- 03 Oct, 2024 18 commits
-
-
Xin Long authored
In sctp_listen_start() invoked by sctp_inet_listen(), it should set the sk_state back to CLOSED if sctp_autobind() fails due to whatever reason. Otherwise, next time when calling sctp_inet_listen(), if sctp_sk(sk)->reuse is already set via setsockopt(SCTP_REUSE_PORT), sctp_sk(sk)->bind_hash will be dereferenced as sk_state is LISTENING, which causes a crash as bind_hash is NULL. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_inet_listen+0x7f0/0xa20 net/sctp/socket.c:8617 Call Trace: <TASK> __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] Fixes: 5e8f3f70 ("sctp: simplify sctp listening code") Reported-by: syzbot+f4e0f821e3a3b7cee51d@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://patch.msgid.link/a93e655b3c153dc8945d7a812e6d8ab0d52b7aa0.1727729391.git.lucien.xin@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Ravikanth Tuniki authored
Add missing reg minItems as based on current binding document only ethernet MAC IO space is a supported configuration. There is a bug in schema, current examples contain 64-bit addressing as well as 32-bit addressing. The schema validation does pass incidentally considering one 64-bit reg address as two 32-bit reg address entries. If we change axi_ethernet_eth1 example node reg addressing to 32-bit schema validation reports: Documentation/devicetree/bindings/net/xlnx,axi-ethernet.example.dtb: ethernet@40000000: reg: [[1073741824, 262144]] is too short To fix it add missing reg minItems constraints and to make things clearer stick to 32-bit addressing in examples. Fixes: cbb1ca6d ("dt-bindings: net: xlnx,axi-ethernet: convert bindings document to yaml") Signed-off-by:
Ravikanth Tuniki <ravikanth.tuniki@amd.com> Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/1727723615-2109795-1-git-send-email-radhey.shyam.pandey@amd.comSigned-off-by:
-
Sean Anderson authored
Since commit 8380c81d ("net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT"), napi_schedule_irqoff will do the right thing if IRQs are threaded. Therefore, there is no need to use IRQF_NO_THREAD. Signed-off-by:
Sean Anderson <sean.anderson@linux.dev> Reviewed-by:
Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20240930153955.971657-1-sean.anderson@linux.devSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix incorrect documentation in uapi/linux/netfilter/nf_tables.h regarding flowtable hooks, from Phil Sutter. 2) Fix nft_audit.sh selftests with newer nft binaries, due to different (valid) audit output, also from Phil. 3) Disable BH when duplicating packets via nf_dup infrastructure, otherwise race on nf_skb_duplicated for locally generated traffic. From Eric. 4) Missing return in callback of selftest C program, from zhang jiao. netfilter pull request 24-10-02 * tag 'nf-24-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: netfilter: Add missing return value netfilter: nf_tables: prevent nf_skb_duplicated corruption selftests: netfilter: Fix nft_audit.sh for newer nft binaries netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED ==================== Link: https://patch.msgid.link/20241002202421.1281311-1-pablo@netfilter.orgSigned-off-by:
-
Eddie James authored
The work function can run after the ncsi device is freed, resulting in use-after-free bugs or kernel panic. Fixes: 2d283bdd ("net/ncsi: Resource management") Signed-off-by:
Eddie James <eajames@linux.ibm.com> Link: https://patch.msgid.link/20240925155523.1017097-1-eajames@linux.ibm.comSigned-off-by:
-
FUJITA Tomonori authored
Fix the following warning when the driver is compiled as built-in: warning: unused import: `DeviceId` --> drivers/net/phy/qt2025.rs:18:5 | 18 | DeviceId, Driver, | ^^^^^^^^ | = note: `#[warn(unused_imports)]` on by default device_table in module_phy_driver macro is defined only when the driver is built as a module. Use phy::DeviceId in the macro instead of importing `DeviceId` since `phy` is always used. Fixes: fd3eaad8 ("net: phy: add Applied Micro QT2025 PHY driver") Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202409190717.i135rfVo-lkp@intel.com/Reviewed-by:
Alice Ryhl <aliceryhl@google.com> Reviewed-by:
Trevor Gross <tmgross@umich.edu> Signed-off-by:
FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by:
Fiona Behrens <me@kloenk.dev> Acked-by:
Miguel Ojeda <ojeda@kernel.org> Link: https://patch.msgid.link/20240926121404.242092-1-fujita.tomonori@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Willem de Bruijn authored
Detect gso fraglist skbs with corrupted geometry (see below) and pass these to skb_segment instead of skb_segment_list, as the first can segment them correctly. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify these skbs, breaking these invariants. In extreme cases they pull all data into skb linear. For UDP, this causes a NULL ptr deref in __udpv4_gso_segment_list_csum at udp_hdr(seg->next)->dest. Detect invalid geometry due to pull, by checking head_skb size. Don't just drop, as this may blackhole a destination. Convert to be able to pass to regular skb_segment. Link: https://lore.kernel.org/netdev/20240428142913.18666-1-shiming.cheng@mediatek.com/ Fixes: 9fd1ff5d ("udp: Support UDP fraglist GRO/GSO.") Signed-off-by:
Willem de Bruijn <willemb@google.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20241001171752.107580-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Ido Schimmel authored
When user space deletes a port from an MDB entry, the port is removed synchronously. If this was the last port in the entry and the entry is not joined by the host itself, then the entry is scheduled for deletion via a timer. The above means that it is possible for the MDB get netlink request to retrieve an empty entry which is scheduled for deletion. This is problematic as after deleting the last port in an entry, user space cannot rely on a non-zero return code from the MDB get request as an indication that the port was successfully removed. Fix by returning an error when the entry's port list is empty and the entry is not joined by the host. Fixes: 68b380a3 ("bridge: mcast: Add MDB get support") Reported-by:
