Now that enum and mixer kcontrols are freed by resource management
framework, removing kcontrol becomes one function call, so simplify code
in remove_widget.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-7-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

After changing memory management to resource managed one, some of the
functions became no ops, remove them as they are no longer needed.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-6-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

In order for topology to be resource managed, change all allocations to
be resource managed:
k*alloc -> devm_k*alloc
kstrdup -> devm_kstrdup

Exceptions where non resource managed allocation is left is
soc_tplg_dapm_widget_create(), as it uses pointer to memory locally and
frees it up after use, as well as soc_tplg_dapm_graph_elems_load(),
which has temporary pointer to table of routes.

After conversion all redundant calls in error and clean up paths were
removed.

Also removed some variables which become unneeded when there is no calls
using them.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-5-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

In few places tplg->comp->dev is used, while everywhere else tplg->dev
is being used. Unify those uses towards tplg->dev, as it is being set to
comp->dev during initialization anyway.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-4-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

In theory topology can be loaded in multiple steps by providing index to
snd_soc_tplg_component_load, however, from usability point of view it
doesn't make sense, as can be seen from all current users loading
topology in one go. Remove the unnecessary parameter.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-3-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Topology API exposes snd_soc_tplg_widget_remove and
snd_soc_tplg_widget_remove_all, but both are nowhere used. All current
users load and unload topology as a whole. As following commits
introduce resource managed memory, remove them to simplify code and
reduce maintenance burden.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-2-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201101160312.2296146-1-trix@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

This code is correct, but it should be indented one more tab.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201103101853.GD1127762@mwandaSigned-off-by: Mark Brown <broonie@kernel.org>

A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20201101172412.2306144-1-trix@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

davinci_mcasp_get_dt_params alway return zero, and its return value
could be ignored by the caller. So make it 'void' type to avoid the
check its return value.

Fixes: 764958f2 ("ASoC: ti: davinci-mcasp: Support for auxclk-fs-ratio")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201102103428.32678-1-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201101171742.2304458-1-trix@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Besides the fact that muxclk is optional, muxclk can be set using
assigned-clocks, removing the need to set it in driver. The warning is
thus unneeded, so we can transform it in a debug print, eventually to just
reflect that muxclk was not set by the driver.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201103100554.1307190-1-codrin.ciubotariu@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>

A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201101171943.2305030-1-trix@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Because clk_disable_unprepare() already checked NULL clock parameter,
so the additional check is unnecessary, just remove it.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201029082513.28233-1-vulab@iscas.ac.cnSigned-off-by: Mark Brown <broonie@kernel.org>

A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201101160037.2295512-1-trix@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

First patch adds tdm 4-slot 100fs DAI setting to avoid jitter of using
64fs on CML boards. Second patch is a DMI quirk for HP Dooly.

Changes since v1:
-Add comment on Dooly's DMI quirk

Brent Lu (2):
  ASoC: intel: sof_rt5682: Add support for cml_rt1015_rt5682
  ASoC: intel: sof_rt5682: Add quirk for Dooly

 sound/soc/intel/boards/sof_rt5682.c           | 65 +++++++++++++++++--
 .../intel/common/soc-acpi-intel-cml-match.c   | 13 ++++
 2 files changed, 73 insertions(+), 5 deletions(-)

--
2.17.1

This DMI product family string of this board is "Google_Hatch" so the
DMI quirk will take place. However, this board is using rt1015 speaker
amp instead of max98357a specified in the quirk. Therefore, we need an
new DMI quirk for this board.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201030170559.20370-3-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds the driver data and updates quirk info for cml with
rt1015 speaker amp and rt5682 headset codec. Due to different mclk
frequency on JSL and CML, we need to use 4 slot TDM 100fs to avoid
the SSP m/n counter.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201030170559.20370-2-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Like A83T the Allwinner H3 doesn't have the DMA reception available for
some audio interfaces.

