- 01 Dec, 2019 20 commits
-
-
Johannes Weiner authored
Setting a memory.high limit below the usage makes almost no effort to shrink the cgroup to the new target size. While memory.high is a "soft" limit that isn't supposed to cause OOM situations, we should still try harder to meet a user request through persistent reclaim. For example, after setting a 10M memory.high on an 800M cgroup full of file cache, the usage shrinks to about 350M: + cat /cgroup/workingset/memory.current 841568256 + echo 10M + cat /cgroup/workingset/memory.current 355729408 This isn't exactly what the user would expect to happen. Setting the value a few more times eventually whittles the usage down to what we are asking for: + echo 10M + cat /cgroup/workingset/memory.current 104181760 + echo 10M + cat /cgroup/workingset/memory.current 31801344 + echo 10M + cat /cgroup/workingset/memory.current 10440704 To improve this, add reclaim retry loops to the memory.high write() callback, similar to what we do for memory.max, to make a reasonable effort that the usage meets the requested size after the call returns. Afterwards, a single write() to memory.high is enough in all but extreme cases: + cat /cgroup/workingset/memory.current 841609216 + echo 10M + cat /cgroup/workingset/memory.current 10182656 790M is not a reasonable reclaim target to ask of a single reclaim invocation. And it wouldn't be reasonable to optimize the reclaim code for it. So asking for the full size but retrying is not a bad choice here: we express our intent, and benefit if reclaim becomes better at handling larger requests, but we also acknowledge that some of the deltas we can encounter in memory_high_write() are just too ridiculously big for a single reclaim invocation to manage. Link: http://lkml.kernel.org/r/20191022201518.341216-2-hannes@cmpxchg.orgSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
When the reclaim loop in memory_max_write() is ^C'd or similar, we set err to -EINTR. But we don't return err. Once the limit is set, we always return success (nbytes). Delete the dead code. Link: http://lkml.kernel.org/r/20191022201518.341216-1-hannes@cmpxchg.orgSigned-off-by:
-
Yafang Shao authored
The mem_cgroup_reclaim_cookie is only used in memcg softlimit reclaim now, and the priority of the reclaim is always 0. We don't need to define the iter in struct mem_cgroup_per_node as an array any more. That could make the code more clear and save some space. Link: http://lkml.kernel.org/r/1569897728-1686-1-git-send-email-laoar.shao@gmail.comSigned-off-by:
Yafang Shao <laoar.shao@gmail.com> Acked-by:
-
Fengguang Wu authored
This avoids duplicated PageReferenced() calls. No behavior change. Link: http://lkml.kernel.org/r/20191016225326.GB12497@wfg-t540p.sh.intel.comSigned-off-by:
Fengguang Wu <fengguang.wu@intel.com> Reviewed-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by:
-
Naohiro Aota authored
A zoned block device consists of a number of zones. Zones are either conventional and accepting random writes or sequential and requiring that writes be issued in LBA order from each zone write pointer position. For the write restriction, zoned block devices are not suitable for a swap device. Disallow swapon on them. [akpm@linux-foundation.org: reflow and reword comment, per Christoph] Link: http://lkml.kernel.org/r/20191015085814.637837-1-naohiro.aota@wdc.comSigned-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: "Theodore Y. Ts'o" <tytso@mit.edu> Cc: Hannes Reinecke <hare@suse.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Liu Xiang authored
Fix comments of __get_user_pages() and get_user_pages_remote(), make them more clear. Link: http://lkml.kernel.org/r/1572443533-3118-1-git-send-email-liuxiang_1999@126.comSigned-off-by:
Liu Xiang <liuxiang_1999@126.com> Suggested-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
-
zhong jiang authored
check_and_migrate_cma_pages() was recording the result of __get_user_pages_locked() in an unsigned "nr_pages" variable. Because __get_user_pages_locked() returns a signed value that can include negative errno values, this had the effect of hiding errors. Change check_and_migrate_cma_pages() implementation so that it uses a signed variable instead, and propagates the results back to the caller just as other gup internal functions do. This was discovered with the help of unsigned_lesser_than_zero.cocci. Link: http://lkml.kernel.org/r/1571671030-58029-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhong jiang <zhongjiang@huawei.com> Suggested-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Konstantin Khlebnikov authored
generic_file_direct_write() tries to invalidate pagecache after O_DIRECT write. Unlike to similar code in dio_complete() this silently ignores error returned from invalidate_inode_pages2_range(). According to comment this code here because not all filesystems call dio_complete() to do proper invalidation after O_DIRECT write. Noticeable example is a blkdev_direct_IO(). This patch calls dio_warn_stale_pagecache() if invalidation fails. Link: http://lkml.kernel.org/r/157270038294.4812.2238891109785106069.stgit@buzzSigned-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Konstantin Khlebnikov authored
This helper prints warning if direct I/O write failed to invalidate cache, and set EIO at inode to warn usersapce about possible data corruption. See also commit 5a9d929d ("iomap: report collisions between directio and buffered writes to userspace"). Direct I/O is supported by non-disk filesystems, for example NFS. Thus generic code needs this even in kernel without CONFIG_BLOCK. Link: http://lkml.kernel.org/r/157270038074.4812.7980855544557488880.stgit@buzzSigned-off-by:
-
Konstantin Khlebnikov authored
