- 27 Sep, 2019 31 commits
-
-
Navid Emamdoost authored
In nfp_flower_spawn_vnic_reprs in the loop if initialization or the allocations fail memory is leaked. Appropriate releases are added. Fixes: b9452452 ("nfp: flower: add per repr private data for LAG offload") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Navid Emamdoost authored
In nfp_flower_spawn_phy_reprs, in the for loop over eth_tbl if any of intermediate allocations or initializations fail memory is leaked. requiered releases are added. Fixes: b9452452 ("nfp: flower: add per repr private data for LAG offload") Signed-off-by:
-
Paul Blakey authored
This a new feature, it is preferred that it defaults to N. We will probe the feature support from userspace before actually using it. Fixes: 95a7233c ('net: openvswitch: Set OvS recirc_id from tc chain index') Signed-off-by:
Paul Blakey <paulb@mellanox.com> Signed-off-by:
-
David Ahern authored
A user reported that vrf create fails when IPv6 is disabled at boot using 'ipv6.disable=1': https://bugzilla.kernel.org/show_bug.cgi?id=204903 The failure is adding fib rules at create time. Add RTNL_FAMILY_IP6MR to the check in vrf_fib_rule if ipv6_mod_enabled is disabled. Fixes: e4a38c0c ("ipv6: add vrf table handling code for ipv6 mcast") Signed-off-by:
David Ahern <dsahern@gmail.com> Cc: Patrick Ruddy <pruddy@vyatta.att-mail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2019-09-27 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix libbpf's BTF dumper to not skip anonymous enum definitions, from Andrii. 2) Fix BTF verifier issues when handling the BTF of vmlinux, from Alexei. 3) Fix nested calls into bpf_event_output() from TCP sockops BPF programs, from Allan. 4) Fix NULL pointer dereference in AF_XDP's xsk map creation when allocation fails, from Jonathan. 5) Remove unneeded 64 byte alignment requirement of the AF_XDP UMEM headroom, from Bjorn. 6) Remove unused XDP_OPTIONS getsockopt() call which results in an error on older kernels, from Toke. 7) Fix a client/server race in tcp_rtt BPF kselftest case, from Stanislav. 8) Fix indentation issue in BTF's btf_enum_check_kflag_member(), from Colin. ==================== Signed-off-by: -
David S. Miller authored
Vlad Buslov says: ==================== Fix Qdisc destroy issues caused by adding fine-grained locking to filter API TC filter API unlocking introduced several new fine-grained locks. The change caused sleeping-while-atomic BUGs in several Qdiscs that call cls APIs which need to obtain new mutex while holding sch tree spinlock. This series fixes affected Qdiscs by ensuring that cls API that became sleeping is only called outside of sch tree lock critical section. ==================== Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Vlad Buslov authored
Recent changes that removed rtnl dependency from rules update path of tc also made tcf_block_put() function sleeping. This function is called from ops->destroy() of several Qdisc implementations, which in turn is called by qdisc_put(). Some Qdiscs call qdisc_put() while holding sch tree spinlock, which results sleeping-while-atomic BUG. Steps to reproduce for sfb: tc qdisc add dev ens1f0 handle 1: root sfb tc qdisc add dev ens1f0 parent 1:10 handle 50: sfq perturb 10 tc qdisc change dev ens1f0 root handle 1: sfb Resulting dmesg: [ 7265.938717] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909 [ 7265.940152] in_atomic(): 1, irqs_disabled(): 0, pid: 28579, name: tc [ 7265.941455] INFO: lockdep is turned off. [ 7265.942744] CPU: 11 PID: 28579 Comm: tc Tainted: G W 5.3.0-rc8+ #721 [ 7265.944065] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 7265.945396] Call Trace: [ 7265.946709] dump_stack+0x85/0xc0 [ 7265.947994] ___might_sleep.cold+0xac/0xbc [ 7265.949282] __mutex_lock+0x5b/0x960 [ 7265.950543] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 7265.951803] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 7265.953022] tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 7265.954248] tcf_block_put_ext.part.0+0x21/0x50 [ 7265.955478] tcf_block_put+0x50/0x70 [ 7265.956694] sfq_destroy+0x15/0x50 [sch_sfq] [ 7265.957898] qdisc_destroy+0x5f/0x160 [ 7265.959099] sfb_change+0x175/0x330 [sch_sfb] [ 7265.960304] tc_modify_qdisc+0x324/0x840 [ 7265.961503] rtnetlink_rcv_msg+0x170/0x4b0 [ 7265.962692] ? netlink_deliver_tap+0x95/0x400 [ 7265.963876] ? rtnl_dellink+0x2d0/0x2d0 [ 7265.965064] netlink_rcv_skb+0x49/0x110 [ 7265.966251] netlink_unicast+0x171/0x200 [ 7265.967427] netlink_sendmsg+0x224/0x3f0 [ 7265.968595] sock_sendmsg+0x5e/0x60 [ 7265.969753] ___sys_sendmsg+0x2ae/0x330 [ 7265.970916] ? ___sys_recvmsg+0x159/0x1f0 [ 7265.972074] ? do_wp_page+0x9c/0x790 [ 7265.973233] ? __handle_mm_fault+0xcd3/0x19e0 [ 7265.974407] __sys_sendmsg+0x59/0xa0 [ 7265.975591] do_syscall_64+0x5c/0xb0 [ 7265.976753] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 7265.977938] RIP: 0033:0x7f229069f7b8 [ 7265.979117] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5 4 [ 7265.981681] RSP: 002b:00007ffd7ed2d158 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 7265.983001] RAX: ffffffffffffffda RBX: 000000005d813ca1 RCX: 00007f229069f7b8 [ 7265.984336] RDX: 0000000000000000 RSI: 00007ffd7ed2d1c0 RDI: 0000000000000003 [ 7265.985682] RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000165c9a0 [ 7265.987021] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001 [ 7265.988309] R13: 000000000047f640 R14: 0000000000000000 R15: 0000000000000000 In sfb_change() function use qdisc_purge_queue() instead of qdisc_tree_flush_backlog() to properly reset old child Qdisc and save pointer to it into local temporary variable. Put reference to Qdisc after sch tree lock is released in order not to call potentially sleeping cls API in atomic section. This is safe to do because Qdisc has already been reset by qdisc_purge_queue() inside sch tree lock critical section. Reported-by: syzbot+ac54455281db908c581e@syzkaller.appspotmail.com Fixes: c266f64d ("net: sched: protect block state with mutex") Suggested-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Vlad Buslov authored
Recent changes that removed rtnl dependency from rules update path of tc also made tcf_block_put() function sleeping. This function is called from ops->destroy() of several Qdisc implementations, which in turn is called by qdisc_put(). Some Qdiscs call qdisc_put() while holding sch tree spinlock, which results sleeping-while-atomic BUG. Steps to reproduce for multiq: tc qdisc add dev ens1f0 root handle 1: multiq tc qdisc add dev ens1f0 parent 1:10 handle 50: sfq perturb 10 ethtool -L ens1f0 combined 2 tc qdisc change dev ens1f0 root handle 1: multiq Resulting dmesg: [ 5539.419344] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909 [ 5539.420945] in_atomic(): 1, irqs_disabled(): 0, pid: 27658, name: tc [ 5539.422435] INFO: lockdep is turned off. [ 5539.423904] CPU: 21 PID: 27658 Comm: tc Tainted: G W 5.3.0-rc8+ #721 [ 5539.425400] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 5539.426911] Call Trace: [ 5539.428380] dump_stack+0x85/0xc0 [ 5539.429823] ___might_sleep.cold+0xac/0xbc [ 5539.431262] __mutex_lock+0x5b/0x960 [ 5539.432682] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 5539.434103] ? __nla_validate_parse+0x51/0x840 [ 5539.435493] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 5539.436903] tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 5539.438327] tcf_block_put_ext.part.0+0x21/0x50 [ 5539.439752] tcf_block_put+0x50/0x70 [ 5539.441165] sfq_destroy+0x15/0x50 [sch_sfq] [ 5539.442570] qdisc_destroy+0x5f/0x160 [ 5539.444000] multiq_tune+0x14a/0x420 [sch_multiq] [ 5539.445421] tc_modify_qdisc+0x324/0x840 [ 5539.446841] rtnetlink_rcv_msg+0x170/0x4b0 [ 5539.448269] ? netlink_deliver_tap+0x95/0x400 [ 5539.449691] ? rtnl_dellink+0x2d0/0x2d0 [ 5539.451116] netlink_rcv_skb+0x49/0x110 [ 5539.452522] netlink_unicast+0x171/0x200 [ 5539.453914] netlink_sendmsg+0x224/0x3f0 [ 5539.455304] sock_sendmsg+0x5e/0x60 [ 5539.456686] ___sys_sendmsg+0x2ae/0x330 [ 5539.458071] ? ___sys_recvmsg+0x159/0x1f0 [ 5539.459461] ? do_wp_page+0x9c/0x790 [ 5539.460846] ? __handle_mm_fault+0xcd3/0x19e0 [ 5539.462263] __sys_sendmsg+0x59/0xa0 [ 5539.463661] do_syscall_64+0x5c/0xb0 [ 5539.465044] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 5539.466454] RIP: 