ixgbevf_init_module() won't destroy the workqueue created by
create_singlethread_workqueue() when pci_register_driver() failed. Add
destroy_workqueue() in fail path to prevent the resource leak.

Similar to the handling of u132_hcd_init in commit f276e002
("usb: u132-hcd: fix resource leak")

Fixes: 40a13e24 ("ixgbevf: Use a private workqueue to avoid certain possible hangs")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ZLP for DisplayLink ethernet devices was enabled in 6.0:
266c0190 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices").
The related driver_info should be the "same as cdc_ncm_info, but with
FLAG_SEND_ZLP". However, set_rx_mode that enables handling multicast
traffic was missing in the new cdc_ncm_zlp_info.

usbnet_cdc_update_filter rx mode was introduced in linux 5.9 with:
e10dcb1b ("net: cdc_ncm: hook into set_rx_mode to admit multicast
traffic")

Without this hook, multicast, and then IPv6 SLAAC, is broken.

Fixes: 266c0190 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices")
Signed-off-by: Santiago Ruano Rincón <santiago.ruano-rincon@imt-atlantique.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add RmNet support for LARA-L6.

LARA-L6 module can be configured (by AT interface) in three different
USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial
interface and 1 CDC-ECM virtual network interface

In RmNet mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

When holding a reader-writer spin lock we cannot sleep. Calling
setup_udp_tunnel_sock() with write lock held violates this rule, because we
end up calling percpu_down_read(), which might sleep, as syzbot reports
[1]:

 __might_resched.cold+0x222/0x26b kernel/sched/core.c:9890
 percpu_down_read include/linux/percpu-rwsem.h:49 [inline]
 cpus_read_lock+0x1b/0x140 kernel/cpu.c:310
 static_key_slow_inc+0x12/0x20 kernel/jump_label.c:158
 udp_tunnel_encap_enable include/net/udp_tunnel.h:187 [inline]
 setup_udp_tunnel_sock+0x43d/0x550 net/ipv4/udp_tunnel_core.c:81
 l2tp_tunnel_register+0xc51/0x1210 net/l2tp/l2tp_core.c:1509
 pppol2tp_connect+0xcdc/0x1a10 net/l2tp/l2tp_ppp.c:723

Trim the writer-side critical section for sk_callback_lock down to the
minimum, so that it covers only operations on sk_user_data.

Also, when grabbing the sk_callback_lock, we always need to disable BH, as
Eric points out. Failing to do so leads to deadlocks because we acquire
sk_callback_lock in softirq context, which can get stuck waiting on us if:

1) it runs on the same CPU, or

       CPU0
       ----
  lock(clock-AF_INET6);
  <Interrupt>
    lock(clock-AF_INET6);

2) lock ordering leads to priority inversion

       CPU0                    CPU1
       ----                    ----
  lock(clock-AF_INET6);
                               local_irq_disable();
                               lock(&tcp_hashinfo.bhash[i].lock);
                               lock(clock-AF_INET6);
  <Interrupt>
    lock(&tcp_hashinfo.bhash[i].lock);

... as syzbot reports [2,3]. Use the _bh variants for write_(un)lock.

[1] https://lore.kernel.org/netdev/0000000000004e78ec05eda79749@google.com/
[2] https://lore.kernel.org/netdev/000000000000e38b6605eda76f98@google.com/
[3] https://lore.kernel.org/netdev/000000000000dfa31e05eda76f75@google.com/

v2:
- Check and set sk_user_data while holding sk_callback_lock for both
  L2TP encapsulation types (IP and UDP) (Tetsuo)

Cc: Tom Parkin <tparkin@katalix.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Fixes: b68777d5 ("l2tp: Serialize access to sk_user_data with sk_callback_lock")
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+703d9e154b3b58277261@syzkaller.appspotmail.com
Reported-by: syzbot+50680ced9e98a61f7698@syzkaller.appspotmail.com
Reported-by: syzbot+de987172bb74a381879b@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dm9051_loop_rx() returns without release skb when dm9051_stop_mrcmd()
returns error, free the skb to avoid this leak.

