- 09 Mar, 2012 10 commits
-
-
Gavin Shan authored
On RTAS compliant pSeries platform, one dedicated RTAS call has been introduced to retrieve EEH temporary or permanent error log. The patch implements the function of retriving EEH error log through RTAS call. Besides, it has been abstracted by struct eeh_ops::get_log so that EEH core components could support multiple platforms in future. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Gavin Shan authored
On RTAS compliant pSeries platform, there is a dedicated RTAS call (ibm,set-slot-reset) to reset the specified PE. Furthermore, two types of resets are supported: hot and fundamental. the type of reset is to be used actually depends on the included PCI device's requirements. The patch implements resetting PE on pSeries platform through RTAS call. Besides, it has been abstracted through struct eeh_ops::reset so that EEH core components could support multiple platforms in future. Signed-off-by:
-
Gavin Shan authored
On pSeries platform, the PE state might be temporarily unavailable. In that case, the firmware will return the corresponding wait time. That means the kernel has to wait for appropriate time in order to get the PE state. The patch does the implementation for that. Besides, the function has been abstracted through struct eeh_ops::wait_state so that EEH core components could support multiple platforms in future. Signed-off-by:
-
Gavin Shan authored
On pSeries platform, there're 2 dedicated RTAS calls introduced to retrieve the corresponding PE's state: ibm,read-slot-reset-state and ibm,read-slot-reset-state2. The patch implements the retrieval of PE's state according to the given PE address. Besides, the implementation has been abstracted by struct eeh_ops::get_state so that EEH core components could support multiple platforms in future. Signed-off-by:
-
Gavin Shan authored
There're 2 types of addresses used for EEH operations. The first one would be BDF (Bus/Device/Function) address which is retrieved from the reg property of the corresponding FDT node. Another one is PE address that should be enquired from firmware through RTAS call on pSeries platform. When issuing EEH operation, the PE address has precedence over BDF address. The patch implements retrieving PE address according to the given BDF address on pSeries platform. Also, the struct eeh_early_enable_info has been removed since the information can be figured out from dn->pdn->phb->buid directly and that simplifies the code. Signed-off-by:
-
Gavin Shan authored
There're 4 EEH operations that are covered by the dedicated RTAS call <ibm,set-eeh-option>: enable or disable EEH, enable MMIO and enable DMA. At early stage of system boot, the EEH would be tried to enable on PCI device related device node. MMIO and DMA for particular PE should be enabled when doing recovery on EEH errors so that the PE could function properly again. The patch implements it and abstract that through struct eeh_ops::set_eeh. It would be help for EEH to support multiple platforms in future. Signed-off-by:
-
Gavin Shan authored
The platform specific EEH operations have been abstracted by struct eeh_ops. The individual platroms, including pSeries, needs doing necessary initialization before the platform dependent EEH operations work properly. The patch is addressing that and do necessary platform initialization for pSeries platform. More specificly, it will figure out the tokens of EEH related RTAS calls. Signed-off-by:
-
Gavin Shan authored
EEH has been implemented on RTAS-compliant pSeries platform. That's to say, the EEH operations will be implemented through RTAS calls eventually. The situation limited feasible extension on EEH. In order to support EEH on multiple platforms like pseries and powernv simutaneously. We have to split the platform dependent EEH options up out of current implementation. The patch addresses supporting EEH on multiple platforms. The pseries platform dependent EEH operations will be abstracted by struct eeh_ops. EEH core components will be built based on the registered EEH operations. With the mechanism, what the individual platform needs to do is implement platform dependent EEH operations. For now, the pseries platform is covered under the mechanism. That means we have to think about other platforms to support EEH, like powernv. Besides, we only have framework for the mechanism and we have to implement it for pseries platform later. Signed-off-by:
-
Gavin Shan authored
The EEH has been implemented on pSeries platform. The original code looks a little bit nasty. The patch does cleanup on the current EEH implementation so that it looks more clean. * Try adding prefix "eeh" for functions. * Some function names have been adjusted so that they looks shorter and meaningful. Signed-off-by: -
Gavin Shan authored
