDI 2.0 interface with one or more UMP Endpoints, where each of UMP Endpoint is a pair of MIDI Endpoints for handling MIDI 2.0 UMP packets. When the function driver is bound, the driver creates an ALSA card object with UMP rawmidi devices. This is a kind of loop-back where the incoming and upcoming UMP packets from/to the MIDI 2.0 UMP Endpoints are transferred as-is. In addition, legacy (MIDI 1.0) rawmidi devices are created, so that legacy applications can work in the gadget side, too. When a USB MIDI 2.0 gadget interface appears, the connected host can use it with the snd-usb-audio driver where MIDI 2.0 support is enabled. Both gadget and connected hosts will have the similar UMP Endpoint and Function Block (or Group Terminal Block) information. Slight differences are the direction and UI-hint bits; it's due to the nature of gadget driver, and the input/output direction is swapped in both sides (the input for gadget is the output for host, and vice versa). The driver supports the brand-new UMP v1.1 feature, including the UMP Stream message handling for providing UMP Endpoint and Function Block information as well as dealing with the MIDI protocol switch. The driver responds to UMP Stream messages by itself. OTOH, MIDI-CI message handling isn't implemented in the kernel driver; it should be processed in the user-space through the loopback UMP device. As of this patch, the whole configuration is fixed, providing only one bidirectional UMP Endpoint containing a single FB/GTB with a single UMP Group. The configuration will be dynamically changeable in the following patches. The traditional MIDI 1.0 is still provided in the altset 0 (which is mandatory per spec). But it's only about the configuration, and no actual I/O will be running for the altset 0 as of this patch. The proper support MIDI 1.0 altset will follow in later patches, too. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20230725062206.9674-2-tiwai@suse.deSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stanley Chang authored
Document the USB PHY bindings for Realtek SoCs. Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB controller and using USB 3.0 PHY transceiver. Signed-off-by:
Stanley Chang <stanley_chang@realtek.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230725033318.8361-5-stanley_chang@realtek.comSigned-off-by:
-
Stanley Chang authored
Document the USB PHY bindings for Realtek SoCs. Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB controller and using USB 2.0 PHY transceiver. Signed-off-by:
-
Stanley Chang authored
Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB controller. Added the driver to drive the USB 3.0 PHY transceivers. Signed-off-by:
-
Stanley Chang authored
Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB controller. Added the driver to drive the USB 2.0 PHY transceivers. Signed-off-by:
-
Stanley Chang authored
In Realtek SoC, the parameter of usb phy is designed to can dynamic tuning base on port status. Therefore, add a notify callback of phy driver when usb port status change. The Realtek phy driver is designed to dynamically adjust disconnection level and calibrate phy parameters. When the device connected bit changes and when the disconnected bit changes, do port status change notification: Check if portstatus is USB_PORT_STAT_CONNECTION and portchange is USB_PORT_STAT_C_CONNECTION. 1. The device is connected, the driver lowers the disconnection level and calibrates the phy parameters. 2. The device disconnects, the driver increases the disconnect level and calibrates the phy parameters. When controller to notify connect that device is already ready. If we adjust the disconnection level in notify_connect, the disconnect may have been triggered at this stage. So we need to change that as early as possible. The status change of connection is before port reset. Therefore, we add an api to notify phy the port status changes. In this stage, the device is not port enable, and it will not trigger disconnection. Signed-off-by:
-
- 25 Jul, 2023 24 commits
-
-
Ladislav Michl authored
Rename dwc3_data to dwc3_am62 to make it consistent with other glue drivers, it's clearer that this is am62's specific. While there, do the same for data variable. Signed-off-by:
Ladislav Michl <ladis@linux-mips.org> Link: https://lore.kernel.org/r/ZLKoHhJvT+Y6aM+C@lenochSigned-off-by:
-
Xu Yang authored
For mxs PHY, if there is a vbus but the bus is not enumerated, we need to force the dp/dm as SE0 from the controller side. If not, there is possible USB wakeup due to unstable dp/dm, since there is possible no pull on dp/dm, such as there is a USB charger on the port. Signed-off-by:
Xu Yang <xu.yang_2@nxp.com> Acked-by:
Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230627110353.1879477-3-xu.yang_2@nxp.comSigned-off-by:
-
Xu Yang authored
The function mxs_phy_is_otg_host() will return true if OTG_ID_VALUE is 0 at USBPHY_CTRL register. However, OTG_ID_VALUE will not reflect the real state if the ID pin is float, such as Host-only or Type-C cases. The value of OTG_ID_VALUE is always 1 which means device mode. This patch will fix the issue by judging the current mode based on last_event. The controller will update last_event in time. Fixes: 7b09e676 ("usb: phy: mxs: refine mxs_phy_disconnect_line") Signed-off-by:
-
Xu Yang authored
Add USB PHY event for below situation: - usb role changed - vbus connect - vbus disconnect - gadget driver is enumerated USB PHY driver can get the last event after above situation occurs and deal with different situations. Signed-off-by:
-
Oliver Neukum authored
Documenting this ioctl along with the other ioctls Signed-off-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20230724092843.18410-1-oneukum@suse.comSigned-off-by:
-
Krzysztof Kozlowski authored
SDM660 SoC has two instances of DWC3 USB controller: one supporting USB 3.0 and one supporting only up to USB 2.0. The latter one does not use iface clock, so allow such variant to fix dtbs_check warnings: sda660-inforce-ifc6560.dtb: usb@c2f8800: clocks: [[37, 48], [37, 88], [37, 89], [37, 90]] is too short sda660-inforce-ifc6560.dtb: usb@c2f8800: clock-names:2: 'iface' was expected Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Krzysztof Kozlowski authored
The binding does not have to specify assigned-clocks, because they are already allowed by core DT schema. On the other hand, fixed assigned-clocks in the binding will not fit different boards or SoCs. Exactly this is the case for Qualcomm SuperSpeed DWC3 USB SoC controller binding, where few boards have different assigned-clocks: ipq8074-hk10-c1.dtb: usb@8cf8800: assigned-clocks: [[5, 131], [5, 132], [5, 133]] is too long sdm660-xiaomi-lavender.dtb: usb@a8f8800: assigned-clocks: [[37, 92], [37, 91], [38, 64]] is too long Signed-off-by:
-
Minda Chen authored
cdns3 just set PHY mode switch for USB3.0 PHY. If USB 2.0 PHY contains PHY mode switch setting, USB 2.0 PHY mode function can't be called. So add PHY mode switch function for USB 2.0 PHY. Signed-off-by:
Minda Chen <minda.chen@starfivetech.com> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20230721095923.20445-1-minda.chen@starfivetech.comSigned-off-by:
-
Xu Yang authored
In some cases, the user may need to tune the rise/fall time of the high-speed transmitter waveform for USB Certification. This will add a parameter for this purpose. The value will be fetched from dtb and finally written to the register. Signed-off-by:
-
Xu Yang authored
The fsl,picophy-rise-fall-time-adjust property can help to adjust the rise/fall times of the high-speed transmitter waveform. The value can be 0~3. It has no unit. According to the description of USBNC_n_PHY_CFG1 register, the rise/fall time will be increased or decreased by a certain percentage relative to design default time if a value is given to this property. Signed-off-by:
-
Xu Yang authored
In current driver, the value of tuning parameter will not take effect if samsung,picophy-* is assigned as 0. Because 0 is also a valid value acccording to the description of USB_PHY_CFG1 register, this will improve the logic to let it work. Fixes: 58a3cefb ("usb: chipidea: imx: add two samsung picophy parameters tuning implementation") cc: <stable@vger.kernel.org> Signed-off-by:
-
Utkarsh Patel authored
Cable type such as active and retimer received as a part of Thunderbolt3 or Thunderbolt4 cable discover mode VDO needs to be configured in the thunderbolt alternate mode. Configuring the register bits for this cable type is changed with Intel Meteor Lake platform. BIT2 for Retimer/Redriver cable and BIT22 for Active/Passive cable. Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Utkarsh Patel <utkarsh.h.patel@intel.com> Link: https://lore.kernel.org/r/20230718024703.1013367-3-utkarsh.h.patel@intel.comSigned-off-by:
-
Varadarajan Narayanan authored
Document the IPQ5332 dwc3 compatible. Reviewed-by:
Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/cb89ff518890117b82d41d29d058de6662753bc8.1689913334.git.quic_varada@quicinc.comSigned-off-by:
-
Rob Herring authored
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by:
Herve Codina <herve.codina@bootlin.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
-
Dmitry Baryshkov authored
Detect and report if the Audio Accessory device has been attached to the corresponding USB-C port. Acked-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Caleb Connolly <caleb.connolly@linaro.org> Link: https://lore.kernel.org/r/20230709200235.265674-1-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Andy Shevchenko authored
Use read_poll_timeout() instead of open coding it. In the same time, fix the typo in the error message. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230710094645.42111-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Ma Ke authored
We should verify the bound of the array to assure that host may not manipulate the index to point past endpoint array. Signed-off-by:
Ma Ke <make_ruc2021@163.com> Acked-by:
Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20230628081511.186850-1-make_ruc2021@163.comSigned-off-by:
-
Madhu M authored