generic_file_direct_write() invalidates cache at entry. Second time this should be done when request completes. But this function calls second invalidation at exit unconditionally even for async requests. This patch skips second invalidation for async requests (-EIOCBQUEUED). Link: http://lkml.kernel.org/r/157270037850.4812.15036239021726025572.stgit@buzzSigned-off-by:
-
Yu Zhao authored
The function doesn't need to return any value, and the check can be done in one pass. There is a behavior change: before the patch, we stop at the first invalid free object; after the patch, we stop at the first invalid object, free or in use. This shouldn't matter because the original behavior isn't intended anyway. Link: http://lkml.kernel.org/r/20191108193958.205102-1-yuzhao@google.comSigned-off-by:
Yu Zhao <yuzhao@google.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by:
-
Yu Zhao authored
Slub doesn't use PG_active and PG_error anymore. Link: http://lkml.kernel.org/r/20191007222023.162256-1-yuzhao@google.comSigned-off-by:
David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Miles Chen authored
With commit ad67b74d ("printk: hash addresses printed with %p"), it is a little bit harder to match the fault addresses printed by check_bytes_and_report() or slab_pad_check() in the dump because the fault addresses may not show up in the dump. Print the offset of the fault addresses to make it easier to match the incorrect poison or padding values in the dump. Before: We have to search the "63" in the dump. If we want to get the offset of 63, we have to count it from the start of Object dump. ============================================================= BUG kmalloc-128 (Not tainted): Poison overwritten ------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: 0x00000000570da294-0x00000000570da294. First byte 0x63 instead of 0x6b ... INFO: Object 0x000000006ebb3b9e @offset=14208 fp=0x0000000065862488 Redzone 00000000a6abccff: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 00000000741c16f0: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 0000000061ad278f: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 000000000467c1bd: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 000000008812766b: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 000000003d9b8f25: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 0000000000d80c33: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 00000000867b0d90: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Object 000000006ebb3b9e: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 000000005ea59a9f: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 000000003ef8bddc: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 000000008190375d: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 000000006df7fb32: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 0000000069474eae: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 0000000008073b7d: 6b 6b 6b 6b 63 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 00000000b45ae74d: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 After: We know the fault address is at @offset=1508, and the Object is at @offset=1408, so we know the fault address is at offset=100 within the object. ========================================================= BUG kmalloc-128 (Not tainted): Poison overwritten --------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: 0x00000000638ec1d1-0x00000000638ec1d1 @offset=1508. First byte 0x63 instead of 0x6b ... INFO: Object 0x000000008171818d @offset=1408 fp=0x0000000066dae230 Redzone 00000000e2697ab6: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 0000000064b6a381: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 00000000e413a234: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 0000000004c1dfeb: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 000000009ad24d42: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 000000002a196a23: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 00000000a7b8468a: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 0000000088db6da3: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Object 000000008171818d: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 000000007c4035d4: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 000000004dd281a4: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 0000000079121dff: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 00000000756682a9: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 0000000053b7e541: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 0000000091f8d530: 6b 6b 6b 6b 63 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 000000009c76035c: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 Link: http://lkml.kernel.org/r/20190925140807.20490-1-miles.chen@mediatek.comSigned-off-by:
Miles Chen <miles.chen@mediatek.com> Reviewed-by:
-
Pengfei Li authored
The type of local variable *type* of new_kmalloc_cache() should be enum kmalloc_cache_type instead of int, so correct it. Link: http://lkml.kernel.org/r/1569241648-26908-4-git-send-email-lpf.vector@gmail.comSigned-off-by:
Pengfei Li <lpf.vector@gmail.com> Acked-by:
Roman Gushchin <guro@fb.com> Acked-by:
-
Pengfei Li authored
The size of kmalloc can be obtained from kmalloc_info[], so remove kmalloc_size() that will not be used anymore. Link: http://lkml.kernel.org/r/1569241648-26908-3-git-send-email-lpf.vector@gmail.comSigned-off-by:
-
Pengfei Li authored
