- 12 Jun, 2023 5 commits
-
-
Kashyap Desai authored
Use jiffies based timewait instead of counting iteration for commands that block for FW response. Also add a poll routine for control path commands. This is for polling completion if the waiting commands timeout. This avoids cases where the driver misses completion interrupts. Signed-off-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-6-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
Leon Romanovsky <leon@kernel.org>
-
Kashyap Desai authored
There is no need of setting max command queue entries based on firmware version check. Removing deperecated code. Signed-off-by:
-
Kashyap Desai authored
There is a common FW communication offset for both PF and VF. Removed code around virt_fn check while creating FW channel. Signed-off-by:
-
Kashyap Desai authored
bnxt_qplib_service_creq can be called from interrupt or tasklet or process context. So the function take irq variant of spin_lock. But when wake_up is invoked with the lock held, it is putting the calling context to sleep. [exception RIP: __wake_up_common+190] RIP: ffffffffb7539d7e RSP: ffffa73300207ad8 RFLAGS: 00000083 RAX: 0000000000000001 RBX: ffff91fa295f69b8 RCX: dead000000000200 RDX: ffffa733344af940 RSI: ffffa73336527940 RDI: ffffa73336527940 RBP: 000000000000001c R8: 0000000000000002 R9: 00000000000299c0 R10: 0000017230de82c5 R11: 0000000000000002 R12: ffffa73300207b28 R13: 0000000000000000 R14: ffffa733341bf928 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Call the wakeup after releasing the lock. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by:
-
Kashyap Desai authored
Driver is not handling the wraparound of the mbox producer index correctly. Currently the wraparound happens once u32 max is reached. Bit 31 of the producer index register is special and should be set only once for the first command. Because the producer index overflow setting bit31 after a long time, FW goes to initialization sequence and this causes FW hang. Fix is to wraparound the mbox producer index once it reaches u16 max. Fixes: cee0c7bb ("RDMA/bnxt_re: Refactor command queue management code") Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by:
-
- 11 Jun, 2023 8 commits
-
-
Cheng Xu authored
The original doorbell allocation mechanism is complex and does not meet the isolation requirement. So we introduce a new doorbell mechanism and the original mechanism (only be used with CAP_SYS_RAWIO if hardware does not support the new mechanism) needs to be kept as simple as possible for compatibility. Signed-off-by:
Cheng Xu <chengyou@linux.alibaba.com> Link: https://lore.kernel.org/r/20230606055005.80729-5-chengyou@linux.alibaba.comSigned-off-by:
-
Cheng Xu authored
For the isolation requirement, each QP/CQ can only issue doorbells from the allocated mmio space. Configure the relationship between QPs/CQs and mmio doorbell spaces to hardware in create_qp/create_cq interfaces. Signed-off-by:
-
Cheng Xu authored
Each ucontext will try to allocate doorbell resources in the extended bar space from hardware. For compatibility, we change nothing for the original bar space, and it will be used only for applications with CAP_SYS_RAWIO authority in the older HW/FW environments. Signed-off-by:
-
Cheng Xu authored
Add a new CMDQ message to configure hardware. Initially the page size (in the format of shift) will be passed to hardware, so that hardware can organize the mmio space properly. It's called only if hardware supports it. Signed-off-by:
-
Patrisious Haddad authored
