- 03 Sep, 2016 4 commits
-
-
Simon Horman authored
[ Upstream commit 69874ec2 ] Add the device ID for the PF of the NFP4000. The device ID for the VF, 0x6003, is already present as PCI_DEVICE_ID_NETRONOME_NFP6000_VF. Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Jason S. McMullan authored
[ Upstream commit 9f33a2ae ] The NFP6000 has an erratum where reading/writing to PCI config space addresses above 0x600 can cause the NFP to generate PCIe completion timeouts. Limit the NFP6000's config space size to 0x600 bytes. Signed-off-by:
Jason S. McMullan <jason.mcmullan@netronome.com> [simon: edited changelog] Signed-off-by:
-
Jason S. McMullan authored
[ Upstream commit a755e169 ] Device IDs for the Netronome NFP3200, NFP3240, NFP6000, and NFP6000 SR-IOV devices. Signed-off-by:
-
Jason S. McMullan authored
[ Upstream commit c20aecf6 ] If a device quirk modifies the pci_dev->cfg_size to be less than PCI_CFG_SPACE_EXP_SIZE (4096), but greater than PCI_CFG_SPACE_SIZE (256), the PCI sysfs interface truncates the readable size to PCI_CFG_SPACE_SIZE. Allow sysfs access to config space up to cfg_size, even if the device doesn't support the entire 4096-byte PCIe config space. Note that pci_read_config() and pci_write_config() limit access to dev->cfg_size even though pcie_config_attr contains 4096 (the maximum size). Signed-off-by:
-
- 31 Aug, 2016 36 commits
-
-
Vegard Nossum authored
[ Upstream commit 088bf2ff ] seq_read() is a nasty piece of work, not to mention buggy. It has (I think) an old bug which allows unprivileged userspace to read beyond the end of m->buf. I was getting these: BUG: KASAN: slab-out-of-bounds in seq_read+0xcd2/0x1480 at addr ffff880116889880 Read of size 2713 by task trinity-c2/1329 CPU: 2 PID: 1329 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #96 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: kasan_object_err+0x1c/0x80 kasan_report_error+0x2cb/0x7e0 kasan_report+0x4e/0x80 check_memory_region+0x13e/0x1a0 kasan_check_read+0x11/0x20 seq_read+0xcd2/0x1480 proc_reg_read+0x10b/0x260 do_loop_readv_writev.part.5+0x140/0x2c0 do_readv_writev+0x589/0x860 vfs_readv+0x7b/0xd0 do_readv+0xd8/0x2c0 SyS_readv+0xb/0x10 do_syscall_64+0x1b3/0x4b0 entry_SYSCALL64_slow_path+0x25/0x25 Object at ffff880116889100, in cache kmalloc-4096 size: 4096 Allocated: PID = 1329 save_stack_trace+0x26/0x80 save_stack+0x46/0xd0 kasan_kmalloc+0xad/0xe0 __kmalloc+0x1aa/0x4a0 seq_buf_alloc+0x35/0x40 seq_read+0x7d8/0x1480 proc_reg_read+0x10b/0x260 do_loop_readv_writev.part.5+0x140/0x2c0 do_readv_writev+0x589/0x860 vfs_readv+0x7b/0xd0 do_readv+0xd8/0x2c0 SyS_readv+0xb/0x10 do_syscall_64+0x1b3/0x4b0 return_from_SYSCALL_64+0x0/0x6a Freed: PID = 0 (stack is not available) Memory state around the buggy address: ffff88011688a000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88011688a080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff88011688a100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88011688a180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88011688a200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint This seems to be the same thing that Dave Jones was seeing here: https://lkml.org/lkml/2016/8/12/334 There are multiple issues here: 1) If we enter the function with a non-empty buffer, there is an attempt to flush it. But it was not clearing m->from after doing so, which means that if we try to do this flush twice in a row without any call to traverse() in between, we are going to be reading from the wrong place -- the splat above, fixed by this patch. 2) If there's a short write to userspace because of page faults, the buffer may already contain multiple lines (i.e. pos has advanced by more than 1), but we don't save the progress that was made so the next call will output what we've already returned previously. Since that is a much less serious issue (and I have a headache after staring at seq_read() for the past 8 hours), I'll leave that for now. Link: http://lkml.kernel.org/r/1471447270-32093-1-git-send-email-vegard.nossum@oracle.comSigned-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Reported-by:
Dave Jones <davej@codemonkey.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit b53e7d00 ] The bootloader (U-boot) sometimes uses this timer for various delays. It uses it as a ongoing counter, and does comparisons on the current counter value. The timer counter is never stopped. In some cases when the user interacts with the bootloader, or lets it idle for some time before loading Linux, the timer may expire, and an interrupt will be pending. This results in an unexpected interrupt when the timer interrupt is enabled by the kernel, at which point the event_handler isn't set yet. This results in a NULL pointer dereference exception, panic, and no way to reboot. Clear any pending interrupts after we stop the timer in the probe function to avoid this. Cc: stable@vger.kernel.org Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Mike Snitzer authored
[ Upstream commit 299f6230 ] v4.8-rc3 commit 99f3c90d ("dm flakey: error READ bios during the down_interval") overlooked the 'drop_writes' feature, which is meant to allow reads to be issued rather than errored, during the down_interval. Fixes: 99f3c90d ("dm flakey: error READ bios during the down_interval") Reported-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Jan Beulich authored
[ Upstream commit 9a035a40 ] This should really only be done for XS_TRANSACTION_END messages, or else at least some of the xenstore-* tools don't work anymore. Fixes: 0beef634 ("xenbus: don't BUG() on user mode induced condition") Reported-by:
Richard Schütz <rschuetz@uni-koblenz.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Jan Beulich <jbeulich@suse.com> Tested-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Wanpeng Li authored
[ Upstream commit 2e63ad4b ] native_smp_prepare_cpus -> default_setup_apic_routing -> enable_IR_x2apic -> irq_remapping_prepare -> intel_prepare_irq_remapping -> intel_setup_irq_remapping So IR table is setup even if "noapic" boot parameter is added. As a result we crash later when the interrupt affinity is set due to a half initialized remapping infrastructure. Prevent remap initialization when IOAPIC is disabled. Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Link: http://lkml.kernel.org/r/1471954039-3942-1-git-send-email-wanpeng.li@hotmail.com Cc: stable@vger.kernel.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
John Stultz authored
[ Upstream commit a4f8f666 ] It was reported that hibernation could fail on the 2nd attempt, where the system hangs at hibernate() -> syscore_resume() -> i8237A_resume() -> claim_dma_lock(), because the lock has already been taken. However there is actually no other process would like to grab this lock on that problematic platform. Further investigation showed that the problem is triggered by setting /sys/power/pm_trace to 1 before the 1st hibernation. Since once pm_trace is enabled, the rtc becomes unmeaningful after suspend, and meanwhile some BIOSes would like to adjust the 'invalid' RTC (e.g, smaller than 1970) to the release date of that motherboard during POST stage, thus after resumed, it may seem that the system had a significant long sleep time which is a completely meaningless value. Then in timekeeping_resume -> tk_debug_account_sleep_time, if the bit31 of the sleep time happened to be set to 1, fls() returns 32 and we add 1 to sleep_time_bin[32], which causes an out of bounds array access and therefor memory being overwritten. As depicted by System.map: 0xffffffff81c9d080 b sleep_time_bin 0xffffffff81c9d100 B dma_spin_lock the dma_spin_lock.val is set to 1, which caused this problem. This patch adds a sanity check in tk_debug_account_sleep_time() to ensure we don't index past the sleep_time_bin array. [jstultz: Problem diagnosed and original patch by Chen Yu, I've solved the issue slightly differently, but borrowed his excelent explanation of the issue here.] Fixes: 5c83545f "power: Add option to log time spent in suspend" Reported-by:
Janek Kozicki <cosurgi@gmail.com> Reported-by:
Chen Yu <yu.c.chen@intel.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Cc: linux-pm@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Xunlei Pang <xpang@redhat.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: stable <stable@vger.kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Link: http://lkml.kernel.org/r/1471993702-29148-3-git-send-email-john.stultz@linaro.orgSigned-off-by:
-
John Stultz authored
[ Upstream commit 27727df2 ] When I added some extra sanity checking in timekeeping_get_ns() under CONFIG_DEBUG_TIMEKEEPING, I missed that the NMI safe __ktime_get_fast_ns() method was using timekeeping_get_ns(). Thus the locking added to the debug checks broke the NMI-safety of __ktime_get_fast_ns(). This patch open-codes the timekeeping_get_ns() logic for __ktime_get_fast_ns(), so can avoid any deadlocks in NMI. Fixes: 4ca22c26 "timekeeping: Add warnings when overflows or underflows are observed" Reported-by:
Steven Rostedt <rostedt@goodmis.org> Reported-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Andrey Ryabinin authored
[ Upstream commit dad22328 ] Commit e41f501d ("vmlinux.lds: account for destructor sections") added '.text.exit' to EXIT_TEXT which is discarded at link time by default. This breaks compilation of UML: `.text.exit' referenced in section `.fini_array' of /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o): defined in discarded section `.text.exit' of /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o) Apparently UML doesn't want to discard exit text, so let's place all EXIT_TEXT sections in .exit.text. Fixes: e41f501d ("vmlinux.lds: account for destructor sections") Reported-by:
Stefan Traby <stefan@hello-penguin.com> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: <stable@vger.kernel.org> Acked-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Vincent Stehlé authored
[ Upstream commit c0082e98 ] An assertion in layout_in_gaps() verifies that the gap_lebs pointer is below the maximum bound. When computing this maximum bound the idx_lebs count is multiplied by sizeof(int), while C pointers arithmetic does take into account the size of the pointed elements implicitly already. Remove the multiplication to fix the assertion. Fixes: 1e51764a ("UBIFS: add new flash file system") Cc: <stable@vger.kernel.org> Signed-off-by:
Vincent Stehlé <vincent.stehle@intel.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Benjamin Coddington authored
[ Upstream commit a77ec83a ] The address of the iovec &vq->iov[out] is not guaranteed to contain the scsi command's response iovec throughout the lifetime of the command. Rather, it is more likely to contain an iovec from an immediately following command after looping back around to vhost_get_vq_desc(). Pass along the iovec entirely instead. Fixes: 79c14141 ("vhost/scsi: Convert completion path to use copy_to_iter") Cc: stable@vger.kernel.org Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit fae16989 ] Commit fe6b0dfa ("Input: tegra-kbc - use reset framework") accidentally converted _deassert to _assert, so there is no code to wake up this hardware. Fixes: fe6b0dfa ("Input: tegra-kbc - use reset framework") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Thierry Reding <treding@nvidia.com> Acked-by:
Laxman Dewangan <ldewangan@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Andrej Krutak authored
[ Upstream commit b027d112 ] The commit 02fc76f6 changed base of the sysfs attributes from device to card. The "show" callbacks dereferenced wrong objects because of this. Fixes: 02fc76f6 ('ALSA: line6: Create sysfs via snd_card_add_dev_attr()') Cc: <stable@vger.kernel.org> # v4.0+ Reviewed-by:
Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by:
Andrej Krutak <dev@andree.sk> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Andrej Krutak authored
[ Upstream commit adc8a43a ] Done, because line6_stream_stop() locks and calls line6_unlink_audio_urbs(), which in turn invokes audio_out_callback(), which tries to lock 2nd time. Fixes: ============================================= [ INFO: possible recursive locking detected ] 4.4.15+ #15 Not tainted --------------------------------------------- mplayer/3591 is trying to acquire lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa27655>] audio_out_callback+0x70/0x110 [snd_usb_line6] but task is already holding lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&line6pcm->out.lock)->rlock); lock(&(&line6pcm->out.lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by mplayer/3591: #0: (snd_pcm_link_rwlock){.-.-..}, at: [<bf8d49a7>] snd_pcm_stream_lock+0x1e/0x40 [snd_pcm] #1: (&(&substream->self_group.lock)->rlock){-.-...}, at: [<bf8d49af>] snd_pcm_stream_lock+0x26/0x40 [snd_pcm] #2: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] stack backtrace: CPU: 0 PID: 3591 Comm: mplayer Not tainted 4.4.15+ #15 Hardware name: Generic AM33XX (Flattened Device Tree) [<c0015d85>] (unwind_backtrace) from [<c001253d>] (show_stack+0x11/0x14) [<c001253d>] (show_stack) from [<c02f1bdf>] (dump_stack+0x8b/0xac) [<c02f1bdf>] (dump_stack) from [<c0076f43>] (__lock_acquire+0xc8b/0x1780) [<c0076f43>] (__lock_acquire) from [<c007810d>] (lock_acquire+0x99/0x1c0) [<c007810d>] (lock_acquire) from [<c06171e7>] (_raw_spin_lock_irqsave+0x3f/0x4c) [<c06171e7>] (_raw_spin_lock_irqsave) from [<bfa27655>] (audio_out_callback+0x70/0x110 [snd_usb_line6]) [<bfa27655>] (audio_out_callback [snd_usb_line6]) from [<c04294db>] (__usb_hcd_giveback_urb+0x53/0xd0) [<c04294db>] (__usb_hcd_giveback_urb) from [<c046388d>] (musb_giveback+0x3d/0x98) [<c046388d>] (musb_giveback) from [<c04647f5>] (musb_urb_dequeue+0x6d/0x114) [<c04647f5>] (musb_urb_dequeue) from [<c042ac11>] (usb_hcd_unlink_urb+0x39/0x98) [<c042ac11>] (usb_hcd_unlink_urb) from [<bfa26a87>] (line6_unlink_audio_urbs+0x6a/0x6c [snd_usb_line6]) [<bfa26a87>] (line6_unlink_audio_urbs [snd_usb_line6]) from [<bfa26acb>] (line6_stream_stop+0x42/0x5c [snd_usb_line6]) [<bfa26acb>] (line6_stream_stop [snd_usb_line6]) from [<bfa26fe7>] (snd_line6_trigger+0xb6/0xf4 [snd_usb_line6]) [<bfa26fe7>] (snd_line6_trigger [snd_usb_line6]) from [<bf8d47b7>] (snd_pcm_do_stop+0x36/0x38 [snd_pcm]) [<bf8d47b7>] (snd_pcm_do_stop [snd_pcm]) from [<bf8d462f>] (snd_pcm_action_single+0x22/0x40 [snd_pcm]) [<bf8d462f>] (snd_pcm_action_single [snd_pcm]) from [<bf8d46f9>] (snd_pcm_action+0xac/0xb0 [snd_pcm]) [<bf8d46f9>] (snd_pcm_action [snd_pcm]) from [<bf8d4b61>] (snd_pcm_drop+0x38/0x64 [snd_pcm]) [<bf8d4b61>] (snd_pcm_drop [snd_pcm]) from [<bf8d6233>] (snd_pcm_common_ioctl1+0x7fe/0xbe8 [snd_pcm]) [<bf8d6233>] (snd_pcm_common_ioctl1 [snd_pcm]) from [<bf8d6779>] (snd_pcm_playback_ioctl1+0x15c/0x51c [snd_pcm]) [<bf8d6779>] (snd_pcm_playback_ioctl1 [snd_pcm]) from [<bf8d6b59>] (snd_pcm_playback_ioctl+0x20/0x28 [snd_pcm]) [<bf8d6b59>] (snd_pcm_playback_ioctl [snd_pcm]) from [<c016714b>] (do_vfs_ioctl+0x3af/0x5c8) Fixes: 63e20df1 ('ALSA: line6: Reorganize PCM stream handling') Cc: <stable@vger.kernel.org> # v4.0+ Reviewed-by:
-
Andrej Krutak authored
