Improved readability by fixing some issues related to maximum line length.
Signed-off-by: Felix Winkler <fxmw.tnt@gmail.com>
Signed-off-by: Niklas Witzel <nik.witzel@horsepower-hannover.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

strscpy is preferred over strlcpy and is the standard in the media subsystem.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

modify the return error value is -EDOM

Fixes: 2cac05de("drm/amd/powerplay: add the hw manager for vega12 (v4)")
Cc: Evan Quan <evan.quan@amd.com>
Signed-off-by: Xiaoliang Pang <dawning.pang@gmail.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

commit df561f66 ("treewide: Use fallthrough pseudo-keyword") from
Gustavo A. R. Silva replaced and standardized /* fallthrough */ comments
with 'fallthrough' pseudo-keyword.

However, in one of the switch-case statements, Coverity Static Analyzer
throws a warning that 'fallthrough' is unreachable due to the adjacent
'return false' statement. (Coverity ID CID 1466511)

In order to fix the unreachable code warning, remove unnecessary
fallthrough keyword.
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Address the following issues:
 * unnecessary comparison to true/false
 * use of 0/1 instead of bool values
 * unnecessary conversion to bool

These were fixed using the following Coccinelle scripts:
 * scripts/coccinelle/misc/bool{init,conv,return}.cocci

Build-tested with allmodconfig.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

In a few places in pci/sh_css_params.c, memset is used to zero memory
immediately before it is freed. As none of these structs appear to
contain sensitive information, just remove the calls to memset.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As warned by smatch:

	drivers/media/test-drivers/vidtv/vidtv_psi.c:93 vidtv_psi_update_version_num() warn: impossible condition '(h->version > 32) => (0-31 > 32)'

h_version is declared as:

		u8  version:5;

Meaning that its value ranges from 0 to 31. Incrementing 31 on such
data will overflow to zero, as expected.

So, just drop the uneeded overflow check.

While here, use "foo++" instead of "++foo", as this is a much
more common pattern.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There's no need to use u64 over there. In a matter of fact,
the div is not even needed, as it is multiplying by 1000 and
dividing by 1000.

So, simplify the logic.

While here, constrain the buffer size to a certain range
(between the current value and 10 times it)
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix the following error for builds on 32bit architectures:

ERROR: modpost: "__udivdi3"
[drivers/media/test-drivers/vidtv/dvb-vidtv-bridge.ko] undefined!

Which is due to 64bit divisions that did not go through the helpers
in linux/math64.h

As vidtv_mux_check_mux_rate was not operational in its current form,
drop the entire function while it is not fixed properly.

For now, call vidtv_mux_pad_with_nulls with a constant number of packets
to avoid warnings due to unused functions when building this driver.

The 64bit division used in the s302m is not needed, remove them and use
a fixed number of frames and a constant PTS increment instead.

Fixes: f90cf607 ("media: vidtv: add a bridge driver")
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Keep playing a single tone is not too nice, and prevents
checking some weird things.

So, instead, implement a simple tone generator, changing
the code to play a public domain song (5th Symphony of
Beethoven), using sinusoidal waves.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Instead, use the code from linux/fixp-arith.h.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

A typical digital TV stream has errors that are corrected
by Viterbi. While the error rate after Viterbi is usually
zero, with good signals, there are some chances of getting
random errors before that, which are auto-corrected by
the error code algorithm.

Add a poor guy's implementation that would show some
noise at the pre-BER part of the demod.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The virtual driver has now a minimal set of frequencies for a
single transponder to be found by each DVB standard.

Document it, and update related information about the
simulated LNBf.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Satellite setups are different than terrestrial and cable ones,
as there is a device coupled at the antenna, called LNBf, which
converts the frequency from a GHz range at C-Band or Ku-Band
into an intermediate frequency at S-Band (ranging up to ~2GHz).

There are several different models of LNBf, with different
IF conversions, but the most common nowadays is called
Universal LNBf. Those got their frequency ranges extended in the
past, when Astra 19.2E sattellite was launched.

The universal LNBf has two local oscilators:

	- 9.75 GHz
	- 10.6 GHz

The first one is used when the frequency is between 10.7 GHz
up to 11.7 GHz. The second one is for frequencies between
11.7 GHz to 12.75 GHz.

With that, the IF signal will be at 950 MHz to 2,150 MHz range.

