- 15 Mar, 2013 3 commits
-
-
Stephen Boyd authored
Scorpion processors have always been v7 CPUs. Fix the Kconfig text to reflect this. Reported-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
git://github.com/hzhuang1/linuxArnd Bergmann authored
From Haojian Zhuang <haojian.zhuang@gmail.com>: * 'armsoc/fix' of git://github.com/hzhuang1/linux: ARM: mmp: add platform_device head file in gplugd Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Haojian Zhuang authored
arch/arm/mach-mmp/gplugd.c: In function ‘gplugd_init’: arch/arm/mach-mmp/gplugd.c:188:2: error: implicit declaration of function ‘platform_device_register’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[1]: *** [arch/arm/mach-mmp/gplugd.o] Error 1 make: *** [arch/arm/mach-mmp] Error 2 So append platform_device.h to resolve build issue. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
-
- 14 Mar, 2013 8 commits
-
-
Arnd Bergmann authored
These are part of a longer series that has been submitted some time ago for the frame buffer tree, but it was never accepted there. The first two of the five patches are bug fixes, so let's merge this through arm-soc to get a working 3.9 kernel for at91. * commit '67cf9c0a': ARM: at91: fix LCD-wiring mode atmel_lcdfb: fix 16-bpp modes on older SOCs Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge branch 'v3.9-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim <kgene.kim@samsung.com>: * 'v3.9-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Add dma-cells for generic dma binding support for PL330 ARM: S5PV210: Fix PL330 DMA controller clkdev entries Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
git://github.com/at91linux/linux-at91Arnd Bergmann authored
From Nicolas Ferre <nicolas.ferre@atmel.com>: Two patches for Device Tree on at91sam9x5/NAND. Two more for fixing PM suspend/resume IRQ on AIC5 and GPIO used with pinctrl. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: fix infinite loop in at91_irq_suspend/resume ARM: at91: add gpio suspend/resume support when using pinctrl ARM: at91: dt: at91sam9x5: complete NAND pinctrl ARM: at91: dt: at91sam9x5: correct NAND pins comments Includes an update to -rc2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
ARM normally has an accurate clock source, so we can theoretically use analog joysticks more accurately and at the same time avoid the build warning #warning Precise timer not defined for this architecture. from the joystick driver. Now, why anybody would use that driver no ARM I have no idea, but Ben Dooks enabled it in the s3c2410_defconfig along with a bunch of other drivers, even though that platform has neither ISA nor PCI support. It still seems to be the right thing to fix this quirk. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Ben Dooks <ben-linux@fluff.org>
-
Arnd Bergmann authored
56bc911a "[media] s5p-fimc: Redefine platform data structure for fimc-is" changed the bus_type member of struct fimc_source_info treewide, but got one instance wrong in mach-s5pv210, which was evidently not even build tested. This adds the missing change to get s5pv210_defconfig to build again. Applies on the Mauro's media tree. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Arnd Bergmann authored
Patch 72480014 "Fix device clock divisor calculations" was apparently rebased incorrectly before it got upstream, causing a build error. Replacing the "prate" pointer with the local parent_rate is most likely the correct solution. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Mike Turquette <mturquette@linaro.org>
-
Ludovic Desroches authored
Fix an infinite loop when suspending or resuming a device with AIC5. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Ludovic Desroches authored
gpio suspend/resume and wakeup sources where not managed when using pinctrl so it was impossible to wake up the system with a gpio. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
- 13 Mar, 2013 4 commits
-
-
Johan Hovold authored
Fix regression introduced by commit 787f9fd2 ("atmel_lcdfb: support 16bit BGR:565 mode, remove unsupported 15bit modes") which broke 16-bpp modes for older SOCs which use IBGR:555 (msb is intensity) rather than BGR:565. The above commit removes the RGB:555-wiring hack by removing the no longer used ATMEL_LCDC_WIRING_RGB555 define. Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Johan Hovold authored
Fix regression introduced by commit 787f9fd2 ("atmel_lcdfb: support 16bit BGR:565 mode, remove unsupported 15bit modes") which broke 16-bpp modes for older SOCs which use IBGR:555 (msb is intensity) rather than BGR:565. Use SOC-type to determine the pixel layout. Tested on at91sam9263 and at91sam9g45. Cc: <stable@vger.kernel.org> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Richard Genoud authored
There was only chip enable and readdy/busy pins for the nand controller. This add the rest of the pins. pinctrl_nand_16bits contains the specific muxes for 16 bits NANDs. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Richard Genoud authored
Comments on NAND pins where inverted. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
- 12 Mar, 2013 3 commits
-
-
Arnd Bergmann authored
Merge tag 'davinci-for-v3.9-rc/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes Via Sekhar Nori <nsekhar@ti.com>: This patch fixes a boot breakage on DA830 that was introduced with EDMA DMA engine conversion. The bug has been there since v3.7 and has been marked for stable update. * tag 'davinci-for-v3.9-rc/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Matt Porter authored