Patch series "mm, slab: Make kmalloc_info[] contain all types of names", v6. There are three types of kmalloc, KMALLOC_NORMAL, KMALLOC_RECLAIM and KMALLOC_DMA. The name of KMALLOC_NORMAL is contained in kmalloc_info[].name, but the names of KMALLOC_RECLAIM and KMALLOC_DMA are dynamically generated by kmalloc_cache_name(). Patch1 predefines the names of all types of kmalloc to save the time spent dynamically generating names. These changes make sense, and the time spent by new_kmalloc_cache() has been reduced by approximately 36.3%. Time spent by new_kmalloc_cache() (CPU cycles) 5.3-rc7 66264 5.3-rc7+patch 42188 This patch (of 3): There are three types of kmalloc, KMALLOC_NORMAL, KMALLOC_RECLAIM and KMALLOC_DMA. The name of KMALLOC_NORMAL is contained in kmalloc_info[].name, but the names of KMALLOC_RECLAIM and KMALLOC_DMA are dynamically generated by kmalloc_cache_name(). This patch predefines the names of all types of kmalloc to save the time spent dynamically generating names. Besides, remove the kmalloc_cache_name() that is no longer used. Link: http://lkml.kernel.org/r/1569241648-26908-2-git-send-email-lpf.vector@gmail.comSigned-off-by: -
Ben Dooks authored
The declarations of __block_write_begin_int and guard_bio_eod are needed from internal.h so include it to fix the following sparse warnings: fs/buffer.c:1930:5: warning: symbol '__block_write_begin_int' was not declared. Should it be static? fs/buffer.c:2994:6: warning: symbol 'guard_bio_eod' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20191011170039.16100-1-ben.dooks@codethink.co.ukSigned-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by:
-
Saurav Girepunje authored
Use true/false for bool return type of has_bh_in_lru(). Link: http://lkml.kernel.org/r/20191029040529.GA7625@sauravSigned-off-by:
Saurav Girepunje <saurav.girepunje@gmail.com> Reviewed-by:
-
Ding Xiang authored
Fix a static code checker warning: fs/ocfs2/acl.c:331 ocfs2_acl_chmod() warn: passing zero to 'PTR_ERR' Link: http://lkml.kernel.org/r/1dee278b-6c96-eec2-ce76-fe6e07c6e20f@linux.alibaba.com Fixes: 5ee0fbd5 ("ocfs2: revert using ocfs2_acl_chmod to avoid inode cluster lock hang") Signed-off-by:
Ding Xiang <dingxiang@cmss.chinamobile.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Colin Ian King authored
Here are some of the more common spelling mistakes and typos that I've found while fixing up spelling mistakes in the kernel since July 2019. Link: http://lkml.kernel.org/r/20191112092142.97989-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 30 Nov, 2019 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull fsnotify updates from Jan Kara: "Three fsnotify cleanups" * tag 'fsnotify_for_v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: Add git tree reference to MAINTAINERS fsnotify/fdinfo: exportfs_encode_inode_fh() takes pointer as 4th argument fsnotify: move declaration of fsnotify_mark_connector_cachep to fsnotify.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull ext2, quota, reiserfs cleanups and fixes from Jan Kara: - Refactor the quota on/off kernel internal interfaces (mostly for ubifs quota support as ubifs does not want to have inodes holding quota information) - A few other small quota fixes and cleanups - Various small ext2 fixes and cleanups - Reiserfs xattr fix and one cleanup * tag 'for_v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (28 commits) ext2: code cleanup for descriptor_loc() fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long ext2: fix improper function comment ext2: code cleanup for ext2_try_to_allocate() ext2: skip unnecessary operations in ext2_try_to_allocate() ext2: Simplify initialization in ext2_try_to_allocate() ext2: code cleanup by calling ext2_group_last_block_no() ext2: introduce new helper ext2_group_last_block_no() reiserfs: replace open-coded atomic_dec_and_mutex_lock() ext2: check err when partial != NULL quota: Handle quotas without quota inodes in dquot_get_state() quota: Make dquot_disable() work without quota inodes quota: Drop dquot_enable() fs: Use dquot_load_quota_inode() from filesystems quota: Rename vfs_load_quota_inode() to dquot_load_quota_inode() quota: Simplify dquot_resume() quota: Factor out setup of quota inode quota: Check that quota is not dirty before release quota: fix livelock in dquot_writeback_dquots ext2: don't set *count in the case of failure in ext2_try_to_allocate() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofsLinus Torvalds authored
Pull erofs updates from Gao Xiang: "No major kernel updates for this round since I'm fully diving into LZMA algorithm internals now to provide high CR XZ algorihm support. That needs more work and time for me to get a better compression time. Summary: - Introduce superblock checksum support - Set iowait when waiting I/O for sync decompression path - Several code cleanups" * tag 'erofs-for-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: remove unnecessary output in erofs_show_options() erofs: drop all vle annotations for runtime names erofs: support superblock checksum erofs: set iowait for sync decompression erofs: clean up decompress queue stuffs erofs: get rid of __stagingpage_alloc helper erofs: remove dead code since managed cache is now built-in erofs: clean up collection handling routines
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs updates from Steve French: "Various smb3 fixes (including 12 for stable) and also features (addition of multichannel support)" * tag '5.5-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (41 commits) CIFS: fix a white space issue in cifs_get_inode_info() cifs: update internal module version number cifs: Always update signing key of first channel cifs: Fix retrieval of DFS referrals in cifs_mount() cifs: Fix potential softlockups while refreshing DFS cache cifs: Fix lookup of root ses in DFS referral cache cifs: Fix use-after-free bug in cifs_reconnect() cifs: dump channel info in DebugData smb3: dump in_send and num_waiters stats counters by default cifs: try harder to open new channels CIFS: Properly process SMB3 lease breaks cifs: move cifsFileInfo_put logic into a work-queue cifs: try opening channels after mounting CIFS: refactor cifs_get_inode_info() cifs: switch