Previously when destroying a QP/RQ, the result of the firmware destruction function was ignored and upper layers weren't informed about the failure. Which in turn could lead to various problems since when upper layer isn't aware of the failure it continues its operation thinking that the related QP/RQ was successfully destroyed while it actually wasn't, which could lead to the below kernel WARN. Currently, we return the correct firmware destruction status to upper layers which in case of the RQ would be mlx5_ib_destroy_wq() which was already capable of handling RQ destruction failure or in case of a QP to destroy_qp_common(), which now would actually warn upon qp destruction failure. WARNING: CPU: 3 PID: 995 at drivers/infiniband/core/rdma_core.c:940 uverbs_destroy_ufile_hw+0xcb/0xe0 [ib_uverbs] Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core overlay mlx5_core fuse CPU: 3 PID: 995 Comm: python3 Not tainted 5.16.0-rc5+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:uverbs_destroy_ufile_hw+0xcb/0xe0 [ib_uverbs] Code: 41 5c 41 5d 41 5e e9 44 34 f0 e0 48 89 df e8 4c 77 ff ff 49 8b 86 10 01 00 00 48 85 c0 74 a1 4c 89 e7 ff d0 eb 9a 0f 0b eb c1 <0f> 0b be 04 00 00 00 48 89 df e8 b6 f6 ff ff e9 75 ff ff ff 90 0f RSP: 0018:ffff8881533e3e78 EFLAGS: 00010287 RAX: ffff88811b2cf3e0 RBX: ffff888106209700 RCX: 0000000000000000 RDX: ffff888106209780 RSI: ffff8881533e3d30 RDI: ffff888109b101a0 RBP: 0000000000000001 R08: ffff888127cb381c R09: 0de9890000000009 R10: ffff888127cb3800 R11: 0000000000000000 R12: ffff888106209780 R13: ffff888106209750 R14: ffff888100f20660 R15: 0000000000000000 FS: 00007f8be353b740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8bd5b117c0 CR3: 000000012cd8a004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ib_uverbs_close+0x1a/0x90 [ib_uverbs] __fput+0x82/0x230 task_work_run+0x59/0x90 exit_to_user_mode_prepare+0x138/0x140 syscall_exit_to_user_mode+0x1d/0x50 ? __x64_sys_close+0xe/0x40 do_syscall_64+0x4a/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f8be3ae0abb Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 83 43 f9 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 c1 43 f9 ff 8b 44 RSP: 002b:00007ffdb51909c0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000557bb7f7c020 RCX: 00007f8be3ae0abb RDX: 0000557bb7c74010 RSI: 0000557bb7f14ca0 RDI: 0000000000000005 RBP: 0000557bb7fbd598 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 0000557bb7fbd5b8 R13: 0000557bb7fbd5a8 R14: 0000000000001000 R15: 0000557bb7f7c020 </TASK> Signed-off-by:
Patrisious Haddad <phaddad@nvidia.com> Link: https://lore.kernel.org/r/c6df677f931d18090bafbe7f7dbb9524047b7d9b.1685953497.git.leon@kernel.orgSigned-off-by:
-
Patrisious Haddad authored
Previously when destroying a DCT, if the firmware function for the destruction failed, the common resource would have been destroyed either way, since it was destroyed before the firmware object. Which leads to kernel warning "refcount_t: underflow" which indicates possible use-after-free. Which is triggered when we try to destroy the common resource for the second time and execute refcount_dec_and_test(&common->refcount). So, let's fix the destruction order by factoring out the DCT QP logic to be in separate XArray database. refcount_t: underflow; use-after-free. WARNING: CPU: 8 PID: 1002 at lib/refcount.c:28 refcount_warn_saturate+0xd8/0xe0 Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core overlay mlx5_core fuse CPU: 8 PID: 1002 Comm: python3 Not tainted 5.16.0-rc5+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0xd8/0xe0 Code: ff 48 c7 c7 18 f5 23 82 c6 05 60 70 ff 00 01 e8 d0 0a 45 00 0f 0b c3 48 c7 c7 c0 f4 23 82 c6 05 4c 70 ff 00 01 e8 ba 0a 45 00 <0f> 0b c3 0f 1f 44 00 00 8b 07 3d 00 00 00 c0 74 12 83 f8 01 74 13 RSP: 0018:ffff8881221d3aa8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8881313e8d40 RCX: ffff88852cc1b5c8 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff88852cc1b5c0 RBP: ffff888100f70000 R08: ffff88853ffd1ba8 R09: 