When the MPC initialization code discovers the HW-specific max MTU,
apply the resulting changes straight to the netdevice.

If this is the device's first initialization, also set its MTU
(HiperSockets: the max MTU; else: a layer-specific default value).
Then cap the current MTU by the new max MTU.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The netdevice is always available now, so get the portno from there.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allocation of the netdevice is currently delayed until a qeth card first
goes online. This complicates matters in several places, where we need
to cache values instead of applying them straight to the netdevice.

Improve on this by moving the allocation up to where the qeth card
itself is created. This is also one step in direction of eventually
placing the qeth card into netdev_priv().

In all subsequent code, remove the now redundant checks whether
card->dev is valid.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netif_carrier_off() does its own checking.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the subdriver's remove() routine has completed, the card's layer
mode is undetermined again. Reflect this in the layer2 field.

If qeth_dev_layer2_store() hits an error after remove() was called, the
card _always_ requires a setup(), even if the previous layer mode is
requested again.
But qeth_dev_layer2_store() bails out early if the requested layer mode
still matches the current one. So unless we reset the layer2 field,
re-probing the card back to its previous mode is currently not possible.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

By updating q->used_buffers only _after_ do_QDIO() has completed, there
is a potential race against the buffer's TX completion. In the unlikely
case that the TX completion path wins, qeth_qdio_output_handler() would
decrement the counter before qeth_flush_buffers() even incremented it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Salil Mehta says:

====================
Misc. cleanups for HNS3 ethernet driver

This patch-set presents some cleanups for HNS3 Ethernet Driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the SPDX identifiers to HNS3 PF driver.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The struct hclge_desc_cb and hclge_desc_cb are never used in
anywhere. This patch removes them.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The input parameter "dev" of hns3_irq_handle() is indeed
used as a tqp vector, it is misleadin.

The struct member "flag" is used to indicate ring type,
so rename it.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use BIT() and GENMASK() to convert the bit mask, modify
the inconsistent ones, and remove useless ones.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using hex for bit offsets is inconsistent with the rest
of the file. Change them to decimal.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes some comment spelling errors, removes
redundant comments, rewrites misleading comments, and
adds some necessary comments.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove extra space and brackets.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Apply the standard minor cleanup by returning ret outside
the brackets.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove some redundant assignments, because they have
been set to zero when allocate hdev.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-07-20

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add sharing of BPF objects within one ASIC: this allows for reuse of
   the same program on multiple ports of a device, and therefore gains
   better code store utilization. On top of that, this now also enables
   sharing of maps between programs attached to different ports of a
   device, from Jakub.

2) Cleanup in libbpf and bpftool's Makefile to reduce unneeded feature
   detections and unused variable exports, also from Jakub.

3) First batch of RCU annotation fixes in prog array handling, i.e.
   there are several __rcu markers which are not correct as well as
   some of the RCU handling, from Roman.

4) Two fixes in BPF sample files related to checking of the prog_cnt
   upper limit from sample loader, from Dan.

5) Minor cleanup in sockmap to remove a set but not used variable,
   from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Tyler Hicks says:

====================
Make /sys/class/net per net namespace objects belong to container

This is a revival of an older patch set from Dmitry Torokhov:

 https://lore.kernel.org/lkml/1471386795-32918-1-git-send-email-dmitry.torokhov@gmail.com/

My submission of v2 is here:

 https://lore.kernel.org/lkml/1531497949-1766-1-git-send-email-tyhicks@canonical.com/

Here's Dmitry's description:

 There are objects in /sys hierarchy (/sys/class/net/) that logically
 belong to a namespace/container. Unfortunately all sysfs objects start
 their life belonging to global root, and while we could change
 ownership manually, keeping tracks of all objects that come and go is
 cumbersome. It would be better if kernel created them using correct
 uid/gid from the beginning.

 This series changes kernfs to allow creating object's with arbitrary
 uid/gid, adds get_ownership() callback to ktype structure so subsystems
 could supply their own logic (likely tied to namespace support) for
 determining ownership of kobjects, and adjusts sysfs code to make use
 of this information. Lastly net-sysfs is adjusted to make sure that
 objects in net namespace are owned by the root user from the owning
 user namespace.

 Note that we do not adjust ownership of objects moved into a new
 namespace (as when moving a network device into a container) as
 userspace can easily do it.

I'm reviving this patch set because we would like this feature for
system containers. One specific use case that we have is that libvirt is
unable to configure its bridge device inside of a system container due
to the bridge files in /sys/class/net/ being owned by init root instead
of container root. The last two patches in this set are patches that
I've added to Dmitry's original set to allow such configuration of the
bridge device.

Eric had previously provided feedback that he didn't favor these changes
affecting all layers of the stack and that most of the changes could
remain local to drivers/base/core.c. That feedback is certainly sensible
but I wanted to send out v2 of the patch set without making that large
of a change since quite a bit of time has passed and the bridge changes
in the last patch of this set shows that not all of the changes will be
local to drivers/base/core.c. I'm happy to make the changes if the
original request still stands.