Intel Lunar Lake IOM has a different IOM port status offset and size than Intel MTL. Intel Lunar Lake is the first platform to extend IOM port status from 32bit to 64bit by adding DDI port number into IOM port status. Added IOM_PORT_STATUS_REGS macro for using platform specific IOM port status offset and size. Reviewed-by:
Madhu M <madhu.m@intel.com> Link: https://lore.kernel.org/r/20230704080509.14251-1-madhu.m@intel.comSigned-off-by:
-
Anand Moon authored
Genesys Logic GL3523 is a 4-port USB 3.1 hub that has a reset pin to toggle and a 5.0V core supply exported though an integrated LDO is available for powering it. Add the support for this hub, for controlling the reset pin and the core power supply. Signed-off-by:
Anand Moon <linux.amoon@gmail.com> [m.felsch@pengutronix.de: include review feedback & port to 6.4] Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230623142228.4069084-2-m.felsch@pengutronix.deSigned-off-by:
-
Marco Felsch authored
Add the binding for the USB3.1 Genesys Logic GL3523 hub. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230623142228.4069084-1-m.felsch@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
struct i2c_driver::probe_new is about to go away. Switch the driver to use the probe callback with the same prototype. Signed-off-by:
-
Ivan Orlov authored
Now that the driver core allows for struct class to be in read-only memory, remove the usb_class structure and create the usbmisc_class const class structure declared at build time which places it into read-only memory, instead of having it to be dynamically allocated at load time. Additionally, now we register usb class at startup and unregister it when shutting down, so we don't have to count uses of the class. Therefore we don't need the 'usb_class' structure anymore. Due to this fact, remove all static functions related to class initialization and deinitialization. We can't use them in 'usb.c' since they are static and we don't really need them anymore. Since we have to register the class in usb_init function in 'usb.c' and use it in 'file.c' as well, declare the usbmisc_class structure as 'export' in the 'usb.h' file. Debatable moment: the class registration and unregistration functions could be extracted to the 'file.c'. I think we don't want to do this since it would be one-line functions. They would make the code paths more confusing and add calling overhead. Suggested-by:
Ivan Orlov <ivan.orlov0322@gmail.com> Link: https://lore.kernel.org/r/20230621202514.1223670-1-ivan.orlov0322@gmail.comSigned-off-by:
-
Xiaolei Wang authored
The device may be scheduled during the resume process, so this cannot appear in atomic operations. Since pm_runtime_set_active will resume suppliers, put set active outside the spin lock, which is only used to protect the struct cdns data structure, otherwise the kernel will report the following warning: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1163 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 651, name: sh preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 PID: 651 Comm: sh Tainted: G WC 6.1.20 #1 Hardware name: Freescale i.MX8QM MEK (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x64/0x80 dump_stack+0x1c/0x38 __might_resched+0x1fc/0x240 __might_sleep+0x68/0xc0 __pm_runtime_resume+0x9c/0xe0 rpm_get_suppliers+0x68/0x1b0 __pm_runtime_set_status+0x298/0x560 cdns_resume+0xb0/0x1c0 cdns3_controller_resume.isra.0+0x1e0/0x250 cdns3_plat_resume+0x28/0x40 Signed-off-by:Xiaolei Wang <xiaolei.wang@windriver.com> Acked-by:
-
- 23 Jul, 2023 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Swapping the ring buffer for snapshotting (for things like irqsoff) can crash if the ring buffer is being resized. Disable swapping when this happens. The missed swap will be reported to the tracer - Report error if the histogram fails to be created due to an error in adding a histogram variable, in event_hist_trigger_parse() - Remove unused declaration of tracing_map_set_field_descr() * tag 'trace-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/histograms: Return an error if we fail to add histogram to hist_vars list ring-buffer: Do not swap cpu_buffer during resize process tracing: Remove unused extern declaration tracing_map_set_field_descr()
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix stale help text in gconfig - Support *.S files in compile_commands.json - Flatten KBUILD_CFLAGS - Fix external module builds with Rust so that temporary files are created in the modules directories instead of the kernel tree * tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: rust: avoid creating temporary files kbuild: flatten KBUILD_CFLAGS gen_compile_commands: add assembly files to compilation database kconfig: gconfig: correct program name in help text kconfig: gconfig: drop the Show Debug Info help text
-
Miguel Ojeda authored
`rustc` outputs by default the temporary files (i.e. the ones saved by `-Csave-temps`, such as `*.rcgu*` files) in the current working directory when `-o` and `--out-dir` are not given (even if `--emit=x=path` is given, i.e. it does not use those for temporaries). Since out-of-tree modules are compiled from the `linux` tree, `rustc` then tries to create them there, which may not be accessible. Thus pass `--out-dir` explicitly, even if it is just for the temporary files. Similarly, do so for Rust host programs too. Reported-by:
Raphael Nestler <raphael.nestler@gmail.com> Closes: https://github.com/Rust-for-Linux/linux/issues/1015Reported-by:
Andrea Righi <andrea.righi@canonical.com> Tested-by: Raphael Nestler <raphael.nestler@gmail.com> # non-hostprogs Tested-by: Andrea Righi <andrea.righi@canonical.com> # non-hostprogs Fixes: 295d8398 ("kbuild: specify output names separately for each emission type from rustc") Cc: stable@vger.kernel.org Signed-off-by:
Miguel Ojeda <ojeda@kernel.org> Tested-by:
Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - Avoid pKVM finalization if KVM initialization fails - Add missing BTI instructions in the hypervisor, fixing an early boot failure on BTI systems - Handle MMU notifiers correctly for non hugepage-aligned memslots - Work around a bug in the architecture where hypervisor timer controls have UNKNOWN behavior under nested virt - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG in cpu hotplug resulting from per-CPU accessor sanity checking - Make WFI emulation on GICv4 systems robust w.r.t. preemption, consistently requesting a doorbell interrupt on vcpu_put() - Uphold RES0 sysreg behavior when emulating older PMU versions - Avoid macro expansion when initializing PMU register names, ensuring the tracepoints pretty-print the sysreg s390: - Two fixes for asynchronous destroy x86 fixes will come early next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: pv: fix index value of replaced ASCE KVM: s390: pv: simplify shutdown and fix race KVM: arm64: Fix the name of sys_reg_desc related to PMU KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption KVM: arm64: Add missing BTI instructions KVM: arm64: Correctly handle page aging notifiers for unaligned memslot KVM: arm64: Disable preemption in kvm_arch_hardware_enable() KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Bug and regression fixes for 6.5-rc3 for ext4's mballoc and jbd2's checkpoint code" * tag 'ext4_for_linus-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix rbtree traversal bug in ext4_mb_use_preallocated ext4: fix off by one issue in ext4_mb_choose_next_group_best_avail() ext4: correct inline offset when handling xattrs in inode body jbd2: remove __journal_try_to_free_buffer() jbd2: fix a race when checking checkpoint buffer busy jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint jbd2: remove journal_clean_one_cp_list() jbd2: remove t_checkpoint_io_list jbd2: recheck chechpointing non-dirty buffer
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fix from Steve French: "Add minor debugging improvement. The change improves ability to read a network trace to debug problems on encrypted connections which are very common (e.g. using wireshark or tcpdump). That works today with tools like 'smbinfo keys /mnt/file' but requires passing in a filename on the mount (see e.g. [1]), but it often makes more sense to just pass in the mount point path (ie a directory not a filename). So this fix was needed to debug some types of problems (an obvious example is on an encrypted connection failing operations on an empty share or with no files in the root of the directory) - so you can simply pass in the 'smbinfo keys <mntpoint>' and get the information that wireshark needs" Link: https://wiki.samba.org/index.php/Wireshark_Decryption [1] * tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number for cifs.ko cifs: allow dumping keys for directories too
-
Paolo Bonzini authored
Merge tag 'kvm-s390-master-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD Two fixes for asynchronous destroy
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.5, part #1 - Avoid pKVM finalization if KVM initialization fails - Add missing BTI instructions in the hypervisor, fixing an early boot failure on BTI systems - Handle MMU notifiers correctly for non hugepage-aligned memslots - Work around a bug in the architecture where hypervisor timer controls have UNKNOWN behavior under nested virt. - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG in cpu hotplug resulting from per-CPU accessor sanity checking. - Make WFI emulation on GICv4 systems robust w.r.t. preemption, consistently requesting a doorbell interrupt on vcpu_put() - Uphold RES0 sysreg behavior when emulating older PMU versions - Avoid macro expansion when initializing PMU register names, ensuring the tracepoints pretty-print the sysreg.
-
Mohamed Khalfella authored
Commit 6018b585 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables") added a check to fail histogram creation if save_hist_vars() failed to add histogram to hist_vars list. But the commit failed to set ret to failed return code before jumping to unregister histogram, fix it. Link: https://lore.kernel.org/linux-trace-kernel/20230714203341.51396-1-mkhalfella@purestorage.com Cc: stable@vger.kernel.org Fixes: 6018b585 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables") Signed-off-by:
Mohamed Khalfella <mkhalfella@purestorage.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
