- 26 Jun, 2006 40 commits
-
-
Jon Mason authored
swiotlb relies on the gart specific iommu_aperture variable to know if we discovered a hardware IOMMU before swiotlb initialization. Introduce iommu_detected to do the same thing, but in a HW IOMMU neutral manner, in preparation for adding the Calgary HW IOMMU. Signed-Off-By:
Muli Ben-Yehuda <muli@il.ibm.com> Signed-Off-By:
Jon Mason <jdmason@us.ibm.com> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Rohit Seth authored
Minor cleanup patch: Replacing the asm statement with cpuid_count macro(which already provides the same functionality). Signed-off-by:
Rohit Seth <rohitseth@google.com> Signed-off-by:
-
Jan Beulich authored
Use abstractions whenever possible. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Andi Kleen authored
pud_offset_k() equivalent to pud_offset() now. Pointed out by Jan Beulich Similar for __pud_offset_ok, which needs a small change in the callers. Signed-off-by:
-
Carl-Daniel Hailfinger authored
Clean up arch/{i386,x86_64}/boot/compressed/misc.c a bit to reduce their differences. Should have zero effect on code generation. Signed-off-by:Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by:
-
Jan Beulich authored
Add proper conditionals to be able to build with CONFIG_MODULES=n. Signed-off-by:
-
Jan Beulich authored
If no unwinding is possible at all for a certain exception instance, fall back to the old style call trace instead of not showing any trace at all. Also, allow setting the stack trace mode at the command line. Signed-off-by:
-
Jan Beulich authored
To increase the usefulness of reliable stack unwinding, this adds CFI unwind annotations to many low-level i386 routines. Signed-off-by:
-
Jan Beulich authored
These are the i386-specific pieces to enable reliable stack traces. This is going to be even more useful once CFI annotations get added to he assembly code, namely to entry.S. Signed-off-by:
-
Jan Beulich authored
Adjust the CFA offset for 64- and 32-bit syscall entries so that the five slots pre-subtracted from the stack pointer do not appear to reside outside of the current frame. Signed-off-by:
-
Jan Beulich authored
Change the switching to/from the IRQ stack so that unwind annotations can be added for it without requiring CFA expressions. AK: I cleaned it up a bit, making it unconditional and removing the obsolete DEBUG_INFO full frame code. Signed-off-by:
-
Jan Beulich authored
These are the x86_64-specific pieces to enable reliable stack traces. The only restriction with this is that it currently cannot unwind across the interrupt->normal stack boundary, as that transition is lacking proper annotation. Signed-off-by:
-
Jan Beulich authored
These are the generic bits needed to enable reliable stack traces based on Dwarf2-like (.eh_frame) unwind information. Subsequent patches will enable x86-64 and i386 to make use of this. Thanks to Andi Kleen and Ingo Molnar, who pointed out several possibilities for improvement. Signed-off-by:
-
bibo,mao authored
In x86_64 architecture, if device driver with msi function gets 0xee vector by assign_irq_vector() function, system will crash if this interrupt happens. It is because 0xee interrupt entry is empty. This patch modifies this. This patch is based on 2.6.17-rc6. Signed-off-by:
-
Andi Kleen authored
- Rename the GART_IOMMU option to IOMMU to make clear it's not just for AMD - Rewrite the help text to better emphatise this fact - Make it an embedded option because too many people get it wrong. To my astonishment I discovered the aacraid driver tests this symbol directly. This looks quite broken to me - it's an internal implementation detail of the PCI DMA API. Can the maintainer please clarify what this test was intended to do? Cc: linux-scsi@vger.kernel.org Cc: alan@redhat.com Cc: markh@osdl.org Signed-off-by:
-
Andi Kleen authored
Previously it would only work in the first 32bit system call, not during early process setup. Signed-off-by:
-
Ingo Molnar authored