0000000000000003 R10: 00000000fffff000 R11: 3fffffffffffffff R12: 0000000000000246 R13: ffff888100f71fa0 R14: ffff8881221d3c68 R15: 0000000000000020 FS: 00007efebbb13740(0000) GS:ffff88852cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005611aac29f80 CR3: 00000001313de004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> destroy_resource_common+0x6e/0x95 [mlx5_ib] mlx5_core_destroy_rq_tracked+0x38/0xbe [mlx5_ib] mlx5_ib_destroy_wq+0x22/0x80 [mlx5_ib] ib_destroy_wq_user+0x1f/0x40 [ib_core] uverbs_free_wq+0x19/0x40 [ib_uverbs] destroy_hw_idr_uobject+0x18/0x50 [ib_uverbs] uverbs_destroy_uobject+0x2f/0x190 [ib_uverbs] uobj_destroy+0x3c/0x80 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xb80 [ib_uverbs] ? uverbs_free_wq+0x40/0x40 [ib_uverbs] ? ip_list_rcv+0xf7/0x120 ? netif_receive_skb_list_internal+0x1b6/0x2d0 ? task_tick_fair+0xbf/0x450 ? __handle_mm_fault+0x11fc/0x1450 ib_uverbs_ioctl+0xa4/0x110 [ib_uverbs] __x64_sys_ioctl+0x3e4/0x8e0 ? handle_mm_fault+0xb9/0x210 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7efebc0be17b Code: 0f 1e fa 48 8b 05 1d ad 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed ac 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe71813e78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffe71813fb8 RCX: 00007efebc0be17b RDX: 00007ffe71813fa0 RSI: 00000000c0181b01 RDI: 0000000000000005 RBP: 00007ffe71813f80 R08: 00005611aae96020 R09: 000000000000004f R10: 00007efebbf9ffa0 R11: 0000000000000246 R12: 00007ffe71813f80 R13: 00007ffe71813f4c R14: 00005611aae2eca0 R15: 00007efeae6c89d0 </TASK> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/4470888466c8a898edc9833286967529cc5f3c0d.1685953497.git.leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
driver.h is common header to whole mlx5 code base, but struct mlx5_qp_table is used in mlx5_ib driver only. So move that struct to be under sole responsibility of mlx5_ib. Link: https://lore.kernel.org/r/bec0dc1158e795813b135d1143147977f26bf668.1685953497.git.leon@kernel.orgSigned-off-by:
Leon Romanovsky <leonro@nvidia.com>
-
Patrisious Haddad authored
Nullifying qp->dbg is a preparation for the next patches from the series in which mlx5_core_destroy_qp() could actually fail, and then it can be called again which causes a kernel crash, since qp->dbg was not nullified in previous call. Signed-off-by:
-
- 09 Jun, 2023 8 commits
-
-
Bryan Tan authored
wr->opcode is unsigned; checking if it is negative is unnecessary. Fix this issue by removing the check. Fixes: 29c8d9eb ("IB: Add vmw_pvrdma driver") Link: https://lore.kernel.org/r/20230605183728.47021-1-bryantan@vmware.comReported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/07c48eee-0aca-48ee-897a-38588c341c41@kili.mountainSigned-off-by:
Bryan Tan <bryantan@vmware.com> Signed-off-by:
-
Bob Pearson authored
The IBA requires: o11-5.2.5: If the HCA supports SRQ, for RC and UD service, the CI shall generate a Last WQE Reached Affiliated Asynchronous Event on a QP that is in the Error State and is associated with an SRQ when either: • a CQE is generated for the last WQE, or • the QP gets in the Error State and there are no more WQEs on the RQ. This patch implements this behavior in flush_recv_queue() which is called as a result of rxe_qp_error() being called whenever the qp is put into the error state. The rxe responder executes SRQ WQEs directly from the SRQ so there are never more WQES on the RQ. Link: https://lore.kernel.org/r/20230602164229.9277-1-rpearsonhpe@gmail.comSigned-off-by:
Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by:
-
Bob Pearson authored
Implement the two easy cases of ib_rereg_user_mr. Link: https://lore.kernel.org/r/20230530221334.89432-7-rpearsonhpe@gmail.comSigned-off-by:
-
Bob Pearson authored
