- 20 Jun, 2024 3 commits
-
-
AngeloGioacchino Del Regno authored
Add a compatible for MediaTek MT8188 RDMA, which supports only a subset of the MDP3 components of its similar MT8195 counterpart. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Hans Verkuil authored
Merge tag 'tags/media-next-uvc-20240617-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git into media_stage uvcvideo fixes and improvements: - add/fix quirks - improve timestamp handling - improve Power Line Frequency handling Signed-off-by:
-
Jeff Johnson authored
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/rc/rc-core.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
- 17 Jun, 2024 8 commits
-
-
Ricardo Ribalda authored
We do not have any quirk device making us of this. Remove from now. It can be easily reverted later if needed. Signed-off-by:
Ricardo Ribalda <ribalda@chromium.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Ricardo Ribalda authored
We can use heuristics to figure out the proper range of the control instead of quirking every single device. Reviewed-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by:
-
Ricardo Ribalda authored
We do not have more version specific mappings. Let's remove this code for now. It can be easily reverted later if needed. Reviewed-by:
-
Ricardo Ribalda authored
The UVC 1.5 standard defines 4 values for the PLF control: Off, 50Hz, 60Hz and Auto. But it does not clearly define if all the values must be implemented or not. Instead of just using the UVC version to determine what the PLF control can do, probe it. Reviewed-by:
-
Ricardo Ribalda authored
Move the PLF mapping logic to its own mapping filter function. This commit does not introduce any new functionality to the logic, it is just a preparation patch. Reviewed-by:
-
Ricardo Ribalda authored
Some advanced controls might not be completely implemented by vendors. If the controls are a enumeration, UVC does not gives a way to probe what is implemented and what is not. Let's create a new callback function where heuristics can be implemented to detect what is implemented and what not and update the control mapping accordingly. Reviewed-by:
-
Michal Pecio authored
The bandwidth fixup quirk doesn't know that SuperSpeed exists and has the same 8 service intervals per millisecond as High Speed, hence its calculations are wrong. Assume that all speeds from HS up use 8 intervals per millisecond. No further changes are needed, updated code has been confirmed to work with all speeds from FS to SS. Signed-off-by:
Michal Pecio <michal.pecio@gmail.com> Reviewed-by:
-
Laurent Pinchart authored
The Quanta ACER HD User Facing camera reports a UVC 1.50 version, but implements UVC 1.0a as shown by the UVC probe control being 26 bytes long. Force the UVC version for that device. Reported-by:
Giuliano Lotta <giuliano.lotta@gmail.com> Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2000947 Link: https://lore.kernel.org/r/20230115205210.20077-1-laurent.pinchart@ideasonboard.comTested-by:
-
- 16 Jun, 2024 10 commits
-
-
Daniel Schaefer authored
When the UVC device has a control that is readonly it doesn't set the SET_CUR flag. For example the privacy control has SET_CUR flag set in the defaults in the `uvc_ctrls` variable. Even if the device does not have it set, it's not cleared by uvc_ctrl_get_flags(). Originally written with assignment in commit 859086ae ("media: uvcvideo: Apply flags from device to actual properties"). But changed to |= in commit 0dc68cab ("media: uvcvideo: Prevent setting unavailable flags"). It would not clear the default flags. With this patch applied the correct flags are reported to user space. Tested with: ``` > v4l2-ctl --list-ctrls | grep privacy privacy 0x009a0910 (bool) : default=0 value=0 flags=read-only ``` Signed-off-by:
Daniel Schaefer <dhs@frame.work> Fixes: 0dc68cab ("media: uvcvideo: Prevent setting unavailable flags") Reviewed-by:
-
Ricardo Ribalda authored