* Changes since v2:
  - Added my Co-Developed-by and Signed-off-by tags to all of Dmitry's
    patches that I've modified
  - Patch 1 received build failure fixes in
    arch/x86/kernel/cpu/intel_rdt_rdtgroup.c
  - Patch 2 was updated to drop the declaration of sysfs_add_file() from
    sysfs.h since the patch removed all other uses of the function
  - Patch 5 is a new patch that prevents tx_maxrate from being written
    to from inside of a container
    + Maybe I'm being too cautious here but the restriction can always
      be loosened up later
  - Patches 6 and 7 were updated to make net_ns_get_ownership() always
    initialize uid and gid, even when the network namespace is NULL, so
    that it isn't a dangerous function to reuse
    + Requested by Christian Brauner
  - I've looked at all sysfs attributes affected by this patch set and
    feel comfortable about the changes. There are quite a few affected
    attributes that don't have any capable()/ns_capable() checks in
    their store operations (per_bond_attrs, at91_sysfs_attrs,
    sysfs_grcan_attrs, ican3_sysfs_attrs, cdc_ncm_sysfs_attrs,
    qmi_wwan_sysfs_attrs) but I think this is acceptable. It means that
    container root, rather than specifically CAP_NET_ADMIN inside of the
    network namespace that the device belongs to, can write to those
    device attributes. It's the same situation that those devices have
    today in that init root is able to write to the attributes without
    necessarily having CAP_NET_ADMIN. I think that this should probably
    be fixed in order to be consistent with what netdev_store() does by
    verifying CAP_NET_ADMIN in the network namespace but that it doesn't
    need to happen in this patch set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When creating various bridge objects in /sys/class/net/... make sure
that they belong to the container's owner instead of global root (if
they belong to a container/namespace).
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make net_ns_get_ownership() reusable by networking code outside of core.
This is useful, for example, to allow bridge related sysfs files to be
owned by container root.

Add a function comment since this is a potentially dangerous function to
use given the way that kobject_get_ownership() works by initializing uid
and gid before calling .get_ownership().
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When creating various objects in /sys/class/net/... make sure that they
belong to container's owner instead of global root (if they belong to a
container/namespace).
Co-Developed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An upcoming change will allow container root to open some /sys/class/net
files for writing. The tx_maxrate attribute can result in changes
to actual hardware devices so err on the side of caution by requiring
CAP_NET_ADMIN in the init namespace in the corresponding attribute store
operation.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Plumb in get_ownership() callback for devices belonging to a class so that
they can be created with uid/gid different from global root. This will
allow network devices in a container to belong to container's root and not
global root.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change implements get_ownership() for ksets created with
kset_create_and_add() call by fetching ownership data from parent kobject.
This is done mostly for benefit of "queues" attribute of net devices so
that corresponding directory belongs to container's root instead of global
root for network devices in a container.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Normally kobjects and their sysfs representation belong to global root,
however it is not necessarily the case for objects in separate namespaces.
For example, objects in separate network namespace logically belong to the
container's root and not global root.

This change lays groundwork for allowing network namespace objects
ownership to be transferred to container's root user by defining
get_ownership() callback in ktype structure and using it in sysfs code to
retrieve desired uid/gid when creating sysfs objects for given kobject.
Co-Developed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change allows creating kernfs files and directories with arbitrary
uid/gid instead of always using GLOBAL_ROOT_UID/GID by extending
kernfs_create_dir_ns() and kernfs_create_file_ns() with uid/gid arguments.
The "simple" kernfs_create_file() and kernfs_create_dir() are left alone
and always create objects belonging to the global root.

When creating symlinks ownership (uid/gid) is taken from the target kernfs
object.
Co-Developed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Based upon a patch by Sean Tranchetti.

Fixes: d4546c25 ("net: Convert GRO SKB handling to list_head.")
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for your net-next
tree:

1) No need to set ttl from reject action for the bridge family, from
   Taehee Yoo.

2) Use a fixed timeout for flow that are passed up from the flowtable
   to conntrack, from Florian Westphal.

3) More preparation patches for tproxy support for nf_tables, from Mate
   Eckl.

4) Remove unnecessary indirection in core IPv6 checksum function, from
   Florian Westphal.

5) Use nf_ct_get_tuplepr() from openvswitch, instead of opencoding it.
   From Florian Westphal.

6) socket match now selects socket infrastructure, instead of depending
   on it. From Mate Eckl.

7) Patch series to simplify conntrack tuple building/parsing from packet
   path and ctnetlink, from Florian Westphal.

8) Fetch timeout policy from protocol helpers, instead of doing it from
   core, from Florian Westphal.

9) Merge IPv4 and IPv6 protocol trackers into conntrack core, from
   Florian Westphal.

10) Depend on CONFIG_NF_TABLES_IPV6 and CONFIG_IP6_NF_IPTABLES
    respectively, instead of IPV6. Patch from Mate Eckl.

11) Add specific function for garbage collection in conncount,
    from Yi-Hung Wei.

12) Catch number of elements in the connlimit list, from Yi-Hung Wei.

13) Move locking to nf_conncount, from Yi-Hung Wei.

