- 30 Sep, 2021 40 commits
-
-
Ricardo Ribalda authored
The uvc driver relies on the camera firmware to keep the control states and therefore is not capable of changing an inactive control. Allow returning -EACCES in those cases. Signed-off-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Ricardo Ribalda authored
If we have an error setting a control, return the affected control in the error_idx field. Reviewed-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Ricardo Ribalda authored
We can figure out if reading/writing a set of controls can fail without accessing them by checking their flags. This way we can honor the API closer: If an error is found when validating the list of controls passed with VIDIOC_G_EXT_CTRLS, then error_idx shall be set to ctrls->count to indicate to userspace that no actual hardware was touched. Fixes v4l2-compliance: Control ioctls (Input 0): warn: v4l2-test-controls.cpp(765): g_ext_ctrls(0) invalid error_idx 0 fail: v4l2-test-controls.cpp(645): invalid error index write only control test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL Reviewed-by: -
Ricardo Ribalda authored
The framework already contains a map of IDs to names, lets use it when possible. Reviewed-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Ricardo Ribalda authored
Hans has discovered that in his test device, for the H264 format bytesused goes up to about 570, for YUYV it will actually go up to a bit over 5000 bytes, and for MJPG up to about 2706 bytes. We should also, according to V4L2_META_FMT_UVC docs, drop headers when the buffer is full. Credit-to: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by:
-
Ricardo Ribalda authored
All the entities must have a unique name. We can have a descriptive and unique name by appending the function and the entity->id. This is even resilent to multi chain devices. Fixes v4l2-compliance: Media Controller ioctls: fail: v4l2-test-media.cpp(205): v2_entity_names_set.find(key) != v2_entity_names_set.end() test MEDIA_IOC_G_TOPOLOGY: FAIL fail: v4l2-test-media.cpp(394): num_data_links != num_links test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL Signed-off-by: -
Ricardo Ribalda authored
Use the device name for the card name instead of vdev->name. That way all the devices have a different name instead of the common vdev->name. Signed-off-by:
-
Ricardo Ribalda authored
Create all the class controls for the device defined controls. Fixes v4l2-compliance: Control ioctls (Input 0): fail: v4l2-test-controls.cpp(216): missing control class for class 00980000 fail: v4l2-test-controls.cpp(216): missing control tclass for class 009a0000 test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: FAIL Reviewed-by:
-
Ricardo Ribalda authored
Pass the chain instead of the device. We want to keep the reference to the chain that controls belong to. We need to delay the initialization of the controls after the chains have been initialized. This is a cleanup needed for the next patches. Reviewed-by:
-
Ricardo Ribalda authored
The device is doing something unexpected with the control. Either because the protocol is not properly implemented or there has been a HW error. Fixes v4l2-compliance: Control ioctls (Input 0): fail: v4l2-test-controls.cpp(448): s_ctrl returned an error (22) test VIDIOC_G/S_CTRL: FAIL fail: v4l2-test-controls.cpp(698): s_ext_ctrls returned an error (22) test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL Reviewed-by: -
Ricardo Ribalda authored
Fixes v4l2-compliance: Format ioctls (Input 0): warn: v4l2-test-formats.cpp(1339): S_PARM is supported but doesn't report V4L2_CAP_TIMEPERFRAME fail: v4l2-test-formats.cpp(1241): node->has_frmintervals && !cap->capability Reviewed-by: -
Ricardo Ribalda authored
If we do not implement these callbacks the framework will call the ext_ctrl callbaks instead, which are a superset of this functions. Suggested-by:
-
Ricardo Ribalda authored
If the driver does not implement s_ctrl, but it does implement s_ext_ctrls, we convert the call. When that happens we have also to convert back the response from s_ext_ctrls. Fixes v4l2_compliance: Control ioctls (Input 0): fail: v4l2-test-controls.cpp(411): returned control value out of range fail: v4l2-test-controls.cpp(507): invalid control 00980900 test VIDIOC_G/S_CTRL: FAIL Fixes: 35ea11ff ("V4L/DVB (8430): videodev: move some functions from v4l2-dev.h to v4l2-common.h or v4l2-ioctl.h") Reviewed-by:
-
Ricardo Ribalda authored
The framework already checks for us if V4L2_CTRL_WHICH_DEF_VAL is written. Reviewed-by:
-
Ricardo Ribalda authored
The framework already checks for us if V4L2_CTRL_WHICH_DEF_VAL is written. Cc: Mike Isely <isely@pobox.com> Signed-off-by:
-
Ricardo Ribalda authored
