- 17 Feb, 2017 6 commits
-
-
Ander Conselvan de Oliveira authored
In Geminilake, the degamma table is enabled or disabled by the pipe CSC enable bit, so its active even when running in the legacy gamma mode. So always set sane values for that table, since the default value is all zeroes. This fixes blank screens after a suspend/resume cycle while legacy gamma is in use. Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170217120630.6143-2-ander.conselvan.de.oliveira@intel.com
-
Tvrtko Ursulin authored
We have a few open coded instances in the execlists code and an almost suitable helper in intel_ringbuf.c We can consolidate to a single helper if we change the existing helper to emit directly to ring buffer memory and move the space reservation outside it. v2: Drop memcpy for memset. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170216122325.31391-2-tvrtko.ursulin@linux.intel.com
-
Tvrtko Ursulin authored
Use the "*batch++ = " style as in the ring emission for better readability and also simplify the logic a bit by consolidating the offset and size calculations and overflow checking. The latter is a programming error so it is not required to check for it after each write to the object, but rather do it once the whole state has been written and fail the driver if something went wrong. v2: Rebase. v3: Keep track of offsets and sizes in bytes for simplicity and rename function pointer variable to _fn suffix. (Chris Wilson) v4: Fix size calc broken in v3 and add alignment warning. (Chris Wilson) v5: Fix return code. v6: I added an exit from loop in v5 but forgot to put back the object teardown. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v5) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Tvrtko Ursulin authored
It is used by all submission backends. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Tvrtko Ursulin authored
We can call the engine cleanup vfunc instead of duplicating the decision making here. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Tvrtko Ursulin authored
It is only used within intel_ringbuffer.c Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.oc.uk>
-
- 16 Feb, 2017 13 commits
-
-
Chris Wilson authored
Since the frontbuffer has self-contained locking, it does not require us to hold the BKL struct_mutex as we send invalidate and flush messages. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170215105919.7347-3-chris@chris-wilson.co.ukReviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
We do not need the BKL struct_mutex in order to allocate a GEM object, nor to create the framebuffer, so resist the temptation to take the BKL willy nilly. As this changes the locking contract around internal API calls, the patch is a little larger than a plain removal of a pair of mutex_lock/unlock. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170215105919.7347-2-chris@chris-wilson.co.ukReviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
We do not need to hold struct_mutex for destroying drm_i915_gem_objects any longer, and with a little care taken over tracking obj->framebuffer_references, we can relinquish BKL locking around the destroy of intel_framebuffer. v2: Use atomic check for WARN_ON framebuffer miscounting Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170216094621.3426-1-chris@chris-wilson.co.ukReviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
The physical object is treated as permanently pinned. If we fail to take this initial pin during i915_gem_object_attach_phys() we need to revert it back to an ordinary shmemfs object before reporting the failure. v2: git-add Reported-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215163900.11606-1-chris@chris-wilson.co.ukReviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
-
Chris Wilson authored
We wait upon jiffies, but report the time elapsed using a high-resolution timer. This discrepancy can lead to us timing out the wait prior to us reporting the elapsed time as complete. This restores the squelching lost in commit e95433c7 ("drm/i915: Rearrange i915_wait_request() accounting with callers"). Fixes: e95433c7 ("drm/i915: Rearrange i915_wait_request() accounting with callers") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+ Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/20170216125441.30923-1-chris@chris-wilson.co.ukReviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Uma Shankar authored
Disable device ready before MIPI port shutdown command. This helps to avoid mipi split screen issues. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com> Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-8-git-send-email-vidya.srinivas@intel.com
-
Uma Shankar authored
Fix the Sequence to program BXT DSI Latch and ULPS. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com> Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-6-git-send-email-vidya.srinivas@intel.com
-
Deepak M authored
Dual link Z-inversion overlap field is present in MIPI_CTRL register unlike the older platforms, hence setting the same in this patch. Signed-off-by: Deepak M <m.deepak@intel.com> Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487078180-15147-5-git-send-email-madhav.chauhan@intel.com
-
sagar.a.kamble@intel.com authored
