Pull io_uring updates from Jens Axboe:
 "Light on new features - basically just the hybrid mode support.

  Outside of that it's just fixes, cleanups, and performance
  improvements.

  In detail:

   - Add ring related information to the fdinfo output (Hao)

   - Hybrid async mode (Hao)

   - Support for batched issue on block (me)

   - sqe error trace improvement (me)

   - IOPOLL efficiency improvements (Pavel)

   - submit state cleanups and improvements (Pavel)

   - Completion side improvements (Pavel)

   - Drain improvements (Pavel)

   - Buffer selection cleanups (Pavel)

   - Fixed file node improvements (Pavel)

   - io-wq setup cancelation fix (Pavel)

   - Various other performance improvements and cleanups (Pavel)

   - Misc fixes (Arnd, Bixuan, Changcheng, Hao, me, Noah)"

* tag 'for-5.16/io_uring-2021-10-29' of git://git.kernel.dk/linux-block: (97 commits)
  io-wq: remove worker to owner tw dependency
  io_uring: harder fdinfo sq/cq ring iterating
  io_uring: don't assign write hint in the read path
  io_uring: clusterise ki_flags access in rw_prep
  io_uring: kill unused param from io_file_supports_nowait
  io_uring: clean up timeout async_data allocation
  io_uring: don't try io-wq polling if not supported
  io_uring: check if opcode needs poll first on arming
  io_uring: clean iowq submit work cancellation
  io_uring: clean io_wq_submit_work()'s main loop
  io-wq: use helper for worker refcounting
  io_uring: implement async hybrid mode for pollable requests
  io_uring: Use ERR_CAST() instead of ERR_PTR(PTR_ERR())
  io_uring: split logic of force_nonblock
  io_uring: warning about unused-but-set parameter
  io_uring: inform block layer of how many requests we are submitting
  io_uring: simplify io_file_supports_nowait()
  io_uring: combine REQ_F_NOWAIT_{READ,WRITE} flags
  io_uring: arm poll for non-nowait files
  fs/io_uring: Prioritise checking faster conditions first in io_write
  ...

Pull block driver updates from Jens Axboe:

 - paride driver cleanups (Christoph)

 - Remove cryptoloop support (Christoph)

 - null_blk poll support (me)

 - Now that add_disk() supports proper error handling, add it to various
   drivers (Luis)

 - Make ataflop actually work again (Michael)

 - s390 dasd fixes (Stefan, Heiko)

 - nbd fixes (Yu, Ye)

 - Remove redundant wq flush in mtip32xx (Christophe)

 - NVMe updates
      - fix a multipath partition scanning deadlock (Hannes Reinecke)
      - generate uevent once a multipath namespace is operational again
        (Hannes Reinecke)
      - support unique discovery controller NQNs (Hannes Reinecke)
      - fix use-after-free when a port is removed (Israel Rukshin)
      - clear shadow doorbell memory on resets (Keith Busch)
      - use struct_size (Len Baker)
      - add error handling support for add_disk (Luis Chamberlain)
      - limit the maximal queue size for RDMA controllers (Max Gurtovoy)
      - use a few more symbolic names (Max Gurtovoy)
      - fix error code in nvme_rdma_setup_ctrl (Max Gurtovoy)
      - add support for ->map_queues on FC (Saurav Kashyap)
      - support the current discovery subsystem entry (Hannes Reinecke)
      - use flex_array_size and struct_size (Len Baker)

 - bcache fixes (Christoph, Coly, Chao, Lin, Qing)

 - MD updates (Christoph, Guoqing, Xiao)

 - Misc fixes (Dan, Ding, Jiapeng, Shin'ichiro, Ye)

* tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-block: (117 commits)
  null_blk: Fix handling of submit_queues and poll_queues attributes
  block: ataflop: Fix warning comparing pointer to 0
  bcache: replace snprintf in show functions with sysfs_emit
  bcache: move uapi header bcache.h to bcache code directory
  nvmet: use flex_array_size and struct_size
  nvmet: register discovery subsystem as 'current'
  nvmet: switch check for subsystem type
  nvme: add new discovery log page entry definitions
  block: ataflop: more blk-mq refactoring fixes
  block: remove support for cryptoloop and the xor transfer
  mtd: add add_disk() error handling
  rnbd: add error handling support for add_disk()
  um/drivers/ubd_kern: add error handling support for add_disk()
  m68k/emu/nfblock: add error handling support for add_disk()
  xen-blkfront: add error handling support for add_disk()
  bcache: add error handling support for add_disk()
  dm: add add_disk() error handling
  block: aoe: fixup coccinelle warnings
  nvmet: use struct_size over open coded arithmetic
  nvme: drop scan_lock and always kick requeue list when removing namespaces
  ...