Jamie Bainbridge <jamie.bainbridge@gmail.com> Closes: https://lore.kernel.org/netdev/c92569919307749f879b9482b0f3e125b7d9d2e3.1726480066.git.jamie.bainbridge@gmail.com/Tested-by:
Ido Schimmel <idosch@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20240929123640.558525-1-idosch@nvidia.comSigned-off-by:
-
Willem de Bruijn authored
This reverts commit 504fc6f4. dev_queue_xmit_nit is expected to be called with BH disabled. __dev_queue_xmit has the following: /* Disable soft irqs for various locks below. Also * stops preemption for RCU. */ rcu_read_lock_bh(); VRF must follow this invariant. The referenced commit removed this protection. Which triggered a lockdep warning: ================================ WARNING: inconsistent lock state 6.11.0 #1 Tainted: G W -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. btserver/134819 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff8882da30c118 (rlock-AF_PACKET){+.?.}-{2:2}, at: tpacket_rcv+0x863/0x3b30 {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x19a/0x4f0 _raw_spin_lock+0x27/0x40 packet_rcv+0xa33/0x1320 __netif_receive_skb_core.constprop.0+0xcb0/0x3a90 __netif_receive_skb_list_core+0x2c9/0x890 netif_receive_skb_list_internal+0x610/0xcc0 [...] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rlock-AF_PACKET); <Interrupt> lock(rlock-AF_PACKET); *** DEADLOCK *** Call Trace: <TASK> dump_stack_lvl+0x73/0xa0 mark_lock+0x102e/0x16b0 __lock_acquire+0x9ae/0x6170 lock_acquire+0x19a/0x4f0 _raw_spin_lock+0x27/0x40 tpacket_rcv+0x863/0x3b30 dev_queue_xmit_nit+0x709/0xa40 vrf_finish_direct+0x26e/0x340 [vrf] vrf_l3_out+0x5f4/0xe80 [vrf] __ip_local_out+0x51e/0x7a0 [...] Fixes: 504fc6f4 ("vrf: Remove unnecessary RCU-bh critical section") Link: https://lore.kernel.org/netdev/20240925185216.1990381-1-greearb@candelatech.com/Reported-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240929061839.1175300-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Dan Carpenter authored
This error handling has a typo. It should i++ instead of i--. In the original code the error handling will loop until it crashes. Fixes: da70d184 ("net: ethernet: ti: am65-cpsw: Introduce multi queue Rx") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Link: https://patch.msgid.link/8e7960cc-415d-48d7-99ce-f623022ec7b5@stanley.mountainSigned-off-by:
-
Hui Wang authored
Just like rtl8211f_led_hw_is_supported() and rtl8211f_led_hw_control_set(), the rtl8211f_led_hw_control_get() also needs to check the index value, otherwise the caller is likely to get an incorrect rules. Fixes: 17784801 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F") Signed-off-by:
Hui Wang <hui.wang@canonical.com> Reviewed-by:
Marek Vasut <marex@denx.de> Link: https://patch.msgid.link/20240927114610.1278935-1-hui.wang@canonical.comSigned-off-by:
-
Eric Dumazet authored
Networking receive path is usually handled from BH handler. However, some protocols need to acquire the socket lock, and packets might be stored in the socket backlog is the socket was owned by a user process. In this case, release_sock(), __release_sock(), and sk_backlog_rcv() might call the sk->sk_backlog_rcv() handler in process context. sybot caught ppp was not considering this case in ppp_channel_bridge_input() : WARNING: inconsistent lock state 6.11.0-rc7-syzkaller-g5f5673607153 #0 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. ksoftirqd/1/24 [HC0[0]:SC1[1]:HE1:SE0] takes: ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline] ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304 {SOFTIRQ-ON-W} state was registered at: lock_acquire+0x240/0x728 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x48/0x60 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline] ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304 pppoe_rcv_core+0xfc/0x314 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x1a8/0x3d8 net/core/sock.c:3004 release_sock+0x68/0x1b8 net/core/sock.c:3558 pppoe_sendmsg+0xc8/0x5d8 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x374/0x4f4 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __arm64_sys_sendto+0xd8/0xf8 net/socket.c:2212 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 irq event stamp: 282914 hardirqs last enabled at (282914): [<ffff80008b42e30c>] __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:151 [inline] hardirqs last enabled at (282914): [<ffff80008b42e30c>] _raw_spin_unlock_irqrestore+0x38/0x98 kernel/locking/spinlock.c:194 hardirqs last disabled at (282913): [<ffff80008b42e13c>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] hardirqs last disabled at (282913): [<ffff80008b42e13c>] _raw_spin_lock_irqsave+0x2c/0x7c kernel/locking/spinlock.c:162 softirqs last enabled at (282904): [<ffff8000801f8e88>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (282904): [<ffff8000801f8e88>] handle_softirqs+0xa3c/0xbfc kernel/softirq.c:582 softirqs last disabled at (282909): [<ffff8000801fbdf8>] run_ksoftirqd+0x70/0x158 kernel/softirq.c:928 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&pch->downl); <Interrupt> lock(&pch->downl); *** DEADLOCK *** 1 lock held by ksoftirqd/1/24: #0: ffff80008f74dfa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire+0x10/0x4c include/linux/rcupdate.h:325 stack backtrace: CPU: 1 UID: 0 PID: 24 Comm: ksoftirqd/1 Not tainted 6.11.0-rc7-syzkaller-g5f5673607153 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:319 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:326 __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0xe4/0x150 lib/dump_stack.c:119 dump_stack+0x1c/0x28 lib/dump_stack.c:128 print_usage_bug+0x698/0x9ac kernel/locking/lockdep.c:4000 mark_lock_irq+0x980/0xd2c mark_lock+0x258/0x360 kernel/locking/lockdep.c:4677 __lock_acquire+0xf48/0x779c kernel/locking/lockdep.c:5096 lock_acquire+0x240/0x728 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x48/0x60 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline] ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304 ppp_async_process+0x98/0x150 drivers/net/ppp/ppp_async.c:495 tasklet_action_common+0x318/0x3f4 kernel/softirq.c:785 tasklet_action+0x68/0x8c kernel/softirq.c:811 handle_softirqs+0x2e4/0xbfc kernel/softirq.c:554 run_ksoftirqd+0x70/0x158 kernel/softirq.c:928 smpboot_thread_fn+0x4b0/0x90c kernel/smpboot.c:164 kthread+0x288/0x310 kernel/kthread.c:389 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Fixes: 4cf476ce ("ppp: add PPPIOCBRIDGECHAN and PPPIOCUNBRIDGECHAN ioctls") Reported-by: syzbot+bd8d55ee2acd0a71d8ce@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/66f661e2.050a0220.38ace9.000f.GAE@google.com/T/#uSigned-off-by:Eric Dumazet <edumazet@google.com> Cc: Tom Parkin <tparkin@katalix.com> Cc: James Chapman <jchapman@katalix.com> Link: https://patch.msgid.link/20240927074553.341910-1-edumazet@google.comSigned-off-by:
-
Hangbin Liu authored
The include.sh file is generated for inclusion and should not be executable. Otherwise, it will be added to kselftest-list.txt. Additionally, add the executable bit for test.py at the same time to ensure proper functionality. Fixes: 3ade6ce1 ("selftests: rds: add testing infrastructure") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20240927041349.81216-1-liuhangbin@gmail.comSigned-off-by:
-
Eric Dumazet authored
syzbot was able to trigger this warning [1], after injecting a malicious packet through af_packet, setting skb->csum_start and thus the transport header to an incorrect value. We can at least make sure the transport header is after the end of the network header (with a estimated minimal size). [1] [ 67.873027] skb len=4096 headroom=16 headlen=14 tailroom=0 mac=(-1,-1) mac_len=0 net=(16,-6) trans=10 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0xa start=10 offset=0 ip_summed=3 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x0800 pkttype=0 iif=0 priority=0x0 mark=0x0 alloc_cpu=10 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 67.877172] dev name=veth0_vlan feat=0x000061164fdd09e9 [ 67.877764] sk family=17 type=3 proto=0 [ 67.878279] skb linear: 00000000: 00 00 10 00 00 00 00 00 0f 00 00 00 08 00 [ 67.879128] skb frag: 00000000: 0e 00 07 00 00 00 28 00 08 80 1c 00 04 00 00 02 [ 67.879877] skb frag: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.880647] skb frag: 00000020: 00 00 02 00 00 00 08 00 1b 00 00 00 00 00 00 00 [ 67.881156] skb frag: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.881753] skb frag: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882173] skb frag: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882790] skb frag: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883171] skb frag: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883733] skb frag: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.884206] skb frag: 00000090: 00 00 00 00 00 00 00 00 00 00 69 70 76 6c 61 6e [ 67.884704] skb frag: 000000a0: 31 00 00 00 00 00 00 00 00 00 2b 00 00 00 00 00 [ 67.885139] skb frag: 000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.885677] skb frag: 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886042] skb frag: 000000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886408] skb frag: 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887020] skb frag: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887384] skb frag: 00000100: 00 00 [ 67.887878] ------------[ cut here ]------------ [ 67.887908] offset (-6) >= skb_headlen() (14) [ 67.888445] WARNING: CPU: 10 PID: 2088 at net/core/dev.c:3332 skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.889353] Modules linked in: macsec macvtap macvlan hsr wireguard curve25519_x86_64 libcurve25519_generic libchacha20poly1305 chacha_x86_64 libchacha poly1305_x86_64 dummy bridge sr_mod cdrom evdev pcspkr i2c_piix4 9pnet_virtio 9p 9pnet netfs [ 67.890111] CPU: 10 UID: 0 PID: 2088 Comm: b363492833 Not tainted 6.11.0-virtme #1011 [ 67.890183] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 67.890309] RIP: 0010:skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891043] Call Trace: [ 67.891173] <TASK> [ 67.891274] ? __warn (kernel/panic.c:741) [ 67.891320] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891333] ? report_bug (lib/bug.c:180 lib/bug.c:219) [ 67.891348] ? handle_bug (arch/x86/kernel/traps.c:239) [ 67.891363] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) [ 67.891372] ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) [ 67.891388] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891399] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891416] ip_do_fragment (net/ipv4/ip_output.c:777 (discriminator 1)) [ 67.891448] ? __ip_local_out (./include/linux/skbuff.h:1146 ./include/net/l3mdev.h:196 ./include/net/l3mdev.h:213 net/ipv4/ip_output.c:113) [ 67.891459] ? __pfx_ip_finish_output2 (net/ipv4/ip_output.c:200) [ 67.891470] ? ip_route_output_flow (./arch/x86/include/asm/preempt.h:84 (discriminator 13) ./include/linux/rcupdate.h:96 (discriminator 13) ./include/linux/rcupdate.h:871 (discriminator 13) net/ipv4/route.c:2625 (discriminator 13) ./include/net/route.h:141 (discriminator 13) net/ipv4/route.c:2852 (discriminator 13)) [ 67.891484] ipvlan_process_v4_outbound (drivers/net/ipvlan/ipvlan_core.c:445 (discriminator 1)) [ 