In order to conform to other drivers stop using rkey == 0 as an indication that there are no remote access flags set. Set rkey == lkey by default for all MRs. Link: https://lore.kernel.org/r/20230530221334.89432-6-rpearsonhpe@gmail.comSigned-off-by:
-
Bob Pearson authored
Introduce supported bit masks for setting the access attributes of MWs, MRs, and QPs. Check these when attributes are set. Link: https://lore.kernel.org/r/20230530221334.89432-5-rpearsonhpe@gmail.comSigned-off-by:
-
Bob Pearson authored
The subroutine rxe_check_bind_mw() in rxe_mw.c performs checks on the mw access flags before they are set so they always succeed. This patch instead checks the access flags passed in the send wqe. Fixes: 32a577b4 ("RDMA/rxe: Add support for bind MW work requests") Link: https://lore.kernel.org/r/20230530221334.89432-4-rpearsonhpe@gmail.comSigned-off-by:
-
Bob Pearson authored
Bypass calling check_rkey() in rxe_resp.c for non-rdma messages. Link: https://lore.kernel.org/r/20230530221334.89432-3-rpearsonhpe@gmail.comSigned-off-by:
-
Bob Pearson authored
Rename IB_ACCESS_REMOTE to RXE_ACCESS_REMOTE and move to rxe_verbs.h as an enum instead of a #define. Shouldn't use IB_xxx for rxe symbols. Link: https://lore.kernel.org/r/20230530221334.89432-2-rpearsonhpe@gmail.comSigned-off-by:
-
- 01 Jun, 2023 10 commits
-
-
Chengchang Tang authored
Log return value of clear_hem() to help diagnose. Link: https://lore.kernel.org/r/20230523121641.3132102-4-huangjunxian6@hisilicon.comSigned-off-by:
Chengchang Tang <tangchengchang@huawei.com> Signed-off-by:
Junxian Huang <huangjunxian6@hisilicon.com> Signed-off-by:
-
Chengchang Tang authored
The return value of set_hem has been fixed to ENODEV, which will lead a diagnostic information missing. Fixes: 9a443537 ("IB/hns: Add driver files for hns RoCE driver") Link: https://lore.kernel.org/r/20230523121641.3132102-3-huangjunxian6@hisilicon.comSigned-off-by:
-
Junxian Huang authored
It is not necessary to check the type of the queue on IO path because unsupported QP type cannot be created. Link: https://lore.kernel.org/r/20230523121641.3132102-2-huangjunxian6@hisilicon.comSigned-off-by:
-
Brendan Cunningham authored
The struct mmu_rb_ops function pointers .insert, .invalidate were only used to increment and decrement struct sdma_mmu_node.refcount. With the deletion of struct sdma_mmu_node.refcount and the addition of struct mmu_rb_node.refcount these function pointers are not called and there are no implementations of them. So it is safe to delete these from struct mmu_rb_ops. Link: https://lore.kernel.org/r/168451526508.3702129.8677714753157495310.stgit@awfm-02.cornelisnetworks.comSigned-off-by:
Brendan Cunningham <bcunningham@cornelisnetworks.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by:
-
Brendan Cunningham authored
Add kref_read() of mmu_rb_node.refcount in hfi1_mmu_rb_template-type tracepoint output. Change hfi1_mmu_rb_template tracepoint to take a struct mmu_rb_node* and record the values it needs from that. This makes the trace_hfi1_mmu*() calls shorter and easier to read. Add hfi1_mmu_release_node() tracepoint before all mmu_rb_node->handler->ops->remove() calls. Make hfi1_mmu_rb_search() tracepoint its own tracepoint type separate from hfi1_mmu_rb_template since hfi1_mmu_rb_search() does not take a struct mmu_rb_node*. Link: https://lore.kernel.org/r/168451525987.3702129.12824880387615916700.stgit@awfm-02.cornelisnetworks.comReviewed-by:
Dean Luick <dean.luick@cornelisnetworks.com> Signed-off-by:
-
Brendan Cunningham authored