Pull block updates from Jens Axboe:

 - mq-deadline accounting improvements (Bart)

 - blk-wbt timer fix (Andrea)

 - Untangle the block layer includes (Christoph)

 - Rework the poll support to be bio based, which will enable adding
   support for polling for bio based drivers (Christoph)

 - Block layer core support for multi-actuator drives (Damien)

 - blk-crypto improvements (Eric)

 - Batched tag allocation support (me)

 - Request completion batching support (me)

 - Plugging improvements (me)

 - Shared tag set improvements (John)

 - Concurrent queue quiesce support (Ming)

 - Cache bdev in ->private_data for block devices (Pavel)

 - bdev dio improvements (Pavel)

 - Block device invalidation and block size improvements (Xie)

 - Various cleanups, fixes, and improvements (Christoph, Jackie,
   Masahira, Tejun, Yu, Pavel, Zheng, me)

* tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits)
  blk-mq-debugfs: Show active requests per queue for shared tags
  block: improve readability of blk_mq_end_request_batch()
  virtio-blk: Use blk_validate_block_size() to validate block size
  loop: Use blk_validate_block_size() to validate block size
  nbd: Use blk_validate_block_size() to validate block size
  block: Add a helper to validate the block size
  block: re-flow blk_mq_rq_ctx_init()
  block: prefetch request to be initialized
  block: pass in blk_mq_tags to blk_mq_rq_ctx_init()
  block: add rq_flags to struct blk_mq_alloc_data
  block: add async version of bio_set_polled
  block: kill DIO_MULTI_BIO
  block: kill unused polling bits in __blkdev_direct_IO()
  block: avoid extra iter advance with async iocb
  block: Add independent access ranges support
  blk-mq: don't issue request directly in case that current is to be blocked
  sbitmap: silence data race warning
  blk-cgroup: synchronize blkg creation against policy deactivation
  block: refactor bio_iov_bvec_set()
  block: add single bio async direct IO helper
  ...

Pull file locking updates from Jeff Layton:
 "Most of this is just follow-on cleanup work of documentation and
  comments from the mandatory locking removal in v5.15.

  The only real functional change is that LOCK_MAND flock() support is
  also being removed, as it has basically been non-functional since the
  v2.5 days"

* tag 'locks-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  fs: remove leftover comments from mandatory locking removal
  locks: remove changelog comments
  docs: fs: locks.rst: update comment about mandatory file locking
  Documentation: remove reference to now removed mandatory-locking doc
  locks: remove LOCK_MAND flock lock support

Pull tpm updates from Jarkko Sakkinen:
 "Only bug fixes"

* tag 'tpmdd-next-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm_tis_spi: Add missing SPI ID
  tpm: fix Atmel TPM crash caused by too frequent queries
  tpm: Check for integer overflow in tpm2_map_response_body()
  tpm: tis: Kconfig: Add helper dependency on COMPILE_TEST

Pull memory folios from Matthew Wilcox:
 "Add memory folios, a new type to represent either order-0 pages or the
  head page of a compound page. This should be enough infrastructure to
  support filesystems converting from pages to folios.

  The point of all this churn is to allow filesystems and the page cache
  to manage memory in larger chunks than PAGE_SIZE. The original plan
  was to use compound pages like THP does, but I ran into problems with
  some functions expecting only a head page while others expect the
  precise page containing a particular byte.

  The folio type allows a function to declare that it's expecting only a
  head page. Almost incidentally, this allows us to remove various calls
  to VM_BUG_ON(PageTail(page)) and compound_head().

  This converts just parts of the core MM and the page cache. For 5.17,
  we intend to convert various filesystems (XFS and AFS are ready; other
  filesystems may make it) and also convert more of the MM and page
  cache to folios. For 5.18, multi-page folios should be ready.