0033:0x7f1fe08177b8 [ 5539.467863] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5 4 [ 5539.470906] RSP: 002b:00007ffe812de5d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 5539.472483] RAX: ffffffffffffffda RBX: 000000005d8135e3 RCX: 00007f1fe08177b8 [ 5539.474069] RDX: 0000000000000000 RSI: 00007ffe812de640 RDI: 0000000000000003 [ 5539.475655] RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000182e9b0 [ 5539.477203] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001 [ 5539.478699] R13: 000000000047f640 R14: 0000000000000000 R15: 0000000000000000 Rearrange locking in multiq_tune() in following ways: - In loop that removes Qdiscs from disabled queues, call qdisc_purge_queue() instead of qdisc_tree_flush_backlog() on Qdisc that is being destroyed. Save the Qdisc in temporary allocated array and call qdisc_put() on each element of the array after sch tree lock is released. This is safe to do because Qdiscs have already been reset by qdisc_purge_queue() inside sch tree lock critical section. - Do the same change for second loop that initializes Qdiscs for newly enabled queues in multiq_tune() function. Since sch tree lock is obtained and released on each iteration of this loop, just call qdisc_put() directly outside of critical section. Don't verify that old Qdisc is not noop_qdisc before releasing reference to it because such check is already performed by qdisc_put*() functions. Fixes: c266f64d ("net: sched: protect block state with mutex") Signed-off-by:
-
Vlad Buslov authored
Recent changes that removed rtnl dependency from rules update path of tc also made tcf_block_put() function sleeping. This function is called from ops->destroy() of several Qdisc implementations, which in turn is called by qdisc_put(). Some Qdiscs call qdisc_put() while holding sch tree spinlock, which results sleeping-while-atomic BUG. Steps to reproduce for htb: tc qdisc add dev ens1f0 root handle 1: htb default 12 tc class add dev ens1f0 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps tc qdisc add dev ens1f0 parent 1:1 handle 40: sfq perturb 10 tc class add dev ens1f0 parent 1:1 classid 1:2 htb rate 100kbps ceil 100kbps Resulting dmesg: [ 4791.148551] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909 [ 4791.151354] in_atomic(): 1, irqs_disabled(): 0, pid: 27273, name: tc [ 4791.152805] INFO: lockdep is turned off. [ 4791.153605] CPU: 19 PID: 27273 Comm: tc Tainted: G W 5.3.0-rc8+ #721 [ 4791.154336] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 4791.155075] Call Trace: [ 4791.155803] dump_stack+0x85/0xc0 [ 4791.156529] ___might_sleep.cold+0xac/0xbc [ 4791.157251] __mutex_lock+0x5b/0x960 [ 4791.157966] ? console_unlock+0x363/0x5d0 [ 4791.158676] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 4791.159395] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 4791.160103] tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0 [ 4791.160815] tcf_block_put_ext.part.0+0x21/0x50 [ 4791.161530] tcf_block_put+0x50/0x70 [ 4791.162233] sfq_destroy+0x15/0x50 [sch_sfq] [ 4791.162936] qdisc_destroy+0x5f/0x160 [ 4791.163642] htb_change_class.cold+0x5df/0x69d [sch_htb] [ 4791.164505] tc_ctl_tclass+0x19d/0x480 [ 4791.165360] rtnetlink_rcv_msg+0x170/0x4b0 [ 4791.166191] ? netlink_deliver_tap+0x95/0x400 [ 4791.166907] ? rtnl_dellink+0x2d0/0x2d0 [ 4791.167625] netlink_rcv_skb+0x49/0x110 [ 4791.168345] netlink_unicast+0x171/0x200 [ 4791.169058] netlink_sendmsg+0x224/0x3f0 [ 4791.169771] sock_sendmsg+0x5e/0x60 [ 4791.170475] ___sys_sendmsg+0x2ae/0x330 [ 4791.171183] ? ___sys_recvmsg+0x159/0x1f0 [ 4791.171894] ? do_wp_page+0x9c/0x790 [ 4791.172595] ? __handle_mm_fault+0xcd3/0x19e0 [ 4791.173309] __sys_sendmsg+0x59/0xa0 [ 4791.174024] do_syscall_64+0x5c/0xb0 [ 4791.174725] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 4791.175435] RIP: 0033:0x7f0aa41497b8 [ 4791.176129] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5 4 [ 4791.177532] RSP: 002b:00007fff4e37d588 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 4791.178243] RAX: ffffffffffffffda RBX: 000000005d8132f7 RCX: 00007f0aa41497b8 [ 4791.178947] RDX: 0000000000000000 RSI: 00007fff4e37d5f0 