- 13 Sep, 2008 18 commits
-
-
Andrew Morton authored
Herton Krzesinski reports that the error-checking changes in 04ebd4ae ("block/ioctl.c and fs/partition/check.c: check value returned by add_partition") cause his buggy USB camera to no longer mount. "The camera is an Olympus X-840. The original issue comes from the camera itself: its format program creates a partition with an off by one error". Buggy devices happen. It is better for the kernel to warn and to proceed with the mount. Reported-by:
Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: Abdel Benamrouche <draconux@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ben Dooks authored
Fix the section mismatch warning generated by the incorrect naming of s3c24xx_spidrv which should be s3c24xx_spi_driver: WARNING: drivers/spi/spi_s3c24xx.o(.data+0x4): Section mismatch in reference from the variable s3c24xx_spidrv to the (unknown reference) .exit.text:(unknown) Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Haavard Skinnemoen authored
When suspending the system with atmel_lcdfb enabled, I sometimes see this: atmel_lcdfb atmel_lcdfb.0: FIFO underflow 0x10 Which can be explained by the fact that we're not stopping the LCD controller and its DMA engine when suspending, we're just gating the clocks to them. There's another potential issue which may be harder to trigger but much more nasty: If we gate the clocks at _just_ the right moment, e.g. when the DMA engine is doing a bus transaction, we may cause the DMA engine to violate the system bus protocol and cause a lockup. Avoid these issues by shutting down the LCD controller before entering suspend (and restarting it when resuming). This prevents the underrun from happening in the first place, and prevents whatever nastiness is happening when the bus clock stops in the middle of a DMA transfer. Signed-off-by:
Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Robin Holt authored
If you are on ia64 and you modprobe xpc then modprobe -r xpc, you immediately get a panic. xpc depends on xp which depends on gru for a symbol. That symbol is only used when we are running on UV hardware. Currently, the GRU driver detects we are not on UV hardware and does no initializing. It does not do the same check when unloading. As a result, the gru driver attempts to tear down stuff that was not setup. This is a simple two-line workaround to get us through this release. Once 2.6.28 is opened, we need to rework the symbols that xp is depending on from gru so the gru driver can properly fail to load when hardware is not available. Signed-off-by:
Robin Holt <holt@sgi.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
Ming Lei authored
It should be linux-uvc-devel@lists.berlios.de. Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
-
David Brownell authored
Provide summary ABI docs about the /sys/class/gpio files. Signed-off-by:
-
Mel Gorman authored
The iterator for_each_zone_zonelist() uses a struct zoneref *z cursor when scanning zonelists to keep track of where in the zonelist it is. The zoneref that is returned corresponds to the the next zone that is to be scanned, not the current one. It was intended to be treated as an opaque list. When the page allocator is scanning a zonelist, it marks elements in the zonelist corresponding to zones that are temporarily full. As the zonelist is being updated, it uses the cursor here; if (NUMA_BUILD) zlc_mark_zone_full(zonelist, z); This is intended to prevent rescanning in the near future but the zoneref cursor does not correspond to the zone that has been found to be full. This is an easy misunderstanding to make so this patch corrects the problem by changing zoneref cursor to be the current zone being scanned instead of the next one. Signed-off-by:Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.26.x] Signed-off-by:
-
Ned Forrester authored
Fixes two DMA bugs in the pxa2xx_spi driver. The first bug is in all versions of this driver; the second was introduced in the 2.6.20 kernel, and prevents using the driver with chips like m25p16 flash (which can issue large DMA reads). 1. Zero length transfers are permitted for use to insert timing, but pxa2xx_spi.c will fail if this is requested in DMA mode. Fixed by using programmed I/O (PIO) mode for such transfers. 2. Transfers larger than 8191 are not permitted in DMA mode. A test for length rejects all large transfers regardless of DMA or PIO mode. Worked around by rejecting only large transfers with DMA mapped buffers, and forcing all other transfers larger than 8191 to use PIO mode. A rate limited warning is issued for DMA transfers forced to PIO mode. This patch should apply to all kernels back to and including 2.6.20; it was test patched against 2.6.20. An additional patch would be required for older kernels, but those versions are very buggy anyway. Signed-off-by:Ned Forrester <nforrester@whoi.edu> Cc: Vernon Sauder <vernoninhand@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
-
Ned Forrester authored
Fixes several chipselect bugs in the pxa2xx_spi driver. These bugs are in all versions of this driver and prevent using it with chips like m25p16 flash. 1. The spi_transfer.cs_change flag is handled too early: before spi_transfer.delay_usecs applies, thus making the delay ineffective at holding chip select. 2. spi_transfer.delay_usecs is ignored on the last transfer of a message (likewise not holding chipselect long enough). 3. If spi_transfer.cs_change is set on the last transfer, the chip select is always disabled, instead of the intended meaning: optionally holding chip select enabled for the next message. Those first three bugs were fixed with a relocation of delays and chip select de-assertions. 4. If a message has the cs_change flag set on the last transfer, and had the chip select stayed enabled as requested (see 3, above), it would not have been disabled if the next message is for a different chip. Fixed by dropping chip select regardless of cs_change at end of a message, if there is no next message or if the next message is for a different chip. This patch should apply to all kernels back to and including 2.6.20; it was test patched against 2.6.20. An additional patch would be required for older kernels, but those versions are very buggy anyway. Signed-off-by: -
Peter Korsgaard authored
Error out on transfer length != multiple of bytes per word with -EINVAL. Fixes a buffer overrun crash if length < bytes per word. Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Acked-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by:
-
Peter Korsgaard authored
Commit a61f5345 (spi_mpc83xx clockrate fixes) broke clockrate calculation for low speeds. SPMODE_DIV16 should be set if the divider is higher than 64, not only if the divider gets clipped to 1024. Furthermore, the clipping check was off by a factor 16 as well. Signed-off-by:
-
Hugh Dickins authored
A "Quicklists: 0 kB" line has just started appearing in /proc/meminfo, but most architectures (including x86) don't have them configured, so #ifdef it, like the highmem lines. And those architectures which do have quicklists configured are using them for page tables: so let's place it next to PageTables. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Acked-by:
Christoph Lameter <cl@linux-foundation.org> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Eric Sesterhenn authored
This fixes: ============================================= [ INFO: possible recursive locking detected ] 2.6.27-rc5-00283-g70bb0896 #68 --------------------------------------------- touch/6855 is trying to acquire lock: (&info->bfs_lock){--..}, at: [<c02262f5>] bfs_delete_inode+0x9e/0x18c but task is already holding lock: (&info->bfs_lock){--..}, at: [<c0226c00>] bfs_create+0x45/0x187 other info that might help us debug this: 2 locks held by touch/6855: #0: (&type->i_mutex_dir_key#5){--..}, at: [<c018ad13>] do_filp_open+0x10b/0x62f #1: (&info->bfs_lock){--..}, at: [<c0226c00>] bfs_create+0x45/0x187 stack backtrace: Pid: 6855, comm: touch Not tainted 2.6.27-rc5-00283-g70bb0896 #68 [<c013e769>] validate_chain+0x458/0x9f4 [<c013bece>] ? trace_hardirqs_off+0xb/0xd [<c013f36b>] __lock_acquire+0x666/0x6e0 [<c013f440>] lock_acquire+0x5b/0x77 [<c02262f5>] ? bfs_delete_inode+0x9e/0x18c [<c06aab74>] mutex_lock_nested+0xbc/0x234 [<c02262f5>] ? bfs_delete_inode+0x9e/0x18c [<c02262f5>] ? bfs_delete_inode+0x9e/0x18c [<c02262f5>] bfs_delete_inode+0x9e/0x18c [<c0226257>] ? bfs_delete_inode+0x0/0x18c [<c01925e1>] generic_delete_inode+0x94/0xfe [<c019265d>] generic_drop_inode+0x12/0x12f [<c0191b7e>] iput+0x4b/0x4e [<c0226d1e>] bfs_create+0x163/0x187 [<c0188b42>] vfs_create+0xa6/0x114 [<c018adb5>] do_filp_open+0x1ad/0x62f [<c0107cdc>] ? native_sched_clock+0x82/0x96 [<c06ac309>] ? _spin_unlock+0x27/0x3c [<c019379e>] ? alloc_fd+0xbf/0xc9 [<c06ae2f4>] ? sub_preempt_count+0x9d/0xab [<c019379e>] ? alloc_fd+0xbf/0xc9 [<c0180391>] do_sys_open+0x42/0xb8 [<c041d564>] ? trace_hardirqs_on_thunk+0xc/0x10 [<c0180449>] sys_open+0x1e/0x26 [<c01038bd>] sysenter_do_call+0x12/0x31 ======================= The problem is that we don't unlock the bfs->lock mutex before calling iput (we do in the other cases). Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Signed-off-by:
-
Hidehiro Kawai authored
There is no description of bit 4 of coredump_filter in the documentation. This patch adds it. Signed-off-by:
Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Roland McGrath <roland@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Acked-by:
-
Li Zefan authored
If all the cpus in a cpuset are offlined, the tasks in it will be moved to the nearest ancestor with non-empty cpus. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
Paul Jackson <pj@sgi.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Li Zefan authored
After the patch: commit 0b2f630a Author: Miao Xie <miaox@cn.fujitsu.com> Date: Fri Jul 25 01:47:21 2008 -0700 cpusets: restructure the function update_cpumask() and update_nodemask() It might happen that 'echo 0 > /cpuset/sub/cpus' returned failure but 'cpus' has been changed, because cpus was changed before calling heap_init() which may return -ENOMEM. This patch restores the orginal behavior. Signed-off-by:
Paul Menage <menage@google.com> Cc: Paul Jackson <pj@sgi.com> Cc: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Hiroshi DOYU authored
akpm: these have no callers at this time, but they shall soon, so let's get them right. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Alexey Dobriyan authored
Print parent directory name as well. The aim is to catch non-creation of parent directory when proc_mkdir will return NULL and all subsequent registrations go directly in /proc instead of intended directory. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
- 11 Sep, 2008 12 commits
-
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: sg: disable interrupts inside sg_copy_buffer
-
David Howells authored