The EEH has been implemented on pSeries platform. The original code looks a little bit nasty. The patch does cleanup on the current EEH implementation so that it looks more clean. * Duplicated comments have been removed from the corresponding header files. * Comments have been reorganized so that it looks more clean. * The leading comments of functions are adjusted for a little bit so that the result of "make pdfdocs" would be more unified. * Function definitions and calls have unified format as "xxx()". That means the format "xxx ()" has been replaced by "xxx()". * There're multiple functions implemented for resetting PE. The position of those functions have been move around so that they are adjacent to each other to reflect their relationship. Signed-off-by:
-
- 08 Mar, 2012 7 commits
-
-
Stephen Rothwell authored
This cleans up vio.c after the removal of the legacy iSeries platform. It also removes some no longer referenced include files. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Stephen Rothwell authored
The PowerPC legacy iSeries plateform is being removed along with the "one looney iseries driver", so this code can now be removed as well. cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Stephen Rothwell authored
The PowerPC legacy iSeries platform is being removed so this is no longer selectable. Cc: Alan Cox <alan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Signed-off-by:
-
Stephen Rothwell authored
The PowerPC legacy iSeries platform is being removed, so this code is no longer needed. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Stephen Rothwell authored
The PowerPC legacy iSeries platform is being removed and this code is no longer selectable. There is more clean up that can be done, but this just gets the old code out of the way. Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Stephen Rothwell authored
This driver is specific to the PowerPC legcay iSeries platform which is being removed. Cc: David Miller <davem@davemloft.net> Cc: <netdev@vger.kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
-
- 07 Mar, 2012 8 commits
-
-
Akinobu Mita authored
- Use memchr_inv to check if the data contains all 0xFF bytes. It is faster than looping for each byte. - Use memcmp to compare memory areas Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
-
Grant Likely authored
All IRQs on powerpc are managed via irq_domain anyway, there isn't really any advantage to turning SPARSE_IRQ off, and it's the direction we want to take the kernel design anyway. This patch makes powerpc always use SPARSE_IRQ. On pseries_defconfig, SPARSE_IRQ adds only about 0x300 bytes to the .text sections, and removes about 0x20000 from the data section for the static irq_desc table. Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Ben Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Nishanth Aravamudan authored
On a 16TB system (using AMS/CMO), I get: WARNING: ignoring large property [/ibm,dynamic-reconfiguration-memory] ibm,dynamic-memory length 0x000000000017ffec and significantly less memory is thus shown to the partition. As far as I can tell, the constant used is arbitrary. Ben Herrenschmidt provided additional background that > The limit was originally set because of Apple machines carrying ROM > images in the device-tree, at a time where we were much more memory > constrained than we are now. and that it is likely not very useful any longer. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Cc: Oleg Nesterov <oleg@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Joe Perches authored
Emit the function name not the address when possible. builtin_return_address() gives an address. When building a kernel with CONFIG_KALLSYMS, emit the actual function name not the address. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Jimi Xenidis authored
There is a race where a thread causes a coprocessor type to be valid in its own ACOP _and_ in the current context, but it does not propagate to the ACOP register of other threads in time for them to use it. The original code tries to solve this by sending an IPI to all threads on the system, which is heavy handed, but unfortunately still provides a window where the icswx is issued by other threads and the ACOP is not up to date. This patch detects that the ACOP DSI fault was a "false positive" and syncs the ACOP and causes the icswx to be replayed. Signed-off-by:
Jimi Xenidis <jimix@pobox.com> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Anton Blanchard authored
Implement atomic_inc_not_zero and atomic64_inc_not_zero. At the moment we use atomic*_add_unless which requires us to put 0 and 1 constants into registers. We can also avoid a subtract by saving the original value in a second temporary. This removes 3 instructions from fget: - c0000000001b63c0: 39 00 00 00 li r8,0 - c0000000001b63c4: 39 40 00 01 li r10,1 ... - c0000000001b63e8: 7c 0a 00 50 subf r0,r10,r0 Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Anton Blanchard authored
We want to implement a ppc64 specific version of atomic_inc_not_zero so wrap it in an ifdef to allow it to be overridden. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
- 27 Feb, 2012 7 commits
-
-
Ira Snyder authored