servers depending on binding state cifs: add server param cifs: add multichannel mount options and data structs cifs: sort interface list by speed CIFS: Fix SMB2 oplock break processing cifs: don't use 'pre:' for MODULE_SOFTDEP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "In this round, we've introduced fairly small number of patches as below. Enhancements: - improve the in-place-update IO flow - allocate segment to guarantee no GC for pinned files Bug fixes: - fix updatetime in lazytime mode - potential memory leak in f2fs_listxattr - record parent inode number in rename2 correctly - fix deadlock in f2fs_gc along with atomic writes - avoid needless data migration in GC" * tag 'f2fs-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: stop GC when the victim becomes fully valid f2fs: expose main_blkaddr in sysfs f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project() f2fs: Fix deadlock in f2fs_gc() context during atomic files handling f2fs: show f2fs instance in printk_ratelimited f2fs: fix potential overflow f2fs: fix to update dir's i_pino during cross_rename f2fs: support aligned pinned file f2fs: avoid kernel panic on corruption test f2fs: fix wrong description in document f2fs: cache global IPU bio f2fs: fix to avoid memory leakage in f2fs_listxattr f2fs: check total_segments from devices in raw_super f2fs: update multi-dev metadata in resize_fs f2fs: mark recovery flag correctly in read_raw_super_block() f2fs: fix to update time in lazytime mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsLinus Torvalds authored
Pull AFS updates from David Howells: "Minor cleanups and fix: - Minor fix to make some debugging statements display information from the correct iov_iter. - Rename some members and variables to make things more obvious or consistent. - Provide a helper to wrap increments of the usage count on the afs_read struct. - Use scnprintf() to print into a stack buffer rather than sprintf(). - Remove some set but unused variables" * tag 'afs-next-20191121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Remove set but not used variable 'ret' afs: Remove set but not used variables 'before', 'after' afs: xattr: use scnprintf afs: Introduce an afs_get_read() refcount helper afs: Rename desc -> req in afs_fetch_data() afs: Switch the naming of call->iter and call->_iter afs: Use call->_iter not &call->iter in debugging statements -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 updates from Ted Ts'o: "This merge window saw the the following new featuers added to ext4: - Direct I/O via iomap (required the iomap-for-next branch from Darrick as a prereq). - Support for using dioread-nolock where the block size < page size. - Support for encryption for file systems where the block size < page size. - Rework of journal credits handling so a revoke-heavy workload will not cause the journal to run out of space. - Replace bit-spinlocks with spinlocks in jbd2 Also included were some bug fixes and cleanups, mostly to clean up corner cases from fuzzed file systems and error path handling" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (59 commits) ext4: work around deleting a file with i_nlink == 0 safely ext4: add more paranoia checking in ext4_expand_extra_isize handling jbd2: make jbd2_handle_buffer_credits() handle reserved handles ext4: fix a bug in ext4_wait_for_tail_page_commit ext4: bio_alloc with __GFP_DIRECT_RECLAIM never fails ext4: code cleanup for get_next_id ext4: fix leak of quota reservations ext4: remove unused variable warning in parse_options() ext4: Enable encryption for subpage-sized blocks fs/buffer.c: support fscrypt in block_read_full_page() ext4: Add error handling for io_end_vec struct allocation jbd2: Fine tune estimate of necessary descriptor blocks jbd2: Provide trace event for handle restarts ext4: Reserve revoke credits for freed blocks jbd2: Make credit checking more strict jbd2: Rename h_buffer_credits to h_total_credits jbd2: Reserve space for revoke descriptor blocks jbd2: Drop jbd2_space_needed() jbd2: Account descriptor blocks into t_outstanding_credits jbd2: Factor out common parts of stopping and restarting a handle ... -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull splice fix from Darrick Wong: "Fix another place in the splice code where a pipe could ask a filesystem for a longer read than the pipe actually has free buffer space" * tag 'vfs-5.5-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: splice: only read in as much information as there is pipe buffer space
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull iomap updates from Darrick Wong: "In this release, we hoisted as much of XFS' writeback code into iomap as was practicable, refactored the unshare file data function, added the ability to perform buffered io copy on write, and tweaked various parts of the directio implementation as needed to port ext4's directio code (that will be a separate pull). Summary: - Make iomap_dio_rw callers explicitly tell us if they want us to wait - Port the xfs writeback code to iomap to complete the buffered io library functions - Refactor the unshare code to share common pieces - Add support for performing copy on write with buffered writes - Other minor fixes - Fix unchecked return in iomap_bmap - Fix a type casting bug in a ternary statement in iomap_dio_bio_actor - Improve tracepoints for easier diagnostic ability - Fix pipe page leakage in directio reads" * tag 'iomap-5.5-merge-11' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (31 commits) iomap: Fix pipe page leakage during splicing iomap: trace iomap_appply results iomap: fix return value of iomap_dio_bio_actor on 32bit systems iomap: iomap_bmap should check iomap_apply return value iomap: Fix overflow in iomap_page_mkwrite fs/iomap: remove redundant