Fixes: 2dc95a4d ("net: Add dm9051 driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In com20020_probe(), if com20020_config() fails, dev and info
will not be freed, which will lead to a memory leak.

This patch adds freeing dev and info after com20020_config()
fails to fix this bug.

Compile tested only.

Fixes: 15b99ac1 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5 fixes 2022-11-21

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2022-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Fix possible race condition in macsec extended packet number update routine
  net/mlx5e: Fix MACsec update SecY
  net/mlx5e: Fix MACsec SA initialization routine
  net/mlx5e: Remove leftovers from old XSK queues enumeration
  net/mlx5e: Offload rule only when all encaps are valid
  net/mlx5e: Fix missing alignment in size of MTT/KLM entries
  net/mlx5: Fix sync reset event handler error flow
  net/mlx5: E-Switch, Set correctly vport destination
  net/mlx5: Lag, avoid lockdep warnings
  net/mlx5: Fix handling of entry refcount when command is not issued to FW
  net/mlx5: cmdif, Print info on any firmware cmd failure to tracepoint
  net/mlx5: SF: Fix probing active SFs during driver probe phase
  net/mlx5: Fix FW tracer timestamp calculation
  net/mlx5: Do not query pci info while pci disabled
====================

Link: https://lore.kernel.org/r/20221122022559.89459-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In fib_table_insert(), if the alias was already inserted, but node not
exist, the error code should be set before return from error handling path.

Fixes: a6c76c17 ("ipv4: Notify route after insertion to the routing table")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/r/20221120072838.2167047-1-william.xuanziyang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Yan Cangang says:

====================
net: ethernet: mtk_eth_soc: fix memory leak in error path
====================

Link: https://lore.kernel.org/r/20221120055259.224555-1-nalanzeyu@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In mtk_ppe_init(), when dmam_alloc_coherent() or devm_kzalloc() failed,
the rhashtable ppe->l2_flows isn't destroyed. Fix it.

In mtk_probe(), when mtk_ppe_init() or mtk_eth_offload_init() or
register_netdev() failed, have the same problem. Fix it.

Fixes: 33fc42de ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Yan Cangang <nalanzeyu@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In mtk_probe(), when mtk_ppe_init() or mtk_eth_offload_init() failed,
mtk_mdio_cleanup() isn't called. Fix it.

Fixes: ba37b7ca ("net: ethernet: mtk_eth_soc: add support for initializing the PPE")
Fixes: 502e84e2 ("net: ethernet: mtk_eth_soc: add flow offloading support")
Signed-off-by: Yan Cangang <nalanzeyu@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When fail to dma_map_single() in mtk_rx_alloc(), it returns directly.
But the memory allocated for local variable data is not freed, and
local variabel data has not been attached to ring->data[i] yet, so the
memory allocated for local variable data will not be freed outside
mtk_rx_alloc() too. Thus memory leak would occur in this scenario.

Add skb_free_frag(data) when dma_map_single() failed.

Fixes: 23233e57 ("net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Link: https://lore.kernel.org/r/20221120035405.1464341-1-william.xuanziyang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kuniyuki Iwashima says:

====================
dccp/tcp: Fix bhash2 issues related to WARN_ON() in inet_csk_get_port().

syzkaller was hitting a WARN_ON() in inet_csk_get_port() in the 4th patch,
which was because we forgot to fix up bhash2 bucket when connect() for a
socket bound to a wildcard address fails in __inet_stream_connect().

There was a similar report [0], but its repro does not fire the WARN_ON() due
to inconsistent error handling.

When connect() for a socket bound to a wildcard address fails, saddr may or
may not be reset depending on where the failure happens.  When we fail in
__inet_stream_connect(), sk->sk_prot->disconnect() resets saddr.  OTOH, in
(dccp|tcp)_v[46]_connect(), if we fail after inet_hash6?_connect(), we
forget to reset saddr.

