The header file crypto/algapi.h is for internal use only.  Use the
header file crypto/utils.h instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/E1qYlA0-006vFr-Ts@formenos.hmeau.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Commit 8399918f ("staging: wilc1000: use RCU list to maintain vif interfaces list")
removed wilc_get_interface() but not its declaration.
Commit 9bc061e8 ("staging: wilc1000: added support to dynamically add/remove interfaces")
declared but never implemented wilc_cfg_alloc() and wilc_netdev_interface().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230819102100.13720-1-yuehaibing@huawei.com

In 'mwifiex_handle_uap_rx_forward()', always check the value
returned by 'skb_copy()' to avoid potential NULL pointer
dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop
original skb in case of copying failure.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 838e4f44 ("mwifiex: improve uAP RX handling")
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230814095041.16416-1-dmantipov@yandex.ru

In the vendor driver, the current channel power is queried from
EEPROM_TXPOWER_BG1 and EEPROM_TXPOWER_BG2. And then the mixed value
will be written into the low half-word of the TX_ALC_CFG_0 register.
The high half-word of the TX_ALC_CFG_0 is a fixed value 0x2f2f.

We can't get the accurate TX power. Based on my tests and the new
MediaTek mt76 driver source code, the real TX power is approximately
equal to channel_power + (max) rate_power. Usually max rate_power is
the gain of the OFDM 6M rate, which can be readed from the offset
EEPROM_TXPOWER_BYRATE +1.

Based on these eeprom values, this patch adds basic TX power control
for the MT7620 and limits its maximum TX power. This can avoid the
link speed decrease caused by chip overheating. rt2800_config_alc()
function has also been renamed to rt2800_config_alc_rt6352() because
it's only used by RT6352 (MT7620).

Notice:
It's still need some work to sync the max channel power to the user
interface. This part is missing from the rt2x00 driver framework. If
we set the power exceed the calibration value, it won't take effect.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/TYAP286MB03159090ED14044215E59FD6BC10A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM

Use the helper function devm_kmemdup() rather than duplicating its
implementation, which helps to enhance code readability.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230810114939.2104013-1-lizetao1@huawei.com

No need cast (void*) to (struct rsi_91x_usbdev *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073606.3667062-1-yunchuan@nfschina.com

No need cast (void*) to (struct rsi_91x_usbdev *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073558.3666936-1-yunchuan@nfschina.com

No need cast (void*) to (struct rsi_91x_sdiodev *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073550.3666829-1-yunchuan@nfschina.com

No need cast (void*) to (struct rsi_91x_sdiodev *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073539.3666735-1-yunchuan@nfschina.com

No need cast (void*) to (struct rsi_common *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073529.3666653-1-yunchuan@nfschina.com

No need cast (struct rsi_hw *) to (struct rsi_hw *),
or cast (struct rsi_common *) to (struct rsi_common *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073517.3666559-1-yunchuan@nfschina.com

No need cast (struct rsi_hw *) to (struct rsi_hw *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073507.3666471-1-yunchuan@nfschina.com

No need cast (void*) to (struct rsi_91x_sdiodev *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073455.3666306-1-yunchuan@nfschina.com

No need cast (void*) to (struct rsi_coex_ctrl_block *) or
(struct rsi_common *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073440.3666204-1-yunchuan@nfschina.com

The kernel-doc script identified multiple issues in ieee80211.h, so
fix them. In the process update some references to the latest
applicable specification.