Struct uvc_frame and interval (u32*) are packaged together on streaming->formats on a single contiguous allocation. Right now they are allocated right after uvc_format, without taking into consideration their required alignment. This is working fine because both structures have a field with a pointer, but it will stop working when the sizeof() of any of those structs is not a multiple of the sizeof(void*). Enforce that alignment during the allocation. Signed-off-by:
-
Oleksandr Natalenko authored
Similarly to Logitech C922, C920 seems to also suffer from a firmware bug that breaks hardware timestamping. Add a quirk for this camera model too. Before applying the quirk: ``` 100 (4) [-] none 100 200717 B 212.919114 213.079004 33.727 fps ts mono/SoE 101 (5) [-] none 101 200889 B 213.003703 213.114996 11.822 fps ts mono/SoE 102 (6) [-] none 102 200926 B 213.035571 213.146999 31.379 fps ts mono/SoE 103 (7) [-] none 103 200839 B 213.067424 213.179003 31.394 fps ts mono/SoE 104 (0) [-] none 104 200692 B 213.293180 213.214991 4.430 fps ts mono/SoE 105 (1) [-] none 105 200937 B 213.322374 213.247001 34.254 fps ts mono/SoE 106 (2) [-] none 106 201013 B 213.352228 213.279005 33.496 fps ts mono/SoE … ``` After applying the quirk: ``` 154 (2) [-] none 154 192417 B 42.199823 42.207788 27.779 fps ts mono/SoE 155 (3) [-] none 155 192040 B 42.231834 42.239791 31.239 fps ts mono/SoE 156 (4) [-] none 156 192213 B 42.263823 42.271822 31.261 fps ts mono/SoE 157 (5) [-] none 157 191981 B 42.299824 42.303827 27.777 fps ts mono/SoE 158 (6) [-] none 158 191953 B 42.331835 42.339811 31.239 fps ts mono/SoE 159 (7) [-] none 159 191904 B 42.363824 42.371813 31.261 fps ts mono/SoE 160 (0) [-] none 160 192210 B 42.399834 42.407801 27.770 fps ts mono/SoE ``` Fixes: 5d0fd3c8 ("[media] uvcvideo: Disable hardware timestamps by default") Signed-off-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Reviewed-by:
-
Ricardo Ribalda authored
The function uvc_video_clock_update() supports a single SOF overflow. Or in other words, the maximum difference between the first ant the last timestamp can be 4096 ticks or 4.096 seconds. This results in a maximum value for y2 of: 0x12FBECA00, that overflows 32bits. y2 = (u32)ktime_to_ns(ktime_sub(last->host_time, first->host_time)) + y1; Extend the size of y2 to u64 to support all its values. Without this patch: # yavta -s 1920x1080 -f YUYV -t 1/5 -c /dev/video0 Device /dev/v4l/by-id/usb-Shine-Optics_Integrated_Camera_0001-video-index0 opened. Device `Integrated Camera: Integrated C' on `usb-0000:00:14.0-6' (driver 'uvcvideo') supports video, capture, without mplanes. Video format set: YUYV (56595559) 1920x1080 (stride 3840) field none buffer size 4147200d Video format: YUYV (56595559) 1920x1080 (stride 3840) field none buffer size 4147200d Current frame rate: 1/5 Setting frame rate to: 1/5 Frame rate set: 1/5 8 buffers requested. length: 4147200d offset: 0 timestamp type/source: mono/SoE Buffer 0/0 mapped at address 0x7947ea94c000. length: 4147200d offset: 4149248 timestamp type/source: mono/SoE Buffer 1/0 mapped at address 0x7947ea557000. length: 4147200d offset: 8298496 timestamp type/source: mono/SoE Buffer 2/0 mapped at address 0x7947ea162000. length: 4147200d offset: 12447744 timestamp type/source: mono/SoE Buffer 3/0 mapped at address 0x7947e9d6d000. length: 4147200d offset: 16596992 timestamp type/source: mono/SoE Buffer 4/0 mapped at address 0x7947e9978000. length: 4147200d offset: 20746240 timestamp type/source: mono/SoE Buffer 5/0 mapped at address 0x7947e9583000. length: 4147200d offset: 24895488 timestamp type/source: mono/SoE Buffer 6/0 mapped at address 0x7947e918e000. length: 4147200d offset: 29044736 timestamp type/source: mono/SoE Buffer 7/0 mapped at address 0x7947e8d99000. 