  The multi-page folios offer some improvement to some workloads. The
  80% win is real, but appears to be an artificial benchmark (postgres
  startup, which isn't a serious workload). Real workloads (eg building
  the kernel, running postgres in a steady state, etc) seem to benefit
  between 0-10%. I haven't heard of any performance losses as a result
  of this series. Nobody has done any serious performance tuning; I
  imagine that tweaking the readahead algorithm could provide some more
  interesting wins. There are also other places where we could choose to
  create large folios and currently do not, such as writes that are
  larger than PAGE_SIZE.

  I'd like to thank all my reviewers who've offered review/ack tags:
  Christoph Hellwig, David Howells, Jan Kara, Jeff Layton, Johannes
  Weiner, Kirill A. Shutemov, Michal Hocko, Mike Rapoport, Vlastimil
  Babka, William Kucharski, Yu Zhao and Zi Yan.

  I'd also like to thank those who gave feedback I incorporated but
  haven't offered up review tags for this part of the series: Nick
  Piggin, Mel Gorman, Ming Lei, Darrick Wong, Ted Ts'o, John Hubbard,
  Hugh Dickins, and probably a few others who I forget"

* tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache: (90 commits)
  mm/writeback: Add folio_write_one
  mm/filemap: Add FGP_STABLE
  mm/filemap: Add filemap_get_folio
  mm/filemap: Convert mapping_get_entry to return a folio
  mm/filemap: Add filemap_add_folio()
  mm/filemap: Add filemap_alloc_folio
  mm/page_alloc: Add folio allocation functions
  mm/lru: Add folio_add_lru()
  mm/lru: Convert __pagevec_lru_add_fn to take a folio
  mm: Add folio_evictable()
  mm/workingset: Convert workingset_refault() to take a folio
  mm/filemap: Add readahead_folio()
  mm/filemap: Add folio_mkwrite_check_truncate()
  mm/filemap: Add i_blocks_per_folio()
  mm/writeback: Add folio_redirty_for_writepage()
  mm/writeback: Add folio_account_redirty()
  mm/writeback: Add folio_clear_dirty_for_io()
  mm/writeback: Add folio_cancel_dirty()
  mm/writeback: Add folio_account_cleaned()
  mm/writeback: Add filemap_dirty_folio()
  ...

Merge tag 'perf-tools-fixes-for-v5.15-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix compilation of callchain related code on powerpc with gcc11+

 - Fix PERF_SAMPLE_WEIGHT_STRUCT support in 'perf script'

 - Check session->header.env.arch before using it, fixing a segmentation
   fault

 - Suppress 'rm dlfilter' build messages

* tag 'perf-tools-fixes-for-v5.15-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf script: Fix PERF_SAMPLE_WEIGHT_STRUCT support
  perf callchain: Fix compilation on powerpc with gcc11+
  perf script: Check session->header.env.arch before using it
  perf build: Suppress 'rm dlfilter' build message

Pull kvm fixes from Paolo Bonzini:

 - Fixes for s390 interrupt delivery

 - Fixes for Xen emulator bugs showing up as debug kernel WARNs

 - Fix another issue with SEV/ES string I/O VMGEXITs

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Take srcu lock in post_kvm_run_save()
  KVM: SEV-ES: fix another issue with string I/O VMGEXITs
  KVM: x86/xen: Fix kvm_xen_has_interrupt() sleeping in kvm_vcpu_block()
  KVM: x86: switch pvclock_gtod_sync_lock to a raw spinlock
  KVM: s390: preserve deliverable_mask in __airqs_kick_single_vcpu
  KVM: s390: clear kicked_mask before sleeping again

-F weight in perf script is broken.

  # ./perf mem record
  # ./perf script -F weight
  Samples for 'dummy:HG' event do not have WEIGHT attribute set. Cannot
print 'weight' field.

The sample type, PERF_SAMPLE_WEIGHT_STRUCT, is an alternative of the
PERF_SAMPLE_WEIGHT sample type. They share the same space, weight. The
lower 32 bits are exactly the same for both sample type. The higher 32
bits may be different for different architecture. For a new kernel on
x86, the PERF_SAMPLE_WEIGHT_STRUCT is used. For an old kernel or other
ARCHs, the PERF_SAMPLE_WEIGHT is used.