We fix this inconsistent error handling in the 1st patch, and then we'll
fix the bhash2 WARN_ON() issue.

Note that there is still an issue in that we reset saddr without checking
if there are conflicting sockets in bhash and bhash2, but this should be
another series.

See [1][2] for the previous discussion.

[0]: https://lore.kernel.org/netdev/0000000000003f33bc05dfaf44fe@google.com/
[1]: https://lore.kernel.org/netdev/20221029001249.86337-1-kuniyu@amazon.com/
[2]: https://lore.kernel.org/netdev/20221103172419.20977-1-kuniyu@amazon.com/
[3]: https://lore.kernel.org/netdev/20221118081906.053d5231@kernel.org/T/#m00aafedb29ff0b55d5e67aef0252ef1baaf4b6ee
====================

Link: https://lore.kernel.org/r/20221119014914.31792-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If a socket bound to a wildcard address fails to connect(), we
only reset saddr and keep the port.  Then, we have to fix up the
bhash2 bucket; otherwise, the bucket has an inconsistent address
in the list.

Also, listen() for such a socket will fire the WARN_ON() in
inet_csk_get_port(). [0]

Note that when a system runs out of memory, we give up fixing the
bucket and unlink sk from bhash and bhash2 by inet_put_port().

[0]:
WARNING: CPU: 0 PID: 207 at net/ipv4/inet_connection_sock.c:548 inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1))
Modules linked in:
CPU: 0 PID: 207 Comm: bhash2_prev_rep Not tainted 6.1.0-rc3-00799-gc8421681c845 #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014
RIP: 0010:inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1))
Code: 74 a7 eb 93 48 8b 54 24 18 0f b7 cb 4c 89 e6 4c 89 ff e8 48 b2 ff ff 49 8b 87 18 04 00 00 e9 32 ff ff ff 0f 0b e9 34 ff ff ff <0f> 0b e9 42 ff ff ff 41 8b 7f 50 41 8b 4f 54 89 fe 81 f6 00 00 ff
RSP: 0018:ffffc900003d7e50 EFLAGS: 00010202
RAX: ffff8881047fb500 RBX: 0000000000004e20 RCX: 0000000000000000
RDX: 000000000000000a RSI: 00000000fffffe00 RDI: 00000000ffffffff
RBP: ffffffff8324dc00 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000004e20 R15: ffff8881054e1280
FS:  00007f8ac04dc740(0000) GS:ffff88842fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020001540 CR3: 00000001055fa003 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 inet_csk_listen_start (net/ipv4/inet_connection_sock.c:1205)
 inet_listen (net/ipv4/af_inet.c:228)
 __sys_listen (net/socket.c:1810)
 __x64_sys_listen (net/socket.c:1819 net/socket.c:1817 net/socket.c:1817)
 do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
 entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7f8ac051de5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 af 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc1c177248 EFLAGS: 00000206 ORIG_RAX: 0000000000000032
RAX: ffffffffffffffda RBX: 0000000020001550 RCX: 00007f8ac051de5d
RDX: ffffffffffffff80 RSI: 0000000000000000 RDI: 0000000000000004
RBP: 00007ffc1c177270 R08: 0000000000000018 R09: 0000000000000007
R10: 0000000020001540 R11: 0000000000000206 R12: 00007ffc1c177388
R13: 0000000000401169 R14: 0000000000403e18 R15: 00007f8ac0723000
 </TASK>

Fixes: 28044fc1 ("net: Add a bhash2 table hashed by port and address")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When we call connect() for a socket bound to a wildcard address, we update
saddr locklessly.  However, it could result in a data race; another thread
iterating over bhash might see a corrupted address.

Let's update saddr under the bhash bucket's lock.