0 (0) [-] none 0 4147200d B 507.554210 508.874282 242.836 fps ts mono/SoE 1 (1) [-] none 2 4147200d B 508.886298 509.074289 0.751 fps ts mono/SoE 2 (2) [-] none 3 4147200d B 509.076362 509.274307 5.261 fps ts mono/SoE 3 (3) [-] none 4 4147200d B 509.276371 509.474336 5.000 fps ts mono/SoE 4 (4) [-] none 5 4147200d B 509.476394 509.674394 4.999 fps ts mono/SoE 5 (5) [-] none 6 4147200d B 509.676506 509.874345 4.997 fps ts mono/SoE 6 (6) [-] none 7 4147200d B 509.876430 510.074370 5.002 fps ts mono/SoE 7 (7) [-] none 8 4147200d B 510.076434 510.274365 5.000 fps ts mono/SoE 8 (0) [-] none 9 4147200d B 510.276421 510.474333 5.000 fps ts mono/SoE 9 (1) [-] none 10 4147200d B 510.476391 510.674429 5.001 fps ts mono/SoE 10 (2) [-] none 11 4147200d B 510.676434 510.874283 4.999 fps ts mono/SoE 11 (3) [-] none 12 4147200d B 510.886264 511.074349 4.766 fps ts mono/SoE 12 (4) [-] none 13 4147200d B 511.070577 511.274304 5.426 fps ts mono/SoE 13 (5) [-] none 14 4147200d B 511.286249 511.474301 4.637 fps ts mono/SoE 14 (6) [-] none 15 4147200d B 511.470542 511.674251 5.426 fps ts mono/SoE 15 (7) [-] none 16 4147200d B 511.672651 511.874337 4.948 fps ts mono/SoE 16 (0) [-] none 17 4147200d B 511.873988 512.074462 4.967 fps ts mono/SoE 17 (1) [-] none 18 4147200d B 512.075982 512.278296 4.951 fps ts mono/SoE 18 (2) [-] none 19 4147200d B 512.282631 512.482423 4.839 fps ts mono/SoE 19 (3) [-] none 20 4147200d B 518.986637 512.686333 0.149 fps ts mono/SoE 20 (4) [-] none 21 4147200d B 518.342709 512.886386 -1.553 fps ts mono/SoE 21 (5) [-] none 22 4147200d B 517.909812 513.090360 -2.310 fps ts mono/SoE 22 (6) [-] none 23 4147200d B 517.590775 513.294454 -3.134 fps ts mono/SoE 23 (7) [-] none 24 4147200d B 513.298465 513.494335 -0.233 fps ts mono/SoE 24 (0) [-] none 25 4147200d B 513.510273 513.698375 4.721 fps ts mono/SoE 25 (1) [-] none 26 4147200d B 513.698904 513.902327 5.301 fps ts mono/SoE 26 (2) [-] none 27 4147200d B 513.895971 514.102348 5.074 fps ts mono/SoE 27 (3) [-] none 28 4147200d B 514.099091 514.306337 4.923 fps ts mono/SoE 28 (4) [-] none 29 4147200d B 514.310348 514.510567 4.734 fps ts mono/SoE 29 (5) [-] none 30 4147200d B 514.509295 514.710367 5.026 fps ts mono/SoE 30 (6) [-] none 31 4147200d B 521.532513 514.914398 0.142 fps ts mono/SoE 31 (7) [-] none 32 4147200d B 520.885277 515.118385 -1.545 fps ts mono/SoE 32 (0) [-] none 33 4147200d B 520.411140 515.318336 -2.109 fps ts mono/SoE 33 (1) [-] none 34 4147200d B 515.325425 515.522278 -0.197 fps ts mono/SoE 34 (2) [-] none 35 4147200d B 515.538276 515.726423 4.698 fps ts mono/SoE 35 (3) [-] none 36 4147200d B 515.720767 515.930373 5.480 fps ts mono/SoE Cc: stable@vger.kernel.org Fixes: 66847ef0 ("[media] uvcvideo: Add UVC timestamps support") Signed-off-by:
-
Ricardo Ribalda authored
In UVC 1.5 we get a single clock value per frame. With the current buffer size of 32, FPS slowers than 32 might roll-over twice. The current code cannot handle two roll-over and provide invalid timestamps. Revome all the samples from the circular buffer that are more than two rollovers old, so the algorithm always provides good timestamps. Note that we are removing values that are more than one second old, which means that there is enough distance between the two points that we use for the interpolation to provide good values. Tested-by:
HungNien Chen <hn.chen@sunplusit.com> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Ricardo Ribalda authored
Isolate all the changes related to the clock circular buffer to its own function, that way we can make changes easier to the buffer logic. Also simplify the lock, by removing the circular buffer clock handling from uvc_video_clock_decode(). And now that we are at it, unify the API of the clock functions. Tested-by:
-
Ricardo Ribalda authored
With UVC 1.5 we get as little as one clock sample per frame. Which means that it takes 32 frames to move from the software timestamp to the hardware timestamp method. This results in abrupt changes in the timestamping after 32 frames (~1 second), resulting in noticeable artifacts when used for encoding. With this patch we modify the update algorithm to work with whatever amount of values are available. Tested-by:
-
Ricardo Ribalda authored
Logitech C922 internal SOF does not increases at a stable rate of 1kHz. This causes that the device_sof and the host_sof run at different rates, breaking the clock domain conversion algorithm. Eg: 30 (6) [-] none 30 614400 B 21.245557 21.395214 34.133 fps ts mono/SoE 31 (7) [-] none 31 614400 B 21.275327 21.427246 33.591 fps ts mono/SoE 32 (0) [-] none 32 614400 B 21.304739 21.459256 34.000 fps ts mono/SoE 33 (1) [-] none 33 614400 B 21.334324 21.495274 33.801 fps ts mono/SoE * 34 (2) [-] none 34 614400 B 21.529237 21.527297 5.130 fps ts mono/SoE * 35 (3) [-] none 35 614400 B 21.649416 21.559306 8.321 fps ts mono/SoE 36 (4) [-] none 36 614400 B 21.678789 21.595320 34.045 fps ts mono/SoE ... 99 (3) [-] none 99 614400 B 23.542226 23.696352 33.541 fps ts mono/SoE 100 (4) [-] none 100 614400 B 23.571578 23.728404 34.069 fps ts mono/SoE 101 (5) [-] none 101 614400 B 23.601425 23.760420 33.504 fps ts mono/SoE * 102 (6) [-] none 102 614400 B 23.798324 23.796428 5.079 fps ts mono/SoE * 103 (7) [-] none 103 614400 B 23.916271 23.828450 8.478 fps ts mono/SoE 104 (0) [-] none 104 614400 B 23.945720 23.860479 33.957 fps ts mono/SoE Instead of disabling completely the hardware timestamping for such hardware we take the assumption that the packet handling jitter is under 2ms and use the host_sof as dev_sof. We can think of the UVC hardware clock as a system with a coarse clock (the SOF) and a fine clock (the PTS). The coarse clock can be replaced with a clock on the same frequency, if the jitter of such clock is smaller than its sampling rate. That way we can save some of the precision of the fine clock. To probe this point we have run three experiments on the Logitech C922. On that experiment we run the camera at 33fps and we analyse the difference in msec between a frame and its predecessor. If we display the histogram of that value, a thinner histogram will mean a better meassurement. The results for: - original hw timestamp: https://ibb.co/D1HJJ4x - pure software timestamp: https://ibb.co/QC9MgVK - modified hw timestamp: https://ibb.co/8s9dBdk This bug in the camera firmware has been confirmed by the vendor. lsusb -v Bus 001 Device 044: ID 046d:085c Logitech, Inc. C922 Pro Stream Webcam Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x046d Logitech, Inc. idProduct 0x085c C922 Pro Stream Webcam bcdDevice 0.16 iManufacturer 0 iProduct 2 C922 Pro Stream Webcam iSerial 1 80B912DF bNumConfigurations 1 Reviewed-by:
-
Ricardo Ribalda authored
Some SunplusIT cameras took a borderline interpretation of the UVC 1.5 standard, and fill the PTS and SCR fields with invalid data if the package does not contain data. "STC must be captured when the first video data of a video frame is put on the USB bus." Some SunplusIT devices send, e.g., buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000 buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000 buffer: 0xa7755c00 len 000668 header:0x8c stc 73779dba sof 070c pts 7376d37a While the UVC specification meant that the first two packets shouldn't have had the SCR bit set in the header. This borderline/buggy interpretation has been implemented in a variety of devices, from directly SunplusIT and from other OEMs that rebrand SunplusIT products. So quirking based on VID:PID will be problematic. All the affected modules have the following extension unit: VideoControl Interface Descriptor: guidExtensionCode {82066163-7050-ab49-b8cc-b3855e8d221d} But the vendor plans to use that GUID in the future and fix the bug, this means that we should use heuristic to figure out the broken packets. This patch takes care of this. lsusb of one of the affected cameras: Bus 001 Device 003: ID 1bcf:2a01 Sunplus Innovation Technology Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.01 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1bcf Sunplus Innovation Technology Inc. idProduct 0x2a01 bcdDevice 0.02 iManufacturer 1 SunplusIT Inc iProduct 2 HanChen Wise Camera iSerial 3 01.00.00 bNumConfigurations 1 Tested-by: -