Change the MN10300 fault handler to make it check in_atomic() rather than in_interrupt() as commit 6edaf68a did for other architectures: Author: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Wed Dec 6 20:32:18 2006 -0800 [PATCH] mm: arch do_page_fault() vs in_atomic() In light of the recent pagefault and filemap_copy_from_user work I've gone through all the arch pagefault handlers to make sure the inc_preempt_count() 'feature' works as expected. Several sections of code (including the new filemap_copy_from_user) rely on the fact that faults do not take locks under increased preempt count. Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
FUJITA Tomonori authored
The callers of sg_copy_buffer must disable interrupts before calling it (since it uses kmap_atomic). Some callers use it on interrupt-disabled code but some need to take the trouble to disable interrupts just for this. No wonder they forget about it and we hit a bug like: http://bugzilla.kernel.org/show_bug.cgi?id=11529 James said that it might be better to disable interrupts inside the function rather than risk the callers getting it wrong. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
Jens Axboe <jens.axboe@oracle.com>
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: disable sysfs parts of the disk command filter
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvmLinus Torvalds authored
* 'kvm-updates/2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: VMX: Always return old for clear_flush_young() when using EPT KVM: SVM: fix guest global tlb flushes with NPT KVM: SVM: fix random segfaults with NPT enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] fix check of PQ and PDT bits for WLUNs [SCSI] make scsi_check_sense HARDWARE_ERROR return ADD_TO_MLQUEUE on retry [SCSI] scsi_dh: make check_sense return ADD_TO_MLQUEUE [SCSI] zfcp: Remove duplicated unlikely() macros. [SCSI] zfcp: channel cannot be detached due to refcount imbalance [SCSI] zfcp: Fix reference counter for remote ports [SCSI] zfcp: Simplify ccw notify handler [SCSI] zfcp: Correctly query end flag in gpn_ft response [SCSI] zfcp: Fix request queue locking [SCSI] sd: select CRC_T10DIF only when necessary
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] prevent ia64 from invoking irq handlers on offline CPUs [IA64] arch/ia64/sn/pci/tioca_provider.c: introduce missing kfree [IA64] fix up bte.h [IA64] fix compile failure with non modular builds
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: add llseek method udf: Fix error paths in udf_new_inode() udf: Fix lock inversion between iprune_mutex and alloc_mutex (v2)
-
Jens Axboe authored
We still have life time issues with the sysfs command filter kobject, so disable it for 2.6.27 release. We can revisit this and make it work properly for 2.6.28, for 2.6.27 release it's too risky. Signed-off-by: -
Sheng Yang authored
As well as discard fake accessed bit and dirty bit of EPT. Signed-off-by:
Sheng Yang <sheng.yang@intel.com> Signed-off-by:
Avi Kivity <avi@qumranet.com>
-
Joerg Roedel authored
Accesses to CR4 are intercepted even with Nested Paging enabled. But the code does not check if the guest wants to do a global TLB flush. So this flush gets lost. This patch adds the check and the flush to svm_set_cr4. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
-
Joerg Roedel authored
This patch introduces a guest TLB flush on every NPF exit in KVM. This fixes random segfaults and #UD exceptions in the guest seen under some workloads (e.g. long running compile workloads or tbench). A kernbench run with and without that fix showed that it has a slowdown lower than 0.5% Cc: stable@kernel.org Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
