- 08 Sep, 2015 14 commits
-
-
Yan, Zheng authored
Signed-off-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-
Ilya Dryomov authored
Need to free object_prefix when rbd_dev_v2_snap_context() fails, but only if this is the first time we are reading in the header. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
-
Ilya Dryomov authored
If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name is freed twice: once in rbd_dev_probe_parent() and then in its caller rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to handle parent images). rbd_dev_probe_parent() is responsible for probing the parent, so it shouldn't muck with clone's fields. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
-
Yan, Zheng authored
Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-
Jianpeng Ma authored
Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
-
Jianpeng Ma authored
parent inode is needed in creating new inode case. For ceph_open, the target inode already exists. Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
-
Jianpeng Ma authored
err != 0 is already handled. So skip this. Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
-
Brad Hubbard authored
Signed-off-by: Brad Hubbard <bhubbard@redhat.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
-
Yan, Zheng authored
During MDS failovers, MClientSnap message may cause kclient to move some inodes from root directory's snaprealm to mdsdir's snaprealm and queue snapshots for these inodes. For a FS has never created any snapshot, both root directory's snaprealm and mdsdir's snaprealm share the same snapshot contexts (both are ceph_empty_snapc). This confuses ceph_put_wrbuffer_cap_refs(), make it unable to distinguish snapshot buffers from head buffers. The fix is do not use ceph_empty_snapc as snaprealm's cached context. Signed-off-by: Yan, Zheng <zyan@redhat.com>
-
Ilya Dryomov authored
Even though it's static, con_work(), being a work func, shows up in various stacktraces a lot. Prefix it with ceph_. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-
Benoît Canet authored
ceph_msgr_slab_init may fail due to a temporary ENOMEM. Delay a bit the initialization of zero_page in ceph_msgr_init and reorder its cleanup in _ceph_msgr_exit so it's done in reverse order of setup. BUG_ON() will not suffer to be postponed in case it is triggered. Signed-off-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-
Nicholas Krause authored
This removes the no longer used macro AES_KEY_SIZE as no functions use this macro anymore and thus this macro can be removed due it no longer being required. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-
Yan, Zheng authored
After forced umount, ceph_writepages_start() skips flushing dirty pages. To make sure inode's reference count get dropped to zero, we need to invalidate dirty pages. Signed-off-by: Yan, Zheng <zyan@redhat.com>
-
Yan, Zheng authored
This patch makes try_get_cap_refs() and __do_request() check if the file system was forced umount, and return -EIO if it was. This patch also adds a helper function to drops dirty caps and wakes up blocking operation. Signed-off-by: Yan, Zheng <zyan@redhat.com>
-
- 30 Aug, 2015 1 commit
-
-
Linus Torvalds authored
-
- 29 Aug, 2015 1 commit
-
-
Javi Merino authored
Commit cf736ea6 ("thermal: power_allocator: do not use devm* interfaces") forgot to change a devm_kcalloc() to just kcalloc(), but it's corresponding devm_kfree() was changed to kfree(). Allocate with kcalloc() to match the kfree(). Fixes: cf736ea6 ("thermal: power_allocator: do not use devm* interfaces") Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 28 Aug, 2015 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fixlet from Tejun Heo: "Simple blacklist entry addition" * 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: Add factory recertified Crucial M500s to blacklist
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Here are stable fixes that have been gathered since rc8: fixes for HD-audio widget power control regressions since 4.1, a NULL fix for HD-audio HDMI, a noise fix for Conexant codecs and a quirk addition for USB-Audio DSD" * tag 'sound-fix-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix path power activation ALSA: hda - Check all inputs for is_active_nid_for_any() ALSA: hda: fix possible NULL dereference ALSA: hda - Shutdown CX20722 on reboot/free to avoid spurious noises ALSA: usb: Add native DSD support for Gustard DAC-X20U
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Fix MSI/MSI-X on pseries from Guilherme" * tag 'powerpc-4.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/PCI: Disable MSI/MSI-X interrupts at PCI probe time in OF case PCI: Make pci_msi_setup_pci_dev() non-static for use by arch code