RDI: 0000000000000003 [ 4791.179662] RBP: 0000000000000000 R08: 0000000000000001 R09: 00000000020149a0 [ 4791.180382] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001 [ 4791.181100] R13: 000000000047f640 R14: 0000000000000000 R15: 0000000000000000 In htb_change_class() function save parent->leaf.q to local temporary variable and put reference to it after sch tree lock is released in order not to call potentially sleeping cls API in atomic section. This is safe to do because Qdisc has already been reset by qdisc_purge_queue() inside sch tree lock critical section. Fixes: c266f64d ("net: sched: protect block state with mutex") Signed-off-by:
-
Ka-Cheong Poon authored
In rds_bind(), laddr_check is called without checking if it is NULL or not. And rs_transport should be reset if rds_add_bound() fails. Fixes: c5c1a030 ("net/rds: An rds_sock is added too early to the hash table") Reported-by: syzbot+fae39afd2101a17ec624@syzkaller.appspotmail.com Signed-off-by:
Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: provide correct skb->priority SO_PRIORITY socket option requests TCP egress packets to contain a user provided value. TCP manages to send most packets with the requested values, notably for TCP_ESTABLISHED state, but fails to do so for few packets. These packets are control packets sent on behalf of SYN_RECV or TIME_WAIT states. Note that to test this with packetdrill, it is a bit of a hassle, since packetdrill can not verify priority of egress packets, other than indirect observations, using for example sch_prio on its tunnel device. The bad skb priorities cause problems for GCP, as this field is one of the keys used in routing. ==================== Signed-off-by: -
Eric Dumazet authored
ctl packets sent on behalf of TIME_WAIT sockets currently have a zero skb->priority, which can cause various problems. In this patch we : - add a tw_priority field in struct inet_timewait_sock. - populate it from sk->sk_priority when a TIME_WAIT is created. - For IPv4, change ip_send_unicast_reply() and its two callers to propagate tw_priority correctly. ip_send_unicast_reply() no longer changes sk->sk_priority. - For IPv6, make sure TIME_WAIT sockets pass their tw_priority field to tcp_v6_send_response() and tcp_v6_send_ack(). Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
We can populate skb->priority for some ctl packets instead of always using zero. Signed-off-by:
-
Eric Dumazet authored
Currently, ip6_xmit() sets skb->priority based on sk->sk_priority This is not desirable for TCP since TCP shares the same ctl socket for a given netns. We want to be able to send RST or ACK packets with a non zero skb->priority. This patch has no functional change. Signed-off-by:
-
Allan Zhang authored
BPF_PROG_TYPE_SOCK_OPS program can reenter bpf_event_output because it can be called from atomic and non-atomic contexts since we don't have bpf_prog_active to prevent it happen. This patch enables 3 levels of nesting to support normal, irq and nmi context. We can easily reproduce the issue by running netperf crr mode with 100 flows and 10 threads from netperf client side. Here is the whole stack dump: [ 515.228898] WARNING: CPU: 20 PID: 14686 at kernel/trace/bpf_trace.c:549 bpf_event_output+0x1f9/0x220 [ 515.228903] CPU: 20 PID: 14686 Comm: tcp_crr Tainted: G W 4.15.0-smp-fixpanic #44 [ 515.228904] Hardware name: Intel TBG,ICH10/Ikaria_QC_1b, BIOS 1.22.0 06/04/2018 [ 515.228905] RIP: 0010:bpf_event_output+0x1f9/0x220 [ 515.228906] RSP: 0018:ffff9a57ffc03938 EFLAGS: 00010246 [ 515.228907] RAX: 0000000000000012 RBX: 0000000000000001 RCX: 0000000000000000 [ 515.228907] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff836b0f80 [ 515.228908] RBP: ffff9a57ffc039c8 R08: 0000000000000004 R09: 0000000000000012 [ 515.228908] R10: ffff9a57ffc1de40 R11: 0000000000000000 R12: 0000000000000002 [ 515.228909] R13: ffff9a57e13bae00 R14: 00000000ffffffff R15: ffff9a57ffc1e2c0 [ 515.228910] FS: 00007f5a3e6ec700(0000) GS:ffff9a57ffc00000(0000) knlGS:0000000000000000 [ 515.228910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 515.228911] CR2: 0000537082664fff CR3: 000000061fed6002 CR4: 