Drivers that do not use the ctrl-framework use this function instead. Fix the following issues: - Do not check for multiple classes when getting the DEF_VAL. - Return -EINVAL for request_api calls - Default value cannot be changed, return EINVAL as soon as possible. - Return the right error_idx [If an error is found when validating the list of controls passed with VIDIOC_G_EXT_CTRLS, then error_idx shall be set to ctrls->count to indicate to userspace that no actual hardware was touched. It would have been much nicer of course if error_idx could point to the control index that failed the validation, but sadly that's not how the API was designed.] Fixes v4l2-compliance: Control ioctls (Input 0): warn: v4l2-test-controls.cpp(834): error_idx should be equal to count warn: v4l2-test-controls.cpp(855): error_idx should be equal to count fail: v4l2-test-controls.cpp(813): doioctl(node, VIDIOC_G_EXT_CTRLS, &ctrls) test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL Buffer ioctls (Input 0): fail: v4l2-test-buffers.cpp(1994): ret != EINVAL && ret != EBADR && ret != ENOTTY test Requests: FAIL Cc: stable@vger.kernel.org Fixes: 6fa6f831 ("media: v4l2-ctrls: add core request support") Suggested-by: -
Cai Huoqing authored
Remove including <linux/version.h> that don't need it. V1->V2: Split the patch in two. Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Bingbu Cao authored
Currently, Imgu can not support output the auto-exposure statistics into ae_raw_buffer in 3A stats buffer, this patch document it. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
David Plowman authored
Add documentation for the V4L2_CID_NOTIFY_GAINS control. This control is required by sensors that need to know what colour gains will be applied to pixels by downstream processing (such as by an ISP), though the sensor does not apply these gains itself. Signed-off-by:
David Plowman <david.plowman@raspberrypi.com> Reviewed-by:
-
David Plowman authored
We add a new control V4L2_CID_NOTIFY_GAINS which allows the sensor to be notified what gains will be applied to the different colour channels by subsequent processing (such as by an ISP), even though the sensor will not apply any of these gains itself. For Bayer sensors this will be an array control taking 4 values which are the 4 gains arranged in the fixed order B, Gb, Gr and R, irrespective of the exact Bayer order of the sensor itself. The use of an array makes it straightforward to extend this control to non-Bayer sensors (for example, sensors with an RGBW pattern) in future. The units are in all cases linear with the default value indicating a gain of exactly 1.0. For example, if the default value were reported as 128 then the value 192 would represent a gain of exactly 1.5. Signed-off-by:
-
Hsin-Yi Wang authored
Setting the value of V_WIN_OFF (0x3818) from 0x02 to 0x01 to use GRBG format still results in wrong color output if data is tuned in BGGR mode before. Set default mbus format for the supported modes, but allow the caller of set(get)_fmt to change the bayer format between BGGR and GRBG. Set the default mbus format for 3264x2448 (and 1632x1224) to BGGR as the data sheet states the value of this reg should be 0x02 by default. If new modes are added in the future, they can add the mipi_data_mbus_{format} settings into bayer_offset_configs to adjust their offset regs. Fixes: 2984b0dd ("media: ov8856: Configure sensor for GRBG Bayer for all modes") Signed-off-by:Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
Arec Kao authored
This driver supports following features: - phase detection auto focus (PDAF) - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - 4208x3120 at 30FPS - 2080x1170 at 60FPS Signed-off-by:
Arec Kao <arec.kao@intel.com> Signed-off-by:
-
Sakari Ailus authored
Obtain the clock frequency by reading the clock-frequency property if there's no clock. Fixes: 9fda2533 ("media: i2c: imx258: get clock from device properties and enable it via runtime PM") Signed-off-by:
-
Andy Shevchenko authored
Provide to_cio2_device() helper macro and convert users to make code easier to read. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
Provide to_cio2_buffer() helper macro and convert users to make code easier to read. Signed-off-by:
-
Andy Shevchenko authored
Provide to_sensor_asd() helper macro and convert users to make code easier to read. Signed-off-by:
-
Andy Shevchenko authored
V4L2 provides a few helper macros, in particular media_entity_to_video_device(). Switch the driver to use it instead of open-coded variant. Signed-off-by:
-
Andy Shevchenko authored
Use temporary storage for struct device pointer to simplify the code. Signed-off-by:
-
Andy Shevchenko authored
Use for_each_set_bit() instead of open-coding it to simplify the code. Signed-off-by:
-
Gustavo A. R. Silva authored
There is a wrong comparison of the total size of the loaded firmware css->fw->size with the size of a pointer to struct imgu_fw_header. Turn binary_header into a flexible-array member[1][2], use the struct_size() helper and fix the wrong size comparison. Notice that the loaded firmware needs to contain at least one 'struct imgu_fw_info' item in the binary_header[] array. It's also worth mentioning that "css->fw->size < struct_size(css->fwp, binary_header, 1)" with binary_header declared as a flexible-array member is equivalent to "css->fw->size < sizeof(struct imgu_fw_header)" with binary_header declared as a one-element array (as in the original code). The replacement of the one-element array with a flexible-array member also helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Fixes: 09d290f0 ("media: staging/intel-ipu3: css: Add support for firmware management") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Nícolas F. R. A. Prado authored