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Some straggler bug fixes here: 1) Netlink_sendmsg() doesn't check iterator type properly in mmap case, from Ken-ichirou MATSUZAWA. 2) Don't sleep in atomic context in bcmgenet driver, from Florian Fainelli. 3) The pfkey_broadcast() code patch can't actually ever use anything other than GFP_ATOMIC. And the cases that right now pass GFP_KERNEL or similar will currently trigger an RCU splat. Just use GFP_ATOMIC unconditionally. From David Ahern. 4) Fix FD bit timings handling in pcan_usb driver, from Marc Kleine-Budde. 5) Cache dst leaked in ip6_gre tunnel removal, fix from Huaibin Wang. 6) Traversal into drivers/net/ethernet/renesas should be triggered by CONFIG_NET_VENDOR_RENESAS, not a particular driver's config option. From Kazuya Mizuguchi. 7) Fix regression in handling of igmp_join errors in vxlan, from Marcelo Ricardo Leitner. 8) Make phy_{read,write}_mmd_indirect() properly take the mdio_lock mutex when programming the registers. From Russell King. 9) Fix non-forced handling in u32_destroy(), from WANG Cong. 10) Test the EVENT_NO_RUNTIME_PM flag before it is cleared in usbnet_stop(), from Eugene Shatokhin. 11) In sfc driver, don't fetch statistics firmware isn't capable of, from Bert Kenward. 12) Verify ASCONF address parameter location in SCTP, from Xin Long" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE state sctp: asconf's process should verify address parameter is in the beginning sfc: only use vadaptor stats if firmware is capable net: phy: fixed: propagate fixed link values to struct usbnet: Get EVENT_NO_RUNTIME_PM bit before it is cleared drivers: net: xgene: fix: Oops in linkwatch_fire_event cls_u32: complete the check for non-forced case in u32_destroy() net: fec: use reinit_completion() in mdio accessor functions net: phy: add locking to phy_read_mmd_indirect()/phy_write_mmd_indirect() vxlan: re-ignore EADDRINUSE from igmp_join net: compile renesas directory if NET_VENDOR_RENESAS is configured ip6_gre: release cached dst on tunnel removal phylib: Make PHYs children of their MDIO bus, not the bus' parent. can: pcan_usb: don't provide CAN FD bittimings by non-FD adapters net: Fix RCU splat in af_key net: bcmgenet: fix uncleaned dma flags net: bcmgenet: Avoid sleeping in bcmgenet_timeout netlink: mmap: fix tx type check
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull nvdimm fixlet from Dan Williams: "This is a libnvdimm ABI fixup. I pushed back on this change quite hard given the late date, that it appears to be purely cosmetic, sysfs is not necessarily meant to be a user friendly UI, and the kernel interprets the reversed polarity of the ACPI_NFIT_MEM_ARMED flag correctly. When this flag is set, the energy source of an NVDIMM is not armed and any new writes to the DIMM may not be preserved. However, Bob Moore warned me that it is important to get these things named correctly wherever they appear otherwise we run the risk of a less than cautious firmware engineer implementing the polarity the wrong way. Once a mistake like that escapes into production platforms the flag becomes useless and we need to move to a new bit position. Bob has agreed to take a change through ACPICA to rename ACPI_NFIT_MEM_ARMED to ACPI_NFIT_MEM_NOT_ARMED, and the patch below from Toshi brings the sysfs representation of these flags in line with their respective polarities. Please pull for 4.2 as this is the first kernel to expose the ACPI NFIT sysfs representation, and this is likely a kernel that firmware developers will be using for checking out their NVDIMM enabling" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit: Clarify memory device state flags strings
-
lucien authored
Commit f8d96052 ("sctp: Enforce retransmission limit during shutdown") fixed a problem with excessive retransmissions in the SHUTDOWN_PENDING by not resetting the association overall_error_count. This allowed the association to better enforce assoc.max_retrans limit. However, the same issue still exists when the association is in SHUTDOWN_RECEIVED state. In this state, HB-ACKs will continue to reset the overall_error_count for the association would extend the lifetime of association unnecessarily. This patch solves this by resetting the overall_error_count whenever the current state is small then SCTP_STATE_SHUTDOWN_PENDING. As a small side-effect, we end up also handling SCTP_STATE_SHUTDOWN_ACK_SENT and SCTP_STATE_SHUTDOWN_SENT states, but they are not really impacted because we disable Heartbeats in those states. Fixes: Commit f8d96052 ("sctp: Enforce retransmission limit during shutdown") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Aug, 2015 6 commits
-
-
lucien authored
in sctp_process_asconf(), we get address parameter from the beginning of the addip params. but we never check if it's really there. if the addr param is not there, it still can pass sctp_verify_asconf(), then to be handled by sctp_process_asconf(), it will not be safe. so add a code in sctp_verify_asconf() to check the address parameter is in the beginning, or return false to send abort. note that this can also detect multiple address parameters, and reject it. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Toshi Kani authored