[ Upstream commit 7e4379ea ] If there's an error, pcm is released in line6_pcm_acquire already. Fixes: 247d95ee ('ALSA: line6: Handle error from line6_pcm_acquire()') Cc: <stable@vger.kernel.org> # v4.0+ Reviewed-by:
-
Daniel Vetter authored
[ Upstream commit 6f00975c ] Somehow this one slipped through, which means drivers without modeset support can be oopsed (since those also don't call drm_mode_config_init, which means the crtc lookup will chase an uninitalized idr). Reported-by:
Alexander Potapenko <glider@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Helge Deller authored
[ Upstream commit 3eb53b20 ] When building gccgo in userspace, errno.h gets parsed and the go include file sysinfo.go is generated. Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED is defined later on in errno.h, this leads to go complaining that EREFUSED isn't defined yet. Fix this trivial problem by moving the define of EREFUSED down after ECONNREFUSED in errno.h (and clean up the indenting while touching this line). Signed-off-by:
Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Vineet Gupta authored
[ Upstream commit c57653dc ] Some module using div_u64() was failing to link because the libgcc 64-bit divide assist routine was not being exported for modules Reported-by: avinashp@quantenna.com Cc: stable@vger.kernel.org Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Vineet Gupta authored
[ Upstream commit 840c054f ] The syscall ABI includes the gcc functional calling ABI since a syscall implies userland caller and kernel callee. The current gcc ABI (v3) for ARCv2 ISA required 64-bit data be passed in even-odd register pairs, (potentially punching reg holes when passing such values as args). This was partly driven by the fact that the double-word LDD/STD instructions in ARCv2 expect the register alignment and thus gcc forcing this avoids extra MOV at the cost of a few unused register (which we have plenty anyways). This however was rejected as part of upstreaming gcc port to HS. So the new ABI v4 doesn't enforce the even-odd reg restriction. Do note that for ARCompact ISA builds v3 and v4 are practically the same in terms of gcc code generation. In terms of change management, we infer the new ABI if gcc 6.x onwards is used for building the kernel. This also needs a stable backport to enable older kernels to work with new tools/user-space Cc: <stable@vger.kernel.org> Signed-off-by:
-
Liav Rehana authored
[ Upstream commit 86147e3c ] User mode callee regs are explicitly collected before signal delivery or breakpoint trap. r25 is special for kernel as it serves as task pointer, so user mode value is clobbered very early. It is saved in pt_regs where generally only scratch (aka caller saved) regs are saved. The code to access the corresponding pt_regs location had a subtle bug as it was using load/store with scaling of offset, whereas the offset was already byte wise correct. So fix this by replacing LD.AS with a standard LD Cc: <stable@vger.kernel.org> Signed-off-by:
Liav Rehana <liavr@mellanox.com> Reviewed-by:
Alexey Brodkin <abrodkin@synopsys.com> [vgupta: rewrote title and commit log] Signed-off-by:
-
Vineet Gupta authored
[ Upstream commit 0d7b8855 ] Reported by Anton as LTP:munmap01 failing with Illegal Instruction Exception. --------------------->8-------------------------------------- mmap2(NULL, 24576, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0) = 0x200d2000 munmap(0x200d2000, 24576) = 0 --- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x200d2000} --- potentially unexpected fatal signal 4. Path: /munmap01 CPU: 0 PID: 61 Comm: munmap01 Not tainted 3.13.0-g5d5c46d9a556 #8 task: 9f1a8000 ti: 9f154000 task.ti: 9f154000 [ECR ]: 0x00020100 => Illegal Insn [EFA ]: 0x0001354c [BLINK ]: 0x200515d4 [ERET ]: 0x1354c @off 0x1354c in [/munmap01] VMA: 0x00010000 to 