14) Series of patches to add lockless tree traversal in nf_conncount,
    from Yi-Hung Wei.

15) Resolve clash in matching conntracks when race happens, from
    Martynas Pumputis.

16) If connection entry times out, remove template entry from the
    ip_vs_conn_tab table to improve behaviour under flood, from
    Julian Anastasov.

17) Remove useless parameter from nf_ct_helper_ext_add(), from Gao feng.

18) Call abort from 2-phase commit protocol before requesting modules,
    make sure this is done under the mutex, from Florian Westphal.

19) Grab module reference when starting transaction, also from Florian.

20) Dynamically allocate expression info array for pre-parsing, from
    Florian.

21) Add per netns mutex for nf_tables, from Florian Westphal.

22) A couple of patches to simplify and refactor nf_osf code to prepare
    for nft_osf support.

23) Break evaluation on missing socket, from Mate Eckl.

24) Allow to match socket mark from nft_socket, from Mate Eckl.

25) Remove dependency on nf_defrag_ipv6, now that IPv6 tracker is
    built-in into nf_conntrack. From Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

All conflicts were trivial overlapping changes, so reasonably
easy to resolve.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull VFIO fix from Alex Williamson:
 "Harden potential Spectre v1 issue (Gustavo A. R. Silva)"

* tag 'vfio-v4.18-rc6' of git://github.com/awilliam/linux-vfio:
  vfio/pci: Fix potential Spectre v1

Merge tag 'for-4.18/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fix from Mike Snitzer:
 "Fix DM writecache target to allow an optional offset to the start of
  the data and metadata area.

  This allows userspace tools (e.g. LVM2) to place a header and metadata
  at the front of the writecache device for its use"

* tag 'for-4.18/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm writecache: support optional offset for start of device

The commit referred to below introduced an update of the link
capabilities field that is not safe. Given the recently added
feature to remove idle node and link items after 5 minutes, there
is a small risk that the update will happen at the very moment the
targeted link is being removed. To avoid this we have to perform
the update inside the node item's write lock protection.

Fixes: 9012de50 ("tipc: add sequence number check for link STATE messages")
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stephen Hemminger says:

====================
constify nla_policy

Almost all places that use nla_policy declare it const.
A couple of drivers didn't but that is fixable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The netlink policy structure can be constant like other
drivers.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The netlink policy should be const like other drivers.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

It seems that the proper structure to use in this particular
case is *skb_iter* instead of skb.

Addresses-Coverity-ID: 1471906 ("Copy-paste error")
Fixes: 4799ac81 ("tls: Add rx inline crypto offload")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull SCSI fixes from James Bottomley:
 "A set of 8 obvious fixes.

  Three (2 qla2xxx and the cxlflash oopses) are regressions, two from
  4.17 and one from the merge window. The hpsa change is user visible,
  but it fixes an error users have complained about"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: cxlflash: fix assignment of the backend operations
  scsi: qedi: Send driver state to MFW
  scsi: qedf: Send the driver state to MFW
  scsi: hpsa: correct enclosure sas address
  scsi: sd_zbc: Fix variable type and bogus comment
  scsi: qla2xxx: Fix NULL pointer dereference for fcport search
  scsi: qla2xxx: Fix kernel crash due to late workqueue allocation
  scsi: qla2xxx: Fix inconsistent DMA mem alloc/free

Pull IOMMU fix from Joerg Roedel:
 "Only one revert, for an an Intel VT-d patch that caused issues with
  the i915 GPU driver"

* tag 'iommu-fixes-v4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  Revert "iommu/vt-d: Clean up pasid quirk for pre-production devices"

Pull x86 platform driver fixes from Andy Shevchenko:
 "The Dell laptop ACPI video brightness control is now back after fixing
  a regression brought by SMM refactoring"

* tag 'platform-drivers-x86-v4.18-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: dell-laptop: Fix backlight detection

Pull ARC fixes from Vineet Gupta:
 "ARC is back after radio silence in 4.17:

   - Fix CONFIG_SWAP [Alexey]

   - Robustify cmpxchg emulation for systems w/o atomics [Alexey /
     PeterZ]

   - Allow mprotext(PROT_EXEC) for stack mappings [Vineet]

   - HSDK platform enable PCIe, APG GPIO [Gustavo]

   - miscll other fixes, config updates etc"

* tag 'arc-4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARCv2: [plat-hsdk]: Save accl reg pair by default
  ARC: mm: allow mprotect to make stack mappings executable
  ARC: Fix CONFIG_SWAP
  ARC: [arcompact] entry.S: minor code movement
  ARC: configs: Remove CONFIG_INITRAMFS_SOURCE from defconfigs
  ARC: configs: remove no longer needed CONFIG_DEVPTS_MULTIPLE_INSTANCES
  ARC: Improve cmpxchg syscall implementation
  ARC: [plat-hsdk]: Configure APB GPIO controller on ARC HSDK platform
  ARC: [plat-hsdk] Add PCIe support
  ARC: Enable machine_desc->init_per_cpu for !CONFIG_SMP
  ARC: Explicitly add -mmedium-calls to CFLAGS