00000000000226f0 [ 515.228911] Call Trace: [ 515.228913] <IRQ> [ 515.228919] [<ffffffff82c6c6cb>] bpf_sockopt_event_output+0x3b/0x50 [ 515.228923] [<ffffffff8265daee>] ? bpf_ktime_get_ns+0xe/0x10 [ 515.228927] [<ffffffff8266fda5>] ? __cgroup_bpf_run_filter_sock_ops+0x85/0x100 [ 515.228930] [<ffffffff82cf90a5>] ? tcp_init_transfer+0x125/0x150 [ 515.228933] [<ffffffff82cf9159>] ? tcp_finish_connect+0x89/0x110 [ 515.228936] [<ffffffff82cf98e4>] ? tcp_rcv_state_process+0x704/0x1010 [ 515.228939] [<ffffffff82c6e263>] ? sk_filter_trim_cap+0x53/0x2a0 [ 515.228942] [<ffffffff82d90d1f>] ? tcp_v6_inbound_md5_hash+0x6f/0x1d0 [ 515.228945] [<ffffffff82d92160>] ? tcp_v6_do_rcv+0x1c0/0x460 [ 515.228947] [<ffffffff82d93558>] ? tcp_v6_rcv+0x9f8/0xb30 [ 515.228951] [<ffffffff82d737c0>] ? ip6_route_input+0x190/0x220 [ 515.228955] [<ffffffff82d5f7ad>] ? ip6_protocol_deliver_rcu+0x6d/0x450 [ 515.228958] [<ffffffff82d60246>] ? ip6_rcv_finish+0xb6/0x170 [ 515.228961] [<ffffffff82d5fb90>] ? ip6_protocol_deliver_rcu+0x450/0x450 [ 515.228963] [<ffffffff82d60361>] ? ipv6_rcv+0x61/0xe0 [ 515.228966] [<ffffffff82d60190>] ? ipv6_list_rcv+0x330/0x330 [ 515.228969] [<ffffffff82c4976b>] ? __netif_receive_skb_one_core+0x5b/0xa0 [ 515.228972] [<ffffffff82c497d1>] ? __netif_receive_skb+0x21/0x70 [ 515.228975] [<ffffffff82c4a8d2>] ? process_backlog+0xb2/0x150 [ 515.228978] [<ffffffff82c4aadf>] ? net_rx_action+0x16f/0x410 [ 515.228982] [<ffffffff830000dd>] ? __do_softirq+0xdd/0x305 [ 515.228986] [<ffffffff8252cfdc>] ? irq_exit+0x9c/0xb0 [ 515.228989] [<ffffffff82e02de5>] ? smp_call_function_single_interrupt+0x65/0x120 [ 515.228991] [<ffffffff82e020e1>] ? call_function_single_interrupt+0x81/0x90 [ 515.228992] </IRQ> [ 515.228996] [<ffffffff82a11ff0>] ? io_serial_in+0x20/0x20 [ 515.229000] [<ffffffff8259c040>] ? console_unlock+0x230/0x490 [ 515.229003] [<ffffffff8259cbaa>] ? vprintk_emit+0x26a/0x2a0 [ 515.229006] [<ffffffff8259cbff>] ? vprintk_default+0x1f/0x30 [ 515.229008] [<ffffffff8259d9f5>] ? vprintk_func+0x35/0x70 [ 515.229011] [<ffffffff8259d4bb>] ? printk+0x50/0x66 [ 515.229013] [<ffffffff82637637>] ? bpf_event_output+0xb7/0x220 [ 515.229016] [<ffffffff82c6c6cb>] ? bpf_sockopt_event_output+0x3b/0x50 [ 515.229019] [<ffffffff8265daee>] ? bpf_ktime_get_ns+0xe/0x10 [ 515.229023] [<ffffffff82c29e87>] ? release_sock+0x97/0xb0 [ 515.229026] [<ffffffff82ce9d6a>] ? tcp_recvmsg+0x31a/0xda0 [ 515.229029] [<ffffffff8266fda5>] ? __cgroup_bpf_run_filter_sock_ops+0x85/0x100 [ 515.229032] [<ffffffff82ce77c1>] ? tcp_set_state+0x191/0x1b0 [ 515.229035] [<ffffffff82ced10e>] ? tcp_disconnect+0x2e/0x600 [ 515.229038] [<ffffffff82cecbbb>] ? tcp_close+0x3eb/0x460 [ 515.229040] [<ffffffff82d21082>] ? inet_release+0x42/0x70 [ 515.229043] [<ffffffff82d58809>] ? inet6_release+0x39/0x50 [ 515.229046] [<ffffffff82c1f32d>] ? __sock_release+0x4d/0xd0 [ 515.229049] [<ffffffff82c1f3e5>] ? sock_close+0x15/0x20 [ 515.229052] [<ffffffff8273b517>] ? __fput+0xe7/0x1f0 [ 515.229055] [<ffffffff8273b66e>] ? ____fput+0xe/0x10 [ 515.229058] [<ffffffff82547bf2>] ? task_work_run+0x82/0xb0 [ 515.229061] [<ffffffff824086df>] ? exit_to_usermode_loop+0x7e/0x11f [ 515.229064] [<ffffffff82408171>] ? do_syscall_64+0x111/0x130 [ 515.229067] [<ffffffff82e0007c>] ? entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: a5a3a828 ("bpf: add perf event notificaton support for sock_ops") Signed-off-by:
Allan Zhang <allanzhang@google.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Stanislav Fomichev <sdf@google.com> Reviewed-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20190925234312.94063-2-allanzhang@google.com
-
Andrew Lunn authored
The CPU port does not have a PHY connected to it. So calling phy_support_asym_pause() results in an Opps. As with other DSA drivers, add a guard that the port is a user port. Reported-by:
Michal Vokáč <michal.vokac@ysoft.com> Fixes: 0394a63a ("net: dsa: enable and disable all ports") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
-
Eric Dumazet authored