ACPI 6.0 NFIT Memory Device State Flags in Table 5-129 defines NVDIMM status as follows. These bits indicate multiple info, such as failures, pending event, and capability. Bit [0] set to 1 to indicate that the previous SAVE to the Memory Device failed. Bit [1] set to 1 to indicate that the last RESTORE from the Memory Device failed. Bit [2] set to 1 to indicate that platform flush of data to Memory Device failed. As a result, the restored data content may be inconsistent even if SAVE and RESTORE do not indicate failure. Bit [3] set to 1 to indicate that the Memory Device is observed to be not armed prior to OSPM hand off. A Memory Device is considered armed if it is able to accept persistent writes. Bit [4] set to 1 to indicate that the Memory Device observed SMART and health events prior to OSPM handoff. /sys/bus/nd/devices/nmemX/nfit/flags shows this flags info. The output strings associated with the bits are "save", "restore", "smart", etc., which can be confusing as they may be interpreted as positive status, i.e. save succeeded. Change also the dev_info() message in acpi_nfit_register_dimms() to be consistent with the sysfs flags strings. Reported-by: Robert Elliott <elliott@hp.com> Signed-off-by: Toshi Kani <toshi.kani@hp.com> [ross: rename 'not_arm' to 'not_armed'] Cc: Ross Zwisler <ross.zwisler@linux.intel.com> [djbw: defer adding bit5, HEALTH_ENABLED, for now] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Bert Kenward authored
Some of the stats handling code differs based on SR-IOV support, and SRIOV support is only available if full-featured firmware is used. Do not use vadaptor stats if firmware mode is not set to full-featured. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
The fixed link values parsed from the device tree are stored in the struct fixed_phy member status. The struct phy_device members speed, duplex were not updated. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull amr64 kvm fix from Will Deacon: "We've uncovered a nasty bug in the arm64 KVM code which allows a badly behaved 32-bit guest to bring down the host. The fix is simple (it's what I believe we call a "brown paper bag" bug) and I don't think it makes sense to sit on this, particularly as Russell ended up triggering this rather than just somebody noticing a potential problem by inspection. Usually arm64 KVM changes would go via Paolo's tree, but he's on holiday at the moment and the deal is that anything urgent gets shuffled via the arch trees, so here it is. Summary: Fix arm64 KVM issue when injecting an abort into a 32-bit guest, which would lead to an illegal exception return at EL2 and a subsequent host crash" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: KVM: Fix host crash when injecting a fault into a 32bit guest
-
Marc Zyngier authored
When injecting a fault into a misbehaving 32bit guest, it seems rather idiotic to also inject a 64bit fault that is only going to corrupt the guest state. This leads to a situation where we perform an illegal exception return at EL2 causing the host to crash instead of killing the guest. Just fix the stupid bug that has been there from day 1. Cc: <stable@vger.kernel.org> Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
-
- 26 Aug, 2015 9 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Two fixes in this pull request: - The writeback regression fix from Tejun, which has been weeks in the making. This fixes a case where we would sometimes not issue writeback when we should have. - An older fix for a memory corruption issue in mtip32xx. It was deferred since we wanted a better fix for this (driver should not have to handle that case), but given the timing, it's better to put the simple fix in for 4.2 release" * 'for-linus' of git://git.kernel.dk/linux-block: mtip32x: fix regression introduced by blk-mq per-hctx flush writeback: sync_inodes_sb() must write out I_DIRTY_TIME inodes and always call wait_sb_inodes()
-
Guillermo A. Amaral authored
The Crucial M500 is known to have issues with queued TRIM commands, the factory recertified SSDs use a different model number naming convention which causes them to get ignored by the blacklist. The new naming convention boils down to: s/Crucial_/FC/ Signed-off-by: Guillermo A. Amaral <g@maral.me> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
-
Guilherme G. Piccoli authored
Since commit 1851617c ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI"), the setup of dev->msi_cap/msix_cap and the disable of MSI/MSI-X interrupts isn't being done at PCI probe time, as the logic responsible for this was moved in the aforementioned commit from pci_device_add() to pci_setup_device(). The latter function is not reachable on PowerPC pseries platform during Open Firmware PCI probing time. This exhibits as drivers not being able to enable MSI, eg: bnx2x 0000:01:00.0: no msix capability found This patch calls pci_msi_setup_pci_dev() explicitly to disable MSI/MSI-X during PCI probe time on pSeries platform. Fixes: 1851617c ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") [mpe: Flesh out change log and clarify comment] Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Guilherme G. Piccoli authored