67.891581] ipvlan_queue_xmit (drivers/net/ipvlan/ipvlan_core.c:542 drivers/net/ipvlan/ipvlan_core.c:604 drivers/net/ipvlan/ipvlan_core.c:670) [ 67.891596] ipvlan_start_xmit (drivers/net/ipvlan/ipvlan_main.c:227) [ 67.891607] dev_hard_start_xmit (./include/linux/netdevice.h:4916 ./include/linux/netdevice.h:4925 net/core/dev.c:3588 net/core/dev.c:3604) [ 67.891620] __dev_queue_xmit (net/core/dev.h:168 (discriminator 25) net/core/dev.c:4425 (discriminator 25)) [ 67.891630] ? skb_copy_bits (./include/linux/uaccess.h:233 (discriminator 1) ./include/linux/uaccess.h:260 (discriminator 1) ./include/linux/highmem-internal.h:230 (discriminator 1) net/core/skbuff.c:3018 (discriminator 1)) [ 67.891645] ? __pskb_pull_tail (net/core/skbuff.c:2848 (discriminator 4)) [ 67.891655] ? skb_partial_csum_set (net/core/skbuff.c:5657) [ 67.891666] ? virtio_net_hdr_to_skb.constprop.0 (./include/linux/skbuff.h:2791 (discriminator 3) ./include/linux/skbuff.h:2799 (discriminator 3) ./include/linux/virtio_net.h:109 (discriminator 3)) [ 67.891684] packet_sendmsg (net/packet/af_packet.c:3145 (discriminator 1) net/packet/af_packet.c:3177 (discriminator 1)) [ 67.891700] ? _raw_spin_lock_bh (./arch/x86/include/asm/atomic.h:107 (discriminator 4) ./include/linux/atomic/atomic-arch-fallback.h:2170 (discriminator 4) ./include/linux/atomic/atomic-instrumented.h:1302 (discriminator 4) ./include/asm-generic/qspinlock.h:111 (discriminator 4) ./include/linux/spinlock.h:187 (discriminator 4) ./include/linux/spinlock_api_smp.h:127 (discriminator 4) kernel/locking/spinlock.c:178 (discriminator 4)) [ 67.891716] __sys_sendto (net/socket.c:730 (discriminator 1) net/socket.c:745 (discriminator 1) net/socket.c:2210 (discriminator 1)) [ 67.891734] ? do_sock_setsockopt (net/socket.c:2335) [ 67.891747] ? __sys_setsockopt (./include/linux/file.h:34 net/socket.c:2355) [ 67.891761] __x64_sys_sendto (net/socket.c:2222 (discriminator 1) net/socket.c:2218 (discriminator 1) net/socket.c:2218 (discriminator 1)) [ 67.891772] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) [ 67.891785] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fixes: 9181d6f8 ("net: add more sanity check in virtio_net_hdr_to_skb()") Signed-off-by:
-
Felix Fietkau authored
Detect tcp gso fraglist skbs with corrupted geometry (see below) and pass these to skb_segment instead of skb_segment_list, as the first can segment them correctly. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify these skbs, breaking these invariants. In extreme cases they pull all data into skb linear. For TCP, this causes a NULL ptr deref in __tcpv4_gso_segment_list_csum at tcp_hdr(seg->next). Detect invalid geometry due to pull, by checking head_skb size. Don't just drop, as this may blackhole a destination. Convert to be able to pass to regular skb_segment. Approach and description based on a patch by Willem de Bruijn. Link: https://lore.kernel.org/netdev/20240428142913.18666-1-shiming.cheng@mediatek.com/ Link: https://lore.kernel.org/netdev/20240922150450.3873767-1-willemdebruijn.kernel@gmail.com/ Fixes: bee88cd5 ("net: add support for segmenting TCP fraglist GSO packets") Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2024-09-25 * tag 'mlx5-fixes-2024-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix crash caused by calling __xfrm_state_delete() twice net/mlx5e: SHAMPO, Fix overflow of hd_per_wq net/mlx5: HWS, changed E2BIG error to a negative return code net/mlx5: HWS, fixed double-free in error flow of creating SQ net/mlx5: Fix wrong reserved field in hca_cap_2 in mlx5_ifc net/mlx5e: Fix NULL deref in mlx5e_tir_builder_alloc() net/mlx5: Added cond_resched() to crdump collection net/mlx5: Fix error path in multi-packet WQE transmit ==================== Link: https://patch.msgid.link/20240925202013.45374-1-saeed@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btmrvl: Use IRQF_NO_AUTOEN flag in request_irq() - MGMT: Fix possible crash on mgmt_index_removed - L2CAP: Fix uaf in l2cap_connect - Bluetooth: hci_event: Align BR/EDR JUST_WORKS paring with LE * tag 'for-net-2024-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_event: Align BR/EDR JUST_WORKS paring with LE Bluetooth: btmrvl: Use IRQF_NO_AUTOEN flag in request_irq() Bluetooth: L2CAP: Fix uaf in l2cap_connect Bluetooth: MGMT: Fix possible crash on mgmt_index_removed ==================== Link: https://patch.msgid.link/20240927145730.2452175-1-luiz.dentz@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'ieee802154-for-net-2024-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2024-09-27 Jinjie Ruan added the use of IRQF_NO_AUTOEN in the mcr20a driver and fixed and addiotinal build dependency problem while doing so. Jiawei Ye, ensured a correct RCU handling in mac802154_scan_worker. * tag 'ieee802154-for-net-2024-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan: net: ieee802154: mcr20a: Use IRQF_NO_AUTOEN flag in request_irq() mac802154: Fix potential RCU dereference issue in mac802154_scan_worker ieee802154: Fix build error ==================== Link: https://patch.msgid.link/20240927094351.3865511-1-stefan@datenfreihafen.orgSigned-off-by:
-
- 01 Oct, 2024 14 commits
-
-
Anton Danilov authored