Add support for doing the above math, and make clear that
the frequencies expected by the driver should be at Ku-Band
range.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Those are needed for real applications to work with Satellite
systems.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As reported by gcc:

	drivers/media/test-drivers/vidtv/vidtv_demod.c: In function 'vidtv_demod_set_frontend':
	drivers/media/test-drivers/vidtv/vidtv_demod.c:265:42: warning: variable 'cnr2qual' set but not used [-Wunused-but-set-variable]
	  265 |  const struct vidtv_demod_cnr_to_qual_s *cnr2qual = NULL;
	      |                                          ^~~~~~~~

It turns that the var is not needed at all. So, just drop it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

On real devices, signal strength is always a negative
number when represented in dBm. A more interesting
range is to use dBmV (which is what Kaffeine does,
for example). The conversion from the two units are
simple:

	dBmV = dBm - 108

Usually, signal strength ranges up to 100dBmV. Adjust the
maximum value to be around 74 dBmV, when there's no
frequency shift, which represents a good signal.

With that, Kaffeine displays it a lot better.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add support for incrementing DVBv5 stats for block counters
and post/pre BER byte counts.

For now, the errors won't be incremented yet.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The dvb_frontend will already call status periodically, when
a channel is tuned. So, no need to have a work queue for
such purpose.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The current stats code is broken on so many ways. It ends
reporting 0 for signal strengh, and the work queue doesn't
run. If it would run, the code would crash.

Fix such issues and add the minimum stuff for DVBv5 stats.

Right now, only strength and cnr and UCB are implemented.
pre/post BER stats will always return zero.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Right now, the config data passed from the bridge driver is
just ignored.

Also, let's initialize the delayed work at probing time.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The code there is already doing the right thing, as it uses
value & 0xff, value & 0xff00, which already ensures the
expected endiannes.

So, it doesn't make any sense to touch the order depending on
the CPU endiannes.

Yet, as pointed by Daniel at the mailing list:
	https://lore.kernel.org/linux-media/e614351c-215c-c048-52af-7c200b164f41@xs4all.nl/T/#m8d221684a151833966359c2ed8bdce0f0ee4e5fd

The reverse code is needed by the decoder. So, keep it
no matter the endiannes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Use 474 MHz frequency for DVB-T/DVB-C, as this is the at the
channel range that it is valid on most places for DVB-T.

In the case of DVB-S, let's add Astra 19.2E initial
frequency at the scan files as the default, e. g. 12.5515 GHz.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Right now, there are some issues at the tuning logic:

1) the config struct is not copied at the tuner driver.
   so, it won't use any frequency table at all;
2) the code that checks for frequency shifts is called
   at set_params. So, lock_status will never be zeroed;
3) the signal strength will also report a strong
   signal, even if not tuned;
4) the logic is not excluding non-set frequencies.

Fix those issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The two places where ENDIAN_BITFIELD is used is for a single
8-bits integer. No need to correct endiannes on such cases.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Genmask is always highest order to low order. It doesn't make
any sense to make it depends on endiannes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are several warnings produced when the driver is built
for 32-bit archs. Solve them.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

It is better to use the higher level dev_foo() than pr_foo()
for printks.

Change them at vidtv at the more trivial places.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As this virtual driver is probed manually, add modaliases
for this driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

In order to boot some of the new Venus firmware versions TZ call to set
virtual address ranges is needed. Add virtual address ranges for CP and
CP_NONPIX in resource structure and use them when loading and booting
the firmware on remote processor.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This adds a new SCM memprotect command to set virtual address ranges.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Elliot Berman <eberman@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

We have a new helper to set profile and level use it
instead.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Currently the returned profile and level is not aligned with
v4l2 ctrl id. Correct that by use the helpers which translate
the v4l2 <-> hfi mapping internally.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Get and set VP9 codec profile and levels.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Introduce a helper to set and get profile and levels which
includes the translation between v4l2 ctrl ids and HFI ids.
The input arguments are always in v4l2 ids space.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add HFI defines for VP9 codec profile and levels.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add menu control for VP9 codec levels. A total of 14 levels are
defined for Profile 0 (8bit) and Profile 2 (10bit). Each level
is a set of constrained bitstreams coded with targeted resolutions,
frame rates, and bitrates.

The definitions have been taken from webm project [1].

[1] https://www.webmproject.org/vp9/levels/Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Since commit 9495b7e9 ("driver core: platform: Initialize dma_parms
for platform devices"), struct platform_device already provides a
dma_parms structure, so we can save allocating another one.

Also the DMA segment size is simply a size, not a bitmask.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

menuconfig DVB_TEST_DRIVERS should be added after the V4L_TEST_DRIVERS,
otherwise there are no drivers listed in these two menus.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 24fb190e ("media: vidtv: implement a tuner driver")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The current remove logic is broken and causes an OOPS.

Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>