Add pcode mailbox write emulation in gvt for BDW, reuse emulation code of
Skylake.

V2: refine comments, remove duplication defination of 0x138124, add
IS_SKYLAKE() check for Skylake only pcode commands.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

This assigns resolution definition for each vGPU type. For smaller
resource type we should limit max resolution, so e.g limit to 1024x768
for 64M type, others are still default to 1920x1200.

v2: Fix for actual 1920x1200 resolution
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

We'll need to apply different resolution for vgpu types, so this
adds more EDID types definition.

v2: fix typo for actual 1920x1200 resolution
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Previous vGPU type create tried to determine vGPU type name e.g _1, _2
based on the number of mdev devices can be created, but different type
might have very different resource size depending on physical device.
We need to split type name vs. actual mdev resource and create fixed
vGPU type with determined size for consistence.

With this we'd like to fix vGPU types for _1, _2, _4 and _8 now, each
type has fixed defined resource size. Available mdev instances that could
be created is determined by physical resource, and user should query
for that before creating.

Cc: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

The guest VM may initialize the whole GTT table during boot up,
so the warning msg in emulate_gtt_mmio_write is not necessary, it is
the expected behavior and it may confuse the user if error msg is
printed out, so remove the msg from emulate_gtt_mmio_write(),
Signed-off-by: Zhao, Xinda <xinda.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

In GVT-g we always emulate as pcode read/write success and ready for access
anytime, since we don't touch real physical registers here.

Add 'SKL_PCODE_CDCLK_CONTROL' write emulation, without it will cause
skl_set_cdclk fail in guest.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Releasing shadow PPGTT pages is not enough when vGPU reset, the
guest page table tracking data should has same life-cycle with
all the shadow PPGTT pages; Otherwise there is no chance to
re-shadow the PPGTT pages without free the guest page table
tracking data.

This patch clear the PPGTT reset logic and make the vGPU reset in
working order.

v2: refactor some logic to avoid code duplicated.
v3: remove useless macro and add comments from Christophe.
v4: keep reset logic in reset function.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

When untracked mmio is visited, too many log info will be printed out,
it may confuse the user, but most of the time, it is not the urgent case,
so use gvt_dbg_mmio() instead.
Signed-off-by: Zhao, Xinda <xinda.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

for a handled mmio reg,  its default value is read from hardware, while
for an unhandled mmio regs,  its default value would be random if not
explicitly set to 0
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Linux guest is using this MMIO in lri command. Add cmd_access flag
for this mmio in gvt to avoid error log.

v2: change the mmio address to its macro name
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

add a whitelist to check the content of force-nonpriv registers

v3:
per He Min's comment, modify in_whitelist()'s return type to bool, and use
negative value as the return value for failure for force_nonpriv_write().

v2:
1. split a big patch into two smaller ones per zhenyu's comment.
this patch is the mmio handling part for force-nopriv registers

2. per zhenyu's comment, combine all non-priv registers into a single
MMIO_DFH entry
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

the value of those registers should be applied to hardware on
context restoring
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

send_display_send_uevent() sends two environment variable, and the
first one GVT_DISPLAY_READY is set including a new line at the end of
the string; that is obviously superfluous and wrong -- at least, it
*looks* so when you only read the code.

However, it doesn't appear in the actual output by a (supposedly
unexpected) trick.  The code uses snprintf() and truncates the string
in size 20 bytes.  This makes the string as GVT_DISPLAY_READY=0 or
...=1 including the trailing NUL-letter.  That is, the '\n' found in
the format string is always cut off as a result.

Although the code gives the correct result, it is confusing.  This
patch addresses it, just removing the superfluous '\n' from the format
string for avoiding further confusion.  If the argument "ready" were
not a  bool, the size 20 should be corrected as well.  But it's a
bool, so we can leave the magic number 20 as is for now.