-
- 10 Sep, 2008 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: add deprecated ide-scsi to feature-removal-schedule.txt ide: Fix pointer arithmetic in hpt3xx driver code (3rd try)
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
commit 0d3244d6 ("V4L/DVB (8342): sh_mobile_ceu_camera: Add SuperH Mobile CEU driver V3") introduced VIDEO_SH_MOBILE_CEU, which selects VIDEOBUF_DMA_CONTIG. This circumvents the dependency on HAS_DMA of VIDEOBUF_DMA_CONTIG. Add a dependency on HAS_DMA to VIDEO_SH_MOBILE_CEU to fix this. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Acked-by:
Magnus Damm <damm@igel.co.jp> Signed-off-by:
-
Daniel J Blueman authored
This fixes a SWIOTLB oops With SWIOTLB being enabled and straight-forward page allocation failure [1], the swiotlb_alloc_coherent fall-back path hits an issue [2], resulting in my webcam failing to work. At the time of oops, RDI is clearly a pointer to a structure which has arrived as NULL, leading to the typo in swiotlb_map_single's callsite arguments. Correctly passing the device structure [3] addresses the issue and gets my webcam working again (the allocation failure still occuring). --- [1] skype: page allocation failure. order:3, mode:0x1 Pid: 5895, comm: skype Not tainted 2.6.27-rc6-235c-debug #1 Call Trace: [<ffffffff802b7cf0>] __alloc_pages_internal+0x4a0/0x5d0 [<ffffffff802d5ddd>] alloc_pages_current+0xad/0x110 [<ffffffff802b4ccd>] __get_free_pages+0x1d/0x60 [<ffffffff8046cd39>] swiotlb_alloc_coherent+0x49/0x180 [<ffffffff80212731>] dma_alloc_coherent+0x281/0x310 [<ffffffff805621c0>] hcd_buffer_alloc+0x50/0x90 [<ffffffff805547fd>] usb_buffer_alloc+0x2d/0x40 [<ffffffffa0056763>] uvc_alloc_urb_buffers+0x53/0xf0 [uvcvideo] [<ffffffffa0056958>] uvc_init_video+0x158/0x3e0 [uvcvideo] [<ffffffffa0056c17>] uvc_video_enable+0x37/0x80 [uvcvideo] [<ffffffffa0055853>] uvc_v4l2_do_ioctl+0x723/0x1260 [uvcvideo] [<ffffffff8026dd61>] ? trace_hardirqs_off_caller+0x21/0xc0 [<ffffffff8026dd61>] ? trace_hardirqs_off_caller+0x21/0xc0 [<ffffffffa0032c9f>] video_usercopy+0x19f/0x390 [videodev] [<ffffffffa0055130>] ? uvc_v4l2_do_ioctl+0x0/0x1260 [uvcvideo] [<ffffffff8026d0ce>] ? put_lock_stats+0xe/0x30 [<ffffffffa0054dad>] uvc_v4l2_ioctl+0x4d/0x80 [uvcvideo] [<ffffffffa0045083>] native_ioctl+0x83/0x90 [compat_ioctl32] [<ffffffffa004534e>] v4l_compat_ioctl32+0x2be/0x1da4 [compat_ioctl32] [<ffffffff806aad21>] ? do_page_fault+0x3d1/0xae0 [<ffffffff80270ccd>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff80270c59>] ? trace_hardirqs_on_caller+0x149/0x1b0 [<ffffffff80270ccd>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff80329afa>] compat_sys_ioctl+0x8a/0x3c0 [<ffffffff806a700d>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff8022f816>] sysenter_dispatch+0x7/0x2c [<ffffffff806a6fce>] ? trace_hardirqs_on_thunk+0x3a/0x3f Mem-Info: Node 0 DMA per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 CPU 1: hi: 0, btch: 1 usd: 0 Node 0 DMA32 per-cpu: CPU 0: hi: 186, btch: 31 usd: 3 CPU 1: hi: 186, btch: 31 usd: 0 Node 0 Normal per-cpu: CPU 0: hi: 186, btch: 31 usd: 23 CPU 1: hi: 186, btch: 31 usd: 179 Active:78545 inactive:48683 dirty:31 writeback:0 unstable:2 free:830202 slab:17516 mapped:17473 pagetables:3496 bounce:0 Node 0 DMA free:36kB min:28kB low:32kB high:40kB active:0kB inactive:0kB present:15156kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 3207 3956 3956 Node 0 DMA32 free:3197192kB min:6512kB low:8140kB high:9768kB active:0kB inactive:0kB present:3284896kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 748 748 Node 0 Normal