check in iomap_dio_rw() iomap: use a srcmap for a read-modify-write I/O iomap: renumber IOMAP_HOLE to 0 iomap: use write_begin to read pages to unshare iomap: move the zeroing case out of iomap_read_page_sync iomap: ignore non-shared or non-data blocks in xfs_file_dirty iomap: always use AOP_FLAG_NOFS in iomap_write_begin iomap: remove the unused iomap argument to __iomap_write_end iomap: better document the IOMAP_F_* flags iomap: enhance writeback error message iomap: pass a struct page to iomap_finish_page_writeback iomap: cleanup iomap_ioend_compare iomap: move struct iomap_page out of iomap.h iomap: warn on inline maps in iomap_writepage_map iomap: lift the xfs writeback code to iomap ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull hmm updates from Jason Gunthorpe: "This is another round of bug fixing and cleanup. This time the focus is on the driver pattern to use mmu notifiers to monitor a VA range. This code is lifted out of many drivers and hmm_mirror directly into the mmu_notifier core and written using the best ideas from all the driver implementations. This removes many bugs from the drivers and has a very pleasing diffstat. More drivers can still be converted, but that is for another cycle. - A shared branch with RDMA reworking the RDMA ODP implementation - New mmu_interval_notifier API. This is focused on the use case of monitoring a VA and simplifies the process for drivers - A common seq-count locking scheme built into the mmu_interval_notifier API usable by drivers that call get_user_pages() or hmm_range_fault() with the VA range - Conversion of mlx5 ODP, hfi1, radeon, nouveau, AMD GPU, and Xen GntDev drivers to the new API. This deletes a lot of wonky driver code. - Two improvements for hmm_range_fault(), from testing done by Ralph" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: mm/hmm: remove hmm_range_dma_map and hmm_range_dma_unmap mm/hmm: make full use of walk_page_range() xen/gntdev: use mmu_interval_notifier_insert mm/hmm: remove hmm_mirror and related drm/amdgpu: Use mmu_interval_notifier instead of hmm_mirror drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror drm/amdgpu: Call find_vma under mmap_sem nouveau: use mmu_interval_notifier instead of hmm_mirror nouveau: use mmu_notifier directly for invalidate_range_start drm/radeon: use mmu_interval_notifier_insert RDMA/hfi1: Use mmu_interval_notifier_insert for user_exp_rcv RDMA/odp: Use mmu_interval_notifier_insert() mm/hmm: define the pre-processor related parts of hmm.h even if disabled mm/hmm: allow hmm_range to be used with a mmu_interval_notifier or hmm_mirror mm/mmu_notifier: add an interval tree notifier mm/mmu_notifier: define the header pre-processor parts even if disabled mm/hmm: allow snapshot of the special zero page -
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm coherent memory support for vmwgfx from Dave Airlie: "This is a separate pull for the mm pagewalking + drm/vmwgfx work Thomas did and you were involved in, I've left it separate in case you don't feel as comfortable with it as the other stuff. It has mm acks/r-b in the right places from what I can see" * tag 'drm-vmwgfx-coherent-2019-11-29' of git://anongit.freedesktop.org/drm/drm: drm/vmwgfx: Add surface dirty-tracking callbacks drm/vmwgfx: Implement an infrastructure for read-coherent resources drm/vmwgfx: Use an RBtree instead of linked list for MOB resources drm/vmwgfx: Implement an infrastructure for write-coherent resources mm: Add write-protect and clean utilities for address space ranges mm: Add a walk_page_mapping() function to the pagewalk code mm: pagewalk: Take the pagetable lock in walk_pte_range() mm: Remove BUG_ON mmap_sem not held from xxx_trans_huge_lock() drm/ttm: Convert vm callbacks to helpers drm/ttm: Remove explicit typecasts of vm_private_data
-
- 28 Nov, 2019 6 commits
-
-
Linus Torvalds authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve dma-debug scalability (Eric Dumazet) - tiny dma-debug cleanup (Dan Carpenter) - check for vmap memory in dma_map_single (Kees Cook) - check for dma_addr_t overflows in dma-direct when using DMA offsets (Nicolas Saenz Julienne) - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas Saenz Julienne) - fix arm-nommu dma-ranges handling (Vladimir Murzin) - use __initdata in CMA (Shyam Saini) - replace the bus dma mask with a limit (Nicolas Saenz Julienne) - merge the remapping helpers into the main dma-direct flow (me) - switch xtensa to the generic dma remap handling (me) - various cleanups around dma_capable (me) - remove unused dev arguments to various dma-noncoherent helpers (me) * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: * tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits) dma-mapping: treat dev->bus_dma_mask as a DMA limit dma-direct: exclude dma_direct_map_resource from the min_low_pfn check dma-direct: don't check swiotlb=force in dma_direct_map_resource dma-debug: clean up put_hash_bucket() powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys dma-direct: avoid a forward declaration for phys_to_dma dma-direct: unify the dma_capable definitions dma-mapping: drop the dev argument to arch_sync_dma_for_* x86/PCI: sta2x11: use default DMA address translation dma-direct: check for overflows on 32 bit DMA addresses dma-debug: increase HASH_SIZE dma-debug: reorder struct dma_debug_entry fields xtensa: use the generic uncached segment support dma-mapping: merge the generic remapping helpers into dma-direct dma-direct: provide mmap and get_sgtable method overrides dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages dma-direct: remove __dma_direct_free_pages usb: core: Remove redundant vmap checks kernel: dma-contiguous: mark CMA parameters __initdata/__initconst dma-debug: add a schedule point in debug_dma_dump_mappings() ...