This adds additional error checking to the private edma api implementation to catch the case where the edma_alloc_slot() has an invalid controller parameter. The edma dmaengine wrapper driver relies on this condition being handled in order to avoid setting up a second edma dmaengine instance on DA830. Verfied using a DA850 with the second EDMA controller platform instance removed to simulate a DA830 which only has a single EDMA controller. Reported-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Matt Porter <mporter@ti.com> Cc: stable@vger.kernel.org # v3.7.x+ Tested-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
-
Arnd Bergmann authored
The definitions have move around recently, causing build errors in spear3xx for all configurations: spear3xx.c:47:5: error: 'PL080_BSIZE_16' undeclared here (not in a function) spear3xx.c:47:23: error: 'PL080_CONTROL_SB_SIZE_SHIFT' undeclared here (not in a function) spear3xx.c:48:22: error: 'PL080_CONTROL_DB_SIZE_SHIFT' undeclared here (not in a function) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Rubini <rubini@gnudd.com> Cc: Viresh Kumar <viresh.kumar@linaro.org>
-
- 11 Mar, 2013 7 commits
-
-
Padmavathi Venna authored
This patch adds #dma-cells property to PL330 DMA controller nodes for supporting generic dma dt bindings on SOCFPGA platform. #dma-channels and #dma-requests are not required now but added in advance. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
git://git.infradead.org/users/jcooper/linuxArnd Bergmann authored
mvebu fixes for v3.9 from Jason Cooper <jason@lakedaemon.net>: The first four patches: 89c58c19 rtc: rtc-mv: Add support for clk to avoid lockups de88747f gpio: mvebu: Add clk support to prevent lockup 7bf5b408 ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels 93fff4ce ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency are Cc'd to stable since they were held over from the previous merge window. The rest are a small collection of fixes and a couple of devicetree conversion catchups. * tag 'mvebu_fixes_for_v3.9' of git://git.infradead.org/users/jcooper/linux: arm: mach-orion5x: fix typo in compatible string of a .dts file arm: mvebu: fix address-cells in mpic DT node arm: plat-orion: fix address decoding when > 4GB is used arm: mvebu: Reduce reg-io-width with UARTs ARM: Dove: add RTC device node arm: mvebu: enable the USB ports on Armada 370 Reference Design board ARM: dove: drop "select COMMON_CLK_DOVE" rtc: rtc-mv: Add support for clk to avoid lockups gpio: mvebu: Add clk support to prevent lockup ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
git://git.linaro.org/people/shawnguo/linux-2.6Arnd Bergmann authored
From Shawn Guo <shawn.guo@linaro.org>: The 2nd take of imx fixes for 3.9: - Fix pll1_sys clk initial status - Fix a typo in imx DEBUG_LL Kconfig * tag 'imx-fixes-3.9-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART" ARM: imx: pll1_sys should be an initial on clk Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
git://git.linaro.org/people/shawnguo/linux-2.6Arnd Bergmann authored
From Shawn Guo <shawn.guo@linaro.org>: The 2nd mxs fixes for 3.9: - Fix an error caused by incorrect conflict resolution when applying the patch * tag 'mxs-fixes-3.9-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: cfa10049: Fix fb initialisation function Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Maxime Ripard authored
When building a multiplatform kernel, we could end up with a smaller number of GPIOs than the one required by the platform the kernel was running on. Sort the max GPIO number by descending order so that we always take the highest number required. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Paul Bolle authored
Commit f8c95fe6 (ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs) had a typo that DEBUG_IMX50_IMX53_UART should be DEBUG_IMX53_UART. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
We always boot from PLL1, so let's have pll1_sys in the clks_init_on list to have clk prepare/enable use count match the hardware status, so that drivers managing pll1_sys like cpufreq can get the use count right from the start. Reported-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- 10 Mar, 2013 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull namespace bugfixes from Eric Biederman: "This is three simple fixes against 3.9-rc1. I have tested each of these fixes and verified they work correctly. The userns oops in key_change_session_keyring and the BUG_ON triggered by proc_ns_follow_link were found by Dave Jones. I am including the enhancement for mount to only trigger requests of filesystem modules here instead of delaying this for the 3.10 merge window because it is both trivial and the kind of change that tends to bit-rot if left untouched for two months." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc: Use nd_jump_link in proc_ns_follow_link fs: Limit sys_mount to only request filesystem modules (Part 2). fs: Limit sys_mount to only request filesystem modules. userns: Stop oopsing in key_change_session_keyring
-
- 09 Mar, 2013 5 commits
-
-
Linus Torvalds authored
