- 18 Dec, 2018 11 commits
-
-
Roman Li authored
[Why] The visual corruption due to low display clock value observed on some systems [How] There was earlier patch for dspclk: 'drm/amd/display: Raise dispclk value for dce_update_clocks' Adding +15% workaround also to to dce112_update_clocks Signed-off-by:
Roman Li <Roman.Li@amd.com> Reviewed-by:
Leo Li <Sunpeng.Li@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Nicholas Kazlauskas authored
[Why] The behavior of drm_atomic_helper_cleanup_planes differs depending on whether the commit was asynchronous or not. When it's called from amdgpu_dm_atomic_commit_tail during a typical atomic commit the plane state has been swapped so it calls cleanup_fb on the old plane state. However, in the asynchronous commit codepath the call to drm_atomic_helper_commit also calls dm_plane_helper_cleanup_fb after atomic_async_update has been called. Since the plane state is updated in place and has not been swapped the cleanup_fb call affects the new plane state. This results in a use after free for the given sequence: - Fast update, fb1 pin/ref, fb1 unpin/unref - Fast update, fb2 pin/ref, fb2 unpin/unref - Slow update, fb1 pin/ref, fb2 unpin/unref - Fast update, fb2 pin/ref -> use after free. bug [How] Disallow framebuffer changes in the fast path. Since this includes a NULL framebuffer, this means that only framebuffers that have been previously pin+ref at least once will be used, preventing a use after free. This has a significant throughput reduction for cursor updates where the framebuffer changes. For most desktop usage this isn't a problem, but it does introduce performance regressions for two specific IGT tests: - cursor-vs-flip-toggle - cursor-vs-flip-varying-size Fixes: 2cc751931afc ("drm/amd/display: Add fast path for cursor plane updates") Signed-off-by:Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Evan Quan authored
It should not return 0 for error case as '0' is actually a special value for index. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Felix Kuehling authored
On errors, dma_buf_get returns a negative error code, rather than NULL. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
James Zhu authored
If register value is updating, reset timeout counter. It improves robustness of SOC15_WAIT_ON_RREG. Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
James Zhu authored
Remove bit 31 for scratch2 to indicate the Hardware bug work around is active. Signed-off-by:
-
James Zhu authored
Scan enc/jpeg fences to init dpg pause new state in begin use. It will help set dpg mode to desire state actively. Signed-off-by:
-
James Zhu authored
Always check all vcn ring status during dpg mode stop, it will help identify which vcn ring may cause the issue. Signed-off-by:
-
James Zhu authored
It is a bug fix. Signed-off-by:
-
James Zhu authored
Under Dynamic Power Gate mode, UVD_STATUS needn't be checked. Signed-off-by:
-
James Zhu authored
Replace vcn_v1_0_stop with vcn_v1_0_set_powergating_state during suspend, to keep adev->vcn.cur_state update. It will fix VCN S3 hung issue. Signed-off-by:
-
- 14 Dec, 2018 10 commits
-
-
Michel Dänzer authored
It indicates a pin/unpin imbalance bug somewhere. While the bug isn't necessarily in the call chain hitting this, it's at least one part involved. Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Evan Quan authored
Page queue is supported on Vega20 with SDMA firmware 123 onwards. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Evan Quan authored
Vega20 uses ring id 1 for page queues EOP irq while previous ASICs take ring id 3. Signed-off-by:
-
Evan Quan authored
We need new invalidation engine layout due to new SDMA page queues added. V2: fix coding style and add correct return value Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Reviewed-by:
-
Evan Quan authored
As two more SDMA page queue rings are added on Vega20. Signed-off-by:
-
Christian König authored
When the fence is already signaled it is perfectly normal to get a NULL fence here. But since we can't export that we need to use a stub fence. Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
-
Emily Deng authored
Currently driver only psp v11 support vmr. v2: squash in unused variable removal (Alex) Signed-off-by:
Emily Deng <Emily.Deng@amd.com> Reviewed-by:
Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by:
-
Emily Deng authored