-
git://git.infradead.org/users/hch/ioremapLinus Torvalds authored
Pull generic ioremap support from Christoph Hellwig: "This adds the remaining bits for an entirely generic ioremap and iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant mess of weird ioremap variants we had with no users outside the arch code. For now just the three newest ports use the code, but there is more than a handful others that can be converted without too much work. Summary: - clean up various obsolete ioremap and iounmap variants - add a new generic ioremap implementation and switch csky, nds32 and riscv over to it" * tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits) nds32: use generic ioremap csky: use generic ioremap csky: remove ioremap_cache riscv: use the generic ioremap code lib: provide a simple generic ioremap implementation sh: remove __iounmap nios2: remove __iounmap hexagon: remove __iounmap m68k: rename __iounmap and mark it static arch: rely on asm-generic/io.h for default ioremap_* definitions asm-generic: don't provide ioremap for CONFIG_MMU asm-generic: ioremap_uc should behave the same with and without MMU xtensa: clean up ioremap x86: Clean up ioremap() parisc: remove __ioremap nios2: remove __ioremap alpha: remove the unused __ioremap wrapper hexagon: clean up ioremap ia64: rename ioremap_nocache to ioremap_uc unicore32: remove ioremap_cached ... -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more io_uring updates from Jens Axboe: "As mentioned in the first pull request, there was a later batch as well. This contains fixes to the stuff that already went in, cleanups, and a few later additions. In particular, this contains: - Cleanups/fixes/unification of the submission and completion path (Pavel,me) - Linked timeouts improvements (Pavel,me) - Error path fixes (me) - Fix lookup window where cancellations wouldn't work (me) - Improve DRAIN support (Pavel) - Fix backlog flushing -EBUSY on submit (me) - Add support for connect(2) (me) - Fix for non-iter based fixed IO (Pavel) - creds inheritance for async workers (me) - Disable cmsg/ancillary data for sendmsg/recvmsg (me) - Shrink io_kiocb to 3 cachelines (me) - NUMA fix for io-wq (Jann)" * tag 'for-5.5/io_uring-post-20191128' of git://git.kernel.dk/linux-block: (42 commits) io_uring: make poll->wait dynamically allocated io-wq: shrink io_wq_work a bit io-wq: fix handling of NUMA node IDs io_uring: use kzalloc instead of kcalloc for single-element allocations io_uring: cleanup io_import_fixed() io_uring: inline struct sqe_submit io_uring: store timeout's sqe->off in proper place net: disallow ancillary data for __sys_{send,recv}msg_file() net: separate out the msghdr copy from ___sys_{send,recv}msg() io_uring: remove superfluous check for sqe->off in io_accept() io_uring: async workers should inherit the user creds io-wq: have io_wq_create() take a 'data' argument io_uring: fix dead-hung for non-iter fixed rw io_uring: add support for IORING_OP_CONNECT net: add __sys_connect_file() helper io_uring: only return -EBUSY for submit on non-flushed backlog io_uring: only !null ptr to io_issue_sqe() io_uring: simplify io_req_link_next() io_uring: pass only !null to io_req_find_next() io_uring: remove io_free_req_find_next() ... -
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
Graphics APIs like OpenGL 4.4 and Vulkan require the graphics driver to provide coherent graphics memory, meaning that the GPU sees any content written to the coherent memory on the next GPU operation that touches that memory, and the CPU sees any content written by the GPU to that memory immediately after any fence object trailing the GPU operation is signaled. Paravirtual drivers that otherwise require explicit synchronization needs to do this by hooking up dirty tracking to pagefault handlers and buffer object validation. Provide mm helpers needed for this and that also allow for huge pmd- and pud entries (patch 1-3), and the associated vmwgfx code (patch 4-7). The code has been tested and exercised by a tailored version of mesa where we disable all explicit synchronization and assume graphics memory is coherent. The performance loss varies of course; a typical number is around 5%. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas_os@shipmail.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191113131639.4653-1-thomas_os@shipmail.org