free:123580kB min:1516kB low:1892kB high:2272kB active:314180kB inactive:194732kB present:766464kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 Node 0 DMA: 1*4kB 0*8kB 0*16kB 1*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 36kB Node 0 DMA32: 4*4kB 3*8kB 2*16kB 3*32kB 4*64kB 5*128kB 3*256kB 5*512kB 4*1024kB 5*2048kB 776*4096kB = 3197224kB Node 0 Normal: 14*4kB 14*8kB 8*16kB 6*32kB 1*64kB 3*128kB 3*256kB 2*512kB 4*1024kB 1*2048kB 28*4096kB = 123560kB 64847 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 502752kB Total swap = 502752kB 1048576 pages RAM 52120 pages reserved 71967 pages shared 143004 pages non-shared --- [2] BUG: unable to handle kernel NULL pointer dereference at 00000000000002c8 IP: [<ffffffff8046c84c>] map_single+0x1c/0x280 PGD 10e54e067 PUD 10e595067 PMD 0 Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Modules linked in: kvm_intel kvm microcode uvcvideo compat_ioctl32 videodev v4l1_compat shpchp pci_hotplug Pid: 5895, comm: skype Not tainted 2.6.27-rc6-235c-debug #1 RIP: 0010:[<ffffffff8046c84c>] [<ffffffff8046c84c>] map_single+0x1c/0x280 RSP: 0018:ffff88010e78d988 EFLAGS: 00210296 RAX: 0000780000000000 RBX: 0000000000000000 RCX: 0000000000000002 RDX: 0000000000005000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88010e78d9e8 R08: 0000000000000000 R09: 0000000000000001 R10: ffff88010e78d698 R11: 0000000000000001 R12: 0000000000000002 R13: 0000000000000000 R14: 0000000000005000 R15: ffff88012f1c9968 FS: 0000000000000000(0000) GS:ffffffff80a6cdc0(0063) knlGS:00000000f6355b90 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000000002c8 CR3: 000000010e57d000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process skype (pid: 5895, threadinfo ffff88010e78c000, task ffff88012b9cc460) Stack: 0000000200000000 0000000000005000 0000000000000000 0000000000000000 00000000000017b8 0000000000000000 ffff88010e78d9c8 0000000000000000 0000000000000002 0000000000000000 0000000000005000 ffff88012f1c9968 Call Trace: [<ffffffff8046cbb0>] swiotlb_map_single_attrs+0x60/0xf0 [<ffffffff8046cc4c>] swiotlb_map_single+0xc/0x10 [<ffffffff8046cdee>] swiotlb_alloc_coherent+0xfe/0x180 [<ffffffff80212731>] dma_alloc_coherent+0x281/0x310 [<ffffffff805621c0>] hcd_buffer_alloc+0x50/0x90 [<ffffffff805547fd>] usb_buffer_alloc+0x2d/0x40 [<ffffffffa0056763>] uvc_alloc_urb_buffers+0x53/0xf0 [uvcvideo] [<ffffffffa0056958>] uvc_init_video+0x158/0x3e0 [uvcvideo] [<ffffffffa0056c17>] uvc_video_enable+0x37/0x80 [uvcvideo] [<ffffffffa0055853>] uvc_v4l2_do_ioctl+0x723/0x1260 [uvcvideo] [<ffffffff8026dd61>] ? trace_hardirqs_off_caller+0x21/0xc0 [<ffffffff8026dd61>] ? trace_hardirqs_off_caller+0x21/0xc0 [<ffffffffa0032c9f>] video_usercopy+0x19f/0x390 [videodev] [<ffffffffa0055130>] ? uvc_v4l2_do_ioctl+0x0/0x1260 [uvcvideo] [<ffffffff8026d0ce>] ? put_lock_stats+0xe/0x30 [<ffffffffa0054dad>] uvc_v4l2_ioctl+0x4d/0x80 [uvcvideo] [<ffffffffa0045083>] native_ioctl+0x83/0x90 [compat_ioctl32] [<ffffffffa004534e>] v4l_compat_ioctl32+0x2be/0x1da4 [compat_ioctl32] [<ffffffff806aad21>] ? do_page_fault+0x3d1/0xae0 [<ffffffff80270ccd>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff80270c59>] ? trace_hardirqs_on_caller+0x149/0x1b0 [<ffffffff80270ccd>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff80329afa>] compat_sys_ioctl+0x8a/0x3c0 [<ffffffff806a700d>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff8022f816>] sysenter_dispatch+0x7/0x2c [<ffffffff806a6fce>] ? trace_hardirqs_on_thunk+0x3a/0x3f Code: 45 31 c0 48 89 e5 e8 a4 ff ff ff c9 c3 66 90 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 38 48 89 75 b0 48 89 55 a8 89 4d a4 <48> 8b 87 c8 02 00 00 48 85 c0 0f 