- 15 May, 2014 8 commits
-
-
Phoebe Buckheister authored
The current WPAN header creation code checks for EMSGSIZE conditions, but does not account for the MIC field that link layer security may add at the end of the frame. Now that we can accurately calculate the maximum payload size of packets, use that to check for EMSGSIZE conditions. Signed-off-by:
Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Phoebe Buckheister authored
When dealing with 802.15.4, one often has to know the maximum payload size for a given packet. This depends on many factors, one of which is whether or not a security header is present in the frame. These definitions and functions provide an easy way for any upper layer to calculate the maximum payload size for a packet. The first obvious user for this is 6lowpan, which duplicates this calculation and gets it partially wrong because it ignores security headers. Signed-off-by:
-
Markus Lottmann authored
This unifies the behaviour with other network device drivers and allows for a matching of the PCI device path in UDEV rules. Signed-off-by:
Markus Lottmann <markus.lottmann1986@gmail.com> Signed-off-by:
-
David S. Miller authored
> include/net/ip.h:211:5: warning: "CONFIG_SYSCTL" is not defined [-Wundef] > #if CONFIG_SYSCTL > ^ Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
David S. Miller authored
George Cherian says: ==================== TI CPSW Cleanup This series does some minimal cleanups. -Conversion of pr_*() to dev_*() -Convert kzalloc to devm_kzalloc. ==================== Signed-off-by: -
George Cherian authored
Convert kzalloc() to devm_kzalloc(). Signed-off-by:
George Cherian <george.cherian@ti.com> Reviewed-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
George Cherian authored
Convert the lone pr_err() to dev_err() call. Signed-off-by:
-
George Cherian authored
Convert all pr_*() calls to dev_*() calls. No functional changes. Signed-off-by:
-
- 14 May, 2014 27 commits
-
-
Darek Marcinkiewicz authored
Sparse was reporting quite a few warnings for the driver. Those get fixed by this patch. Signed-off-by:
Dariusz Marcinkiewicz <reksio@newterm.pl> Signed-off-by:
-
Joe Perches authored
Missing a colon on definition use is a bit odd so change the macro for the 32 bit case to declare an __attribute__((unused)) and __deprecated variable. The __deprecated attribute will cause gcc to emit an error if the variable is actually used. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Jingoo Han authored
Use devm_ioremap_resource() because devm_request_and_ioremap() is obsoleted by devm_ioremap_resource(). Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ==================== Mellanox driver update 2014-05-12 This patchset introduce some small bug fixes: Eyal fixed some compilation and syntactic checkers warnings. Ido fixed a coruption in user priority mapping when changing number of channels. Shani fixed some other problems when modifying MAC address. Yuval fixed a problem when changing IRQ affinity during high traffic - IRQ changes got effective only after the first pause in traffic. This patchset was tested and applied over commit 93dccc59: "mdio_bus: fix devm_mdiobus_alloc_size export" Changes from V1: - applied feedback from Dave to use true/false and not 0/1 in patch 1/9 - removed the patch from Noa which adddressed a bug in flow steering table when using a bond device, as the fix might need to be in the bonding driver, this is now dicussed in the netdev thread "bonding directly changes underlying device address" Changes from V0: - Patch 1/9 - net/mlx4_core: Enforce irq affinity changes immediatly - Moved the new members to a hot cache line as Eric suggested ==================== Signed-off-by:
-
Eyal Perry authored
Adopt the "info: why not propagate 'ret' from parse_trans_rule()..." suggestion made by the smatch semantic checker on: drivers/net/ethernet/mellanox/mlx4/mcg.c:867 mlx4_flow_attach() Signed-off-by:
Eyal Perry <eyalpe@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
Eyal Perry authored
Using a positive value for error: MLX4_NET_TRANS_RULE_NUM instead of -EPROTONOSUPPORT, to remove compilation warning. Signed-off-by:
-
Shani Michaelli authored
This Patches solves an issue that could raise when modifying the device's MAC. It occurs due to a simultaneous access to priv->mac_hash from two contexts. The buggy scenario described below: Context 1: copy the new mac address to the dev->dev_addr field. Context 2: mlx4_en_do_uc_filter removes prev_mac entry from the mac_hash db since it is not in dev->uc and not equal to dev->dev_addr. Context 1: mlx4_en_do_set_mac() calls mlx4_en_replace_mac() to replace prev_mac with dev_addr but it fails to update the mac_hash db since it no longer contains prev_mac, therefore it returns with an error. The fix is to prevent mlx4_en_do_uc_filter from being executed by both of the context 1 calls described above, This is done by putting them both under the mdev->state_lock lock, it will solve this issue since mlx4_en_do_uc_filter is already protected by the mdev->state_lock. Reviewed-by:Shani Michaeli <shanim@mellanox.com> Signed-off-by:
-
Eyal Perry authored
Fix the "warn: suspicious bitop condition" made by the smatch semantic checker on: drivers/net/ethernet/mellanox/mlx4/main.c:509 mlx4_slave_cap() Signed-off-by:
-
Eyal Perry authored
Fix the "error: we previously assumed 'out_param' could be null" found by smatch semantic checker on: drivers/net/ethernet/mellanox/mlx4/cmd.c:506 mlx4_cmd_poll() drivers/net/ethernet/mellanox/mlx4/cmd.c:578 mlx4_cmd_wait() Signed-off-by:
-
Shani Michaelli authored
This patch fix an issue that happen when changing the MAC address when the port is down, described as follows: 1. Set the port down. 2. Change the MAC address - mlx4_en_set_mac() will change dev->dev_addr. 3. Set the port up - will result in mlx4_en_do_uc_filter that will remove the prev_mac entry from the mac_hash db. 4. Changing the MAC address again will eventually trigger the call to mlx4_en_replace_mac() in order to replace prev_mac with dev_addr but the prev_mac entry is already not exist in the mac_hash db therefore the operation fails. The fix is to set the prev_mac with the new MAC address so in step 3 above, after setting the port up mlx4_en_get_qp() is updating the mac_hash with the entry of dev_addr which is equal to prev_mac. Therefore in step 4, when calling mlx4_en_replace_mac, the entry related to prev_mac exist in mac_hash and the replace operation succeed. Reviewed-by:
-
Ido Shamay authored
When using ethtool set_channels, mlx4_en_setup_tc is always called, even when it was not configured. Fixed code to call mlx4_en_setup_tc() only if needed. Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
-
Yuval Atias authored
During heavy traffic, napi is constatntly polling the complition queue and no interrupt is fired. Because of that, changes to irq affinity are ignored until traffic is stopped and resumed. By registering to the irq notifier mechanism, and forcing interrupt when affinity is changed, irq affinity changes will be immediatly enforced. Signed-off-by:
Yuval Atias <yuvala@mellanox.com> Signed-off-by:
-
dingtianhong authored
When the physical MTU changes we should ensure that all existing MACVLAN dev MTU do not exceed the new lowerdev MTU. This patch adds that propagation. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Reviewed-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
wangweidong authored
In Documentation/networking/dccp.txt points that request_retries should be greater than 0. So make the extra1 to be &one instead of &zero. Signed-off-by:
Wang Weidong <wangweidong1@huawei.com> Signed-off-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
WANG Cong authored
Fengguang reported the following sparse warning: >> net/ipv6/proc.c:198:41: sparse: incorrect type in argument 1 (different address spaces) net/ipv6/proc.c:198:41: expected void [noderef] <asn:3>*mib net/ipv6/proc.c:198:41: got void [noderef] <asn:3>**pcpumib Fixes: commit 698365fa (net: clean up snmp stats code) Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
WANG Cong authored
ip_local_port_range is already per netns, so should ip_local_reserved_ports be. And since it is none by default we don't actually need it when we don't enable CONFIG_SYSCTL. By the way, rename inet_is_reserved_local_port() to inet_is_local_reserved_port() Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Laurent Pinchart authored
This helps increasing build testing coverage. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
David S. Miller authored
Jon Maloy says: ==================== tipc: bug fixes and improvements Intensive and extensive testing has revealed some rather infrequent problems related to flow control, buffer handling and link establishment. Commits ##1 to 4 deal with these problems. The remaining four commits are just code improvments, aiming at making the code more comprehensible and maintainable. There are no functional enhancements in this series. v2: Fixed a typo in commit log #2. Otherwise no changes from v1. ==================== Signed-off-by: -
Jon Paul Maloy authored
In order to reduce complexity and save a call level during message reception at port/socket level, we remove the function tipc_port_rcv() and merge its functionality into tipc_sk_rcv(). Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Reviewed-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Jon Paul Maloy authored