include/linux/ieee80211.h:848: warning: Function parameter or member 'count' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:848: warning: Function parameter or member 'period' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:848: warning: Function parameter or member 'duration' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:848: warning: Function parameter or member 'offset' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'token' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'mode' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'type' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'request' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:871: warning: Function parameter or member 'mode' not described in 'ieee80211_channel_sw_ie'
include/linux/ieee80211.h:871: warning: Function parameter or member 'new_ch_num' not described in 'ieee80211_channel_sw_ie'
include/linux/ieee80211.h:871: warning: Function parameter or member 'count' not described in 'ieee80211_channel_sw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'mode' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'new_operating_class' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'new_ch_num' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'count' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_ttl' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_flags' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_reason' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_pre_value' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:913: warning: Function parameter or member 'new_channel_width' not described in 'ieee80211_wide_bw_chansw_ie'
include/linux/ieee80211.h:913: warning: Function parameter or member 'new_center_freq_seg0' not described in 'ieee80211_wide_bw_chansw_ie'
include/linux/ieee80211.h:913: warning: Function parameter or member 'new_center_freq_seg1' not described in 'ieee80211_wide_bw_chansw_ie'
include/linux/ieee80211.h:926: warning: expecting prototype for struct ieee80211_tim. Prototype was for struct ieee80211_tim_ie instead
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_psel' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_pmetric' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_congest' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_synch' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_auth' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_form' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_cap' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:964: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * mesh channel switch parameters element's flag indicator
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_flags' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_hopcount' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_ttl' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_addr' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_seq' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_interval' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_metric' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:1019: warning: expecting prototype for enum ieee80211_opmode_bits. Prototype was for enum ieee80211_vht_opmode_bits instead
include/linux/ieee80211.h:1052: warning: Function parameter or member 'tx_power' not described in 'ieee80211_tpc_report_ie'
include/linux/ieee80211.h:1052: warning: Function parameter or member 'link_margin' not described in 'ieee80211_tpc_report_ie'
include/linux/ieee80211.h:1073: warning: Function parameter or member 'compat_info' not described in 'ieee80211_s1g_bcn_compat_ie'
include/linux/ieee80211.h:1073: warning: Function parameter or member 'beacon_int' not described in 'ieee80211_s1g_bcn_compat_ie'
include/linux/ieee80211.h:1073: warning: Function parameter or member 'tsf_completion' not described in 'ieee80211_s1g_bcn_compat_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'ch_width' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'oper_class' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'primary_ch' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'oper_ch' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'basic_mcs_nss' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1097: warning: Function parameter or member 'aid' not described in 'ieee80211_aid_response_ie'
include/linux/ieee80211.h:1097: warning: Function parameter or member 'switch_count' not described in 'ieee80211_aid_response_ie'
include/linux/ieee80211.h:1097: warning: Function parameter or member 'response_int' not described in 'ieee80211_aid_response_ie'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_STATUS' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_MINOR_REASON' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_CAPABILITY' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_DEVICE_ID' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GO_INTENT' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GO_CONFIG_TIMEOUT' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_LISTEN_CHANNEL' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GROUP_BSSID' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_EXT_LISTEN_TIMING' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_INTENDED_IFACE_ADDR' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_MANAGABILITY' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_CHANNEL_LIST' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_ABSENCE_NOTICE' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_DEVICE_INFO' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GROUP_INFO' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GROUP_ID' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_INTERFACE' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_OPER_CHANNEL' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_INVITE_FLAGS' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_VENDOR_SPECIFIC' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_MAX' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'frame_control' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'duration' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'ra' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'ta' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'control' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'start_seq_num' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1579: warning: Function parameter or member 'reserved' not described in 'ieee80211_mcs_info'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'cap_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'ampdu_params_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'mcs' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'extended_ht_cap_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'tx_BF_cap_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'antenna_selection_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'primary_chan' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'ht_param' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'operation_mode' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'stbc_param' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'basic_set' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1872: warning: Function parameter or member 'mac_cap_info' not described in 'ieee80211_he_cap_elem'
include/linux/ieee80211.h:1872: warning: Function parameter or member 'phy_cap_info' not described in 'ieee80211_he_cap_elem'
include/linux/ieee80211.h:1936: warning: Function parameter or member 'he_oper_params' not described in 'ieee80211_he_operation'
include/linux/ieee80211.h:1936: warning: Function parameter or member 'he_mcs_nss_set' not described in 'ieee80211_he_operation'
include/linux/ieee80211.h:1936: warning: Function parameter or member 'optional' not described in 'ieee80211_he_operation'
include/linux/ieee80211.h:1948: warning: Function parameter or member 'he_sr_control' not described in 'ieee80211_he_spr'
include/linux/ieee80211.h:1948: warning: Function parameter or member 'optional' not described in 'ieee80211_he_spr'
include/linux/ieee80211.h:1960: warning: Function parameter or member 'aifsn' not described in 'ieee80211_he_mu_edca_param_ac_rec'
include/linux/ieee80211.h:1960: warning: Function parameter or member 'ecw_min_max' not described in 'ieee80211_he_mu_edca_param_ac_rec'
include/linux/ieee80211.h:1960: warning: Function parameter or member 'mu_edca_timer' not described in 'ieee80211_he_mu_edca_param_ac_rec'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'mu_qos_info' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_be' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_bk' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_vi' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_vo' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:2194: warning: Enum value 'IEEE80211_REG_LPI_AP' not described in enum 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Enum value 'IEEE80211_REG_SP_AP' not described in enum 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Enum value 'IEEE80211_REG_VLP_AP' not described in enum 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Excess enum value 'IEEE80211_REG_SP' description in 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Excess enum value 'IEEE80211_REG_VLP' description in 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Excess enum value 'IEEE80211_REG_LPI' description in 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2577: warning: cannot understand function prototype: 'struct ieee80211_he_6ghz_oper '
include/linux/ieee80211.h:2624: warning: Function parameter or member 'tx_power_info' not described in 'ieee80211_tx_pwr_env'
include/linux/ieee80211.h:2624: warning: Function parameter or member 'tx_power' not described in 'ieee80211_tx_pwr_env'
include/linux/ieee80211.h:4485: warning: expecting prototype for RSNX Capabilities(). Prototype was for WLAN_RSNX_CAPA_PROTECTED_TWT() instead
include/linux/ieee80211.h:4734: warning: expecting prototype for ieee80211_mle_get_eml_sync_delay(). Prototype was for ieee80211_mle_get_eml_med_sync_delay() instead
117 warnings as Errors
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230822-kerneldoc-v1-1-0d42ce5029bf@quicinc.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