As it's already documented for A83T convert this to an enum and add the H3
interface.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-15-peron.clem@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

H6 I2S is very similar to H3, except that it supports up to 16 channels
and thus few registers have fields on different position.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-11-peron.clem@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Checkpatch script produces warning:
WARNING: function definition argument 'const struct sun4i_i2s *'
should also have an identifier name.

Let's fix this by adding identifier name to get_bclk_parent_rate()
and set_fmt() callback definition.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-10-peron.clem@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Because SUN4I_I2S_FIFO_CTRL_REG is volatile, writes done while the
regmap is cache-only are ignored. To work around this, move the
configuration to a callback that runs while the ASoC core has a
runtime PM reference to the device.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-9-peron.clem@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The FIFO TX reg is volatile and sun8i i2s register
mapping is different from sun4i.

Even if in this case it's doesn't create an issue,
Avoid setting some regs that are undefined in sun8i.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-8-peron.clem@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Extend the functionality of the driver to include support of 20 and
24 bits per sample.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-7-peron.clem@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

On the newer SoCs such as the H3 and A64 this is set by default
to transfer a 0 after each sample in each slot. However the A10
and A20 SoCs that this driver was developed on had a default
setting where it padded the audio gain with zeros.

This isn't a problem while we have only support for 16bit audio
but with larger sample resolution rates in the pipeline then SEXT
bits should be cleared so that they also pad at the LSB. Without
this the audio gets distorted.

Set sign extend sample for all the sunxi generations even if they
are not affected. This will keep consistency and avoid relying on
default.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-6-peron.clem@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

We are actually using a complex formula to just return a bunch of
simple values. Also this formula is wrong for sun4i when calling
get_wss() the function return 4 instead of 3.

Replace this with a simpler switch case.

Also drop the i2s params which is unused and return a simple int as
returning an error code could be out of range for an s8 and there is
no optim to return a s8 here.

Fixes: 619c15f7 ("ASoC: sun4i-i2s: Change SR and WSS computation")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-5-peron.clem@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

H6 I2S is very similar to that in H3, except it supports up to 16
channels.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-4-peron.clem@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

As slots and slot_width can be set manually using set_tdm().
These values are then kept in sun4i_i2s struct.
So we need to check if these values are set or not.

This is not done actually and will trigger a bug.
For example, if we set to the simple soundcard in the device-tree
dai-tdm-slot-width = <32> and then start a stream using S16_LE,
currently we would calculate BCLK for 32-bit slots, but program
lrck_period for 16-bit slots, making the sample rate double what we
expected.

To fix this, we need to check if these values are set or not but as
this logic is already done by the caller. Avoid duplicating this
logic and just pass the required values as params to set_chan_cfg().
Suggested-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Link: https://lore.kernel.org/r/20201030144648.397824-3-peron.clem@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Left and Right justified mode are computed using the same formula
as DSP_A and DSP_B mode.
Which is wrong and the user manual explicitly says:

LRCK_PERDIOD:
PCM Mode: Number of BCLKs within (Left + Right) channel width.
I2S/Left-Justified/Right-Justified Mode: Number of BCLKs within each
individual channel width(Left or Right)

Fix this by using the same formula as the I2S mode.

Fixes: 7ae7834e ("ASoC: sun4i-i2s: Add support for DSP formats")
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201030144648.397824-2-peron.clem@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Make tegra20-spdif default to N as all other drivers do.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Fixes: 774fec33 ("ASoC: Tegra: Implement SPDIF CPU DAI")
Link: https://lore.kernel.org/r/8756eb5aac561173aa222c9cb64dd314ab1b1f9b.1603925200.git.mirq-linux@rere.qmqm.plSigned-off-by: Mark Brown <broonie@kernel.org>

Update compatible string as board compatible and device compatible
should not be same!. Make the driver inline with the new bindings.