The function tipc_disc_rcv(), which is handling received neighbor discovery messages, is perceived as messy, and it is hard to verify its correctness by code inspection. The fact that the task it is set to resolve is fairly complex does not make the situation better. In this commit we try to take a more systematic approach to the problem. We define a decision machine which takes three state flags as input, and produces three action flags as output. We then walk through all permutations of the state flags, and for each of them we describe verbally what is going on, plus that we set zero or more of the action flags. The action flags indicate what should be done once the decision machine has finished its job, while the last part of the function deals with performing those actions. Signed-off-by:
-
Jon Paul Maloy authored
TIPC currently handles two media specific addresses: Ethernet MAC addresses and InfiniBand addresses. Those are kept in three different formats: 1) A "raw" format as obtained from the device. This format is known only by the media specific adapter code in eth_media.c and ib_media.c. 2) A "generic" internal format, in the form of struct tipc_media_addr, which can be referenced and passed around by the generic media- unaware code. 3) A serialized version of the latter, to be conveyed in neighbor discovery messages. Conversion between the three formats can only be done by the media specific code, so we have function pointers for this purpose in struct tipc_media. Here, the media adapters can install their own conversion functions at startup. We now introduce a new such function, 'raw2addr()', whose purpose is to convert from format 1 to format 2 above. We also try to as far as possible uniform commenting, variable names and usage of these functions, with the purpose of making them more comprehensible. We can now also remove the function tipc_l2_media_addr_set(), whose job is done better by the new function. Finally, we expand the field for serialized addresses (format 3) in discovery messages from 20 to 32 bytes. This is permitted according to the spec, and reduces the risk of problems when we add new media in the future. Signed-off-by:
-
Jon Paul Maloy authored
The function tipc_link_frag_rcv() is in reality a re-entrant generic message reassemby function that has nothing in particular to do with the link, where it is defined now. This becomes obvious when we see the need to call the function from other places in the code. In this commit rename it to tipc_buf_append() and move it to the file msg.c. We also simplify its signature by moving the tail pointer to the control block of the head buffer, hence making the head buffer self-contained. Signed-off-by:
-
Jon Paul Maloy authored
The message reassembly function does not update the 'len' and 'data_len' fields of the head skbuff correctly when fragments are chained to it. This may sometimes lead to obsure errors, such as fragment reordering when we receive fragments which are cloned buffers. This commit fixes this, by ensuring that the two fields are updated correctly. Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Jon Paul Maloy authored
In the current code, all incoming LINK_PROTOCOL messages, irrespective of type, nudge the "last message received" checkpoint, informing the link state machine that a message was received from the peer since last supervision timeout event. This inhibits the link from starting probing the peer unnecessarily. However, not only STATE messages are recorded as legitimate incoming traffic this way, but even RESET and ACTIVATE messages, which in reality are there to inform the link that the peer endpoint has been reset. At the same time, some RESET messages may be dropped instead of causing a link reset. This happens when the link endpoint thinks it is fully up and working, and the session number of the RESET is lower than or equal to the current link session. In such cases the RESET is perceived as a delayed remnant from an earlier session, or the current one, and dropped. Now, if a TIPC module is removed and then immediately reinserted, e.g. when using a script, RESET messages may arrive at the peer link endpoint before this one has had time to discover the failure. The RESET may be dropped because of the session number, but only after it has been recorded as a legitimate traffic event. Hence, the receiving link will not start probing, and not discover that the peer endpoint is down, at the same time ignoring the periodic RESET messages coming from that endpoint. We have ended up in a stale state where a failed link cannot be re-established. In this commit, we remedy this by nudging the checkpoint only for received STATE messages, not for RESET or ACTIVATE messages. Signed-off-by:
-
Jon Paul Maloy authored
The function net/core/sock.c::__release_sock() runs a tight loop to move buffers from the socket backlog queue to the receive queue. As a security measure, sk_backlog.len of the receiving socket is not set to zero until after the loop is finished, i.e., until the whole backlog queue has been transferred to the receive queue. During this transfer, the data that has already been moved is counted both in the backlog queue and the receive queue, hence giving an incorrect picture of the available queue space for new arriving buffers. This leads to unnecessary rejection of buffers by sk_add_backlog(), which in TIPC leads to unnecessarily broken connections. In this commit, we compensate for this double accounting by adding a counter that keeps track of it. The function socket.c::backlog_rcv() receives buffers one by one from __release_sock(), and adds them to the socket receive queue. If the transfer is successful, it increases a new atomic counter 'tipc_sock::dupl_rcvcnt' with 'truesize' of the transferred buffer. If a new buffer arrives during this transfer and finds the socket busy (owned), we attempt to add it to the backlog. However, when sk_add_backlog() is called, we adjust the 'limit' parameter with the value of the new counter, so that the risk of inadvertent rejection is eliminated. It should be noted that this change does not invalidate the original purpose of zeroing 'sk_backlog.len' after the full transfer. We set an upper limit for dupl_rcvcnt, so that if a 'wild' sender (i.e., one that doesn't respect the send window) keeps pumping in buffers to sk_add_backlog(), he will eventually reach an upper limit, (2 x TIPC_CONN_OVERLOAD_LIMIT). After that, no messages can be added to the backlog, and the connection will be broken. Ordinary, well- behaved senders will never reach this buffer limit at all. Signed-off-by:
-
Jon Paul Maloy authored
Memory overhead when allocating big buffers for data transfer may be quite significant. E.g., truesize of a 64 KB buffer turns out to be 132 KB, 2 x the requested size. This invalidates the "worst case" calculation we have been using to determine the default socket receive buffer limit, which is based on the assumption that 1024x64KB = 67MB buffers may be queued up on a socket. Since TIPC connections cannot survive hitting the buffer limit, we have to compensate for this overhead. We do that in this commit by dividing the fix connection flow control window from 1024 (2*512) messages to 512 (2*256). Since older version nodes send out acks at 512 message intervals, compatibility with such nodes is guaranteed, although performance may be non-optimal in such cases. Signed-off-by:
-
dingtianhong authored
The struct ad_slave_info is very huge, and only be used for 802.3ad mode, so alloc the structure dynamically could save 356 Bits for every slave in non 802.3ad mode. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Veaceslav Falico <vfalico@gmail.com> Signed-off-by:
-
- 13 May, 2014 5 commits
-
-
Sergei Shtylyov authored
When I was converting the driver to the managed device API, only devm_kzalloc() was available for memory allocation, so I had to use it, despite zeroing out the PHY IRQ array right before initializing all its entries to PHY_POLL was quite stupid. Now that devm_kmalloc_array() has become available, we can avoid the needless zeroing out... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== tg3: TSO related enhancements to prevent memory allocation failure Michael Chan (3): tg3: Don't modify ip header fields when doing GSO tg3: Prevent page allocation failure during TSO workaround tg3: Update copyright and version to 3.137 ==================== Signed-off-by: -
Michael Chan authored
Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Michael Chan authored
If any TSO fragment hits hardware bug conditions (e.g. 4G boundary), the driver will workaround by calling skb_copy() to copy to a linear SKB. Users have reported page allocation failures as the TSO packet can be up to 64K. Copying such a large packet is also very inefficient. We fix this by using existing tg3_tso_bug() to transmit the packet using GSO. Signed-off-by:
Prashant Sreedharan <prashant@broadcom.com> Signed-off-by:
-
Michael Chan authored
tg3 uses GSO as workaround if the hardware cannot perform TSO on certain packets. We should not modify the ip header fields if we do GSO on the packet. It happens to work by accident because GSO recalculates the IP checksum and IP total length. Also fix the tg3_start_xmit comment to reflect that this is the only xmit function for all devices. Signed-off-by:
-