Commit 1851617c ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") changed the location of the code that initialises dev->msi_cap/msix_cap and then disables MSI/MSI-X interrupts at PCI probe time in devices that have this flag set. It moved the code from pci_msi_init_pci_dev() to a new function named pci_msi_setup_pci_dev(), called by pci_setup_device(). The pseries PCI probing code does not call pci_setup_device(), so since the aforementioned commit the function pci_msi_setup_pci_dev() is not called and MSI/MSI-X interrupts are left enabled. Additionally because dev->msi_cap/msix_cap are not initialised no driver can ever enable MSI/MSI-X. To fix this, the pseries PCI probe should manually call pci_msi_setup_pci_dev(), so this patch makes it non-static. Fixes: 1851617c ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") [mpe: Update change log to mention dev->msi_cap/msix_cap] Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Eugene Shatokhin authored
It is needed to check EVENT_NO_RUNTIME_PM bit of dev->flags in usbnet_stop(), but its value should be read before it is cleared when dev->flags is set to 0. The problem was spotted and the fix was provided by Oliver Neukum <oneukum@suse.de>. Signed-off-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull LSM regression fix from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: LSM: restore certain default error codes
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull nvdimm fix from Dan Williams: "A single fix for status register read size in the nd_blk driver. The effect of getting the width of this register read wrong is that all I/O fails when the read returns non-zero. Given the availability of ACPI 6 NFIT enabled platforms, this could reasonably wait to come in during the 4.3 merge window with a tag for 4.2-stable. Otherwise, this makes the 4.2 kernel fully functional with devices that conform to the mmio-block-apertures defined in the ACPI 6 NFIT (NVDIMM Firmware Interface Table)" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit, nd_blk: BLK status register is only 32 bits
-
Iyappan Subramanian authored
[ 1065.801569] Internal error: Oops: 96000006 [#1] SMP ... [ 1065.866655] Hardware name: AppliedMicro Mustang/Mustang, BIOS 1.1.0 Apr 22 2015 [ 1065.873937] Workqueue: events_power_efficient phy_state_machine [ 1065.879837] task: fffffe01de105e80 ti: fffffe00bcf18000 task.ti: fffffe00bcf18000 [ 1065.887288] PC is at linkwatch_fire_event+0xac/0xc0 [ 1065.892141] LR is at linkwatch_fire_event+0xa0/0xc0 [ 1065.896995] pc : [<fffffe000060284c>] lr : [<fffffe0000602840>] pstate: 200001c5 [ 1065.904356] sp : fffffe00bcf1bd00 ... [ 1066.196813] Call Trace: [ 1066.199248] [<fffffe000060284c>] linkwatch_fire_event+0xac/0xc0 [ 1066.205140] [<fffffe000061167c>] netif_carrier_off+0x54/0x64 [ 1066.210773] [<fffffe00004f1654>] phy_state_machine+0x120/0x3bc [ 1066.216578] [<fffffe00000d8d10>] process_one_work+0x15c/0x3a8 [ 1066.222296] [<fffffe00000d9090>] worker_thread+0x134/0x470 [ 1066.227757] [<fffffe00000df014>] kthread+0xe0/0xf8 [ 1066.232525] Code: 97f65ee9 f9420660 d538d082 8b000042 (885f7c40) The fix is to call phy_disconnect() from xgene_enet_mdio_remove, which in turn call cancel_delayed_work_sync(). Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
WANG Cong authored
In commit 1e052be6 ("net_sched: destroy proto tp when all filters are gone") I added a check in u32_destroy() to see if all real filters are gone for each tp, however, that is only done for root_ht, same is needed for others. This can be reproduced by the following tc commands: tc filter add dev eth0 parent 1:0 prio 5 handle 15: protocol ip u32 divisor 256 tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:2 u32 ht 15:2: match ip src 10.0.0.2 flowid 1:10 tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:3 u32 ht 15:2: match ip src 10.0.0.3 flowid 1:10 Fixes: 1e052be6 ("net_sched: destroy proto tp when all filters are gone") Reported-by: Akshat Kakkar <akshat.1984@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Aug, 2015 3 commits
-
-
Jan Beulich authored
While in most cases commit b1d9e6b0 ("LSM: Switch to lists of hooks") retained previous error returns, in three cases it altered them without any explanation in the commit message. Restore all of them - in the security_old_inode_init_security() case this led to reiserfs using uninitialized data, sooner or later crashing the system (the only other user of this function - ocfs2 - was unaffected afaict, since it passes pre-initialized structures). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
-
Ross Zwisler authored
Only read 32 bits for the BLK status register in read_blk_stat(). The format and size of this register is defined in the "NVDIMM Driver Writer's guide": http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdfSigned-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Tested-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Russell King authored
Rather than re-initialising the entire completion on every mdio access, use reinit_completion() which only resets the completion count. This avoids possible reinitialisation of the contained spinlock and waitqueue while they may be in use (eg, mid-completion.) Such an event could occur if there's a long delay in interrupt handling causing the mdio accessor to time out, then a second access comes in while the interrupt handler on a different CPU has called complete(). Another scenario where this has been observed is while locking has been missing at the phy layer, allowing concurrent attempts to access the MDIO bus. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-