The hfi1 user SDMA pinned-page cache will leave a stale cache entry when the cache-entry's virtual address range is invalidated but that cache entry is in-use by an outstanding SDMA request. Subsequent user SDMA requests with buffers in or spanning the virtual address range of the stale cache entry will result in packets constructed from the wrong memory, the physical pages pointed to by the stale cache entry. To fix this, remove mmu_rb_node cache entries from the mmu_rb_handler cache independent of the cache entry's refcount. Add 'struct kref refcount' to struct mmu_rb_node and manage mmu_rb_node lifetime with kref_get() and kref_put(). mmu_rb_node.refcount makes sdma_mmu_node.refcount redundant. Remove 'atomic_t refcount' from struct sdma_mmu_node and change sdma_mmu_node code to use mmu_rb_node.refcount. Move the mmu_rb_handler destructor call after a wait-for-SDMA-request-completion call so mmu_rb_nodes that need mmu_rb_handler's workqueue to queue themselves up for destruction from an interrupt context may do so. Fixes: f48ad614 ("IB/hfi1: Move driver out of staging") Fixes: 00cbce5c ("IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests") Link: https://lore.kernel.org/r/168451393605.3700681.13493776139032178861.stgit@awfm-02.cornelisnetworks.comReviewed-by:
-
Li Zhijian authored
line 1701 and 1713 are duplicate: > 1701 cq_num = max_send_wr + max_recv_wr; 1702 /* alloc iu to recv new rkey reply when server reports flags set */ 1703 if (clt_path->flags & RTRS_MSG_NEW_RKEY_F || con->c.cid == 0) { 1704 con->rsp_ius = rtrs_iu_alloc(cq_num, sizeof(*rsp), 1705 GFP_KERNEL, 1706 clt_path->s.dev->ib_dev, 1707 DMA_FROM_DEVICE, 1708 rtrs_clt_rdma_done); 1709 if (!con->rsp_ius) 1710 return -ENOMEM; 1711 con->queue_num = cq_num; 1712 } > 1713 cq_num = max_send_wr + max_recv_wr; Remove the duplicate. Link: https://lore.kernel.org/r/1682384563-2-2-git-send-email-lizhijian@fujitsu.comAcked-by:Guoqing Jiang <guoqing.jiang@linux.dev> Acked-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
Li Zhijian <lizhijian@fujitsu.com> Signed-off-by:
-
Nicolas Morey authored
rxe_cq_disable() has been removed but not its declaration. Fixes: 78b26a33 ("RDMA/rxe: Remove tasklet call from rxe_cq.c") Link: https://lore.kernel.org/r/4f20ffc5-b2c4-0c11-2883-a835caf01a94@suse.comSigned-off-by:
Nicolas Morey <nmorey@suse.com> Acked-by:
Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
Commit df8fc4e9 ("kbuild: Enable -fstrict-flex-arrays=3") triggers a warning for fortified memset(): In function 'fortify_memset_chk', inlined from 'irdma_clr_wqes' at drivers/infiniband/hw/irdma/uk.c:103:4: include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 493 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The problem here isthat the inner array only has four 8-byte elements, so clearing 4096 bytes overflows that. As this structure is part of an outer array, change the code to pass a pointer to the irdma_qp_quanta instead, and change the size argument for readability, matching the comment above it. Fixes: 551c46ed ("RDMA/irdma: Add user/kernel shared libraries") Link: https://lore.kernel.org/r/20230523111859.2197825-1-arnd@kernel.orgSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Long Li authored
With RX coalescing, one CQE entry can be used to indicate multiple packets on the receive queue. This saves processing time and PCI bandwidth over the CQ. The MANA Ethernet driver also uses the v2 version of the protocol. It doesn't use RX coalescing and its behavior is not changed. Link: https://lore.kernel.org/r/1684045095-31228-1-git-send-email-longli@linuxonhyperv.comSigned-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
- 19 May, 2023 8 commits
-
-
Kalesh AP authored
The NULL check inside bnxt_qplib_del_sgid() and bnxt_qplib_add_sgid() always return false as the "sgid_tbl" inside "rdev->qplib_res" is a static memory. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1684478897-12247-8-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
-
Kalesh AP authored