Fixes: 3df80d93 ("[DCCP]: Introduce DCCPv6")
Fixes: 7c657876 ("[DCCP]: Initial implementation")
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When we call inet_bhash2_update_saddr(), prev_saddr is always non-NULL.
Let's remove the unnecessary test.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When connect() is called on a socket bound to the wildcard address,
we change the socket's saddr to a local address.  If the socket
fails to connect() to the destination, we have to reset the saddr.

However, when an error occurs after inet_hash6?_connect() in
(dccp|tcp)_v[46]_conect(), we forget to reset saddr and leave
the socket bound to the address.

From the user's point of view, whether saddr is reset or not varies
with errno.  Let's fix this inconsistent behaviour.

Note that after this patch, the repro [0] will trigger the WARN_ON()
in inet_csk_get_port() again, but this patch is not buggy and rather
fixes a bug papering over the bhash2's bug for which we need another
fix.

For the record, the repro causes -EADDRNOTAVAIL in inet_hash6_connect()
by this sequence:

  s1 = socket()
  s1.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
  s1.bind(('127.0.0.1', 10000))
  s1.sendto(b'hello', MSG_FASTOPEN, (('127.0.0.1', 10000)))
  # or s1.connect(('127.0.0.1', 10000))

  s2 = socket()
  s2.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
  s2.bind(('0.0.0.0', 10000))
  s2.connect(('127.0.0.1', 10000))  # -EADDRNOTAVAIL

  s2.listen(32)  # WARN_ON(inet_csk(sk)->icsk_bind2_hash != tb2);

[0]: https://syzkaller.appspot.com/bug?extid=015d756bbd1f8b5c8f09

Fixes: 3df80d93 ("[DCCP]: Introduce DCCPv6")
Fixes: 7c657876 ("[DCCP]: Initial implementation")
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If PTP synchronisation is done every second, then sporadic the interval
is higher than one second:

ptp4l[696.582]: master offset        -17 s2 freq   -1891 path delay 573
ptp4l[697.582]: master offset        -22 s2 freq   -1901 path delay 573
ptp4l[699.368]: master offset         -1 s2 freq   -1887 path delay 573
      ^^^^^^^ Should be 698.582!

This problem is caused by rotten packets, which are received after
polling but before interrupts are enabled again. This can be fixed by
checking for pending work and rescheduling if necessary after interrupts
has been enabled again.

Fixes: 403f69bb ("tsnep: Add TSN endpoint Ethernet MAC driver")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/20221119211825.81805-1-gerhard@engleder-embedded.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Commit 4581dd48 ("net: octeontx2-pf: mcs: consider MACSEC setting")
has already added "depends on MACSEC || !MACSEC", so remove it.
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221119133616.3583538-1-zhengbin13@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). Call pci_dev_put() before returning from
bnx2x_vf_is_pcie_pending() to avoid refcount leak.

Fixes: b56e9670 ("bnx2x: Prepare device and initialize VF database")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221119070202.1407648-1-yangyingliang@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Syzbot reported a memory leak about skb:

unreferenced object 0xffff88810e144e00 (size 240):
  comm "syz-executor284", pid 3701, jiffies 4294952403 (age 12.620s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff83ab79a9>] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:497
    [<ffffffff82a5cf64>] alloc_skb include/linux/skbuff.h:1267 [inline]
    [<ffffffff82a5cf64>] virtual_ncidev_write+0x24/0xe0 drivers/nfc/virtual_ncidev.c:116
    [<ffffffff815f6503>] do_loop_readv_writev fs/read_write.c:759 [inline]
    [<ffffffff815f6503>] do_loop_readv_writev fs/read_write.c:743 [inline]
    [<ffffffff815f6503>] do_iter_write+0x253/0x300 fs/read_write.c:863
    [<ffffffff815f66ed>] vfs_writev+0xdd/0x240 fs/read_write.c:934
    [<ffffffff815f68f6>] do_writev+0xa6/0x1c0 fs/read_write.c:977
    [<ffffffff848802d5>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<ffffffff848802d5>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
    [<ffffffff84a00087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In nci_rx_data_packet(), if we don't get a valid conn_info, we will return
directly but forget to release the skb.