FWIW, the bug was spotted by a new GCC7 warning:
  drivers/gpu/drm/i915/gvt/handlers.c: In function 'pvinfo_mmio_write':
  drivers/gpu/drm/i915/gvt/handlers.c:1042:34: error: 'snprintf' output truncated before the last format character [-Werror=format-truncation=]
    snprintf(display_ready_str, 20, "GVT_DISPLAY_READY=%d\n", ready);
                                    ^~~~~~~~~~~~~~~~~~~~~~~~
  drivers/gpu/drm/i915/gvt/handlers.c:1042:2: note: 'snprintf' output 21 bytes into a destination of size 20
    snprintf(display_ready_str, 20, "GVT_DISPLAY_READY=%d\n", ready);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 04d348ae ("drm/i915/gvt: vGPU display virtualization")
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1025903Reported-by: Richard Biener <rguenther@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

some registers were missing or treated as BDW only. This patch is to fix it
avoid unhandled mmio wanrings

v2: update commit message according to zhenyu's comment
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Due to the request replay, context switch interrupt may come after
gvt free the workload thus can cause a kernel NULL pointer kernel
panic. This patch will add a simple check to avoid this for a short
term.

From long term, gvt workload lifecycle doesn't match with i915 request
and need to find a proper way to manage this.

v4: simplify the NULL pointer check.
v5: add unlikely to optimize.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Windows guest will notitfy GVT-g to request more resources through g2v
interface, when its resources are not enough.
This patch is to handle this case and let vgpu enter failsafe mode to
avoid too many error messages.
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Lots of reduntant log info will be printed out during GPU reset,
including accessing untracked mmio register and fence register,
variable disable_warn_untrack is added previously to handle the
situation, but the accessing of fence register is ignored in the
previously patch, so add it back.

Besides, set the variable disable_warn_untrack to the defalut value
after GPU reset is finished.
Signed-off-by: Zhao, Xinda <xinda.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

New failsafe mode is introduced, when we detect guest not supporting
GVT-g.
In failsafe mode, we will ignore all the MMIO and cfg space read/write
from guest.

This patch can fix the issue that when guest kernel or graphics driver
version is too low, there will be a lot of kernel traces in host.

V5: rebased onto latest gvt-staging
V4: changed coding style by Zhenyu and Ping's advice
V3: modified coding style and error messages according to Zhenyu's comment
V2: 1) implemented MMIO/GTT/WP pages read/write logic; 2) used a unified
function to enter failsafe mode
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

As we switched to memremap for opregion, shouldn't use any __iomem
for that, and move to use memcpy instead.

This fixed static check errors for:

  CHECK   drivers/gpu/drm/i915//gvt/opregion.c
  drivers/gpu/drm/i915//gvt/opregion.c:142:31: warning: incorrect type in argument 1 (different address spaces)
  drivers/gpu/drm/i915//gvt/opregion.c:142:31:    expected void *addr
  drivers/gpu/drm/i915//gvt/opregion.c:142:31:    got void [noderef] <asn:2>*opregion_va
  drivers/gpu/drm/i915//gvt/opregion.c:160:35: warning: incorrect type in assignment (different address spaces)
  drivers/gpu/drm/i915//gvt/opregion.c:160:35:    expected void [noderef] <asn:2>*opregion_va
  drivers/gpu/drm/i915//gvt/opregion.c:160:35:    got void *
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

When doing dma map failed for a pfn, kvmgt should unpin the
pfn and return error code to device module driver
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: xinda.zhao@intel.com
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

For the inhibit ctx, load all mmio in render mmio list
into HW by MMIO write for ctx initialization.

For the none-inhibit ctx, only load the render mmio which
is not in_context into HW by MMIO write. Skip the MMIO write
for in_context mmio as context image will load it.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

* Add flip done event support for sprite plane on SKL platform.
* Fix bug #1452, "Call Trace:handle_default_event_virt+0xef/0x100
[i915]" while booting up guest.
Signed-off-by: Xu Han <xu.han@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

We also need reset vGPU virtual display emulation. Since all vreg has
been cleared, we need reset display related vreg to reflect our display
setting.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

We need to be careful to only update addr mode for gvt shadow context
descriptor but keep other valid config. This fixes GPU hang caused by
invalid descriptor submitted for gvt workload.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

We need to properly setup alignment for GTT start/end/size
as required. Fixed warning from i915 gem.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

In function dispatch_workload(), if it fail before calling
intel_gvt_scan_and_shadow_wa_ctx(), the indirect ctx will
not be shadowed so no cleaup need. wa_ctx->indirect_ctx.obj
indicate whether indirect_ctx is shadowed. The obj is null
if it is unshadowed.