84 1c 02 00 00 48 8b 58 08 48 RIP [<ffffffff8046c84c>] map_single+0x1c/0x280 RSP <ffff88010e78d988> CR2: 00000000000002c8 ---[ end trace 5d15baeeb7025a0e ]--- --- [3] ffffffff8046c830 <map_single>: map_single(): /store/kernel/linux/lib/swiotlb.c:291 ffffffff8046c830: 55 push %rbp ffffffff8046c831: 48 89 e5 mov %rsp,%rbp ffffffff8046c834: 41 57 push %r15 ffffffff8046c836: 41 56 push %r14 ffffffff8046c838: 41 55 push %r13 ffffffff8046c83a: 41 54 push %r12 ffffffff8046c83c: 53 push %rbx ffffffff8046c83d: 48 83 ec 38 sub $0x38,%rsp ffffffff8046c841: 48 89 75 b0 mov %rsi,-0x50(%rbp) ffffffff8046c845: 48 89 55 a8 mov %rdx,-0x58(%rbp) ffffffff8046c849: 89 4d a4 mov %ecx,-0x5c(%rbp) dma_get_seg_boundary(): /store/kernel/linux/include/linux/dma-mapping.h:80 ffffffff8046c84c: 48 8b 87 c8 02 00 00 mov 0x2c8(%rdi),%rax <---- --- [4] Signed-off-by:
Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Masoud Sharbiani authored
git commit 74811f35 causes crash at module load (or boot) time on my machine with a hpt374 controller. The reason for this is that for initializing second controller which sets (hwif->dev == host->dev[1]) to true (1), adds 1 to a void ptr, which advances it by one byte instead of advancing it by sizeof(hpt_info) bytes. Because of this, all initialization functions get corrupted data in info variable which causes a crash at boot time. This patch fixes that and makes my machine boot again. The card itself is a HPT374 raid conroller: Here is the lspci -v output: 03:06.0 RAID bus controller: HighPoint Technologies, Inc. HPT374 (rev 07) Subsystem: HighPoint Technologies, Inc. Unknown device 0001 Flags: bus master, 66MHz, medium devsel, latency 120, IRQ 28 I/O ports at 8000 [size=8] I/O ports at 7800 [size=4] I/O ports at 7400 [size=8] I/O ports at 7000 [size=4] I/O ports at 6800 [size=256] Expansion ROM at fe8e0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 03:06.1 RAID bus controller: HighPoint Technologies, Inc. HPT374 (rev 07) Subsystem: HighPoint Technologies, Inc. Unknown device 0001 Flags: bus master, 66MHz, medium devsel, latency 120, IRQ 28 I/O ports at 9800 [size=8] I/O ports at 9400 [size=4] I/O ports at 9000 [size=8] I/O ports at 8800 [size=4] I/O ports at 8400 [size=256] Capabilities: [60] Power Management version 2 Signed-off-by:
Masoud Sharbiani <masouds@google.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Andrew Morton <akpm@linux-foundation.org> [bart: use dev_get_drvdata() per Sergei's suggestion] Signed-off-by:
-
Paul E. McKenney authored
Make ia64 refrain from clearing a given to-be-offlined CPU's bit in the cpu_online_mask until it has processed pending irqs. This change prevents other CPUs from being blindsided by an apparently offline CPU nevertheless changing globally visible state. Also remove the existing redundant cpu_clear(cpu, cpu_online_map). Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Tony Luck <tony.luck@intel.com>
-
Julia Lawall authored
Error handling code following a kmalloc should free the allocated data. Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Robin Holt authored
bte.h expects a #define of L1_CACHE_MASK which is currently only in bte.c. This small patch gets bte.h to include cleanly and makes BTE_UNALIGNED_COPY not report errors. Signed-off-by:
-
James Bottomley authored
Broke the non modular builds by moving an essential function into modules.c. Fix this by moving it out again and into asm/sections.h as an inline. To do this, the definitions of struct fdesc and struct got_val have been lifted out of modules.c and put in asm/elf.h where they belong. Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