Regression Description: Depending on the options specified for the GRE tunnel device, small packets may be dropped. This occurs because the pskb_network_may_pull function fails due to the packet's insufficient length. For example, if only the okey option is specified for the tunnel device, original (before encapsulation) packets smaller than 28 bytes (including the IPv4 header) will be dropped. This happens because the required length is calculated relative to the network header, not the skb->head. Here is how the required length is computed and checked: * The pull_len variable is set to 28 bytes, consisting of: * IPv4 header: 20 bytes * GRE header with Key field: 8 bytes * The pskb_network_may_pull function adds the network offset, shifting the checkable space further to the beginning of the network header and extending it to the beginning of the packet. As a result, the end of the checkable space occurs beyond the actual end of the packet. Instead of ensuring that 28 bytes are present in skb->head, the function is requesting these 28 bytes starting from the network header. For small packets, this requested length exceeds the actual packet size, causing the check to fail and the packets to be dropped. This issue affects both locally originated and forwarded packets in DMVPN-like setups. How to reproduce (for local originated packets): ip link add dev gre1 type gre ikey 1.9.8.4 okey 1.9.8.4 \ local <your-ip> remote 0.0.0.0 ip link set mtu 1400 dev gre1 ip link set up dev gre1 ip address add 192.168.13.1/24 dev gre1 ip neighbor add 192.168.13.2 lladdr <remote-ip> dev gre1 ping -s 1374 -c 10 192.168.13.2 tcpdump -vni gre1 tcpdump -vni <your-ext-iface> 'ip proto 47' ip -s -s -d link show dev gre1 Solution: Use the pskb_may_pull function instead the pskb_network_may_pull. Fixes: 80d875cf ("ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit()") Signed-off-by:Anton Danilov <littlesmilingcloud@gmail.com> Reviewed-by:
-
Shenwei Wang authored
Increase the timeout for checking the busy bit of the VLAN Tag register from 10µs to 500ms. This change is necessary to accommodate scenarios where Energy Efficient Ethernet (EEE) is enabled. Overnight testing revealed that when EEE is active, the busy bit can remain set for up to approximately 300ms. The new 500ms timeout provides a safety margin. Fixes: ed64639b ("net: stmmac: Add support for VLAN Rx filtering") Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Link: https://patch.msgid.link/20240924205424.573913-1-shenwei.wang@nxp.comSigned-off-by:
-
Paolo Abeni authored
Eric Dumazet says: ==================== net: two fixes for qdisc_pkt_len_init() Inspired by one syzbot report. At least one qdisc (fq_codel) depends on qdisc_skb_cb(skb)->pkt_len having a sane value (not zero) With the help of af_packet, syzbot was able to fool qdisc_pkt_len_init() to precisely set qdisc_skb_cb(skb)->pkt_len to zero. First patch fixes this issue. Second one (a separate one to help future bisections) adds more sanity check to SKB_GSO_DODGY users. ==================== Link: https://patch.msgid.link/20240924150257.1059524-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
One path takes care of SKB_GSO_DODGY, assuming skb->len is bigger than hdr_len. virtio_net_hdr_to_skb() does not fully dissect TCP headers, it only make sure it is at least 20 bytes. It is possible for an user to provide a malicious 'GSO' packet, total length of 80 bytes. - 20 bytes of IPv4 header - 60 bytes TCP header - a small gso_size like 8 virtio_net_hdr_to_skb() would declare this packet as a normal GSO packet, because it would see 40 bytes of payload, bigger than gso_size. We need to make detect this case to not underflow qdisc_skb_cb(skb)->pkt_len. Fixes: 1def9238 ("net_sched: more precise pkt_len computation") Signed-off-by:
-
Eric Dumazet authored
After commit 7c6d2ecb ("net: be more gentle about silly gso requests coming from user") virtio_net_hdr_to_skb() had sanity check to detect malicious attempts from user space to cook a bad GSO packet. Then commit cf9acc90 ("net: virtio_net_hdr_to_skb: count transport header in UFO") while fixing one issue, allowed user space to cook a GSO packet with the following characteristic : IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28. When this packet arrives in qdisc_pkt_len_init(), we end up with hdr_len = 28 (IPv4 header + UDP header), matching skb->len Then the following sets gso_segs to 0 : gso_segs = DIV_ROUND_UP(skb->len - hdr_len, shinfo->gso_size); Then later we set qdisc_skb_cb(skb)->pkt_len to back to zero :/ qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len; This leads to the following crash in fq_codel [1] qdisc_pkt_len_init() is best effort, we only want an estimation of the bytes sent on the wire, not crashing the kernel. This patch is fixing this particular issue, a following one adds more sanity checks for another potential bug. [1] [ 70.724101] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 70.724561] #PF: supervisor read access in kernel mode [ 70.724561] #PF: error_code(0x0000) - not-present page [ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD 107ee2067 PMD 0 [ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI [ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm: b358537762 Not tainted 6.11.0-virtme #991 [ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.724561] RIP: 0010:fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00 eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49 All code ======== 0: 24 08 and $0x8,%al 2: 49 c1 e1 06 shl $0x6,%r9 6: 44 89 7c 24 18 mov %r15d,0x18(%rsp) b: 45 31 ed xor %r13d,%r13d e: 45 31 c0 xor %r8d,%r8d 11: 31 ff xor %edi,%edi 13: 89 44 24 14 mov %eax,0x14(%rsp) 17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9 1e: eb 04 jmp 0x24 20: 39 ca cmp %ecx,%edx 22: 73 37 jae 0x5b 24: 4d 8b 39 mov (%r9),%r15 27: 83 c7 01 add $0x1,%edi 2a:* 49 8b 17 mov (%r15),%rdx <-- trapping instruction 2d: 49 89 11 mov %rdx,(%r9) 30: 41 8b 57 28 mov 0x28(%r15),%edx 34: 45 8b 5f 34 mov 0x34(%r15),%r11d 38: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 3f: 49 rex.WB Code starting with the faulting instruction =========================================== 0: 49 8b 17 mov (%r15),%rdx 3: 49 89 11 mov %rdx,(%r9) 6: 41 8b 57 28 mov 0x28(%r15),%edx a: 45 8b 5f 34 mov 0x34(%r15),%r11d e: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 15: 49 