HUC_STATUS, GUC_STATUS, SOFT_SCRATCH registers are read in debugfs and getparam ioctl. This patch covers those accesses by RPM get/put. v2: Covering access in i915_getparam(I915_PARAM_HUC_STATUS) (ChrisW) Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Fiedorowicz, Lukasz <lukasz.fiedorowicz@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486110513-12130-1-git-send-email-sagar.a.kamble@intel.com
-
Chris Wilson authored
In order to prevent accessing the hpd registers outside of the display power wells, we should refrain from writing to the registers before the display interrupts are enabled. [ 4.740136] WARNING: CPU: 1 PID: 221 at drivers/gpu/drm/i915/intel_uncore.c:795 __unclaimed_reg_debug+0x44/0x50 [i915] [ 4.740155] Unclaimed read from register 0x1e1110 [ 4.740168] Modules linked in: i915(+) intel_gtt drm_kms_helper prime_numbers [ 4.740190] CPU: 1 PID: 221 Comm: systemd-udevd Not tainted 4.10.0-rc6+ #384 [ 4.740203] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [ 4.740220] Call Trace: [ 4.740236] dump_stack+0x4d/0x6f [ 4.740251] __warn+0xc1/0xe0 [ 4.740265] warn_slowpath_fmt+0x4a/0x50 [ 4.740281] ? insert_work+0x77/0xc0 [ 4.740355] ? fwtable_write32+0x90/0x130 [i915] [ 4.740431] __unclaimed_reg_debug+0x44/0x50 [i915] [ 4.740507] fwtable_read32+0xd8/0x130 [i915] [ 4.740575] i915_hpd_irq_setup+0xa5/0x100 [i915] [ 4.740649] intel_hpd_init+0x68/0x80 [i915] [ 4.740716] i915_driver_load+0xe19/0x1380 [i915] [ 4.740784] i915_pci_probe+0x32/0x90 [i915] [ 4.740799] pci_device_probe+0x8b/0xf0 [ 4.740815] driver_probe_device+0x2b6/0x450 [ 4.740828] __driver_attach+0xda/0xe0 [ 4.740841] ? driver_probe_device+0x450/0x450 [ 4.740853] bus_for_each_dev+0x5b/0x90 [ 4.740865] driver_attach+0x19/0x20 [ 4.740878] bus_add_driver+0x166/0x260 [ 4.740892] driver_register+0x5b/0xd0 [ 4.740906] ? 0xffffffffa0166000 [ 4.740920] __pci_register_driver+0x47/0x50 [ 4.740985] i915_init+0x5c/0x5e [i915] [ 4.740999] do_one_initcall+0x3e/0x160 [ 4.741015] ? __vunmap+0x7c/0xc0 [ 4.741029] ? kmem_cache_alloc+0xcf/0x120 [ 4.741045] do_init_module+0x55/0x1c4 [ 4.741060] load_module+0x1f3f/0x25b0 [ 4.741073] ? __symbol_put+0x40/0x40 [ 4.741086] ? kernel_read_file+0x100/0x190 [ 4.741100] SYSC_finit_module+0xbc/0xf0 [ 4.741112] SyS_finit_module+0x9/0x10 [ 4.741125] entry_SYSCALL_64_fastpath+0x17/0x98 [ 4.741135] RIP: 0033:0x7f8559a140f9 [ 4.741145] RSP: 002b:00007fff7509a3e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.741161] RAX: ffffffffffffffda RBX: 00007f855aba02d1 RCX: 00007f8559a140f9 [ 4.741172] RDX: 0000000000000000 RSI: 000055b6db0914f0 RDI: 0000000000000011 [ 4.741183] RBP: 0000000000020000 R08: 0000000000000000 R09: 000000000000000e [ 4.741193] R10: 0000000000000011 R11: 0000000000000246 R12: 000055b6db0854d0 [ 4.741204] R13: 000055b6db091150 R14: 0000000000000000 R15: 000055b6db035924 v2: Set dev_priv->display_irqs_enabled to true for all platforms other than vlv/chv that manually control the display power domain. Fixes: 19625e85 ("drm/i915: Enable polling when we don't have hpd") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97798Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lyude <cpaul@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Hans de Goede <jwrdegoede@fedoraproject.org> Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/20170215131547.5064-1-chris@chris-wilson.co.ukReviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Jani Nikula authored
No need to cater for old A revisions. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487172099-24873-4-git-send-email-jani.nikula@intel.com
-
Jani Nikula authored
No need to cater for old A revisions. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487172099-24873-3-git-send-email-jani.nikula@intel.com
-
Jani Nikula authored
No need to cater for old A revisions. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487172099-24873-2-git-send-email-jani.nikula@intel.com
-
- 15 Feb, 2017 21 commits
-
-
Uma Shankar authored
MIPI Video Mode for high res panels (requiring dual link), need a 8X/3 divider to be programmed as 0x2. Modifying the same in this patch. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-3-git-send-email-vidya.srinivas@intel.com
-
Uma Shankar authored
Panel GPIO control should be done based on platform. Add a check to restrict VLV and CHT specific GPIO confirguration, so that they dont apply to other platforms. The VBT spec fails to mention the PMIC backlight control option is valid only for VLV/CHT, and the field may be set to "PMIC" for BXT even if PMIC is not desired or possible. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com> [Jani: amended commit message a bit and fixed indentation.] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-2-git-send-email-vidya.srinivas@intel.com
-
Manasi Navare authored
The max link parameters should be set/reset only on HPD or connected boot case or on system resume. Add a flag reset_link_params to intel_dp to decide when to reset the max link parameters. This prevents the parameters from getting reset/overwritten through all other connector->funcs->detect() calls. This is important when link training fails and the max link params are modified to the lower fallback values. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486515251-23469-1-git-send-email-manasi.d.navare@intel.com