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm updates from Dave Airlie: "Lots of stuff in here, though it hasn't been too insane this merge apart from dealing with the security fun. uapi: - export different colorspace properties on DP vs HDMI - new fourcc for ARM 16x16 block format - syncobj: allow querying last submitted timeline value - DRM_FORMAT_BIG_ENDIAN defined as unsigned core: - allow using gem vma manager in ttm - connector/encoder/bridge doc fixes - allow more than 3 encoders for a connector - displayport mst suspend/resume reprobing support - vram lazy unmapping, uniform vram mm and gem vram - edid cleanups + AVI informframe bar info - displayport helpers - dpcd parser added dp_cec: - Allow a connector to be associated with a cec device ttm: - pipelining with no_gpu_wait fix - always keep BOs on the LRU sched: - allow free_job routine to sleep i915: - Block userptr from mappable GTT - i915 perf uapi versioning - OA stream dynamic reconfiguration - make context persistence optional - introduce DRM_I915_UNSTABLE Kconfig - add fake lmem testing under unstable - BT.2020 support for DP MSA - struct mutex elimination - Tigerlake display/PLL/power management improvements - Jasper Lake PCH support - refactor PMU for multiple GPUs - Icelake firmware update - Split out vga + switcheroo code amdgpu: - implement dma-buf import/export without helpers - vega20 RAS enablement - DC i2c over aux fixes - renoir GPU reset - DC HDCP support - BACO support for CI/VI asics - MSI-X support - Arcturus EEPROM support - Arcturus VCN encode support - VCN dynamic powergating on RV/RV2 amdkfd: - add navi12/14/renoir support to kfd radeon: - SI dpm fix ported from amdgpu - fix bad DMA on ppc platforms gma500: - memory leak fixes qxl: - convert to new gem mmap exynos: - build warning fix komeda: - add aclk sysfs attribute v3d: - userspace cleanup uapi change i810: - fix for underflow in dispatch ioctls ast: - refactor show_cursor mgag200: - refactor show_cursor arcgpu: - encoder finding improvements mediatek: - mipi_tx, dsi and partial crtc support for MT8183 SoC - rotation support meson: - add suspend/resume support omap: - misc refactors tegra: - DisplayPort support for Tegra 210, 186 and 194. - IOMMU-backed DMA API fixes panfrost: - fix lockdep issue - simplify devfreq integration rcar-du: - R8A774B1 SoC support - fixes for H2 ES2.0 sun4i: - vcc-dsi regulator support virtio-gpu: - vmexit vs spinlock fix - move to gem shmem helpers - handle large command buffers with cma" * tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm: (1855 commits) drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10 drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub drm/amd/amdgpu/sriov skip RLCG s/r list for arcturus VF. drm/amd/amdgpu/sriov temporarily skip ras,dtm,hdcp for arcturus VF drm/amdgpu/gfx10: re-init clear state buffer after gpu reset merge fix for "ftrace: Rework event_create_dir()" drm/amdgpu: Update Arcturus golden registers drm/amdgpu/gfx10: fix out-of-bound mqd_backup array access drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt Revert "drm/amd/display: enable S/G for RAVEN chip" drm/amdgpu: disable gfxoff on original raven drm/amdgpu: remove experimental flag for Navi14 drm/amdgpu: disable gfxoff when using register read interface drm/amdgpu/powerplay: properly set PP_GFXOFF_MASK (v2) drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2 drm/radeon: fix bad DMA from INTERRUPT_CNTL2 drm/amd/display: Fix debugfs on MST connectors drm/amdgpu/nv: add asic func for fetching vbios from rom directly drm/amdgpu: put flush_delayed_work at first drm/amdgpu/vcn2.5: fix the enc loop with hw fini ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: "This is mostly to fix the iwlwifi regression: 1) Flush GRO state properly in iwlwifi driver, from Alexander Lobakin. 2) Validate TIPC link name with properly length macro, from John Rutherford. 3) Fix completion init and device query timeouts in ibmvnic, from Thomas Falcon. 4) Fix SKB size calculation for netlink messages in psample, from Nikolay Aleksandrov. 5) Similar kind of fix for OVS flow dumps, from Paolo Abeni. 6) Handle queue allocation failure unwind properly in gve driver, we could try to release pages we didn't allocate. From Jeroen de Borst. 7) Serialize TX queue SKB list accesses properly in mscc ocelot driver. From Yangbo Lu" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: net: usb: aqc111: Use the correct style for SPDX License Identifier net: phy: Use the correct style for SPDX License Identifier net: wireless: intel: iwlwifi: fix GRO_NORMAL packet stalling net: mscc: ocelot: use skb queue instead of skbs list net: mscc: ocelot: avoid incorrect consuming in skbs list gve: Fix the queue page list allocated pages count net: inet_is_local_reserved_port() port arg should be unsigned short openvswitch: fix flow command message size net: phy: dp83869: Fix return paths to return proper values net: psample: fix skb_over_panic net: usbnet: Fix -Wcast-function-type net: hso: Fix -Wcast-function-type net: port < inet_prot_sock(net) --> inet_port_requires_bind_service(net, port) ibmvnic: Serialize device queries ibmvnic: Bound waits for device queries ibmvnic: Terminate waiting device threads after loss of service ibmvnic: Fix completion structure initialization net-sctp: replace some sock_net(sk) with just 'net' net: Fix a documentation bug wrt. ip_unprivileged_port_start tipc: fix link name length check
-