With -F weight, current perf script will only check the input string
"weight" with the PERF_SAMPLE_WEIGHT sample type. Because the commit
ea8d0ed6 ("perf tools: Support PERF_SAMPLE_WEIGHT_STRUCT") didn't
update the PERF_SAMPLE_WEIGHT_STRUCT sample type for perf script. For a
new kernel on x86, the check fails.

Use PERF_SAMPLE_WEIGHT_TYPE, which supports both sample types, to
replace PERF_SAMPLE_WEIGHT

Fixes: ea8d0ed6 ("perf tools: Support PERF_SAMPLE_WEIGHT_STRUCT")
Reported-by: Joe Mario <jmario@redhat.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Joe Mario <jmario@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/1632929894-102778-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Got following build fail on powerpc:

    CC      arch/powerpc/util/skip-callchain-idx.o
  In function ‘check_return_reg’,
      inlined from ‘check_return_addr’ at arch/powerpc/util/skip-callchain-idx.c:213:7,
      inlined from ‘arch_skip_callchain_idx’ at arch/powerpc/util/skip-callchain-idx.c:265:7:
  arch/powerpc/util/skip-callchain-idx.c:54:18: error: ‘dwarf_frame_register’ accessing 96 bytes \
  in a region of size 64 [-Werror=stringop-overflow=]
     54 |         result = dwarf_frame_register(frame, ra_regno, ops_mem, &ops, &nops);
        |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  arch/powerpc/util/skip-callchain-idx.c: In function ‘arch_skip_callchain_idx’:
  arch/powerpc/util/skip-callchain-idx.c:54:18: note: referencing argument 3 of type ‘Dwarf_Op *’
  In file included from /usr/include/elfutils/libdwfl.h:32,
                   from arch/powerpc/util/skip-callchain-idx.c:10:
  /usr/include/elfutils/libdw.h:1069:12: note: in a call to function ‘dwarf_frame_register’
   1069 | extern int dwarf_frame_register (Dwarf_Frame *frame, int regno,
        |            ^~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

The dwarf_frame_register args changed with [1],
Updating ops_mem accordingly.

[1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=5621fe5443da23112170235dd5cac161e5c75e65Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Mark Wieelard <mjw@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20210928195253.1267023-1-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When perf.data is not written cleanly, we would like to process existing
data as much as possible (please see f_header.data.size == 0 condition
in perf_session__read_header). However, perf.data with partial data may
crash perf. Specifically, we see crash in 'perf script' for NULL
session->header.env.arch.

Fix this by checking session->header.env.arch before using it to determine
native_arch. Also split the if condition so it is easier to read.

Committer notes:

If it is a pipe, we already assume is a native arch, so no need to check
session->header.env.arch.
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211004053238.514936-1-songliubraving@fb.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The following build message:

	rm dlfilters/dlfilter-test-api-v0.o

is unwanted.

The object file is being treated as an intermediate file and being
automatically removed. Mark the object file as .SECONDARY to prevent
removal and hence the message.
Requested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210930062849.110416-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull SCSI fixes from James Bottomley:
 "Three small fixes, all in drivers, and one sizeable update to the UFS
  driver to remove the HPB 2.0 feature that has been objected to by Jens
  and Christoph.

  Although the UFS patch is large and last minute, it's essentially the
  least intrusive way of resolving the objections in time for the 5.15
  release"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: ufshpb: Remove HPB2.0 flows
  scsi: mpt3sas: Fix reference tag handling for WRITE_INSERT
  scsi: ufs: ufs-exynos: Correct timeout value setting registers
  scsi: ibmvfc: Fix up duplicate response detection

Pull clk fix from Stephen Boyd:
 "One fix for the composite clk that broke when we changed this clk type
  to use the determine_rate instead of round_rate clk op by default.
  This caused lots of problems on Rockchip SoCs because they heavily use
  the composite clk code to model the clk tree"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: composite: Also consider .determine_rate for rate + mux composites

Pull RISC-V fixes from Palmer Dabbelt:
 "These are pretty late, but they do fix concrete issues.

   - ensure the trap vector's address is aligned.

   - avoid re-populating the KASAN shadow memory.