When the system is under heavy load, we occasionally saw a problem where the system would get a legitimate interrupt when they should be disabled. This was caused by the data_dma_cb() DMA callback unconditionally re-enabling FPGA interrupts even when data dumping is disabled. When data dumping was re-enabled, the irq handler would fire while a DMA was in progress. The "BUG_ON(priv->inflight != NULL);" during the second invocation of the DMA callback caused the system to crash. To fix the issue, the priv->enabled boolean is moved under the protection of the priv->lock spinlock. The DMA callback checks the boolean to know whether to re-enable FPGA interrupts before it returns. Now that it is fixed, the driver keeps FPGA interrupts disabled when it expects that they are disabled, fixing the bug. Signed-off-by:
Ira W. Snyder <iws@ovro.caltech.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Ira Snyder authored
Lockdep occasionally complains with the message: INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected This is caused by calling videobuf_dma_unmap() under spin_lock_irq(). To fix the warning, we drop the lock before unmapping and freeing the buffer. Signed-off-by:
-
Masanari Iida authored
Fix typo "unsuported" to "unsupported" in drivers/machintosh/mediabay.c Signed-off-by: Masanari Iida<standby24x7@gmail.com> Signed-off-by: -
Danny Kukawka authored
arch/powerpc/platforms/powernv/setup.c: included 'asm/xics.h' twice, remove the duplicate. Signed-off-by:
Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by:
-
Danny Kukawka authored
arch/powerpc/kvm/book3s_hv.c: included 'linux/sched.h' twice, remove the duplicate. Signed-off-by:
-
Stephen Rothwell authored
After this, we can remove the legacy iSeries code more easily. Signed-off-by:
-
Benjamin Herrenschmidt authored
When using a multi-ISU MPIC, we can interrupts up to isu_size * MPIC_MAX_ISU, not just isu_size, so allocate the right size reverse map. Without this, the code will constantly fallback to a linear search. Signed-off-by:
-
- 26 Feb, 2012 3 commits
-
-
Benjamin Herrenschmidt authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
1) ICMP sockets leave err uninitialized but we try to return it for the unsupported MSG_OOB case, reported by Dave Jones. 2) Add new Zaurus device ID entries, from Dave Jones. 3) Pointer calculation in hso driver memset is wrong, from Dan Carpenter. 4) ks8851_probe() checks unsigned value as negative, fix also from Dan Carpenter. 5) Fix crashes in atl1c driver due to TX queue handling, from Eric Dumazet. I anticipate some TX side locking fixes coming in the near future for this driver as well. 6) The inline directive fix in Bluetooth which was breaking the build only with very new versions of GCC, from Johan Hedberg. 7) Fix crashes in the ATP CLIP code due to ARP cleanups this merge window, reported by Meelis Roos and fixed by Eric Dumazet. 8) JME driver doesn't flush RX FIFO correctly, from Guo-Fu Tseng. 9) Some ip6_route_output() callers test the return value for NULL, but this never happens as the convention is to return a dst entry with dst->error set. Fixes from RonQing Li. 10) Logitech Harmony 900 should be handled by zaurus driver not cdc_ether, update white lists and black lists accordingly. From Scott Talbert. 11) Receiving from certain kinds of devices there won't be a MAC header, so there is no MAC header to fixup in the IPSEC code, and if we try to do it we'll crash. Fix from Eric Dumazet. 12) Port type array indexing off-by-one in mlx4 driver, fix from Yevgeny Petrilin. 13) Fix regression in link-down handling in davinci_emac which causes all RX descriptors to be freed up and therefore RX to wedge completely, from Christian Riesch. 14) It took two attempts, but ctnetlink soft lockups seem to be cured now, from Pablo Neira Ayuso. 15) Endianness bug fix in ENIC driver, from Santosh Nayak. 16) The long ago conversion of the PPP fragmentation code over to abstracted SKB list handling wasn't perfect, once we get an out of sequence SKB we don't flush the rest of them like we should. From Ben McKeegan. 17) Fix regression of ->ip_summed initialization in sfc driver. From Ben Hutchings. 18) Bluetooth timeout mistakenly using msecs instead of jiffies, from Andrzej Kaczmarek. 19) Using _sync variant of work cancellation results in deadlocks, use the non _sync variants instead. From Andre Guedes. 20) Bluetooth rfcomm code had reference counting problems leading to crashes, fix from Octavian Purdila. 21) The conversion of netem over to classful qdisc handling added two bugs to netem_dequeue(), fixes from Eric Dumazet. 22) Missing pci_iounmap() in ATM Solos driver. Fix from Julia Lawall. 23) b44_pci_exit() should not have __exit tag since it's invoked from non-__exit code. From Nikola Pajkovsky. 24) The conversion of the neighbour hash tables over to RCU added a race, fixed here by adding the necessary reread of tbl->nht, fix from Michel Machado. 