Use the header-rows option of the flat-table directive in order to have the first row displayed as a header. Also capitalize these headers. These changes make the tables easier to read. Signed-off-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by:
-
Dmitriy Ulitin authored
At the moment of enabling irq handling: 1922 ret = devm_request_threaded_irq(&pdev->dev, irq, dcmi_irq_callback, 1923 dcmi_irq_thread, IRQF_ONESHOT, 1924 dev_name(&pdev->dev), dcmi); there is still uninitialized field sd_format of struct stm32_dcmi *dcmi. If an interrupt occurs in the interval between the installation of the interrupt handler and the initialization of this field, NULL pointer dereference happens. This field is dereferenced in the handler function without any check: 457 if (dcmi->sd_format->fourcc == V4L2_PIX_FMT_JPEG && 458 dcmi->misr & IT_FRAME) { The patch moves interrupt handler installation after initialization of the sd_format field that happens in dcmi_graph_notify_complete() via dcmi_set_default_fmt(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:Dmitriy Ulitin <ulitin@ispras.ru> Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Shaokun Zhang authored
Function 'ov7660_init' is declared twice, remove the repeated declaration. Cc: Erik Andren <erik.andren@gmail.com> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by:
-
Geert Uytterhoeven authored
Convert the Renesas R-Car Image Renderer Device Tree binding documentation to json-schema. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Yizhuo authored
Inside function gc2235_detect(), variable "low" could be uninitialized if ov5693_read_reg() returns error, however, it affects the value of variable "id". The "id" is used in the later if statement, which is potentially unsafe. Link: https://lore.kernel.org/linux-media/20210711202334.27959-1-yzhai003@ucr.eduSigned-off-by:
Yizhuo <yzhai003@ucr.edu> Signed-off-by:
-
Evgeny Novikov authored
There were several issues with handling errors in lm3554_probe(): - Probe did not set the error code when v4l2_ctrl_handler_init() failed. - It intermixed gotos for handling errors of v4l2_ctrl_handler_init() and media_entity_pads_init(). - It did not set the error code for failures of v4l2_ctrl_new_custom(). - Probe did not free resources in case of failures of atomisp_register_i2c_module(). The patch fixes all these issues. Found by Linux Driver Verification project (linuxtesting.org). Link: https://lore.kernel.org/linux-media/20210810162943.19852-1-novikov@ispras.ruSigned-off-by:
Evgeny Novikov <novikov@ispras.ru> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Arnd Bergmann authored
The input_system_configure_channel_sensor() function lost its final return code in a previous patch: drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c: In function 'input_system_configure_channel_sensor': drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:1649:1: error: control reaches end of non-void function [-Werror=return-type] Restore what was there originally. Link: https://lore.kernel.org/linux-media/20210802143820.1150099-1-arnd@kernel.org Fixes: 728a5c64 ("media: atomisp: remove dublicate code") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Zheyu Ma authored
The interrupt handling should be related to the firmware version. If the driver matches an old firmware, then the driver should not handle interrupt such as i2c or dma, otherwise it will cause some errors. This log reveals it: [ 27.708641] INFO: trying to register non-static key. [ 27.710851] The code is fine but needs lockdep annotation, or maybe [ 27.712010] you didn't initialize this object before use? [ 27.712396] turning off the locking correctness validator. [ 27.712787] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169 [ 27.713349] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 27.714149] Call Trace: [ 27.714329] <IRQ> [ 27.714480] dump_stack+0xba/0xf5 [ 27.714737] register_lock_class+0x873/0x8f0 [ 27.715052] ? __lock_acquire+0x323/0x1930 [ 27.715353] __lock_acquire+0x75/0x1930 [ 27.715636] lock_acquire+0x1dd/0x3e0 [ 27.715905] ? netup_i2c_interrupt+0x19/0x310 [ 27.716226] _raw_spin_lock_irqsave+0x4b/0x60 [ 27.716544] ? netup_i2c_interrupt+0x19/0x310 [ 27.716863] netup_i2c_interrupt+0x19/0x310 [ 27.717178] netup_unidvb_isr+0xd3/0x160 [ 27.717467] __handle_irq_event_percpu+0x53/0x3e0 [ 27.717808] handle_irq_event_percpu+0x35/0x90 [ 27.718129] handle_irq_event+0x39/0x60 [ 27.718409] handle_fasteoi_irq+0xc2/0x1d0 [ 27.718707] __common_interrupt+0x7f/0x150 [ 27.719008] common_interrupt+0xb4/0xd0 [ 27.719289] </IRQ> [ 