rex.WB [ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202 [ 70.724561] RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000 [ 70.724561] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 [ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09: ffff95b710a30000 [ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58 [ 70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000 [ 70.724561] FS: 000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000 [ 70.724561] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 70.724561] CR2: 0000000000000000 CR3: 000000010c568000 CR4: 00000000000006f0 [ 70.724561] Call Trace: [ 70.724561] <TASK> [ 70.724561] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 70.724561] ? page_fault_oops (arch/x86/mm/fault.c:715) [ 70.724561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539) [ 70.724561] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) [ 70.724561] ? fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] dev_qdisc_enqueue (net/core/dev.c:3784) [ 70.724561] __dev_queue_xmit (net/core/dev.c:3880 (discriminator 2) net/core/dev.c:4390 (discriminator 2)) [ 70.724561] ? irqentry_enter (kernel/entry/common.c:237) [ 70.724561] ? sysvec_apic_timer_interrupt (./arch/x86/include/asm/hardirq.h:74 (discriminator 2) arch/x86/kernel/apic/apic.c:1043 (discriminator 2) arch/x86/kernel/apic/apic.c:1043 (discriminator 2)) [ 70.724561] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:58 (discriminator 4)) [ 70.724561] ? asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:702) [ 70.724561] ? virtio_net_hdr_to_skb.constprop.0 (./include/linux/virtio_net.h:129 (discriminator 1)) [ 70.724561] packet_sendmsg (net/packet/af_packet.c:3145 (discriminator 1) net/packet/af_packet.c:3177 (discriminator 1)) [ 70.724561] ? _raw_spin_lock_bh (./arch/x86/include/asm/atomic.h:107 (discriminator 4) ./include/linux/atomic/atomic-arch-fallback.h:2170 (discriminator 4) ./include/linux/atomic/atomic-instrumented.h:1302 (discriminator 4) ./include/asm-generic/qspinlock.h:111 (discriminator 4) ./include/linux/spinlock.h:187 (discriminator 4) ./include/linux/spinlock_api_smp.h:127 (discriminator 4) kernel/locking/spinlock.c:178 (discriminator 4)) [ 70.724561] ? netdev_name_node_lookup_rcu (net/core/dev.c:325 (discriminator 1)) [ 70.724561] __sys_sendto (net/socket.c:730 (discriminator 1) net/socket.c:745 (discriminator 1) net/socket.c:2210 (discriminator 1)) [ 70.724561] ? __sys_setsockopt (./include/linux/file.h:34 net/socket.c:2355) [ 70.724561] __x64_sys_sendto (net/socket.c:2222 (discriminator 1) net/socket.c:2218 (discriminator 1) net/socket.c:2218 (discriminator 1)) [ 70.724561] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) [ 70.724561] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) [ 70.724561] RIP: 0033:0x41ae09 Fixes: cf9acc90 ("net: virtio_net_hdr_to_skb: count transport header in UFO") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Jonathan Davies <jonathan.davies@nutanix.com> Reviewed-by:
-
Roger Quadros authored
The number of register fields cannot be assumed to be ALE_FIELDS_MAX as some platforms can have lesser fields. Solve this by embedding the actual number of fields available in platform data and use that instead of ALE_FIELDS_MAX. Gets rid of the below warning on BeagleBone Black [ 1.007735] WARNING: CPU: 0 PID: 33 at drivers/base/regmap/regmap.c:1208 regmap_field_init+0x88/0x9c [ 1.007802] invalid empty mask defined [ 1.007812] Modules linked in: [ 1.007842] CPU: 0 UID: 0 PID: 33 Comm: kworker/u4:3 Not tainted 6.11.0-01459-g508403ab7b74-dirty #840 [ 1.007867] Hardware name: Generic AM33XX (Flattened Device Tree) [ 1.007890] Workqueue: events_unbound deferred_probe_work_func [ 1.007935] Call trace: [ 1.007957] unwind_backtrace from show_stack+0x10/0x14 [ 1.007999] show_stack from dump_stack_lvl+0x50/0x64 [ 1.008033] dump_stack_lvl from __warn+0x70/0x124 [ 1.008077] __warn from warn_slowpath_fmt+0x194/0x1a8 [ 1.008113] warn_slowpath_fmt from regmap_field_init+0x88/0x9c [ 1.008154] regmap_field_init from devm_regmap_field_alloc+0x48/0x64 [ 1.008193] devm_regmap_field_alloc from cpsw_ale_create+0xfc/0x320 [ 1.008251] cpsw_ale_create from cpsw_init_common+0x214/0x354 [ 1.008286] cpsw_init_common from cpsw_probe+0x4ac/0xb88 Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/netdev/CAMuHMdUf-tKRDzkz2_m8qdFTFutefddU0NTratVrEjRTzA3yQQ@mail.gmail.com/ Fixes: 11cbcfea ("net: ethernet: ti: cpsw_ale: use regfields for number of Entries and Policers") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240924-am65-cpsw-multi-rx-fix-v1-1-0ca3fa9a1398@kernel.orgSigned-off-by:
-
Geert Uytterhoeven authored
There is no need to ask the user about enabling Microchip FDMA functionality, as all drivers that use it select the FDMA symbol. Hence make the symbol invisible, unless when compile-testing. Fixes: 30e48a75 ("net: microchip: add FDMA library") Signed-off-by:
Daniel Machon <daniel.machon@microchip.com> Link: https://patch.msgid.link/8e2bcd8899c417a962b7ee3f75b29f35b25d7933.1727171879.git.geert+renesas@glider.beSigned-off-by:
-
Csókás, Bence authored
On link-state change, the controller gets reset, which clears all PTP registers, including PHC time, calibrated clock correction values etc. For correct IEEE 1588 operation we need to restore these after the reset. Fixes: 6605b730 ("FEC: Add time stamping code and a PTP hardware clock") Signed-off-by:
Csókás, Bence <csokas.bence@prolan.hu> Reviewed-by:
Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20240924093705.2897329-2-csokas.bence@prolan.huSigned-off-by:
-
Csókás, Bence authored
On link state change, the controller gets reset, causing PPS to drop out. Re-enable PPS if it was enabled before the controller reset. Fixes: 6605b730 ("FEC: Add time stamping code and a PTP hardware clock") Signed-off-by:
-
Jiawen Wu authored
The value is read from the register TXGBE_RX_GEN_CTL3, and it should be written back to TXGBE_RX_GEN_CTL3 when it changes some fields. Cc: stable@vger.kernel.org Fixes: f629acc6 ("net: pcs: xpcs: support to switch mode for Wangxun NICs") Signed-off-by:
Jiawen Wu <jiawenwu@trustnetic.com> Reported-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
-
Aleksander Jan Bajkowski authored
When applying padding, the buffer is not zeroed, which results in memory disclosure. The mentioned data is observed on the wire. This patch uses skb_put_padto() to pad Ethernet frames properly. The mentioned function zeroes the expanded buffer. In case the packet cannot be padded it is silently dropped. Statistics are also not incremented. This driver does not support statistics in the old 32-bit format or the new 64-bit format. These will be added in the future. In its current form, the patch should be easily backported to stable versions. Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets in hardware, so software padding must be applied. Fixes: 504d4721 ("MIPS: Lantiq: Add ethernet driver") Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240923214949.231511-2-olek2@wp.plSigned-off-by:
-
Daniel Borkmann authored
Commit 24ab059d ("net: check dev->gso_max_size in gso_features_check()") added a dev->gso_max_size test to gso_features_check() in order to fall back to GSO when needed. This was added as it was noticed that some drivers could misbehave if TSO packets get too big. However, the check doesn't respect dev->gso_ipv4_max_size limit. For instance, a device could be configured with BIG TCP for IPv4, but not IPv6. Therefore, add a netif_get_gso_max_size() equivalent to netif_get_gro_max_size() and use the helper to respect both limits before falling back to GSO engine. Fixes: 24ab059d ("net: check dev->gso_max_size in gso_features_check()") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by:
-
Daniel Borkmann authored
Add a small netif_get_gro_max_size() helper which returns the maximum IPv4 or IPv6 GRO size of the netdevice. We later add a netif_get_gso_max_size() equivalent as well for GSO, so that these helpers can be used consistently instead of open-coded checks. Signed-off-by:
-
Vladimir Oltean authored
Alexander Sverdlin presents 2 problems during shutdown with the lan9303 driver. One is specific to lan9303 and the other just happens to reproduce there. The first problem is that lan9303 is unique among DSA drivers in that it calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown, not remove): phy_state_machine() -> ... -> dsa_user_phy_read() -> ds->ops->phy_read() -> lan9303_phy_read() -> chip->ops->phy_read() -> lan9303_mdio_phy_read() -> dev_get_drvdata() But we never stop the phy_state_machine(), so it may continue to run after dsa_switch_shutdown(). Our common pattern in all DSA drivers is to set drvdata to NULL to suppress the remove() method that may come afterwards. But in this case it will result in an NPD. The second problem is that the way in which we set dp->conduit->dsa_ptr = NULL; is concurrent with receive packet processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL, but afterwards, rather than continuing to use that non-NULL value, dev->dsa_ptr is dereferenced again and again without NULL checks: dsa_conduit_find_user() and many other places. In between dereferences, there is no locking to ensure that what was valid once continues to be valid. Both problems have the common aspect that closing the conduit interface solves them. In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN event in dsa_user_netdevice_event() which closes user ports as well. dsa_port_disable_rt() calls phylink_stop(), which synchronously stops the phylink state machine, and ds->ops->phy_read() will thus no longer call into the driver after this point. In the second case, dev_close(conduit) should do this, as per Documentation/networking/driver.rst: | Quiescence | ---------- | | After the ndo_stop routine has been called, the hardware must | not receive or transmit any data. All in flight packets must | be aborted. If necessary, poll or wait for completion of | any reset commands. So it should be sufficient to ensure that later, when we zeroize conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call on this conduit. The addition of the netif_device_detach() function is to ensure that ioctls, rtnetlinks and ethtool requests on the user ports no longer propagate down to the driver - we're no longer prepared to handle them. The race condition actually did not exist when commit 0650bf52 ("net: dsa: be compatible with masters which unregister on shutdown") first introduced dsa_switch_shutdown(). It was created later, when we stopped unregistering the user interfaces from a bad spot, and we just replaced that sequence with a racy zeroization of conduit->dsa_ptr (one which doesn't ensure that the interfaces aren't up). Reported-by:Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20240913203549.3081071-1-vladimir.oltean@nxp.comSigned-off-by:
-
- 27 Sep, 2024 8 commits
-
-
Luiz Augusto von Dentz authored
This aligned BR/EDR JUST_WORKS method with LE which since 92516cd9 ("Bluetooth: Always request for user confirmation for Just Works") always request user confirmation with confirm_hint set since the likes of bluetoothd have dedicated policy around JUST_WORKS method (e.g. main.conf:JustWorksRepairing). CVE: CVE-2024-8805 Cc: stable@vger.kernel.org Fixes: ba15a58b ("Bluetooth: Fix SSP acceptor just-works confirmation without MITM") Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by:
Kiran K <kiran.k@intel.com>
-
Jinjie Ruan authored