-
Chris Wilson authored
Make checkpatch happy and make the use of u32/u64 consistent throughout i915_gem_gtt.[ch] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-23-chris@chris-wilson.co.uk
-
Chris Wilson authored
Use an invalid filp so that the aliasing_ppgtt can be clearly identified. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-22-chris@chris-wilson.co.uk
-
Chris Wilson authored
As the aliasing GTT is only accessed via the global GTT, we will never use more of it than we expose via the Global GTT and so we only need to preallocate sufficient space within the ppgtt for the full GTT. Equally, if the aliasing GTT is smaller than the global GTT, we have a serious issue and must bail. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-21-chris@chris-wilson.co.uk
-
Chris Wilson authored
Once upon a time, back in the UMS days, we supported userspace initialising the GTT and sharing portions of the GTT with other users. Now, we own the GTT (both global and per-process) and the tables always start at 0 - so we can remove i915_address_space.start and forget about this old complication. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-20-chris@chris-wilson.co.uk
-
Chris Wilson authored
We never assign or use the ppgtt->enable() callback, so remove it. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-19-chris@chris-wilson.co.uk
-
Chris Wilson authored
The tracepoints are now entirely synonymous with binding and unbinding the VMA (and the tracepoints there). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-18-chris@chris-wilson.co.uk
-
Chris Wilson authored
We want to reload the PDP (and flush the TLB) when the addresses are changed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-17-chris@chris-wilson.co.uk
-
Chris Wilson authored
The barrier here is not required - we apply the barrier before the range is ever reused by the GPU instead. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-16-chris@chris-wilson.co.uk
-
Chris Wilson authored
We only operate on known extents (both for alloc/clear) and so we can use both the knowledge of the bind/unbind range along with the knowledge of the existing pagetable to avoid having to allocate temporary and auxiliary bitmaps. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-15-chris@chris-wilson.co.uk
-
Chris Wilson authored
We only operate on known extents (both for alloc/clear) and so we can use both the knowledge of the bind/unbind range along with the knowledge of the existing pagetable to avoid having to allocate temporary and auxiliary bitmaps. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-14-chris@chris-wilson.co.uk
-
Chris Wilson authored
We only operate on known extents (both for alloc/clear) and so we can use both the knowledge of the bind/unbind range along with the knowledge of the existing pagetable to avoid having to allocate temporary and auxiliary bitmaps. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-13-chris@chris-wilson.co.uk
-
Chris Wilson authored
We only operate on known extents (both for alloc/clear) and so we can use both the knowledge of the bind/unbind range along with the knowledge of the existing pagetable to avoid having to allocate temporary and auxiliary bitmaps. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99295Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-12-chris@chris-wilson.co.uk
-
Chris Wilson authored
Stop passing around unused parameters makes the code more compact. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-11-chris@chris-wilson.co.uk
-
Chris Wilson authored
Upon creation of the va range, it is initialised to point at scratch. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-10-chris@chris-wilson.co.uk
-
Chris Wilson authored
The hardware does not cope very well with us changing the PD within an active context (the context must be idle for it to re-read the PD). As we only check whether the page is idle before changing the entry (and on through the PD tree), we cannot reliably replace PD entries on gen6/gen7. To fully avoid changing the tree at runtime, preallocate it on init. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-9-chris@chris-wilson.co.uk
-
Chris Wilson authored
In the future, we need to call allocate_va_range on the aliasing-ppgtt which means moving the call down from the vma into the vm (which is more appropriate for calling the vm function). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-8-chris@chris-wilson.co.uk
-
Chris Wilson authored
As these are now both plain and simple kmap_atomic/kunmap_atomic pairs, we can remove the wrappers for a small gain of clarity (in particular, not hiding the atomic critical sections!). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-7-chris@chris-wilson.co.uk
-
Chris Wilson authored
We flush the entire page every time we update a few bytes, making the update of a page table many, many times slower than is required. If we create a WC map of the page for our updates, we can avoid the clflush but incur additional cost for creating the pagetable. We amoritize that cost by reusing page vmappings, and only changing the page protection in batches. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
-