If PSP FW is running already, driver will not load PSP FW again and skip it. So psp fw version is not correct if reading it from FW binary file, need to get right version from register. Signed-off-by:
-
Emily Deng authored
There is no need to access register such as mmSMC_IND_INDEX_11 and mmSMC_IND_DATA_11, PCIE_INDEX, PCIE_DATA through KIQ because they are VF-copy. Signed-off-by:
-
wentalou authored
XGMI hive put kfd_pre_reset into amdgpu_device_lock_adev, but outside req_full_gpu of sriov. It would make sriov hang during reset. Signed-off-by:
Wentao Lou <Wentao.Lou@amd.com> Reviewed-by:
Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by:
-
- 13 Dec, 2018 5 commits
-
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
Pull request of 2018-12-13 Two minor fixes for next pull. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181213130848.3080-1-thellstrom@vmware.com
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
This time around, seeing some love for some older hw: - a2xx gpu support for apq8060 (hp touchpad) and imx5 (headless gpu-only mode) - a2xx gpummu support (a2xx was pre-iommu) - mdp4 display support for apq8060/touchpad For display/dpu: - a big pile of continuing dpu fixes and cleanups On the gpu side of things: - per-submit statistics and traceevents for better profiling - a6xx crashdump support - decouple get_iova() and page pinning.. so we can unpin from physical memory inactive bo's while using softpin to lower cpu overhead - new interface to set debug names on GEM BOs and debugfs output improvements - additional submit flag to indicate buffers that are used to dump (so $debugfs/rd cmdstream dumping is useful with softpin + state-objects) Signed-off-by:
-
git://github.com/skeggsb/linuxDave Airlie authored
Mostly just initial support for Turing TU104/TU106 chipsets. Support for TU102 is missing as I don't yet have HW, but it should be trivial to add in later in the merge window (in theory). It's a bit of a rough first pass that'll get improved in future releases as a finish figuring out some of the other HW changes, but it's good enough as it stands for modesetting and suspend/resume etc. Acceleration bring-up is incomplete due to NVIDIA not yet having provided FW images for me to use, though command submission and copy engines are functional already. Signed-off-by:
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/tegra: Changes for v4.21-rc1 These changes contain a couple of minor fixes for host1x and the Falcon library in Tegra DRM. There are also a couple of missing pieces that finally enable support for host1x, VIC and display on Tegra194. I've also added a patch that enables audio over HDMI using the SOR which has been tested, and works, on both Tegra186 and Tegra194. Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
[airlied: make etnaviv build again] amdgpu: - DC trace support - More DC documentation - XGMI hive reset support - Rework IH interaction with KFD - Misc fixes and cleanups - Powerplay updates for newer polaris variants - Add cursor plane update fast path - Enable gpu reset by default on CI parts - Fix config with KFD/HSA not enabled amdkfd: - Limit vram overcommit - dmabuf support - Support for doorbell BOs ttm: - Support for simultaneous submissions to multiple engines scheduler: - Add helpers for hw with preemption support Signed-off-by:
-
- 12 Dec, 2018 2 commits
-
-
Nicholas Kazlauskas authored
[Why] Legacy cursor plane updates from drm helpers go through the full atomic codepath. A high volume of cursor updates through this slow code path can cause subsequent page-flips to skip vblank intervals since each individual update is slow. This problem is particularly noticeable for the compton compositor. [How] A fast path for cursor plane updates is added by using DRM asynchronous commit support provided by async_check and async_update. These don't do a full state/flip_done dependency stall and they don't block other commit work. However, DC still expects itself to be single-threaded for anything that can issue register writes. Screen corruption or hangs can occur if write sequences overlap. Every call that potentially perform register writes needs to be guarded for asynchronous updates to work. The dc_lock mutex was added for this. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106175Signed-off-by:
-
Andrey Grodzovsky authored
I retested Bonaire (gfx7 dGPU) and it works fine. Signed-off-by:
-
- 11 Dec, 2018 12 commits
-
-
Nicholas Kazlauskas authored