- 27 Nov, 2019 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing updates from Steven Rostedt: "New tracing features: - New PERMANENT flag to ftrace_ops when attaching a callback to a function. As /proc/sys/kernel/ftrace_enabled when set to zero will disable all attached callbacks in ftrace, this has a detrimental impact on live kernel tracing, as it disables all that it patched. If a ftrace_ops is registered to ftrace with the PERMANENT flag set, it will prevent ftrace_enabled from being disabled, and if ftrace_enabled is already disabled, it will prevent a ftrace_ops with PREMANENT flag set from being registered. - New register_ftrace_direct(). As eBPF would like to register its own trampolines to be called by the ftrace nop locations directly, without going through the ftrace trampoline, this function has been added. This allows for eBPF trampolines to live along side of ftrace, perf, kprobe and live patching. It also utilizes the ftrace enabled_functions file that keeps track of functions that have been modified in the kernel, to allow for security auditing. - Allow for kernel internal use of ftrace instances. Subsystems in the kernel can now create and destroy their own tracing instances which allows them to have their own tracing buffer, and be able to record events without worrying about other users from writing over their data. - New seq_buf_hex_dump() that lets users use the hex_dump() in their seq_buf usage. - Notifications now added to tracing_max_latency to allow user space to know when a new max latency is hit by one of the latency tracers. - Wider spread use of generic compare operations for use of bsearch and friends. - More synthetic event fields may be defined (32 up from 16) - Use of xarray for architectures with sparse system calls, for the system call trace events. This along with small clean ups and fixes" * tag 'trace-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (51 commits) tracing: Enable syscall optimization for MIPS tracing: Use xarray for syscall trace events tracing: Sample module to demonstrate kernel access to Ftrace instances. tracing: Adding new functions for kernel access to Ftrace instances tracing: Fix Kconfig indentation ring-buffer: Fix typos in function ring_buffer_producer ftrace: Use BIT() macro ftrace: Return ENOTSUPP when DYNAMIC_FTRACE_WITH_DIRECT_CALLS is not configured ftrace: Rename ftrace_graph_stub to ftrace_stub_graph ftrace: Add a helper function to modify_ftrace_direct() to allow arch optimization ftrace: Add helper find_direct_entry() to consolidate code ftrace: Add another check for match in register_ftrace_direct() ftrace: Fix accounting bug with direct->count in register_ftrace_direct() ftrace/selftests: Fix spelling mistake "wakeing" -> "waking" tracing: Increase SYNTH_FIELDS_MAX for synthetic_events ftrace/samples: Add a sample module that implements modify_ftrace_direct() ftrace: Add modify_ftrace_direct() tracing: Add missing "inline" in stub function of latency_fsnotify() tracing: Remove stray tab in TRACE_EVAL_MAP_FILE's help text tracing: Use seq_buf_hex_dump() to dump buffers ... -
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull Microblaze updates from Michal Simek: - extend DTB space - defconfig update - clean up rescheduling logic - enable SPARSE_IRQ * tag 'microblaze-v5.5-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Increase max dtb size to 64K from 32K microblaze: Enable SPARSE_IRQ microblaze: defconfig: Enable devtmps and tmpfs microblaze: entry: Remove unneeded need_resched() loop
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V updates from Paul Walmsley: "New features: - SECCOMP support - nommu support - SBI-less system support - M-Mode support - TLB flush optimizations Other improvements: - Pass the complete RISC-V ISA string supported by the CPU cores to userspace, rather than redacting parts of it in the kernel - Add platform DMA IP block data to the HiFive Unleashed board DT file - Add Makefile support for BZ2, LZ4, LZMA, LZO kernel image compression formats, in line with other architectures Cleanups: - Remove unnecessary PTE_PARENT_SIZE macro - Standardize include guard naming across arch/riscv" * tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits) riscv: provide a flat image loader riscv: add nommu support riscv: clear the instruction cache and all registers when booting riscv: read the hart ID from mhartid on boot riscv: provide native clint access for M-mode riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00 riscv: add support for MMIO access to the timer registers riscv: implement remote sfence.i using IPIs riscv: cleanup the default power off implementation riscv: poison SBI calls for M-mode riscv: don't allow selecting SBI based drivers for M-mode RISC-V: Add multiple compression image format. riscv: clean up the macro format in each header file riscv: Use PMD_SIZE to replace PTE_PARENT_SIZE riscv: abstract out CSR names for supervisor vs machine mode riscv: separate MMIO functions into their own header file riscv: enter WFI in default_power_off() if SBI does not shutdown RISC-V: Issue a tlb page flush if possible RISC-V: Issue a local tlbflush if possible. RISC-V: Do not invoke SBI call if cpumask is empty ...
-