   - allow kasan to build without warnings, which have recently become
     errors"

* tag 'riscv-for-linus-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix asan-stack clang build
  riscv: Do not re-populate shadow memory with kasan_populate_early_shadow
  riscv: fix misalgned trap vector base address

The Host Performance Buffer feature allows UFS read commands to carry the
physical media addresses along with the LBAs, thus allowing less internal
L2P-table switches in the device.  HPB1.0 allowed a single LBA, while
HPB2.0 increases this capacity up to 255 blocks.

Carrying more than a single record, the read operation is no longer purely
of type "read" but a "hybrid" command: Writing the physical address to the
device in one operation and reading back the required payload in another.

The JEDEC HPB spec defines two commands for this operation:
HPB-WRITE-BUFFER (0x2) to write the physical addresses to device, and
HPB-READ to read the payload.

With the current HPB design the UFS driver has no alternative but to divide
the READ request into 2 separate commands: HPB-WRITE-BUFFER and HPB-READ.
This causes a great deal of aggravation to the block layer guys who
demanded that we completely revert the entire HPB driver regardless of the
huge amount of corporate effort already invested in it.

As a compromise, remove only the pieces that implement the 2.0
specification. This is done as a matter of urgency for the final 5.15
release.

Link: https://lore.kernel.org/r/20211030062301.248-1-avri.altman@wdc.comTested-by: Avri Altman <avri.altman@wdc.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Co-developed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull powerpc fixes from Michael Ellerman:
 "Three commits fixing some issues introduced with the recent IOMMU
  changes we merged.

  Thanks to Alexey Kardashevskiy"

* tag 'powerpc-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries/iommu: Create huge DMA window if no MMIO32 is present
  powerpc/pseries/iommu: Check if the default window in use before removing it
  powerpc/pseries/iommu: Use correct vfree for it_map

Pull gpio fixes from Bartosz Golaszewski:

 - fix the return value check when parsing the ngpios property in
   gpio-xgs-iproc

 - check the return value of bgpio_init() in gpio-mlxbf2

* tag 'gpio-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: mlxbf2.c: Add check for bgpio_init failure
  gpio: xgs-iproc: fix parsing of ngpios property

Pull block fixes from Jens Axboe:

 - NVMe pull request:
      - fix nvmet-tcp header digest verification (Amit Engel)
      - fix a memory leak in nvmet-tcp when releasing a queue (Maurizio
        Lombardi)
      - fix nvme-tcp H2CData PDU send accounting again (Sagi Grimberg)
      - fix digest pointer calculation in nvme-tcp and nvmet-tcp (Varun
        Prakash)
      - fix possible nvme-tcp req->offset corruption (Varun Prakash)

 - Queue drain ordering fix (Ming)

 - Partition check regression for zoned devices (Shin'ichiro)

 - Zone queue restart fix (Naohiro)

* tag 'block-5.15-2021-10-29' of git://git.kernel.dk/linux-block:
  block: Fix partition check for host-aware zoned block devices
  nvmet-tcp: fix header digest verification
  nvmet-tcp: fix data digest pointer calculation
  nvme-tcp: fix data digest pointer calculation
  nvme-tcp: fix possible req->offset corruption
  block: schedule queue restart after BLK_STS_ZONE_RESOURCE
  block: drain queue after disk is removed from sysfs
  nvme-tcp: fix H2CData PDU send accounting (again)
  nvmet-tcp: fix a memory leak when releasing a queue

Testing revealed a problem with how the reference tag was handled for
a WRITE_INSERT operation. The SCSI_PROT_REF_CHECK flag is not set when
the controller is asked to generate the protection information
(i.e. not DIX). And as a result the initial reference tag would not be
set in the WRITE_INSERT case.

Separate handling of the REF_CHECK and REF_INCREMENT flags to align
with both the DIX spec and the MPI implementation.

Link: https://lore.kernel.org/r/20211028034202.24225-1-martin.petersen@oracle.com
Fixes: b3e2c72a ("scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull MMC fixes from Ulf Hansson:

 - tmio: Re-enable card irqs after a reset

 - mtk-sd: Fixup probing of cqhci for crypto

 - cqhci: Fix support for suspend/resume

 - vub300: Fix control-message timeouts

 - dw_mmc-exynos: Fix support for tuning

 - winbond: Silences build errors on M68K

 - sdhci-esdhc-imx: Fix support for tuning

 - sdhci-pci: Read card detect from ACPI for Intel Merrifield

 - sdhci: Fix eMMC support for Thundercomm TurboX CM2290

* tag 'mmc-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: tmio: reenable card irqs after the reset callback
  mmc: mediatek: Move cqhci init behind ungate clock
  mmc: cqhci: clear HALT state after CQE enable
  mmc: vub300: fix control-message timeouts
  mmc: dw_mmc: exynos: fix the finding clock sample value
  mmc: winbond: don't build on M68K
  mmc: sdhci-esdhc-imx: clear the buffer_read_ready to reset standard tuning circuit
  mmc: sdhci-pci: Read card detect from ACPI for Intel Merrifield
  mmc: sdhci: Map more voltage level to SDHCI_POWER_330

Pull btrfs fixes from David Sterba:
 "Last minute fixes for crash on 32bit architectures when compression is
  in use. It's a regression introduced in 5.15-rc and I'd really like
  not let this into the final release, fixes via stable trees would add
  unnecessary delay.

  The problem is on 32bit architectures with highmem enabled, the pages
  for compression may need to be kmapped, while the patches removed that
  as we don't use GFP_HIGHMEM allocations anymore. The pages that don't
  come from local allocation still may be from highmem. Despite being on
  32bit there's enough such ARM machines in use so it's not a marginal
  issue.

  I did full reverts of the patches one by one instead of a huge one.
  There's one exception for the "lzo" revert as there was an
  intermediate patch touching the same code to make it compatible with
  subpage. I can't revert that one too, so the revert in lzo.c is
  manual. Qu Wenruo has worked on that with me and verified the changes"

* tag 'for-5.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Revert "btrfs: compression: drop kmap/kunmap from lzo"
  Revert "btrfs: compression: drop kmap/kunmap from zlib"
  Revert "btrfs: compression: drop kmap/kunmap from zstd"
  Revert "btrfs: compression: drop kmap/kunmap from generic helpers"

Pull tracing comment fixes from Steven Rostedt:

 - Some bots have informed me that some of the ftrace functions
   kernel-doc has formatting issues.

 - Also, fix my snake instinct.

* tag 'trace-v5.15-rc6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix misspelling of "missing"
  ftrace: Fix kernel-doc formatting issues

Pull crypto fix from Herbert Xu:
 "Fix a build-time warning in x86/sm4"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86/sm4 - Fix invalid section entry size

Merge misc fixes from Andrew Morton:
 "11 patches.

  Subsystems affected by this patch series: mm (memcg, memory-failure,
  oom-kill, secretmem, vmalloc, hugetlb, damon, and tools), and ocfs2"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  tools/testing/selftests/vm/split_huge_page_test.c: fix application of sizeof to pointer
  mm/damon/core-test: fix wrong expectations for 'damon_split_regions_of()'
  mm: khugepaged: skip huge page collapse for special files
  mm, thp: bail out early in collapse_file for writeback page
  mm/vmalloc: fix numa spreading for large hash tables
  mm/secretmem: avoid letting secretmem_users drop to zero
  ocfs2: fix race between searching chunks and release journal_head from buffer_head
  mm/oom_kill.c: prevent a race between process_mrelease and exit_mmap
  mm: filemap: check if THP has hwpoisoned subpage for PMD page fault
  mm: hwpoison: remove the unnecessary THP check
  memcg: page_alloc: skip bulk allocator for __GFP_ACCOUNT

Nathan reported that because KASAN_SHADOW_OFFSET was not defined in
Kconfig, it prevents asan-stack from getting disabled with clang even
when CONFIG_KASAN_STACK is disabled: fix this by defining the
corresponding config.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Fixes: 8ad8b727 ("riscv: Add KASAN support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

When calling this function, all the shadow memory is already populated
with kasan_early_shadow_pte which has PAGE_KERNEL protection.
kasan_populate_early_shadow write-protects the mapping of the range
of addresses passed in argument in zero_pte_populate, which actually
write-protects all the shadow memory mapping since kasan_early_shadow_pte
is used for all the shadow memory at this point. And then when using
memblock API to populate the shadow memory, the first write access to the
kernel stack triggers a trap. This becomes visible with the next commit
that contains a fix for asan-stack.