This reverts commit b970ac68 ("wifi: mac80211_hwsim: check the
return value of nla_put_u32") since it introduced a memory leak in
the error path, which seems worse than sending an incomplete skb,
and the put can't fail anyway since the SKB was just allocated.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

While looking at a bug, I got rather confused by the layout of the
'status' field in ieee80211_tx_info. Apparently, the intention is that
status_driver_data[] is used for driver specific data, and fills up the
size of the union to 40 bytes, just like the other ones.

This is indeed what actually happens, but only because of the
combination of two mistakes:

 - "void *status_driver_data[18 / sizeof(void *)];" is intended
   to be 18 bytes long but is actually two bytes shorter because of
   rounding-down in the division, to a multiple of the pointer
   size (4 bytes or 8 bytes).

 - The other fields combined are intended to be 22 bytes long, but
   are actually 24 bytes because of padding in front of the
   unaligned tx_time member, and in front of the pointer array.

The two mistakes cancel out. so the size ends up fine, but it seems
more helpful to make this explicit, by having a multiple of 8 bytes
in the size calculation and explicitly describing the padding.

Fixes: ea5907db ("mac80211: fix struct ieee80211_tx_info size")
Fixes: 02219b3a ("mac80211: add WMM admission control support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230623152443.2296825-2-arnd@kernel.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Add description for struct member 'agg' to prevent a kernel-doc
warning.

mac80211.h:2289: warning: Function parameter or member 'agg' not described in 'ieee80211_link_sta'

Fixes: 4c51541d ("wifi: mac80211: keep A-MSDU data in sta and per-link")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Benjamin Berg <benjamin.berg@intel.com>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20230710230312.31197-10-rdunlap@infradead.org
[reword the kernel-doc comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Fix a typo (82011 -> 80211) to prevent a kernel-doc warning.
Add one missing function parameter description to prevent a
kernel-doc warning.

ieee80211_radiotap.h:52: warning: expecting prototype for struct ieee82011_radiotap_header. Prototype was for struct ieee80211_radiotap_header instead
ieee80211_radiotap.h:581: warning: Function parameter or member 'data' not described in 'ieee80211_get_radiotap_len'

Fixes: 42f82e2e ("wireless: radiotap: rewrite the radiotap header file")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20230710230312.31197-7-rdunlap@infradead.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Drop an unused (extra) enum value to prevent a kernel-doc warning.

cfg80211.h:1492: warning: Excess enum value 'STATION_PARAM_APPLY_STA_TXPOWER' description in 'station_parameters_apply_mask'

Fixes: 2d8b08fe ("wifi: cfg80211: fix kernel-doc warnings all over the file")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20230710230312.31197-3-rdunlap@infradead.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Fix and hopefully improve documentation for 'flag' fields of
a few types by adding references to relevant enumerations.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20230713132957.275859-1-dmantipov@yandex.ruSigned-off-by: Johannes Berg <johannes.berg@intel.com>

nl80211_pmsr_dump_results() is never implemented since it was added in
commit 9bb7e0f2 ("cfg80211: add peer measurement with FTM initiator
API").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230729121651.36836-1-yuehaibing@huawei.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Commit ccf80ddf ("mac80211: mesh function and data structures
definitions") introducted this but never implemented it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230731140712.1204-1-yuehaibing@huawei.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Commit 68542962 ("mac80211: Fix circular locking dependency in
ARP filter handling") left the ieee80211_set_arp_filter() declaration
unused.
And commit 164eb02d ("mac80211: add radar detection command/event")
introducted ieee80211_dfs_cac_timer() declaration but never implemented
it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230801134337.24452-1-yuehaibing@huawei.com
[reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Commit 55682965 ("[NL80211]: add netlink interface to cfg80211")
declared but never implemented this, remove it.
Commit 11433ee4 ("[WEXT]: Move to net/wireless") rename net/core/wireless.c
to net/wireless/wext.c, then commit 3d23e349 ("wext: refactor") refactor
wext.c to wext-core.c, fix the wext comment.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807145032.44768-1-yuehaibing@huawei.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

The previous commit dd3e4fc7 ("nl80211/cfg80211: add BSS color to
NDP ranging parameters") adds a parameter for NDP ranging by introducing
a new attribute type named NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR.