0x00018000 [STAT32]: 0x800802c0 ... --------------------->8-------------------------------------- The issue was 1. munmap01 accessed unmapped memory (on purpose) with signal handler installed for SIGSEGV 2. The faulting instruction happened to be in Delay Slot 00011864 <main>: 11908: bl.d 13284 <tst_resm> 1190c: stb r16,[r2] 3. kernel sets up the reg file for signal handler and correctly clears the DE bit in pt_regs->status32 placeholder 4. However RESTORE_CALLEE_SAVED_USER macro is not adjusted for ARCv2, and it over-writes the above with orig/stale value of status32 5. After RTIE, userspace signal handler executes a non branch instruction with DE bit set, triggering Illegal Instruction Exception. Reported-by:
Anton Kolesov <akolesov@synopsys.com> Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit 47af45d6 ] The commit 40974618 ("Input: i8042 - break load dependency ...") correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do the same for AUX port(s), which results in communication on KBD and AUX ports to clash with each other. Fixes: 40974618 ("Input: i8042 - break load dependency ...") Reported-by:
Bruno Wolff III <bruno@wolff.to> Tested-by:
-
Christian König authored
[ Upstream commit 13f479b9 ] This bug seems to be present for a very long time. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 2527ecc9 ] The UserMode (UM) Linux build was failing in gpiolib-of as it requires ioremap()/iounmap() to exist, which is absent from UM. The non-existence of IO memory is negatively defined as CONFIG_NO_IOMEM which means we need to depend on HAS_IOMEM. Cc: stable@vger.kernel.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Kent Overstreet authored
[ Upstream commit acc9cf8c ] This patch fixes a cachedev registration-time allocation deadlock. This can deadlock on boot if your initrd auto-registeres bcache devices: Allocator thread: [ 720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds. [ 720.732361] [<ffffffff816eeac7>] schedule+0x37/0x90 [ 720.732963] [<ffffffffa05192b8>] bch_bucket_alloc+0x188/0x360 [bcache] [ 720.733538] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0 [ 720.734137] [<ffffffffa05302bd>] bch_prio_write+0x19d/0x340 [bcache] [ 720.734715] [<ffffffffa05190bf>] bch_allocator_thread+0x3ff/0x470 [bcache] [ 720.735311] [<ffffffff816ee41c>] ? __schedule+0x2dc/0x950 [ 720.735884] [<ffffffffa0518cc0>] ? invalidate_buckets+0x980/0x980 [bcache] Registration thread: [ 720.710403] INFO: task bash:3531 blocked for more than 120 seconds. [ 720.715226] [<ffffffff816eeac7>] schedule+0x37/0x90 [ 720.715805] [<ffffffffa05235cd>] __bch_btree_map_nodes+0x12d/0x150 [bcache] [ 720.716409] [<ffffffffa0522d30>] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache] [ 720.717008] [<ffffffffa05236e4>] bch_btree_insert+0xf4/0x170 [bcache] [ 720.717586] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0 [ 720.718191] [<ffffffffa0527d9a>] bch_journal_replay+0x14a/0x290 [bcache] [ 720.718766] [<ffffffff810cc90d>] ? ttwu_do_activate.constprop.94+0x5d/0x70 [ 720.719369] [<ffffffff810cf684>] ? try_to_wake_up+0x1d4/0x350 [ 720.719968] [<ffffffffa05317d0>] run_cache_set+0x580/0x8e0 [bcache] [ 720.720553] [<ffffffffa053302e>] register_bcache+0xe2e/0x13b0 [bcache] [ 720.721153] [<ffffffff81354cef>] kobj_attr_store+0xf/0x20 [ 720.721730] [<ffffffff812a2dad>] sysfs_kf_write+0x3d/0x50 [ 720.722327] [<ffffffff812a225a>] kernfs_fop_write+0x12a/0x180 [ 720.722904] [<ffffffff81225177>] __vfs_write+0x37/0x110 [ 720.723503] [<ffffffff81228048>] ? __sb_start_write+0x58/0x110 [ 720.724100] [<ffffffff812cedb3>] ? security_file_permission+0x23/0xa0 [ 720.724675] [<ffffffff812258a9>] vfs_write+0xa9/0x1b0 [ 720.725275] [<ffffffff8102479c>] ? do_audit_syscall_entry+0x6c/0x70 [ 720.725849] [<ffffffff81226755>] SyS_write+0x55/0xd0 [ 720.726451] [<ffffffff8106a390>] ? do_page_fault+0x30/0x80 [ 720.727045] [<ffffffff816f2cae>] system_call_fastpath+0x12/0x71 The fifo code in upstream bcache can't use the last element in the buffer, which was the cause of the bug: if you asked for a power of two size, it'd give you a fifo that could hold one less than what you asked for rather than allocating a buffer twice as big. Signed-off-by:
Kent Overstreet <kent.overstreet@gmail.com> Tested-by:
Eric Wheeler <bcache@linux.ewheeler.net> Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Wheeler authored
[ Upstream commit d9dc1702 ] register_cache() is supposed to return an error string on error so that register_bcache() will will blkdev_put and cleanup other user counters, but it does not set 'char *err' when cache_alloc() fails (eg, due to memory pressure) and thus register_bcache() performs no cleanup. register_bcache() <----------\ <- no jump to err_close, no blkdev_put() | | +->register_cache() | <- fails to set char *err | | +->cache_alloc() ---/ <- returns error This patch sets `char *err` for this failure case so that register_cache() will cause register_bcache() to correctly jump to err_close and do cleanup. This was tested under OOM conditions that triggered the bug. Signed-off-by:
-
Christian König authored
[ Upstream commit ae5b80d2 ] Looks like some RV6xx have problems with that. bug: https://bugs.freedesktop.org/show_bug.cgi?id=97099Reviewed-by:
-
Christian König authored
[ Upstream commit 9ef8537e ] Seems to cause problems for some older hardware. Kudos to Thom Kouwenhoven for working a lot with the PLLs and figuring this out. Reviewed-by:
-
Oleg Nesterov authored
[ Upstream commit 6c4687cc ] __replace_page() wronlgy calls mem_cgroup_cancel_charge() in "success" path, it should only do this if page_check_address() fails. This means that every enable/disable leads to unbalanced mem_cgroup_uncharge() from put_page(old_page), it is trivial to underflow the page_counter->count and trigger OOM. Reported-and-tested-by:
Brenden Blanco <bblanco@plumgrid.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reviewed-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: stable@vger.kernel.org # 3.17+ Fixes: 00501b53 ("mm: memcontrol: rewrite charge API") Link: http://lkml.kernel.org/r/20160817153629.GB29724@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 1b856086 ] blk_set_queue_dying() can be called while another thread is submitting I/O or changing queue flags, e.g. through dm_stop_queue(). Hence protect the QUEUE_FLAG_DYING flag change with locking. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Christoph Huber authored
[ Upstream commit 3e103a65 ] commit cbaadf0f ("ASoC: atmel_ssc_dai: refactor the startup and shutdown") refactored code such that the SSC is reset on every startup; this breaks duplex audio (e.g. first start audio playback, then start record, causing the playback to stop/hang) Fixes: cbaadf0f (ASoC: atmel_ssc_dai: refactor the startup and shutdown) Signed-off-by:
Christoph Huber <c.huber@bct-electronic.com> Signed-off-by:
Peter Meerwald-Stadler <p.meerwald@bct-electronic.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 45c3b08a ] For resources shared by all cores such as SLC and IOC, only the master core needs to do any setups / enabling / disabling etc. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 18b43e89 ] trace_hardirqs_on_caller() in lockdep.c expects to be called before, not after interrupts are actually enabled. The following comment in kernel/locking/lockdep.c substantiates this claim: " /* * We're enabling irqs and according to our state above irqs weren't * already enabled, yet we find the hardware thinks they are in fact * enabled.. someone messed up their IRQ state tracing. */ " An example can be found in include/linux/irqflags.h: do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0) Without this change, we hit the following DEBUG_LOCKS_WARN_ON. [ 7.760000] ------------[ cut here ]------------ [ 7.760000] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2711 resume_user_mode_begin+0x48/0xf0 [ 7.770000] DEBUG_LOCKS_WARN_ON(!irqs_disabled()) [ 7.780000] Modules linked in: [ 7.780000] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-00003-gc668bb9-dirty #366 [ 7.790000] [ 7.790000] Stack Trace: [ 7.790000] arc_unwind_core.constprop.1+0xa4/0x118 [ 7.800000] warn_slowpath_fmt+0x72/0x158 [ 7.800000] resume_user_mode_begin+0x48/0xf0 [ 7.810000] ---[ end trace 6f6a7a8fae20d2f0 ]--- Signed-off-by:
Daniel Mentz <danielmentz@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jim Lin authored
[ Upstream commit 88716a93 ] After a device is disconnected, xhci_stop_device() will be invoked in xhci_bus_suspend(). Also the "disconnect" IRQ will have ISR to invoke xhci_free_virt_device() in this sequence. xhci_irq -> xhci_handle_event -> handle_cmd_completion -> xhci_handle_cmd_disable_slot -> xhci_free_virt_device If xhci->devs[slot_id] has been assigned to NULL in xhci_free_virt_device(), then virt_dev->eps[i].ring in xhci_stop_device() may point to an invlid address to cause kernel panic. virt_dev = xhci->devs[slot_id]; : if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) [] Unable to handle kernel paging request at virtual address 00001a68 [] pgd=ffffffc001430000 [] [00001a68] *pgd=000000013c807003, *pud=000000013c807003, *pmd=000000013c808003, *pte=0000000000000000 [] Internal error: Oops: 96000006 [#1] PREEMPT SMP [] CPU: 0 PID: 39 Comm: kworker/0:1 Tainted: G U [] Workqueue: pm pm_runtime_work [] task: ffffffc0bc0e0bc0 ti: ffffffc0bc0ec000 task.ti: ffffffc0bc0ec000 [] PC is at xhci_stop_device.constprop.11+0xb4/0x1a4 This issue is found when running with realtek ethernet device (0bda:8153). Signed-off-by:
Jim Lin <jilin@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mathias Nyman authored
[ Upstream commit 33be1265 ] Fix "Command completion event does not match command" errors by always handling the command ring stopped events. The command ring stopped event is generated as a result of aborting or stopping the command ring with a register write. It is not caused by a command in the command queue, and thus won't have a matching command in the comman list. Solve it by handling the command ring stopped event before checking for a matching command. In most command time out cases we abort the command ring, and get a command ring stopped event. The events command pointer will point at the current command ring dequeue, which in most cases matches the timed out command in the command list, and no error messages are seen. If we instead get a command aborted event before the command ring stopped event, the abort event will increse the command ring dequeue pointer, and the following command ring stopped events command pointer will point at the next, not yet queued command. This case triggered the error message Signed-off-by:
-
Gavin Li authored
[ Upstream commit add12505 ] This fixes the "BOGUS urb xfer" warning logged by usb_submit_urb(). Signed-off-by:
Gavin Li <git@thegavinli.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Lu Baolu authored
[ Upstream commit 53958751 ] In sg_timeout(), req->status is set to "-ETIMEDOUT" before calling into usb_sg_cancel(). usb_sg_cancel() will do nothing and return directly if req->status has been set to a non-zero value. This will cause driver hang whenever transfer time out is triggered. This patch fixes this issue. It could be backported to stable kernel with version later than v3.15. Cc: stable@vger.kernel.org # 3.15+ Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by:
-