Fix a potential deadlock scenario introduced by io_apic.c's new vector_lock on i386 and x86_64. Found by the locking correctness validator. The patch was boot-tested on x86. For details of the deadlock scenario, see the validator output: ====================================================== [ BUG: hard-safe -> hard-unsafe lock order detected! ] ------------------------------------------------------ idle/1 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (msi_lock){....}, at: [<c04ff8d2>] startup_msi_irq_wo_maskbit+0x10/0x35 and this task is already holding: (&irq_desc[i].lock){++..}, at: [<c015b924>] probe_irq_on+0x36/0x107 which would create a new lock dependency: (&irq_desc[i].lock){++..} -> (msi_lock){....} but this new dependency connects a hard-irq-safe lock: (&irq_desc[i].lock){++..} ... which became hard-irq-safe at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10485e9>] _spin_lock+0x21/0x2f [<c015aff5>] __do_IRQ+0x3d/0x113 [<c01062d3>] do_IRQ+0x8c/0xad to a hard-irq-unsafe lock: (vector_lock){--..} ... which became hard-irq-unsafe at: ... [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10485e9>] _spin_lock+0x21/0x2f [<c011b5e8>] assign_irq_vector+0x34/0xc8 [<c1aa82fa>] setup_IO_APIC+0x45a/0xcff [<c1aa56e3>] smp_prepare_cpus+0x5ea/0x8aa [<c010033f>] init+0x32/0x2cb [<c0102005>] kernel_thread_helper+0x5/0xb which could potentially lead to deadlocks! other info that might help us debug this: 3 locks held by idle/1: #0: (port_mutex){--..}, at: [<c067070d>] uart_add_one_port+0x61/0x289 #1: (&state->mutex){--..}, at: [<c067071f>] uart_add_one_port+0x73/0x289 #2: (&irq_desc[i].lock){++..}, at: [<c015b924>] probe_irq_on+0x36/0x107 the hard-irq-safe lock's dependencies: -> (&irq_desc[i].lock){++..} ops: 9861 { initial-use at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a [<c015b415>] setup_irq+0x9b/0x14d [<c1aaa4c4>] time_init_hook+0xf/0x11 [<c1a9f320>] time_init+0x44/0x46 [<c1a9955f>] start_kernel+0x191/0x38f [<c0100210>] 0xc0100210 in-hardirq-W at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10485e9>] _spin_lock+0x21/0x2f [<c015aff5>] __do_IRQ+0x3d/0x113 [<c01062d3>] do_IRQ+0x8c/0xad in-softirq-W at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10485e9>] _spin_lock+0x21/0x2f [<c015aff5>] __do_IRQ+0x3d/0x113 [<c01062d3>] do_IRQ+0x8c/0xad } ... key at: [<c1ea31e0>] irq_desc_lock_type+0x0/0x20 -> (i8259A_lock){++..} ops: 5149 { initial-use at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a [<c0108090>] init_8259A+0x11/0x8f [<c1aa0d22>] init_ISA_irqs+0x12/0x4d [<c1aaa4f0>] pre_intr_init_hook+0x8/0xa [<c1aa0cb9>] init_IRQ+0xe/0x65 [<c1a99546>] start_kernel+0x178/0x38f [<c0100210>] 0xc0100210 in-hardirq-W at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a [<c0107fb0>] mask_and_ack_8259A+0x1b/0xcc [<c015b007>] __do_IRQ+0x4f/0x113 [<c01062d3>] do_IRQ+0x8c/0xad in-softirq-W at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a [<c0107fb0>] mask_and_ack_8259A+0x1b/0xcc [<c015b007>] __do_IRQ+0x4f/0x113 [<c01062d3>] do_IRQ+0x8c/0xad } ... key at: [<c142f174>] i8259A_lock+0x14/0x40 ... acquired at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a [<c0107eb2>] enable_8259A_irq+0x10/0x47 [<c0107f12>] startup_8259A_irq+0x8/0xc [<c015b45e>] setup_irq+0xe4/0x14d [<c1aaa4c4>] time_init_hook+0xf/0x11 [<c1a9f320>] time_init+0x44/0x46 [<c1a9955f>] start_kernel+0x191/0x38f [<c0100210>] 0xc0100210 -> (ioapic_lock){+...} ops: 122 { initial-use at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a [<c1aa71db>] io_apic_get_version+0x16/0x55 [<c1aa5c73>] mp_register_ioapic+0xc6/0x127 [<c1aa382e>] acpi_parse_ioapic+0x2d/0x39 [<c1abe031>] acpi_table_parse_madt_family+0xb4/0x100 [<c1abe093>] acpi_table_parse_madt+0x16/0x18 [<c1aa3c8a>] acpi_boot_init+0x132/0x251 [<c1aa08ea>] setup_arch+0xd36/0xe37 [<c1a99434>] start_kernel+0x66/0x38f [<c0100210>] 0xc0100210 in-hardirq-W at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a [<c011bce1>] mask_IO_APIC_irq+0x11/0x31 [<c011c5cc>] ack_edge_ioapic_vector+0x31/0x41 [<c015b007>] __do_IRQ+0x4f/0x113 [<c01062d3>] do_IRQ+0x8c/0xad } ... key at: [<c1432514>] ioapic_lock+0x14/0x3c -> (i8259A_lock){++..