- 20 Feb, 2023 40 commits
-
-
Chuck Lever authored
Now that all vs_dispatch functions invoke svcxdr_init_encode(), it is common code and can be pushed down into the generic RPC server. Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com>
-
Chuck Lever authored
RFC 5531 defines an MSG_ACCEPTED Reply message like this: struct accepted_reply { opaque_auth verf; union switch (accept_stat stat) { case SUCCESS: ... In the current server code, struct opaque_auth encoding is open- coded. Introduce a helper that encodes an opaque_auth data item within the context of a xdr_stream. Done as part of hardening the server-side RPC header decoding and encoding paths. Reviewed-by: -
Chuck Lever authored
There's no RPC header field called rpc_stat; more precisely, the variable appears to be recording an accept_stat value. But it looks like we don't need to preserve this value at all, actually, so simply remove the variable. Reviewed-by:
-
Chuck Lever authored
Commit 5b304bc5 ("[PATCH] knfsd: svcrpc: gss: fix failure on SVC_DENIED in integrity case") added a check to prevent wrapping an RPC response if reply_stat == MSG_DENIED, assuming that the only way to get to svcauth_gss_release() with that reply_stat value was if the reject_stat was AUTH_ERROR (reject_stat == MISMATCH is handled earlier in svc_process_common()). The code there is somewhat confusing. For one thing, rpc_success is an accept_stat value, not a reply_stat value. The correct reply_stat value to look for is RPC_MSG_DENIED. It happens to be the same value as rpc_success, so it all works out, but it's not terribly readable. Since commit 438623a0 ("SUNRPC: Add svc_rqst::rq_auth_stat"), the actual auth_stat value is stored in the svc_rqst, so that value is now available to svcauth_gss_prepare_to_wrap() to make its decision to wrap, based on direct information about the authentication status of the RPC caller. No behavior change is intended, this simply replaces some old code with something that should be more self-documenting. Reviewed-by:
-
Chuck Lever authored
Actually xdr_stream does not add value here because of how gss_wrap() works. This is just a clean-up patch. Reviewed-by:
-
Chuck Lever authored
Simplify the references to the head and tail iovecs for readability. Reviewed-by:
-
Chuck Lever authored
Match the error reporting in the other unwrap and wrap functions. Reviewed-by:
-
Chuck Lever authored
Clean up variable names to match the other unwrap and wrap functions. Additionally, the explicit type cast on @gsd in unnecessary; and @resbuf is renamed to match the variable naming in the unwrap functions. Reviewed-by:
-
Chuck Lever authored
Done as part of hardening the server-side RPC header decoding path. Reviewed-by:
-
Chuck Lever authored
Replace finicky logic: Instead of trying to find scratch space in the response buffer, use the scratch buffer from struct gss_svc_data. Reviewed-by:
-
Chuck Lever authored
An error computing the checksum here is an exceptional event. Reviewed-by:
-
Chuck Lever authored
Clean up: To help orient readers, name the stack variables to match the XDR field names. Additionally, the explicit type cast on @gsd is unnecessary; and @resbuf is renamed to match the variable naming in the unwrap functions. Reviewed-by:
-
Chuck Lever authored
Now that upper layers use an xdr_stream to track the construction of each RPC Reply message, resbuf->len is kept up-to-date automatically. There's no need to recompute it in svc_gss_release(). Reviewed-by:
-
Jeff Layton authored
The WARN_ON_ONCE check is not terribly useful. It also seems possible for nfs4_find_file to race with the destruction of an fi_deleg_file while trying to take a reference to it. Now that it's safe to pass nfs_get_file a NULL pointer, remove the WARN and NULL pointer check. Take the fi_lock when fetching fi_deleg_file. Cc: NeilBrown <neilb@suse.de> Signed-off-by:
-
Jeff Layton authored
...and remove some now-useless NULL pointer checks in its callers. Suggested-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Dai Ngo authored
Currently nfsd4_setup_inter_ssc returns the vfsmount of the source server's export when the mount completes. After the copy is done nfsd4_cleanup_inter_ssc is called with the vfsmount of the source server and it searches nfsd_ssc_mount_list for a matching entry to do the clean up. The problems with this approach are (1) the need to search the nfsd_ssc_mount_list and (2) the code has to handle the case where the matching entry is not found which looks ugly. The enhancement is instead of nfsd4_setup_inter_ssc returning the vfsmount, it returns the nfsd4_ssc_umount_item which has the vfsmount embedded in it. When nfsd4_cleanup_inter_ssc is called it's passed with the nfsd4_ssc_umount_item directly to do the clean up so no searching is needed and there is no need to handle the 'not found' case. Signed-off-by:
Dai Ngo <dai.ngo@oracle.com> Signed-off-by:
Olga Kornievskaia <kolga@netapp.com>
-
Chuck Lever authored
Now the entire RPC Call header parsing path is handled via struct xdr_stream-based decoders. Reviewed-by:
-
Chuck Lever authored
Clean up: With xdr_stream decoding, the @argv parameter is no longer used. Reviewed-by:
-
Chuck Lever authored
Done as part of hardening the server-side RPC header decoding path. Reviewed-by:
-
Chuck Lever authored
Clean up: Saving the RPC program number in two places is unnecessary. Reviewed-by:
-
Chuck Lever authored
Clean up: Group these together for legibility. Reviewed-by:
-
Chuck Lever authored
Now that each ->accept method has been converted to use xdr_stream, the svcxdr_init_decode() calls can be hoisted back up into the generic RPC server code. The dprintk in svc_authenticate() is removed, since trace_svc_authenticate() reports the same information. Reviewed-by:
-
Chuck Lever authored
Done as part of hardening the server-side RPC header decoding path. Reviewed-by:
-
Chuck Lever authored
Micro-optimizations: 1. The value of rqstp->rq_auth_stat is replaced no matter which arm of the switch is taken, so the initial assignment can be safely removed. 2. Avoid checking the value of gc->gc_proc twice in the I/O (RPC_GSS_PROC_DATA) path. The cost is a little extra code redundancy. Reviewed-by:
-
Chuck Lever authored
Done as part of hardening the server-side RPC header decoding path. Reviewed-by:
-
Chuck Lever authored
Done as part of hardening the server-side RPC header decoding path. Reviewed-by:
-
Chuck Lever authored
Clean up: To help orient readers, name the stack variables to match the XDR field names. Reviewed-by:
-
Chuck Lever authored
Done as part of hardening the server-side RPC header decoding path. Reviewed-by:
-
Chuck Lever authored
Clean up: To help orient readers, name the stack variables to match the XDR field names. For readability, I'm also going to rename the unwrap and wrap functions in a consistent manner, starting with unwrap_integ_data(). Reviewed-by:
-
Chuck Lever authored
Clean up / code de-duplication - this functionality is already available in the generic XDR layer. Reviewed-by:
-
Chuck Lever authored
The entire RPC_GSS_PROC_INIT path is converted over to xdr_stream for decoding the Call credential and verifier. Done as part of hardening the server-side RPC header decoding path. Reviewed-by:
-
Chuck Lever authored
gss_read_verf() is already short. Fold it into its only caller. Reviewed-by:
-
Chuck Lever authored
gss_read_common_verf() is now just a wrapper for dup_netobj(), thus it can be replaced with direct calls to dup_netobj(). Reviewed-by:
-
Chuck Lever authored
Pre-requisite to replacing gss_read_common_verf(). Reviewed-by:
-
Chuck Lever authored
Since upcalls are infrequent, ensure the compiler places the upcall mechanism out-of-line from the I/O path. Reviewed-by:
-
Chuck Lever authored
Done as part of hardening the server-side RPC header decoding path. Reviewed-by:
-
Chuck Lever authored
Done as part of hardening the server-side RPC header decoding path. Since the server-side of the Linux kernel SunRPC implementation ignores the contents of the Call's machinename field, there's no need for its RPC_AUTH_UNIX authenticator to reject names that are larger than UNX_MAXNODENAME. Reviewed-by:
-
Chuck Lever authored
Done as part of hardening the server-side RPC header decoding path. Reviewed-by:
-
Chuck Lever authored
RFC 5531 defines the body of an RPC Call message like this: struct call_body { unsigned int rpcvers; unsigned int prog; unsigned int vers; unsigned int proc; opaque_auth cred; opaque_auth verf; /* procedure-specific parameters start here */ }; In the current server code, decoding a struct opaque_auth type is open-coded in several places, and is thus difficult to harden everywhere. Introduce a helper for decoding an opaque_auth within the context of a xdr_stream. This helper can be shared with all authentication flavor implemenations, even on the client-side. Done as part of hardening the server-side RPC header decoding paths. Reviewed-by: -
Chuck Lever authored
Refactor: So that the overhaul of each ->accept method can be done in separate smaller patches, temporarily move the svcxdr_init_decode() call into those methods. Reviewed-by:
-