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: bb7f4f0b ("btmrvl: add platform specific wakeup interrupt support") Signed-off-by:
Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
[Syzbot reported] BUG: KASAN: slab-use-after-free in l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949 Read of size 8 at addr ffff8880241e9800 by task kworker/u9:0/54 CPU: 0 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-00268-g788220ee #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Workqueue: hci2 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949 l2cap_connect_req net/bluetooth/l2cap_core.c:4080 [inline] l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:4772 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5543 [inline] l2cap_recv_frame+0xf0b/0x8eb0 net/bluetooth/l2cap_core.c:6825 l2cap_recv_acldata+0x9b4/0xb70 net/bluetooth/l2cap_core.c:7514 hci_acldata_packet net/bluetooth/hci_core.c:3791 [inline] hci_rx_work+0xaab/0x1610 net/bluetooth/hci_core.c:4028 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 ... Freed by task 5245: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579 poison_slab_object+0xf7/0x160 mm/kasan/common.c:240 __kasan_slab_free+0x32/0x50 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2256 [inline] slab_free mm/slub.c:4477 [inline] kfree+0x12a/0x3b0 mm/slub.c:4598 l2cap_conn_free net/bluetooth/l2cap_core.c:1810 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_conn_put net/bluetooth/l2cap_core.c:1822 [inline] l2cap_conn_del+0x59d/0x730 net/bluetooth/l2cap_core.c:1802 l2cap_connect_cfm+0x9e6/0xf80 net/bluetooth/l2cap_core.c:7241 hci_connect_cfm include/net/bluetooth/hci_core.h:1960 [inline] hci_conn_failed+0x1c3/0x370 net/bluetooth/hci_conn.c:1265 hci_abort_conn_sync+0x75a/0xb50 net/bluetooth/hci_sync.c:5583 abort_conn_sync+0x197/0x360 net/bluetooth/hci_conn.c:2917 hci_cmd_sync_work+0x1a4/0x410 net/bluetooth/hci_sync.c:328 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Reported-by: syzbot+c12e2f941af1feb5632c@syzkaller.appspotmail.com Tested-by: syzbot+c12e2f941af1feb5632c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c12e2f941af1feb5632c Fixes: 7b064eda ("Bluetooth: Fix authentication if acl data comes before remote feature evt") Signed-off-by:
-
Luiz Augusto von Dentz authored
If mgmt_index_removed is called while there are commands queued on cmd_sync it could lead to crashes like the bellow trace: 0x0000053D: __list_del_entry_valid_or_report+0x98/0xdc 0x0000053D: mgmt_pending_remove+0x18/0x58 [bluetooth] 0x0000053E: mgmt_remove_adv_monitor_complete+0x80/0x108 [bluetooth] 0x0000053E: hci_cmd_sync_work+0xbc/0x164 [bluetooth] So while handling mgmt_index_removed this attempts to dequeue commands passed as user_data to cmd_sync. Fixes: 7cf5c297 ("Bluetooth: hci_sync: Refactor remove Adv Monitor") Reported-by:
jiaymao <quic_jiaymao@quicinc.com> Signed-off-by:
-
zhang jiao authored
There is no return value in count_entries, just add it. Fixes: eff3c558 ("netfilter: ctnetlink: support filtering by zone") Signed-off-by:
zhang jiao <zhangjiao2@cmss.chinamobile.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Eric Dumazet authored
syzbot found that nf_dup_ipv4() or nf_dup_ipv6() could write per-cpu variable nf_skb_duplicated in an unsafe way [1]. Disabling preemption as hinted by the splat is not enough, we have to disable soft interrupts as well. [1] BUG: using __this_cpu_write() in preemptible [00000000] code: syz.4.282/6316 caller is nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87 CPU: 0 UID: 0 PID: 6316 Comm: syz.4.282 Not tainted 6.11.0-rc7-syzkaller-00104-g7052622f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_preemption_disabled+0x10e/0x120 lib/smp_processor_id.c:49 nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87 nft_dup_ipv4_eval+0x1db/0x300 net/ipv4/netfilter/nft_dup_ipv4.c:30 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288 nft_do_chain_ipv4+0x202/0x320 net/netfilter/nft_chain_filter.c:23 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook+0x2c4/0x450 include/linux/netfilter.h:269 NF_HOOK_COND include/linux/netfilter.h:302 [inline] ip_output+0x185/0x230 net/ipv4/ip_output.c:433 ip_local_out net/ipv4/ip_output.c:129 [inline] ip_send_skb+0x74/0x100 net/ipv4/ip_output.c:1495 udp_send_skb+0xacf/0x1650 net/ipv4/udp.c:981 udp_sendmsg+0x1c21/0x2a60 net/ipv4/udp.c:1269 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f4ce4f7def9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f4ce5d4a038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f4ce5135f80 RCX: 00007f4ce4f7def9 RDX: 0000000000000001 RSI: 0000000020005d40 RDI: 0000000000000006 RBP: 00007f4ce4ff0b76 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f4ce5135f80 R15: 00007ffd4cbc6d68 </TASK> Fixes: d877f071 ("netfilter: nf_tables: add nft_dup expression") Reported-by:
-
Phil Sutter authored
As a side-effect of nftables' commit dbff26bfba833 ("cache: consolidate reset command"), audit logs changed when more objects were reset than fit into a single netlink message. Since the objects' distribution in netlink messages is not relevant, implement a summarizing function which combines repeated audit logs into a single one with summed up 'entries=' value. Fixes: 203bb9d3 ("selftests: netfilter: Extend nft_audit.sh") Signed-off-by:Phil Sutter <phil@nwl.cc> Signed-off-by:
-
Jinjie Ruan authored
It's important to undo pm_runtime_use_autosuspend() with pm_runtime_dont_use_autosuspend() at driver exit time. But the pm_runtime_disable() and pm_runtime_dont_use_autosuspend() is missing in the error path for bam_dmux_probe(). So add it. Found by code review. Compile-tested only. Fixes: 21a0ffd9 ("net: wwan: Add Qualcomm BAM-DMUX WWAN network driver") Suggested-by:
Stephan Gerhold <stephan.gerhold@linaro.org> Signed-off-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