However, the author forgot to also describe the nla_policy at
nl80211_pmsr_ftm_req_attr_policy (net/wireless/nl80211.c). Just
complement it to avoid malformed attribute that causes out-of-attribute
access.

Fixes: dd3e4fc7 ("nl80211/cfg80211: add BSS color to NDP ranging parameters")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809033151.768910-1-linma@zju.edu.cnSigned-off-by: Johannes Berg <johannes.berg@intel.com>

The nlmsg_free() ends up calling kfree_skb(), and kfree_skb() is not allowed to be called
from hardware interrupt context or with hardware interrupts being disabled. Replace the
mistaken usage of nlmsg_free() by dev_kfree_skb_irq(), which is safe in both cases.
Signed-off-by: EN-WEI WU <enweiwu@FreeBSD.org>
Link: https://lore.kernel.org/r/20230815095427.13589-1-enweiwu@FreeBSD.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Code inspection reveals that we switch the puncturing bitmap
before the real channel switch, since that happens only in
the second round of the worker after the channel context is
switched by ieee80211_link_use_reserved_context().

Fixes: 2cc25e4b ("wifi: mac80211: configure puncturing bitmap")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

While technically some control frames like ACK are shorter and
end after Address 1, such frames shouldn't be forwarded through
wmediumd or similar userspace, so require the full 3-address
header to avoid accessing invalid memory if shorter frames are
passed in.

Reported-by: syzbot+b2645b5bf1512b81fa22@syzkaller.appspotmail.com
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When probing a client, first check if we have it, and then
check for the channel context, otherwise you can trigger
the warning there easily by probing when the AP isn't even
started yet. Since a client existing means the AP is also
operating, we can then keep the warning.

Also simplify the moved code a bit.

Reported-by: syzbot+999fac712d84878a7379@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If there's no OCB state, don't ask the driver/mac80211 to
leave, since that's just confusing. Since set/clear the
chandef state, that's a simple check.

Reported-by: syzbot+09d1cd2f71e6dd3bfd2c@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If the AP uses our own address as its MLD address or BSSID, then
clearly something's wrong. Reject such connections so we don't
try and fail later.

Reported-by: syzbot+2676771ed06a6df166ad@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Before checking the action code, check that it even
exists in the frame.

Reported-by: syzbot+be9c824e6f269d608288@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In case the SAP connection is established before the interface is
added, the mac address is still not set. Don't send the nic info
SAP message in this case since it will result in sending an invalid
mac address. The nic info message will be sent with a valid mac
address when the interface is added.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230822103048.a49436bed387.I0ca88d72456e6e9f939bbc2e0c52ffb173fbc97e@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When wiamt is disabled the driver up SAP message is not sent, so
there is no need to send the driver down message as well.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230822103048.100f41b84656.I583d3e18ea65793f53aa710af13e47f8af82b53d@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

The HOST_GOES_DOWN message should be sent even if wiamt is disabled.
Otherwise wiamt may still use the shared memory (e.g. if enabled
later) while it's no longer valid.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230822103048.2baad50eb1c3.If7b7c1dc2d6bfc6bacf7f6c72972f19714d9d973@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

SAP messages should not be sent when AMT is disabled.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230822103048.db16b55c27c1.I48834c14f5af8d31792f5048b3023509cba191dd@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

In case CSME holds the NIC and SAP connection is already established,
iwl_pcie_prepare_card_hw() during iwl_pci_probe() will fail
(which is fine since CSME will release the nic later when asked with
a SAP message). In this case tring to grab nic access to read the
crf ids will fail with a warning.
Avoid the warning by only trying to read the crf ids in case prepare
card succeeded.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230822103048.9b026fa7b97e.I12bea7e6eef54eeeaf916b68d71583e92ff310fd@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

LMAC error table address was checked against UMAC
error table minimum address defined. Because of that,
the LMAC error table was not read, since both addresses
belong to different ranges. As addresses are updated from
FW alive message and should be correct, this check is not
needed.

Still keep the check for address 0 to avoid NULL address read.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.08ab1497904d.I270d4c5bcc23c5ecd0b7db475501032c450852ad@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Support TX flush on AP interfaces so that we will do a
proper flush for frames on the queue before keys are
removed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.f4b749b91ec2.Ia8381bd4f7d47592e74387c564739798a01c4049@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>