Fixes: aa2e2785 ("ASoC: qcom: sm8250: add sound card qrb5165-rb5 support")
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201029101550.31695-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Update compatible string as board compatible and device compatible
should not be same!. New compatible is now suffixed with -sndcard
to be inline with other Qualcomm Sound cards.

This also fixes the warnings/error reported by dt_binding_check.

Fixes: 765c3759 ("ASoC: qcom: dt-bindings: Add SM8250 sound card bindings")
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201029101550.31695-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The check for an error return from the call to snd_pcm_format_width
is never true as the unsigned int bitwidth can never be less than
zero. Fix this by making bitwidth an int.

Fixes: 7cb37b7b ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201028115112.109017-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Static analysis Coverity had detected a potential array out-of-bounds
write issue due to the fact that MAX AFE port Id was set to 16 instead
of using AFE_PORT_MAX macro.

Fix this by properly using AFE_PORT_MAX macro.

Fixes: aa2e2785 ("ASoC: qcom: sm8250: add sound card qrb5165-rb5 support")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201028142001.22431-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "Add documentation and machine driver for SC7180 sound card" from Cheng-Yi Chiang <cychiang@chromium.org>:

Note:
- The machine driver patch is made by the collaboration of
  Cheng-Yi Chiang <cychiang@chromium.org>
  Rohit kumar <rohitkr@codeaurora.org>
  Ajit Pandey <ajitp@codeaurora.org>
  But Ajit has left codeaurora.

Changes from v1 to v2:
- Ducumentation: Addressed all suggestions from Doug.
- Machine driver:
  - Fix comment style for license.
  - Sort includes.
  - Remove sc7180_snd_hw_params.
  - Remove sc7180_dai_init and use aux device instead for headset jack registration.
  - Statically define format for Primary MI2S.
  - Atomic is not a concern because there is mutex in card to make sure
    startup and shutdown happen sequentially.
  - Fix missing return -EINVAL in startup.
  - Use static sound card.
  - Use devm_kzalloc to avoid kfree.

Changes from v2 to v3:
- Ducumentation: Addressed suggestions from Srini.
- Machine driver:
  - Reuse qcom_snd_parse_of to parse properties.
  - Remove playback-only and capture-only.
  - Misc fixes to address comments.

Changes from v3 to v4:
- Ducumentation: Addressed suggestions from Rob.
 - Remove definition of dai.
 - Use 'sound-dai: true' for sound-dai schema.
 - Add reg property to pass 'make dt_binding_check' check although reg is not used in the driver.
- Machine driver:
 - Add Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>

Changes from v4 to v5:
- Documentation: Addressed suggestions from Rob.
 - Add definition for "#address-cells" and "#size-cells".
 - Add additionalProperties: false
 - Add required properties.

Changes from v5 to v6:
- Documentation: Addressed suggestions from Rob.
 - Drop contains in compatible strings.
 - Only allow dai-link@[0-9]
 - Remove reg ref since it has a type definition already.

Changes from v6 to v7
- Documentation:
  - Add headset-jack and hdmi-jack to specify the codec
    responsible for jack detection.
- HDMI codec driver:
  - Use component set_jack ops instead of exporting hdmi_codec_set_jack_detect.
- Machine driver:
  - Removed aux device following Stephan's suggestion.
  - Use headset-jack and hdmi-jack to specify the codec
    responsible for jack detection.
  - Add support for HDMI(actually DP) playback.

Changes from v7 to v8
- Documentation:
  - Remove headset-jack and hdmi-jack.
- Machine driver:
  - Let machine driver decide whether there is a jack on the DAI.

Changes from v8 to v9
- hdmi-codec driver:
  - Fixed the naming.
- Machine driver:
  - Fixed unused fields.
  - Moved snd_soc_card_set_drvdata
  - Keep the naming of HDMI as dai name until v5 of lpass-hdmi patches.