Reported-by: syzbot+cdb9a427d1bc08815104@syzkaller.appspotmail.com
Fixes: 4aeee687 ("NFC: nci: Add dynamic logical connections support")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20221118082419.239475-1-liushixin2@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In commit f11fe1da ("net/sched: Make NET_ACT_CT depends on NF_NAT"),
it fixed the build failure when NF_NAT is m and NET_ACT_CT is y by
adding depends on NF_NAT for NET_ACT_CT. However, it would also cause
NET_ACT_CT cannot be built without NF_NAT, which is not expected. This
patch fixes it by changing to use "(!NF_NAT || NF_NAT)" as the depend.

Fixes: f11fe1da ("net/sched: Make NET_ACT_CT depends on NF_NAT")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/b6386f28d1ba34721795fb776a91cbdabb203447.1668807183.git.lucien.xin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

If phylink_of_phy_connect() fails, the port should be disabled.
If sparx5_serdes_set()/phy_power_on() fails, the port should be
disabled and the phylink should be stopped and disconnected.

Fixes: 946e7fd5 ("net: sparx5: add port module support")
Fixes: f3cad261 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Tested-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20221117125918.203997-1-liujian56@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The __ef100_hard_start_xmit() returns NETDEV_TX_OK without freeing skb
in error handling case, add dev_kfree_skb_any() to fix it.

Fixes: 51b35a45 ("sfc: skeleton EF100 PF driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/1668671409-10909-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

acpi_evaluate_dsm() should be coupled with ACPI_FREE() to free the ACPI
memory, because we need to track the allocation of acpi_object when
ACPI_DBG_TRACK_ALLOCATIONS enabled, so use ACPI_FREE() instead of kfree().

Fixes: d38a648d ("net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221118062447.2324881-1-bobo.shaobowang@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Commit 1229b339 ("ice: Add low latency Tx timestamp read") refactored
PTP timestamping logic to use a threaded IRQ instead of a separate kthread.

This implementation introduced ice_misc_intr_thread_fn and redefined the
ice_ptp_process_ts function interface to return a value of whether or not
the timestamp processing was complete.

ice_misc_intr_thread_fn would take the return value from ice_ptp_process_ts
and convert it into either IRQ_HANDLED if there were no more timestamps to
be processed, or IRQ_WAKE_THREAD if the thread should continue processing.

This is not correct, as the kernel does not re-schedule threaded IRQ
functions automatically. IRQ_WAKE_THREAD can only be used by the main IRQ
function.

This results in the ice_ptp_process_ts function (and in turn the
ice_ptp_tx_tstamp function) from only being called exactly once per
interrupt.

If an application sends a burst of Tx timestamps without waiting for a
response, the interrupt will trigger for the first timestamp. However,
later timestamps may not have arrived yet. This can result in dropped or
discarded timestamps. Worse, on E822 hardware this results in the interrupt
logic getting stuck such that no future interrupts will be triggered. The
result is complete loss of Tx timestamp functionality.

Fix this by modifying the ice_misc_intr_thread_fn to perform its own
polling of the ice_ptp_process_ts function. We sleep for a few microseconds
between attempts to avoid wasting significant CPU time. The value was
chosen to allow time for the Tx timestamps to complete without wasting so
much time that we overrun application wait budgets in the worst case.

The ice_ptp_process_ts function also currently returns false in the event
that the Tx tracker is not initialized. This would result in the threaded
IRQ handler never exiting if it gets started while the tracker is not
initialized.

Fix the function to appropriately return true when the tracker is not
initialized.