When there is no cleanup to be done, return directly. This will help eliminating unnecessary local variables and goto labels. This patch fixes such occurrences in qplib_fp.c file. Fixes: 37cb11ac ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Fixes: 159fb4ce ("RDMA/bnxt_re: introduce a function to allocate swq") Link: https://lore.kernel.org/r/1684478897-12247-7-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
Kalesh AP authored
During destroy_qp, driver sets the qp handle in the existing CQEs belonging to the QP being destroyed to NULL. As a result, a poll_cq after destroy_qp can report unnecessary messages. Remove this noise from system logs. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1684478897-12247-6-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
Kalesh AP authored
The NULL check inside bnxt_re_update_gid() always return false. If sgid_tbl->tbl is not allocated, then dev_init would have failed. Fixes: 5fac5b1b ("RDMA/bnxt_re: Add vlan tag for untagged RoCE traffic when PFC is configured") Link: https://lore.kernel.org/r/1684478897-12247-5-git-send-email-selvin.xavier@broadcom.comReviewed-by:
Saravanan Vajravel <saravanan.vajravel@broadcom.com> Reviewed-by:
Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
-
Kalesh AP authored
bnxt_re currently uses the names "bnxt_qplib_creq" and "bnxt_qplib_nq-0" while registering IRQs. There is no way to distinguish the IRQs of different device ports when there are multiple IB devices registered. This could make the scenarios worse where one want to pin IRQs of a device port to certain CPUs. Fixed the code to use unique names which has PCI BDF information while registering interrupts like: "bnxt_re-nq-0@pci:0000:65:00.0" and "bnxt_re-creq@pci:0000:65:00.1". Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1684478897-12247-4-git-send-email-selvin.xavier@broadcom.comReviewed-by:
Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Signed-off-by:
-
Kalesh AP authored
If there is no cleanup needed then just return directly. This cleans up the code and improve readability. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1684478897-12247-3-git-send-email-selvin.xavier@broadcom.comReviewed-by:
-
Selvin Xavier authored
When the ulp hook to start the IRQ fails because the rings are not available, tasklets are not enabled. In this case when the driver is unloaded, driver calls CREQ tasklet_kill. This causes an indefinite hang as the tasklet is not enabled. Driver shouldn't call tasklet_kill if it is not enabled. So using the creq->requested and nq->requested flags to identify if both tasklets/irqs are registered. Checking this flag while scheduling the tasklet from ISR. Also, added a cleanup for disabling tasklet, in case request_irq fails during start_irq. Check for return value for bnxt_qplib_rcfw_start_irq and in case the bnxt_qplib_rcfw_start_irq fails, return bnxt_re_start_irq without attempting to start NQ IRQs. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1684478897-12247-2-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
Daisuke Matsuda authored
The commit 9b4b7c1f ("RDMA/rxe: Add workqueue support for rxe tasks") removed tasklets and replaced them with a workqueue, but relevant comments are still remaining in the source code. Fixes: 9b4b7c1f ("RDMA/rxe: Add workqueue support for rxe tasks") Link: https://lore.kernel.org/r/20230518070027.942715-1-matsuda-daisuke@fujitsu.comSigned-off-by:
Daisuke Matsuda <matsuda-daisuke@fujitsu.com> Reviewed-by:
-
- 17 May, 2023 1 commit
-
-
Kamal Heib authored
Move the initialization of the iw device ops to be under the declaration of the irdma_iw_dev_ops. Link: https://lore.kernel.org/r/20230515191142.413633-4-kheib@redhat.comSigned-off-by:
Kamal Heib <kheib@redhat.com> Reviewed-by:
-