25) When we added VF (virtual function) attributes for network device dumps, this potentially bloats up the size of the dump of one network device such that the dump size is too large for the buffer allocated by properly written netlink applications. In particular, if you add 255 VFs to a network device, parts of GLIBC stop working. To fix this, we add an attribute that is used to turn on these extended portions of the network device dump. Sophisticaed applications like 'ip' that want to see this stuff will be changed to set the attribute, whereas things like GLIBC that don't care about VFs simply will not, and therefore won't be busted by the mere presence of VFs on a network device. Thanks to the tireless work of Greg Rose on this fix. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits) sfc: Fix assignment of ip_summed for pre-allocated skbs ppp: fix 'ppp_mp_reconstruct bad seq' errors enic: Fix endianness bug. gre: fix spelling in comments netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2) Revert "netfilter: ctnetlink: fix soft lockup when netlink adds new entries" davinci_emac: Do not free all rx dma descriptors during init mlx4_core: Fixing array indexes when setting port types phy: IC+101G and PHY_HAS_INTERRUPT flag netdev/phy/icplus: Correct broken phy_init code ipsec: be careful of non existing mac headers Move Logitech Harmony 900 from cdc_ether to zaurus hso: memsetting wrong data in hso_get_count() netfilter: ip6_route_output() never returns NULL. ethernet/broadcom: ip6_route_output() never returns NULL. ipv6: ip6_route_output() never returns NULL. jme: Fix FIFO flush issue atm: clip: remove clip_tbl ipv4: ping: Fix recvmsg MSG_OOB error handling. rtnetlink: Fix problem with buffer allocation ...
-
Linus Torvalds authored
The autofs compat handling fix caused a compile failure when CONFIG_COMPAT isn't defined. Instead of adding random #ifdef'fery in autofs, let's just make the compat helpers earlier to use: without CONFIG_COMPAT, is_compat_task() just hardcodes to zero. We could probably do something similar for a number of other cases where we have #ifdef's in code, but this is the low-hanging fruit. Reported-and-tested-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 25 Feb, 2012 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Couple of minor driver fixes. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max34440) Fix resetting temperature history hwmon: (f75375s) Fix register write order when setting fans to full speed hwmon: (ads1015) Fix file leak in probe function hwmon: (max6639) Fix PPR register initialization to set both channels hwmon: (max6639) Fix FAN_FROM_REG calculation
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
three kbuild fixes for 3.3: - make deb-pkg symlink race fix. - make coccicheck fix. - Dropping the check for modutils. This is not a regression, but allows the module-init-tools replacement kmod work with the 3.3 kernel. * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: coccicheck: change handling of C={1,2} when M= is set builddeb: Don't create files in /tmp with predictable names kbuild: do not check for ancient modutils tools
-
Ian Kent authored
When the autofs protocol version 5 packet type was added in commit 5c0a32fc ("autofs4: add new packet type for v5 communications"), it obvously tried quite hard to be word-size agnostic, and uses explicitly sized fields that are all correctly aligned. However, with the final "char name[NAME_MAX+1]" array at the end, the actual size of the structure ends up being not very well defined: because the struct isn't marked 'packed', doing a "sizeof()" on it will align the size of the struct up to the biggest alignment of the members it has. And despite all the members being the same, the alignment of them is different: a "__u64" has 4-byte alignment on x86-32, but native 8-byte alignment on x86-64. And while 'NAME_MAX+1' ends up being a nice round number (256), the name[] array starts out a 4-byte aligned. End result: the "packed" size of the structure is 300 bytes: 4-byte, but not 8-byte aligned. As a result, despite all the fields being in the same place on all architectures, sizeof() will round up that size to 304 bytes on architectures that have 8-byte alignment for u64. Note that this is *not* a problem for 32-bit compat mode on POWER, since there __u64 is 8-byte aligned even in 32-bit mode. But on x86, 32-bit and 64-bit alignment is different for 64-bit entities, and as a result the structure that has exactly the same layout has different sizes. So on x86-64, but no other architecture, we will just subtract 4 from the size of the structure when running in a compat task. That way we will write the properly sized packet that user mode expects. Not pretty. Sadly, this very subtle, and unnecessary, size difference has been encoded in user space that wants to read packets of *exactly* the right size, and will refuse to touch anything else. Reported-and-tested-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
One InfiniBand/RDMA regression fix for 3.3: - mlx4 SR-IOV changes added static exported functions, which doesn't build on powerpc at least. Fix from Doug Ledford for this. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Exported functions can't be static
-