Note that this will not reproduce with default ptp4l behavior, as the
program always synchronously waits for a timestamp response before sending
another timestamp request.
Reported-by: Siddaraju DH <siddaraju.dh@intel.com>
Fixes: 1229b339 ("ice: Add low latency Tx timestamp read")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20221118222729.1565317-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If skb_linearize() fails in tipc_disc_rcv(), we need to free the skb instead of
handle it.

Fixes: 25b0b9c4 ("tipc: handle collisions of 32-bit node address hash values")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/20221119072832.7896-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-11-18 (iavf)

Ivan Vecera resolves issues related to reset by adding back call to
netif_tx_stop_all_queues() and adding calls to dev_close() to ensure
device is properly closed during reset.

Stefan Assmann removes waiting for setting of MAC address as this breaks
ARP.

Slawomir adds setting of __IAVF_IN_REMOVE_TASK bit to prevent deadlock
between remove and shutdown.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: Fix race condition between iavf_shutdown and iavf_remove
  iavf: remove INITIAL_MAC_SET to allow gARP to work properly
  iavf: Do not restart Tx queues after reset task failure
  iavf: Fix a crash during reset task
====================

Link: https://lore.kernel.org/r/20221118222439.1565245-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Xin Long says:

====================
tipc: fix two race issues in tipc_conn_alloc

The race exists beteen tipc_topsrv_accept() and tipc_conn_close(),
one is allocating the con while the other is freeing it and there
is no proper lock protecting it. Therefore, a null-pointer-defer
and a use-after-free may be triggered, see details on each patch.
====================

Link: https://lore.kernel.org/r/cover.1668807842.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

One extra conn_get() is needed in tipc_conn_alloc(), as after
tipc_conn_alloc() is called, tipc_conn_close() may free this
con before deferencing it in tipc_topsrv_accept():

   tipc_conn_alloc();
   newsk = newsock->sk;
                                 <---- tipc_conn_close();
   write_lock_bh(&sk->sk_callback_lock);
   newsk->sk_data_ready = tipc_conn_data_ready;

Then an uaf issue can be triggered:

  BUG: KASAN: use-after-free in tipc_topsrv_accept+0x1e7/0x370 [tipc]
  Call Trace:
   <TASK>
   dump_stack_lvl+0x33/0x46
   print_report+0x178/0x4b0
   kasan_report+0x8c/0x100
   kasan_check_range+0x179/0x1e0
   tipc_topsrv_accept+0x1e7/0x370 [tipc]
   process_one_work+0x6a3/0x1030
   worker_thread+0x8a/0xdf0

This patch fixes it by holding it in tipc_conn_alloc(), then after
all accessing in tipc_topsrv_accept() releasing it. Note when does
this in tipc_topsrv_kern_subscr(), as tipc_conn_rcv_sub() returns
0 or -1 only, we don't need to check for "> 0".

Fixes: c5fa7b3c ("tipc: introduce new TIPC server infrastructure")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

A crash was reported by Wei Chen:

  BUG: kernel NULL pointer dereference, address: 0000000000000018
  RIP: 0010:tipc_conn_close+0x12/0x100
  Call Trace:
   tipc_topsrv_exit_net+0x139/0x320
   ops_exit_list.isra.9+0x49/0x80
   cleanup_net+0x31a/0x540
   process_one_work+0x3fa/0x9f0
   worker_thread+0x42/0x5c0

It was caused by !con->sock in tipc_conn_close(). In tipc_topsrv_accept(),
con is allocated in conn_idr then its sock is set:

  con = tipc_conn_alloc();
  ...                    <----[1]
  con->sock = newsock;

If tipc_conn_close() is called in anytime of [1], the null-pointer-def
is triggered by con->sock->sk due to con->sock is not yet set.

This patch fixes it by moving the con->sock setting to tipc_conn_alloc()
under s->idr_lock. So that con->sock can never be NULL when getting the
con from s->conn_idr. It will be also safer to move con->server and flag
CF_CONNECTED setting under s->idr_lock, as they should all be set before
tipc_conn_alloc() is called.