27.719446] asm_common_interrupt+0x1e/0x40 [ 27.719747] RIP: 0010:native_safe_halt+0x17/0x20 [ 27.720084] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6 [ 27.721386] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 27.721758] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 27.722262] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6 [ 27.722770] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 27.723277] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408 [ 27.723781] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000 [ 27.724289] default_idle+0x9/0x10 [ 27.724537] arch_cpu_idle+0xa/0x10 [ 27.724791] default_idle_call+0x6e/0x250 [ 27.725082] do_idle+0x1f0/0x2d0 [ 27.725326] cpu_startup_entry+0x18/0x20 [ 27.725613] start_secondary+0x11f/0x160 [ 27.725902] secondary_startup_64_no_verify+0xb0/0xbb [ 27.726272] BUG: kernel NULL pointer dereference, address: 0000000000000002 [ 27.726768] #PF: supervisor read access in kernel mode [ 27.727138] #PF: error_code(0x0000) - not-present page [ 27.727507] PGD 8000000118688067 P4D 8000000118688067 PUD 10feab067 PMD 0 [ 27.727999] Oops: 0000 [#1] PREEMPT SMP PTI [ 27.728302] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169 [ 27.728861] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 27.729660] RIP: 0010:netup_i2c_interrupt+0x23/0x310 [ 27.730019] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02 [ 27.731339] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046 [ 27.731716] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000 [ 27.732223] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8 [ 27.732727] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001 [ 27.733239] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000 [ 27.733745] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400 [ 27.734251] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 27.734821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.735228] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0 [ 27.735735] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.736241] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.736744] Call Trace: [ 27.736924] <IRQ> [ 27.737074] netup_unidvb_isr+0xd3/0x160 [ 27.737363] __handle_irq_event_percpu+0x53/0x3e0 [ 27.737706] handle_irq_event_percpu+0x35/0x90 [ 27.738028] handle_irq_event+0x39/0x60 [ 27.738306] handle_fasteoi_irq+0xc2/0x1d0 [ 27.738602] __common_interrupt+0x7f/0x150 [ 27.738899] common_interrupt+0xb4/0xd0 [ 27.739176] </IRQ> [ 27.739331] asm_common_interrupt+0x1e/0x40 [ 27.739633] RIP: 0010:native_safe_halt+0x17/0x20 [ 27.739967] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6 [ 27.741275] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 27.741647] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 27.742148] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6 [ 27.742652] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 27.743154] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408 [ 27.743652] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000 [ 27.744157] default_idle+0x9/0x10 [ 27.744405] arch_cpu_idle+0xa/0x10 [ 27.744658] default_idle_call+0x6e/0x250 [ 27.744948] do_idle+0x1f0/0x2d0 [ 27.745190] cpu_startup_entry+0x18/0x20 [ 27.745475] start_secondary+0x11f/0x160 [ 27.745761] secondary_startup_64_no_verify+0xb0/0xbb [ 27.746123] Modules linked in: [ 27.746348] Dumping ftrace buffer: [ 27.746596] (ftrace buffer empty) [ 27.746852] CR2: 0000000000000002 [ 27.747094] ---[ end trace ebafd46f83ab946d ]--- [ 27.747424] RIP: 0010:netup_i2c_interrupt+0x23/0x310 [ 27.747778] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02 [ 27.749082] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046 [ 27.749461] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000 [ 27.749966] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8 [ 27.750471] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001 [ 27.750976] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000 [ 27.751480] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400 [ 27.751986] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 27.752560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.752970] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0 [ 27.753481] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.753984] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.754487] Kernel panic - not syncing: Fatal exception in interrupt [ 27.755033] Dumping ftrace buffer: [ 27.755279] (ftrace buffer empty) [ 27.755534] Kernel Offset: disabled [ 27.755785] Rebooting in 1 seconds.. Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Linus Walleij authored
This driver is just using <gpio/driver.h> so include that and not the legacy <linux/gpio.h> header. Cc: Antti Palosaari <crope@iki.fi> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Muhammad Usama Anjum authored
mutex lock can be initialized with DEFINE_MUTEX() rather than explicitly calling mutex_init(). Signed-off-by:
Muhammad Usama Anjum <musamaanjum@gmail.com> Signed-off-by:
-