[Why] These properties aren't being carried over when the atomic state. This tricks atomic check and commit tail into performing underscan and scaling operations when they aren't needed. With the patch that forced scaling/RMX_ASPECT on by default this results in many unnecessary surface updates and hangs under certain conditions. [How] Duplicate the properties. Fixes: 91b66c47 ("drm/amd/display: Set RMX_ASPECT as default") Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] If the "max bpc" isn't explicitly set in the atomic state then it have a value of 0. This has the correct behavior of limiting a panel to 8bpc in the case where the panel supports 8bpc. In the case of eDP panels this isn't a true assumption - there are panels that can only do 6bpc. Banding occurs for these displays. [How] Initialize the max_bpc when the connector resets to 8bpc. Also carry over the value when the state is duplicated. Bugzilla: https://bugs.freedesktop.org/108825 Fixes: 307638884f72 ("drm/amd/display: Support amdgpu "max bpc" connector property") Signed-off-by:
-
Nicholas Kazlauskas authored
This reverts commit 91b66c47. Forcing RMX_ASPECT as default uses the preferred/native mode's timings for any mode the user selects and scales the image. This provides a a consistently nicer result in the case where the selected mode's refresh rate matches the native mode's refresh but this isn't always the case. For example, if the monitor is 1080p@144Hz and the preferred mode is 60Hz then even if the user selects 1080p@144Hz as their selected mode they'll get 1080p@60Hz. Signed-off-by:
-
Kuehling, Felix authored
This function was renamed in a previous commit. Update the stub function name for builds with CONFIG_HSA_AMD disabled. Fixes: 611736d8 ("drm/amdgpu: Add KFD VRAM limit checking") Acked-by:
-
Jayant Shekhar authored
In case of msm drm bind failure, pm runtime put sync is called from dsi driver which issues an asynchronous put on mdss device. Subsequently when dpu_mdss_destroy is triggered the change will make sure to put the mdss device in suspend and clearing pending work if not scheduled. Signed-off-by:
Jayant Shekhar <jshekhar@codeaurora.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Jordan Crouse authored
Do some cleanup in the static inline functions defined in dpu_media_info.h by cleaning up gotos and unneeded local variables. v3: Added spaces between operators per Seal Paul and Sam Ravnborg Reviewed-by:
Sean Paul <sean@poorly.run> Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
-
Jordan Crouse authored
Remove more static inline functions that are lightly used and/or very simple and easy to build into the calling functions. v3: Fix a nit from Sean Paul v2: Removed another unused function from dpu_hw_lm.c and add back dpu_crtc_get_client_type() since there was a question regarding its usefulness. Reviewed-by:
-
Jordan Crouse authored
Do some debugfs cleanups from across the DPU driver. The DRM destroy functions will do a recursive delete on the entire debugfs node so there is no need to store dentry pointers for the debugfs files that are persistent for the life of the driver. This also means that the destroy functions can go away too. Also, use standard API functions where applicable instead of using hand written code. v3: No changes v2: Add more code; most of the dpu debugfs files should be addressed now. Reviewed-by:
-
Jordan Crouse authored
dpu_irq.c does some unneeded checks and passes control to dpu_core_irq.c The simple functions can be defined in the same file where we use them and the files and their associated hangers on can be deleted. Additionally the postinstall hook isn't used even in dpu_core_irq.c so zap that entire path. v3: No changes Reviewed-by:
-
Jordan Crouse authored
Allow the KMS operation 'irq_postinstall' to be optional so that the target display drivers don't need to define a dummy function if they don't need one. v3: No changes Reviewed-by:
-
Jordan Crouse authored
Outside of superfluous parameter checks the dpu_hw_blk_init() doesn't have any failure paths. Switch it over to be a void function and we can remove error handling paths in all the functions that call it. While we're in those functions remove unneeded initialization for a static variable. v3: No changes v2: Removed a cleanup intended for a different patch Reviewed-by:
-
Jordan Crouse authored
Remove some unused container_of() helper functions. v3: No changes v2: Retained still used helper functions in the name of readability Reviewed-by:
-