BUG: unable to handle kernel NULL pointer dereference at
00000000000001a0
IP: complete_execlist_workload+0x2c9/0x3e0 [i915]
Oops: 0002 [#1] SMP
task: ffff939546d2d880 task.stack: ffffbd9b82ac4000
RIP: 0010:complete_execlist_workload+0x2c9/0x3e0 [i915]
RSP: 0018:ffffbd9b82ac7dd8 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff9393c725b540 RCX: 0000000000000006
RDX: 0000000000000007 RSI: 0000000000000202 RDI: ffff939559c8dd00
RBP: ffffbd9b82ac7e18 R08: 0000000000000001 R09: 000000000120dd8f
R10: 0000000000000000 R11: 000000000120dd8f R12: ffff9393c725b540
R13: ffff9393c725b618 R14: ffffbd9b81f0d000 R15: ffff939520e0e000
FS:  0000000000000000(0000) GS:ffff939559c80000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000001a0 CR3: 000000043d664000 CR4: 00000000003426e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 workload_thread+0x312/0xd70 [i915]
 ? __wake_up_sync+0x20/0x20
 ? wake_atomic_t_function+0x60/0x60
 kthread+0x101/0x140
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

gvt driver has a check which doesn't allow to use gvt when host
gpu iommu is enabled. This check can be removed after enable the
iommu support in gvt
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

When host i915 iommu enabled, gvt needs to use a mapped pfn in PTE entry
So before kvm returns the pfn, map this pfn and return the mapped address
which is so called iova.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

MFN usually refers to "Machine Frame Number" in virtulization world.
Currently GVT-g populates the shadow PPGTT/GGTT page table with MFN
according to the translation between MFN and Guest PFN.

When host IOMMU is enabled, GPU DMA transactions go through the IOMMU,
GPU needs an IOVA<->MFN mapping to walk the shadow page table in host
main memory.

This patch will map a page in IOMMU page table before using it in shadow
page table and release the map when a shadow page is going to be freed.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Reduce the line of logs in below functions and log friendly.
  o intel_vgpu_reg_imr_handler
  o intel_vgpu_reg_master_irq_handler
  o intel_vgpu_reg_ier_handler
  o intel_vgpu_reg_iir_handler
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Remove a redundant end of line in below log.
  'will complete workload %p\n, status: %d\n'
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Remove below unimportant log which is too noisy.
  'no current vgpu search from q head'
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

"caps.buf" is always NULL here and "caps.size" is always zero.  The code
is a no-op and can be removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

As now gvt init after knowing hw resource info, we can determine vGPU
type from machine size instead of pre-defined value.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

As now gvt init is late after MMIO initialization, use normal MMIO
read function for initial firmware exposure if no available firmware
loaded.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

We only depend on pvinfo register for GVT-g state detection,
not require hypervisor host detect any more.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Prepare to remove detect_host() hook. Move intel iommu detection early
in intel_gvt_init().
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Previously intel_gvt_init() was called very early even before
MMIO initialization which had several drawbacks:
- Have to handle MMIO access for initial MMIO state dump if golden
  state firmware is not available
- Hypervisor detection should depend on pvinfo only instead of detecting
  hypervisor status.
- Don't know hw resource size e.g aperture, ggtt size to determine
  for vGPU type, etc.

This trys to move intel_gvt_init() call late after required info
has already been initialized for GVT host.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

The current virtual edid can only support the resolution up
to 1024x768. Update the virtual edid so that can support more
resoltions. With this new virtual edid, resolution can
be up to 1920x1200.

V2: add detailed modeline description in edid code comments
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

adding runtime PM support to MIC driver, and including some
cleanups - especially using atomic helper functions
instead of specific ones - and fixups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: g2d: prevent integer overflow in
  drm/exynos: fix a timeout loop
  drm/exynos: use atomic helper commit
  drm/exynos: remove unnecessary codes
  drm/exynos: mic: Add runtime PM support
  drm/exynos: Stop using drm_framebuffer_unregister_private
  drm/exynos: mic: Fix parse_dt function
  drm/exynos: mic: Add mode_set callback function