We already manually populate all the shadow memory in kasan_early_init
and we write-protect kasan_early_shadow_pte at the end of kasan_init
which makes the calls to kasan_populate_early_shadow superfluous so
we can remove them.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Fixes: e178d670 ("riscv/kasan: add KASAN_VMALLOC support")
Fixes: 8ad8b727 ("riscv: Add KASAN support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

INFO: task iou-wrk-6609:6612 blocked for more than 143 seconds.
      Not tainted 5.15.0-rc5-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:iou-wrk-6609    state:D stack:27944 pid: 6612 ppid:  6526 flags:0x00004006
Call Trace:
 context_switch kernel/sched/core.c:4940 [inline]
 __schedule+0xb44/0x5960 kernel/sched/core.c:6287
 schedule+0xd3/0x270 kernel/sched/core.c:6366
 schedule_timeout+0x1db/0x2a0 kernel/time/timer.c:1857
 do_wait_for_common kernel/sched/completion.c:85 [inline]
 __wait_for_common kernel/sched/completion.c:106 [inline]
 wait_for_common kernel/sched/completion.c:117 [inline]
 wait_for_completion+0x176/0x280 kernel/sched/completion.c:138
 io_worker_exit fs/io-wq.c:183 [inline]
 io_wqe_worker+0x66d/0xc40 fs/io-wq.c:597
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295

io-wq worker may submit a task_work to the master task and upon
io_worker_exit() wait for the tw to get executed. The problem appears
when the master task is waiting in coredump.c:

468                     freezer_do_not_count();
469                     wait_for_completion(&core_state->startup);
470                     freezer_count();

Apparently having some dependency on children threads getting everything
stuck. Workaround it by cancelling the taks_work callback that causes it
before going into io_worker_exit() waiting.

p.s. probably a better option is to not submit tw elevating the refcount
in the first place, but let's leave this excercise for the future.

Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+27d62ee6f256b186883e@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/142a716f4ed936feae868959059154362bfa8c19.1635509451.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

The ring iteration is racy, which isn't necessarily a problem except it
can cause us to iterate the whole thing. That isn't desired or ideal,
and it can lead to excessive runtimes of reading fdinfo.

Cap the iteration at tail - head OR the ring size. While in there, clean
up the ring masking and just dump the raw values along with the masks.
That provides more useful debug info.

Fixes: 83f84356 ("io_uring: add more uring info to fdinfo for debug")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

My snake instinct was on and I wrote "misssing" instead of "missing".
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Some functions had kernel-doc that used a comma instead of a hash to
separate the function name from the one line description.

Also, the "ftrace_is_dead()" had an incomplete description.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Commit 0a593fbb ("null_blk: poll queue support") introduced the poll
queue feature to null_blk. After this change, null_blk device has both
submit queues and poll queues, and null_map_queues() callback maps the
both queues for corresponding hardware contexts. The commit also added
the device configuration attribute 'poll_queues' in same manner as the
existing attribute 'submit_queues'. These attributes allow to modify the
numbers of queues. However, when the new values are stored to these
attributes, the values are just handled only for the corresponding
queue. When number of submit_queue is updated, number of poll_queue is
not counted, or vice versa.  This caused inconsistent number of queues
and queue mapping and resulted in null-ptr-dereference. This failure was
observed in blktests block/029 and block/030.

To avoid the inconsistency, fix the attribute updates to care both
submit_queues and poll_queues. Introduce the helper function
nullb_update_nr_hw_queues() to handle stores to the both two attributes.
Add poll_queues field to the struct nullb_device to track the number in
same manner as submit_queues. Add two more fields prev_submit_queues and
prev_poll_queues to keep the previous values before change. In case the
block layer failed to update the nr_hw_queues, refer the previous values
in null_map_queues() to map queues in same manner as before change.

Also add poll_queues value checks in nullb_update_nr_hw_queues() and
null_validate_conf(). They ensure the poll_queues value of each device
is within the range from 1 to module parameter value of poll_queues.

Fixes: 0a593fbb ("null_blk: poll queue support")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20211029103926.845635-1-shinichiro.kawasaki@wdc.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Fix the following coccicheck warning:

./drivers/block/ataflop.c:1464:20-21: WARNING comparing pointer to 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1635501029-81391-1-git-send-email-jiapeng.chong@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Currently we show the hctx.active value for the per-hctx "active" file.