qdisc_root() use from netem_enqueue() triggers a lockdep warning. __dev_queue_xmit() uses rcu_read_lock_bh() which is not equivalent to rcu_read_lock() + local_bh_disable_bh as far as lockdep is concerned. WARNING: suspicious RCU usage 5.3.0-rc7+ #0 Not tainted ----------------------------- include/net/sch_generic.h:492 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by syz-executor427/8855: #0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: lwtunnel_xmit_redirect include/net/lwtunnel.h:92 [inline] #0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x2dc/0x2570 net/ipv4/ip_output.c:214 #1: 00000000b5525c01 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x20a/0x3650 net/core/dev.c:3804 #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: spin_lock include/linux/spinlock.h:338 [inline] #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_xmit_skb net/core/dev.c:3502 [inline] #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_queue_xmit+0x14b8/0x3650 net/core/dev.c:3838 stack backtrace: CPU: 0 PID: 8855 Comm: syz-executor427 Not tainted 5.3.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5357 qdisc_root include/net/sch_generic.h:492 [inline] netem_enqueue+0x1cfb/0x2d80 net/sched/sch_netem.c:479 __dev_xmit_skb net/core/dev.c:3527 [inline] __dev_queue_xmit+0x15d2/0x3650 net/core/dev.c:3838 dev_queue_xmit+0x18/0x20 net/core/dev.c:3902 neigh_hh_output include/net/neighbour.h:500 [inline] neigh_output include/net/neighbour.h:509 [inline] ip_finish_output2+0x1726/0x2570 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x5fc/0xb90 net/ipv4/ip_output.c:290 ip_finish_output+0x38/0x1f0 net/ipv4/ip_output.c:318 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip_mc_output+0x292/0xf40 net/ipv4/ip_output.c:417 dst_output include/net/dst.h:436 [inline] ip_local_out+0xbb/0x190 net/ipv4/ip_output.c:125 ip_send_skb+0x42/0xf0 net/ipv4/ip_output.c:1555 udp_send_skb.isra.0+0x6b2/0x1160 net/ipv4/udp.c:887 udp_sendmsg+0x1e96/0x2820 net/ipv4/udp.c:1174 inet_sendmsg+0x9e/0xe0 net/ipv4/af_inet.c:807 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
After commit a2c11b03 ("kcm: use BPF_PROG_RUN") syzbot easily triggers the warning in cant_sleep(). As explained in commit 6cab5e90 ("bpf: run bpf programs with preemption disabled") we need to disable preemption before running bpf programs. BUG: assuming atomic context at net/kcm/kcmsock.c:382 in_atomic(): 0, irqs_disabled(): 0, pid: 7, name: kworker/u4:0 3 locks held by kworker/u4:0/7: #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: __write_once_size include/linux/compiler.h:226 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: atomic64_set include/asm-generic/atomic-instrumented.h:855 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: atomic_long_set include/asm-generic/atomic-long.h:40 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: set_work_data kernel/workqueue.c:620 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: set_work_pool_and_clear_pending kernel/workqueue.c:647 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: process_one_work+0x88b/0x1740 kernel/workqueue.c:2240 #1: ffff8880a989fdc0 ((work_completion)(&strp->work)){+.+.}, at: process_one_work+0x8c1/0x1740 kernel/workqueue.c:2244 #2: ffff888098998d10 (sk_lock-AF_INET){+.+.}, at: lock_sock include/net/sock.h:1522 [inline] #2: ffff888098998d10 (sk_lock-AF_INET){+.+.}, at: strp_sock_lock+0x2e/0x40 net/strparser/strparser.c:440 CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: kstrp strp_work Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 __cant_sleep kernel/sched/core.c:6826 [inline] __cant_sleep.cold+0xa4/0xbc kernel/sched/core.c:6803 kcm_parse_func_strparser+0x54/0x200 net/kcm/kcmsock.c:382 __strp_recv+0x5dc/0x1b20 net/strparser/strparser.c:221 strp_recv+0xcf/0x10b net/strparser/strparser.c:343 tcp_read_sock+0x285/0xa00 net/ipv4/tcp.c:1639 strp_read_sock+0x14d/0x200 net/strparser/strparser.c:366 do_strp_work net/strparser/strparser.c:414 [inline] strp_work+0xe3/0x130 net/strparser/strparser.c:423 process_one_work+0x9af/0x1740 kernel/workqueue.c:2269 Fixes: a2c11b03 ("kcm: use BPF_PROG_RUN") Fixes: 6cab5e90 ("bpf: run bpf programs with preemption disabled") Signed-off-by:
-
Dan Carpenter authored