} ops: 5149 { initial-use at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a [<c0108090>] init_8259A+0x11/0x8f [<c1aa0d22>] init_ISA_irqs+0x12/0x4d [<c1aaa4f0>] pre_intr_init_hook+0x8/0xa [<c1aa0cb9>] init_IRQ+0xe/0x65 [<c1a99546>] start_kernel+0x178/0x38f [<c0100210>] 0xc0100210 in-hardirq-W at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a [<c0107fb0>] mask_and_ack_8259A+0x1b/0xcc [<c015b007>] __do_IRQ+0x4f/0x113 [<c01062d3>] do_IRQ+0x8c/0xad in-softirq-W at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a [<c0107fb0>] mask_and_ack_8259A+0x1b/0xcc [<c015b007>] __do_IRQ+0x4f/0x113 [<c01062d3>] do_IRQ+0x8c/0xad } ... key at: [<c142f174>] i8259A_lock+0x14/0x40 ... acquired at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a [<c0107e6b>] disable_8259A_irq+0x10/0x47 [<c011bdbd>] startup_edge_ioapic_vector+0x31/0x58 [<c015b45e>] setup_irq+0xe4/0x14d [<c015b5a1>] request_irq+0xda/0xf9 [<c1ac983a>] rtc_init+0x6a/0x1a7 [<c0100457>] init+0x14a/0x2cb [<c0102005>] kernel_thread_helper+0x5/0xb ... acquired at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a [<c011bce1>] mask_IO_APIC_irq+0x11/0x31 [<c011c5cc>] ack_edge_ioapic_vector+0x31/0x41 [<c015b007>] __do_IRQ+0x4f/0x113 [<c01062d3>] do_IRQ+0x8c/0xad the hard-irq-unsafe lock's dependencies: -> (vector_lock){--..} ops: 31 { initial-use at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10485e9>] _spin_lock+0x21/0x2f [<c011b5e8>] assign_irq_vector+0x34/0xc8 [<c1aa82fa>] setup_IO_APIC+0x45a/0xcff [<c1aa56e3>] smp_prepare_cpus+0x5ea/0x8aa [<c010033f>] init+0x32/0x2cb [<c0102005>] kernel_thread_helper+0x5/0xb softirq-on-W at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10485e9>] _spin_lock+0x21/0x2f [<c011b5e8>] assign_irq_vector+0x34/0xc8 [<c1aa82fa>] setup_IO_APIC+0x45a/0xcff [<c1aa56e3>] smp_prepare_cpus+0x5ea/0x8aa [<c010033f>] init+0x32/0x2cb [<c0102005>] kernel_thread_helper+0x5/0xb hardirq-on-W at: [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10485e9>] _spin_lock+0x21/0x2f [<c011b5e8>] assign_irq_vector+0x34/0xc8 [<c1aa82fa>] setup_IO_APIC+0x45a/0xcff [<c1aa56e3>] smp_prepare_cpus+0x5ea/0x8aa [<c010033f>] init+0x32/0x2cb [<c0102005>] kernel_thread_helper+0x5/0xb } ... key at: [<c1432574>] vector_lock+0x14/0x3c stack backtrace: [<c0104f36>] show_trace+0xd/0xf [<c010543e>] dump_stack+0x17/0x19 [<c0144e34>] check_usage+0x1f6/0x203 [<c0146395>] __lockdep_acquire+0x8c2/0xaa5 [<c01468c4>] lockdep_acquire+0x68/0x84 [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a [<c04ff8d2>] startup_msi_irq_wo_maskbit+0x10/0x35 [<c015b932>] probe_irq_on+0x44/0x107 [<c0673d58>] serial8250_config_port+0x84b/0x986 [<c06707b1>] uart_add_one_port+0x105/0x289 [<c1ace54b>] serial8250_init+0xc3/0x10a [<c0100457>] init+0x14a/0x2cb [<c0102005>] kernel_thread_helper+0x5/0xb Signed-off-by:Ingo Molnar <mingo@elte.hu> Cc: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Jon Mason authored
include/asm-x86_64/gart-mapping.h is only ever used in arch/x86_64/kernel/setup.c and none of its contents are referenced. Looks to be leftover cruft not removed in the dma_ops patch. Signed-off-by:
-
Andi Kleen authored
Use inline code bitmaps <= BITS_PER_LONG in bitmap_weight. This gives _much_ better code. Signed-off-by:
-
Andi Kleen authored
It was originally added for 2.4 oprofile, but 2.6 oprofile doesn't need that anymore. Shouldn't be any use in tree anymore and it doesn't make much sense to export the ia32 syscalls when the main syscalls are not exported. I think Adrian Bunk asked for removing it several times. Also included hunk from Adrian to remove the .globl ia32_sys_call_table Signed-off-by:
-
Andi Kleen authored
Early development of x86-64 Linux was in CVS, but that hasn't been the case for a long time now. Remove the obsolete $Id$s. Signed-off-by:
-
Don Zickus authored
Misc header cleanup for nmi watchdog. Signed-off-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
-
Ingo Molnar authored
fix unlikely profiling in vsyscalls ... Signed-off-by:
-
Jan Beulich authored
Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by:
-
Andi Kleen authored
Sometimes e.g. with crashme the compat layer warnings can be noisy. Add a way to turn them off by gating all output through compat_printk that checks a global sysctl. The default is not changed. Signed-off-by:
-
Andi Kleen authored
Fix initcall at 0xffffffff806c5b89: pci_iommu_init+0x0/0x53c(): returned with error code -1 Return -ENODEV instead when the IOMMU is not used. Signed-off-by:
-
Jan Beulich authored
Simplify (remove duplication of) code in ioapic_register_intr(). Signed-off-by:
-
Jan Beulich authored
Since assign_irq_vector() can be called at runtime, its access of static variables should be protected by a lock. Signed-off-by:
-
Andi Kleen authored
- Factor out the duplicated access/cache code into a single file * Shared between i386/x86-64. - Share flush code between AGP and IOMMU * Fix a bug: AGP didn't wait for end of flush before - Drop 8 northbridges limit and allocate dynamically - Add lock to serialize AGP and IOMMU GART flushes - Add PCI ID for next AMD northbridge - Random related cleanups The old K8 NUMA discovery code is unchanged. New systems should all use SRAT for this. Cc: "Navin Boppuri" <navin.boppuri@newisys.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by:
-
Jon Mason authored
A trivial change to have gart_unmap_sg call gart_unmap_single directly, instead of bouncing through the dma_unmap_single wrapper in dma-mapping.h. This change required moving the gart_unmap_single above gart_unmap_sg, and under gart_map_single (which seems a more logical place that its current location IMHO). Signed-off-by:
-
Andi Kleen authored
Previously we would just silently provide 64 bit services for this to 32bit processes. I also added all the other cases explicitely to the ptrace compat wrapper to make sure this doesn't happen again. And removed one bogus check in the wrapper. Signed-off-by:
-
Mike Waychison authored
Allow search for a contiguous block of iommu space to cross the next_bit marker if we have already committed ourselves to flushing the gart. There shouldn't be any reason why we'd restrict the search. Signed-off-by:
Mike Waychison <mikew@google.com> Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
Ingo Molnar authored
enable large bzImages on x86_64. (fix is from x86's build.c) Using this patch i have successfully built and booted an allyesconfig 13MB+ bzImage on x86_64 too: $ size64 vmlinux text data bss dec hex filename 23444831 8202642 3439360 35086833 21761f1 vmlinux -rw-rw-r-- 1 mingo mingo 13121740 Apr 19 09:32 arch/x86_64/boot/bzImage Signed-off-by: -
Andi Kleen authored
It's only needed for three system calls, no need to maintain a full list forever. Signed-off-by:
-
Jon Mason authored
Replace hard coded DMA masks with #defines from include/linux/dma-mapping.h Signed-off-by:
-
Gerd Hoffmann authored
Changes are largely identical to the i386 version: * alternative #define are moved to the new alternative.h file. * one new elf section with pointers to the lock prefixes which can be nop'ed out for non-smp. * two new elf sections simliar to the "classic" alternatives to replace SMP code with simpler UP code. * fixup headers to use alternative.h instead of defining their own LOCK / LOCK_PREFIX macros. The patch reuses the i386 version of the alternatives code to avoid code duplication. The code in alternatives.c was shuffled around a bit to reduce the number of #ifdefs needed. It also got some tweaks needed for x86_64 (vsyscall page handling) and new features (noreplacement option which was x86_64 only up to now). Debug printk's are changed from compile-time to runtime. Loosely based on a early version from Bastian Blank <waldi@debian.org> Signed-off-by:
Gerd Hoffmann <kraxel@suse.de> Signed-off-by:
-
Andi Kleen authored
Intel systems report the cache level data from CPUID 4 in sysfs. Add a CPUID 4 emulation for AMD CPUs to report the same information for them. This allows programs to read this information in a uniform way. The AMD way to report this is less flexible so some assumptions are hardcoded (e.g. no L3) Signed-off-by:
-
Andi Kleen authored
Previously the apicid<->coreid split was computed based on the max number of cores. Now use a new CPUID AMD defined for that. On most systems right now it should be 0 and the old method will be used. Signed-off-by:
-
Andi Kleen authored
Inspired from i386 changes Signed-off-by:
-