Ricardo Ribalda authored
The tail of the list lives at the position before the head. This is mathematically noted as: ``` (head-1) mod size. ``` Unfortunately C, does not have a modulus operator, but a remainder operator (%). The reminder operation has a different result than the modulus if (head -1) is a negative number and size is not a power of two. Adding size to (head-1) allows the code to run with any value of size. This does not change the current behaviour of the driver, as the size is always a power of two, but avoid tedious debugging if we ever change its size. Reviewed-by:
-
- 15 Jun, 2024 19 commits
-
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/v4l2-core/v4l2-async.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/v4l2-core/v4l2-fwnode.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Abdulrasaq Lawani authored
Replace instance of of_node_put with __free(device_node) to protect against any memory leaks due to future changes in control flow. Signed-off-by:
Abdulrasaq Lawani <abdulrasaqolawani@gmail.com> Acked-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
-
Benjamin Mugnier authored
Rename 'st-vgxy61' to 'vgxy61', dropping the vendor prefix to follow the same naming scheme as the vast majority of device drivers. The device tree binding does not fall into binding rename exceptions and therefore must not be changed. Keep its legacy name. Signed-off-by:
Benjamin Mugnier <benjamin.mugnier@foss.st.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Conor Dooley authored
It was reported to me that the imx219 didn't work on one of our development kits partly because the access sequence is incorrect. The datasheet I could find [1] for this camera has the access sequence: Seq. No. Address (Hex) data 1 30EB 05 2 30EB 0C 3 300A FF 4 300B FF 5 30EB 05 6 30EB 09 but the driver swaps the first two elements. Laurent pointed out on IRC that the original code used the correct sequence for 1920x1080 but the current sequence for 3280x2464 and 1640x1232. During refactoring of the init sequence the current order was used for all formats. Switch to using the documented sequence. Link: https://www.opensourceinstruments.com/Electronics/Data/IMX219PQ.pdf [1] Fixes: 85084559 ("media: i2c: imx219: Split common registers from mode tables") Fixes: 1283b3b8 ("media: i2c: Add driver for Sony IMX219 sensor") Signed-off-by:
-
Hans de Goede authored
The ov2680 driver has 9 controls now and the call to v4l2_ctrl_new_fwnode_properties() adds 2 more. Tell v4l2_ctrl_handler_init() to pre-allocate space for 11 controls to match this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
The out of tree IPU6 driver comes with its own copy of the ipu-bridge code. It also comes bundled with standard v4l2 sensor drivers. Many of these have been mainlined and the rest is being mainlined but not all are upstream yet. The latest version of the out of tree code now will use the mainline kernel ipu-bridge version when build against new enough kernels. This however breaks support for (bundled) sensor drivers which do not (yet) have an entry in the mainline ipu-bridge code. Add the missing entries to the mainline ipu-bridge code to make the transition to having everything in mainline easier. The alternative HID for the OV13B10 and the OV08x40 entries both are for sensors already supported in mainline which were missing. The downside of adding these HIDs is that this will cause the IPU3 / IPU6 drivers to delay registering there /dev/video# nodes until a sensor driver has bound, which for the non mainline drivers may never happen. This is not really an issue because almost all IPU designs only have front (user) facing sensors and all the added HIDs are for the main RGB (not IR) sensor. So if the sensor driver is missing then the user can already not use the camera and adding these HIDs does not really change that. Signed-off-by:
-
Hans de Goede authored
Sort the sensors in ipu_supported_sensors[] by ACPI HID rather then having them in some random order. While at it also use the correct (same as datasheet) capitalization for the sensor names in the comments. Instead of sometimes writing OV#### and sometimes ov####. Signed-off-by:
-
Tommaso Merciai authored
Into alvium cameras REG_BCRM_GAIN_RW control the analog gain. Let's use the right V4L2_CID_ANALOGUE_GAIN ctrl. Fixes: 0a7af872 ("media: i2c: Add support for alvium camera") Cc: stable@vger.kernel.org Signed-off-by:
Tommaso Merciai <tomm.merciai@gmail.com> Signed-off-by:
-
Tommaso Merciai authored
Implement the enum_frame_size pad operation. The sensor supports a continuous size range of resolutions. Signed-off-by:
-
Tommaso Merciai authored
Alvium camera by default is in free running mode. Datasheet say that acquisition frame rate reg can only be used if frame start trigger mode is set to off. Enable r/w acquisition frame rate and turn off trigger mode. Signed-off-by:
-
Tommaso Merciai authored
Acquisition frame rate enable reg have a very long name let's reduce this with an abbreviation. Signed-off-by:
-
Tommaso Merciai authored
Instead of reading device_fw reg as multiple regs let's read the entire 64bit reg using one i2c read and use bit masks and bit shifts to get fw info. Signed-off-by:
-
Wentong Wu authored
The privacy status is maintained by privacy_ctrl, on which all of the privacy status changes will go through, so there is no point in maintaining one more element any more. Reported-by:
Hao Yao <hao.yao@intel.com> Signed-off-by:
Wentong Wu <wentong.wu@intel.com> Tested-by:
Jason Chen <jason.z.chen@intel.com> Signed-off-by:
-
Wentong Wu authored
Prior to the ongoing command privacy is on, it would return -1 to indicate the current privacy status, and the ongoing command would be well executed by firmware as well, so this is not error. This patch changes its behavior to notify privacy on directly by V4L2 privacy control instead of reporting error. Fixes: 29006e19 ("media: pci: intel: ivsc: Add CSI submodule") Cc: stable@vger.kernel.org # for 6.6 and later Reported-by:
-
Wentong Wu authored
There're possibilities that privacy status change notification happens in the middle of the ongoing mei command which already takes the command lock, but v4l2_ctrl_s_ctrl() would also need the same lock prior to this patch, so this may results in circular locking problem. This patch adds one dedicated lock for v4l2 control handler to avoid described issue. Fixes: 29006e19 ("media: pci: intel: ivsc: Add CSI submodule") Cc: stable@vger.kernel.org # for 6.6 and later Reported-by:
-
Ricardo Ribalda authored
Replace the older style one-element array with a flexible array member. There does not seem to be any allocation for these structs in the code, so no more code changes are required. The following cocci warnings are fixed: drivers/media/dvb-frontends/mxl5xx_defs.h:182:4-8: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/media/dvb-frontends/mxl5xx_defs.h:171:4-8: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) Signed-off-by:
-
Ricardo Ribalda authored
clang 19 complains about the missing parameter name. Let's add it. drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-debugfs.h:19:62: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions] Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406050908.1kL1C69p-lkp@intel.com/ Fixes: e22b4973 ("media: c8sectpfe: Do not depend on DEBUG_FS") Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
Jeff Johnson authored
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/tuners/tda9887.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Jeff Johnson authored
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/radio/si470x/radio-si470x-common.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