The "gmac->phy_mode" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling will never be triggered. Fixes: b1c17215 ("stmmac: add ipq806x glue layer") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The "priv->phy_mode" is an enum and in this context GCC will treat it as an unsigned int so it can never be less than zero. Fixes: 492caffa ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Signed-off-by:
-
Dan Carpenter authored
The "iface" variable is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: b7862412 ("of_mdio: Abstract a general interface for phy connect") Signed-off-by:
-
Dan Carpenter authored
The "lp->phy_mode" is an enum but in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: ee06b172 ("net: axienet: add support for standard phy-mode binding") Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by:
-
Dan Carpenter authored
The "dwmac->phy_mode" is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: 566e8251 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Dan Carpenter authored
The "phy_mode" variable is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: 4c270b55 ("net: ethernet: socionext: add AVE ethernet driver") Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by:
-
Dan Carpenter authored
The "priv->if_mode" is type phy_interface_t which is an enum. In this context GCC will treat the enum as an unsigned int so this error handling is never triggered. Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by:
-
Dan Carpenter authored
The "priv->phy_interface" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling is never triggered. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by:
-
Dan Carpenter authored
The "priv->phy_interface" variable is an enum and in this context GCC will treat it as unsigned so the error handling will never be triggered. Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Dan Carpenter authored
The "priv->phy_mode" variable is an enum and in this context GCC will treat it as unsigned to the error handling will never trigger. Fixes: 57c5bc9a ("net: hisilicon: add hix5hd2 mac driver") Signed-off-by:
-
Dan Carpenter authored
The "chip" variable is an enum, and it's treated as unsigned int by GCC in this context so the error handling isn't triggered. Fixes: e8d45292 ("cxgb4: clean up init_one") Signed-off-by:
-
Dan Carpenter authored
The irqreturn_t type is an enum or an unsigned int in GCC. That creates to problems because it can't detect if the self->aq_hw_ops->hw_irq_read() call fails and at the end the function always returns IRQ_HANDLED. drivers/net/ethernet/aquantia/atlantic/aq_vec.c:316 aq_vec_isr_legacy() warn: unsigned 'err' is never less than zero. drivers/net/ethernet/aquantia/atlantic/aq_vec.c:329 aq_vec_isr_legacy() warn: always true condition '(err >= 0) => (0-u32max >= 0)' Fixes: 970a2e98 ("net: ethernet: aquantia: Vector operations") Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
Uwe Kleine-König authored
According to Tal Gilboa the only benefit from DIM comes from a driver that uses it. So it doesn't make sense to make this symbol user visible, instead all drivers that use it should select it (as is already the case AFAICT). Signed-off-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
- 26 Sep, 2019 9 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2019-09-26' of https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.4 First set of fixes for 5.4 sent during the merge window. Most are regressions fixes but the mt7615 problem has been since it was merged. iwlwifi * fix a build regression related CONFIG_THERMAL * avoid using GEO_TX_POWER_LIMIT command on certain firmware versions rtw88 * fixes for skb leaks zd1211rw * fix a compiler warning on 32 bit mt76 * fix the firmware paths for mt7615 to match with linux-firmware wil6210 * fix use of skb after free ==================== Signed-off-by:
-
Colin Ian King authored
There is a statement that is indented one level too deeply, remove the extraneous tab. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Andrii Nakryiko authored