However this is not maintained for shared tags, and we instead keep a
record of the number active requests per request queue - see commit
f1b49fdc ("blk-mq: Record active_queues_shared_sbitmap per tag_set for
when using shared sbitmap).

Change for the case of shared tags to show the active requests per request
queue by using __blk_mq_active_requests() helper.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1635496823-33515-1-git-send-email-john.garry@huawei.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

coccicheck complains about the use of snprintf() in sysfs show functions.

Fix the following coccicheck warning:
drivers/md/bcache/sysfs.h:54:12-20: WARNING: use scnprintf or sprintf.

Implement sysfs_print() by sysfs_emit() and remove snprint() since no one
uses it any more.
Suggested-by: Coly Li <colyli@suse.de>
Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20211029060930.119923-3-colyli@suse.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The header file include/uapi/linux/bcache.h is not really a user space
API heaer. This file defines the ondisk format of bcache internal meta
data but no one includes it from user space, bcache-tools has its own
copy of this header with minor modification.

Therefore, this patch moves include/uapi/linux/bcache.h to bcache code
directory as drivers/md/bcache/bcache_ondisk.h.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20211029060930.119923-2-colyli@suse.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit 8c945d32.

The kmaps in compression code are still needed and cause crashes on
32bit machines (ARM, x86). Reproducible eg. by running fstest btrfs/004
with enabled LZO or ZSTD compression.

The revert does not apply cleanly due to changes in a6e66e6f
("btrfs: rework lzo_decompress_bio() to make it subpage compatible")
that reworked the page iteration so the revert is done to be equivalent
to the original code.

Link: https://lore.kernel.org/all/CAJCQCtT+OuemovPO7GZk8Y8=qtOObr0XTDp8jh4OHD6y84AFxw@mail.gmail.com/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214839Tested-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This reverts commit 696ab562.

The kmaps in compression code are still needed and cause crashes on
32bit machines (ARM, x86). Reproducible eg. by running fstest btrfs/004
with enabled LZO or ZSTD compression.

Link: https://lore.kernel.org/all/CAJCQCtT+OuemovPO7GZk8Y8=qtOObr0XTDp8jh4OHD6y84AFxw@mail.gmail.com/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214839Signed-off-by: David Sterba <dsterba@suse.com>

This reverts commit bbaf9715.

The kmaps in compression code are still needed and cause crashes on
32bit machines (ARM, x86). Reproducible eg. by running fstest btrfs/004
with enabled LZO or ZSTD compression.

Example stacktrace with ZSTD on a 32bit ARM machine:

  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  pgd = c4159ed3
  [00000000] *pgd=00000000
  Internal error: Oops: 5 [#1] PREEMPT SMP ARM
  Modules linked in:
  CPU: 0 PID: 210 Comm: kworker/u2:3 Not tainted 5.14.0-rc79+ #12
  Hardware name: Allwinner sun4i/sun5i Families
  Workqueue: btrfs-delalloc btrfs_work_helper
  PC is at mmiocpy+0x48/0x330
  LR is at ZSTD_compressStream_generic+0x15c/0x28c

  (mmiocpy) from [<c0629648>] (ZSTD_compressStream_generic+0x15c/0x28c)
  (ZSTD_compressStream_generic) from [<c06297dc>] (ZSTD_compressStream+0x64/0xa0)
  (ZSTD_compressStream) from [<c049444c>] (zstd_compress_pages+0x170/0x488)
  (zstd_compress_pages) from [<c0496798>] (btrfs_compress_pages+0x124/0x12c)
  (btrfs_compress_pages) from [<c043c068>] (compress_file_range+0x3c0/0x834)
  (compress_file_range) from [<c043c4ec>] (async_cow_start+0x10/0x28)
  (async_cow_start) from [<c0475c3c>] (btrfs_work_helper+0x100/0x230)
  (btrfs_work_helper) from [<c014ef68>] (process_one_work+0x1b4/0x418)
  (process_one_work) from [<c014f210>] (worker_thread+0x44/0x524)
  (worker_thread) from [<c0156aa4>] (kthread+0x180/0x1b0)
  (kthread) from [<c0100150>]

Link: https://lore.kernel.org/all/CAJCQCtT+OuemovPO7GZk8Y8=qtOObr0XTDp8jh4OHD6y84AFxw@mail.gmail.com/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214839Signed-off-by: David Sterba <dsterba@suse.com>