Changes from v9 to v10
- Documentation:
  - Let compatible string be more specific for board configuration to allow
    for future changes.
- Machine driver:
  - Fixed unused include and macro.
  - Add temporary macro SC7180_LPASS_DP for future change in sc7180-lpass.h.
  - Let sound card be dynamically allocated.
  - Change compatible string accordingly.

Changes from v10 to v11
- Machine driver:
  - Use temporary macro LPASS_DP_RX for future change in sc7180-lpass.h.

Changes from v11 to v12
- Documentation:
 - Change the file and title name for new compatible string google,sc7180-trogdor.
 - Change the example of model name.
- Machine driver:
 - Use the definitaion of index LPASS_DP_RX in sc7180-lpass.h.
 - Fix for compatible string.
 - Replace a comma with semicolon.

Ajit Pandey (1):
  ASoC: qcom: sc7180: Add machine driver for sound card registration

Cheng-Yi Chiang (1):
  ASoC: google: dt-bindings: Add sc7180-trogdor machine bindings

 .../bindings/sound/google,sc7180-trogdor.yaml | 130 +++++++++
 sound/soc/qcom/Kconfig                        |  12 +
 sound/soc/qcom/Makefile                       |   2 +
 sound/soc/qcom/sc7180.c                       | 266 ++++++++++++++++++
 4 files changed, 410 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
 create mode 100644 sound/soc/qcom/sc7180.c

--
2.29.0.rc2.309.g374f81d7ae-goog

make use of devm_of_platform_populate to remove some redundant code!
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201027111526.12326-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add new driver to register sound card on sc7180 trogdor board and
do the required configuration for lpass cpu dai and external codecs
connected over MI2S interfaces.
Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201027032234.1705835-3-cychiang@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add devicetree bindings documentation file for sc7180 sound card.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201027032234.1705835-2-cychiang@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Series with multiple code cleanups, plus one fix to remove
unnecessary kernel warnings related to firmware loading.

Bard Liao (1):
  ASoC: SOF: loader: handle all SOF_IPC_EXT types

Pierre-Louis Bossart (3):
  ASoC: SOF: control: remove const in sizeof()
  ASoC: SOF: topology: remove const in sizeof()
  ASoC: SOF: sof-audio: remove goto used for force-nocodec support

 sound/soc/sof/control.c   | 20 ++++++++++----------
 sound/soc/sof/loader.c    |  5 +++++
 sound/soc/sof/sof-audio.c | 10 +++-------
 sound/soc/sof/topology.c  |  2 +-
 4 files changed, 19 insertions(+), 18 deletions(-)

--
2.27.0

Viorel Suman <viorel.suman@nxp.com>:

From: Viorel Suman <viorel.suman@nxp.com>

DAI driver for new XCVR IP found in i.MX8MP.

Viorel Suman (2):
  ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver
  ASoC: dt-bindings: fsl_xcvr: Add document for XCVR

Changes since v1:
 - improved 6- and 12-ch layout comment
 - used regmap polling function, improved
   clocks handling in runtime_resume
 - added FW size check in FW load function,
   improved IRQ handler, removed dummy IRQ handlers
 - fixed yaml file

Changes since v2:
 - used devm_reset_control_get_exclusive instead of of_reset_control_get
 - moved reset_control_assert into runtime_suspend

Changes since v3:
 - removed "firmware-name" DTS property from both documentation and
   source code by porting it into SoC specific 'compatible' data structure.

 .../devicetree/bindings/sound/fsl,xcvr.yaml   |  104 ++
 sound/soc/fsl/Kconfig                         |   10 +
 sound/soc/fsl/Makefile                        |    2 +
 sound/soc/fsl/fsl_xcvr.c                      | 1359 +++++++++++++++++
 sound/soc/fsl/fsl_xcvr.h                      |  266 ++++
 5 files changed, 1741 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
 create mode 100644 sound/soc/fsl/fsl_xcvr.c
 create mode 100644 sound/soc/fsl/fsl_xcvr.h

--
2.26.2