Fixes: c5fa7b3c ("tipc: introduce new TIPC server infrastructure")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix to return a negative error code from the ccr read error handling
case instead of 0, as done elsewhere in this function.

Fixes: 3265f421 ("net: phy: at803x: add fiber support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221118103635.254256-1-weiyongjun@huaweicloud.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currenty extended packet number (EPN) update routine is accessing
macsec object without holding the general macsec lock hence facing
a possible race condition when an EPN update occurs while updating
or deleting the SA.
Fix by holding the general macsec lock before accessing the object.

Fixes: 4411a6c0 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently updating SecY destroys and re-creates RX SA objects,
the re-created RX SA objects are not identical to the destroyed
objects and it disagree on the encryption enabled property which
holds the value false after recreation, this value is not
supported with offload which leads to no traffic after an update.
Fix by recreating an identical objects.

Fixes: 5a39816a ("net/mlx5e: Add MACsec offload SecY support")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently as part of MACsec SA initialization routine
extended packet number (EPN) object attribute is always
being set without checking if EPN is actually enabled,
the above could lead to a NULL dereference.
Fix by adding such a check.

Fixes: 4411a6c0 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Before the cited commit, for N channels, a dedicated set of N queues was
created to support XSK, in indices [N, 2N-1], doubling the number of
queues.

In addition, changing the number of channels was prohibited, as it would
shift the indices.

Remove these two leftovers, as we moved XSK to a new queueing scheme,
starting from index 0.

Fixes: 3db4c85c ("net/mlx5e: xsk: Use queue indices starting from 0 for XSK queues")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited commit adds a for loop to support multiple encapsulations.
But it only checks if the last encap is valid.

Fix it by setting slow path flag when one of the encap is invalid.

Fixes: f493f155 ("net/mlx5e: Move flow attr reformat action bit to per dest flags")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In the cited patch, an alignment required by the HW spec was mistakenly
dropped. Bring it back to fix error completions like the below:

mlx5_core 0000:00:08.0 eth2: Error cqe on cqn 0x40b, ci 0x0, qn 0x104f, opcode 0xd, syndrome 0x2, vendor syndrome 0x68
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 86 00 68 02 25 00 10 4f 00 00 bb d2
WQE DUMP: WQ size 1024 WQ cur size 0, WQE index 0x0, len: 192
00000000: 00 00 00 25 00 10 4f 0c 00 00 00 00 00 18 2e 00
00000010: 90 00 00 00 00 02 00 00 00 00 00 00 20 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000080: 08 00 00 00 48 6a 00 02 08 00 00 00 0e 10 00 02
00000090: 08 00 00 00 0c db 00 02 08 00 00 00 0e 82 00 02
000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fixes: 9f123f74 ("net/mlx5e: Improve MTT/KSM alignment")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When sync reset now event handling fails on mlx5_pci_link_toggle() then
no reset was done. However, since mlx5_cmd_fast_teardown_hca() was
already done, the firmware function is closed and the driver is left
without firmware functionality.

Fix it by setting device error state and reopen the firmware resources.
Reopening is done by the thread that was called for devlink reload
fw_activate as it already holds the devlink lock.

Fixes: 5ec69744 ("net/mlx5: Add support for devlink reload action fw activate")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited commit moved from using reformat_id integer to packet_reformat
pointer which introduced the possibility to null pointer dereference.
When setting packet reformat flag and pkt_reformat pointer must
exists so checking MLX5_ESW_DEST_ENCAP is not enough, we need
to make sure the pkt_reformat is valid and check for MLX5_ESW_DEST_ENCAP_VALID.
If the dest encap valid flag does not exists then pkt_reformat can be
either invalid address or null.
Also, to make sure we don't try to access invalid pkt_reformat set it to
null when invalidated and invalidate it before calling add flow code as
its logically more correct and to be safe.

Fixes: 2b688ea5 ("net/mlx5: Add flow steering actions to fs_cmd shim layer")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>