BTF-to-C converter previously skipped anonymous enums in an assumption that those are embedded in struct's field definitions. This is not always the case and a lot of kernel constants are defined as part of anonymous enums. This change fixes the logic by eagerly marking all types as either referenced by any other type or not. This is enough to distinguish two classes of anonymous enums and emit previously omitted enum definitions. Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
-
Jason A. Donenfeld authored
Commit 7d9e5f42 removed references from certain dsts, but accounting for this never translated down into the fib6 suppression code. This bug was triggered by WireGuard users who use wg-quick(8), which uses the "suppress-prefix" directive to ip-rule(8) for routing all of their internet traffic without routing loops. The test case added here causes the reference underflow by causing packets to evaluate a suppress rule. Fixes: 7d9e5f42 ("ipv6: convert major tx path to use RT6_LOOKUP_F_DST_NOREF") Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Acked-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
Li RongQing authored
userspace openvswitch patch "(dpif-linux: Implement the API functions to allow multiple handler threads read upcall)" changes its type from U32 to UNSPEC, but leave the kernel unchanged and after kernel 6e237d09 "(netlink: Relax attr validation for fixed length types)", this bug is exposed by the below warning [ 57.215841] netlink: 'ovs-vswitchd': attribute type 5 has an invalid length. Fixes: 5cd667b0 ("openvswitch: Allow each vport to have an array of 'port_id's") Signed-off-by:
Li RongQing <lirongqing@baidu.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Biju Das authored
Document RZ/G2N (R8A774B1) SoC bindings. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Thierry Reding authored
The size of individual pages in the page pool in given by an order. The order is the binary logarithm of the number of pages that make up one of the pages in the pool. However, the driver currently passes the number of pages rather than the order, so it ends up wasting quite a bit of memory. Fix this by taking the binary logarithm and passing that in the order field. Fixes: 2af6106a ("net: stmmac: Introducing support for Page Pool") Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Xin Long authored
Fei Liu reported a crash when doing netperf on a topo of macsec dev over veth: [ 448.919128] refcount_t: underflow; use-after-free. [ 449.090460] Call trace: [ 449.092895] refcount_sub_and_test+0xb4/0xc0 [ 449.097155] tcp_wfree+0x2c/0x150 [ 449.100460] ip_rcv+0x1d4/0x3a8 [ 449.103591] __netif_receive_skb_core+0x554/0xae0 [ 449.108282] __netif_receive_skb+0x28/0x78 [ 449.112366] netif_receive_skb_internal+0x54/0x100 [ 449.117144] napi_gro_complete+0x70/0xc0 [ 449.121054] napi_gro_flush+0x6c/0x90 [ 449.124703] napi_complete_done+0x50/0x130 [ 449.128788] gro_cell_poll+0x8c/0xa8 [ 449.132351] net_rx_action+0x16c/0x3f8 [ 449.136088] __do_softirq+0x128/0x320 The issue was caused by skb's true_size changed without its sk's sk_wmem_alloc increased in tcp/skb_gro_receive(). Later when the skb is being freed and the skb's truesize is subtracted from its sk's sk_wmem_alloc in tcp_wfree(), underflow occurs. macsec is calling gro_cells_receive() to receive a packet, which actually requires skb->sk to be NULL. However when macsec dev is over veth, it's possible the skb->sk is still set if the skb was not unshared or expanded from the peer veth. ip_rcv() is calling skb_orphan() to drop the skb's sk for tproxy, but it is too late for macsec's calling gro_cells_receive(). So fix it by dropping the skb's sk earlier on rx path of macsec. Fixes: 5491e7c6 ("macsec: enable GRO and RPS on macsec devices") Reported-by:
Xiumei Mu <xmu@redhat.com> Reported-by:
Fei Liu <feliu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-09-24 This series introduces some fixes to mlx5 driver. For more information please see tag log below. Please pull and let me know if there is any problem. For -stable v4.20: ('net/mlx5e: Fix traffic duplication in ethtool steering') For -stable v4.19: ('net/mlx5: Add device ID of upcoming BlueField-2') For -stable v5.3: ('net/mlx5e: Fix matching on tunnel addresses type') ==================== Signed-off-by:
-