There is a more complete atmel patch-series out by Nick Dyer that fixes this and other things, but in the meantime this is the minimal thing to get the touchscreen going on (at least my) Pixel Chromebook. Not that I want my dirty fingers near that beautiful screen, but it seems that a non-initialized touchscreen will also end up being a constant wakeup source, so you have to disable it to go to sleep. And it's easier to just fix the initialization sequence. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric W. Biederman authored
Update proc_ns_follow_link to use nd_jump_link instead of just manually updating nd.path.dentry. This fixes the BUG_ON(nd->inode != parent->d_inode) reported by Dave Jones and reproduced trivially with mkdir /proc/self/ns/uts/a. Sigh it looks like the VFS change to require use of nd_jump_link happend while proc_ns_follow_link was baking and since the common case of proc_ns_follow_link continued to work without problems the need for making this change was overlooked. Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "These are scattered fixes and one performance improvement. The biggest functional change is in how we throttle metadata changes. The new code bumps our average file creation rate up by ~13% in fs_mark, and lowers CPU usage. Stefan bisected out a regression in our allocation code that made balance loop on extents larger than 256MB." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: improve the delayed inode throttling Btrfs: fix a mismerge in btrfs_balance() Btrfs: enforce min_bytes parameter during extent allocation Btrfs: allow running defrag in parallel to administrative tasks Btrfs: avoid deadlock on transaction waiting list Btrfs: do not BUG_ON on aborted situation Btrfs: do not BUG_ON in prepare_to_reloc Btrfs: free all recorded tree blocks on error Btrfs: build up error handling for merge_reloc_roots Btrfs: check for NULL pointer in updating reloc roots Btrfs: fix unclosed transaction handler when the async transaction commitment fails Btrfs: fix wrong handle at error path of create_snapshot() when the commit fails Btrfs: use set_nlink if our i_nlink is 0
-
Benson Leung authored
Add basic platform data to get the current upstream driver working with the 224s touchpad and 1664s touchscreen. We will be using NULL config so we will use the settings from the devices' NVRAMs. Signed-off-by: Benson Leung <bleung@chromium.org> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Kurtz authored
This same driver can be used by atmel based touchscreens and touchpads (buttonpads). Platform data may specify a device is a touchpad using the is_tp flag. This will cause the driver to perform some touchpad specific initializations, such as: * register input device name "Atmel maXTouch Touchpad" instead of Touchscreen. * register BTN_LEFT & BTN_TOOL_* event types. * register axis resolution (as a fixed constant, for now) * register BUTTONPAD property * process GPIO buttons using reportid T19 Input event GPIO mapping is done by the platform data key_map array. key_map[x] should contain the KEY or BTN code to send when processing GPIOx from T19. To specify a GPIO as not an input source, populate with KEY_RESERVED, or 0. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 08 Mar, 2013 8 commits
-
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French: "A small set of cifs fixes which includes one for a recent regression in the write path (pointed out by Anton), some fixes for rename problems and as promised for 3.9 removing the obsolete sockopt mount option (and the accompanying deprecation warning)." * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix missing of oplock_read value in smb30_values structure cifs: don't try to unlock pagecache page after releasing it cifs: remove the sockopt= mount option cifs: Check server capability before attempting silly rename cifs: Fix bug when checking error condition in cifs_rename_pending_delete()
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: alpha: boot: fix build breakage introduced by system.h disintegration memcg: initialize kmem-cache destroying work earlier Randy has moved ksm: fix m68k build: only NUMA needs pfn_to_nid dmi_scan: fix missing check for _DMI_ signature in smbios_present() Revert parts of "hlist: drop the node parameter from iterators" idr: remove WARN_ON_ONCE() on negative IDs mm/mempolicy.c: fix sp_node_init() argument ordering mm/mempolicy.c: fix wrong sp_node insertion ipc: don't allocate a copy larger than max ipc: fix potential oops when src msg > 4k w/ MSG_COPY
-
Will Deacon authored
Commit ec221208 ("Disintegrate asm/system.h for Alpha") removed the system.h include from boot/head.S, which puts the PAL_* asm constants out of scope. Include <asm/pal.h> so we can get building again. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: David Rusling <david.rusling@linaro.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Konstantin Khlebnikov authored
Fix a warning from lockdep caused by calling cancel_work_sync() for uninitialized struct work. This path has been triggered by destructon kmem-cache hierarchy via destroying its root kmem-cache. cache ffff88003c072d80 obj ffff88003b410000 cache ffff88003c072d80 obj ffff88003b924000 cache ffff88003c20bd40 INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 2825, comm: insmod Tainted: G O 3.9.0-rc1-next-20130307+ #611 Call Trace: __lock_acquire+0x16a2/0x1cb0 lock_acquire+0x8a/0x120 flush_work+0x38/0x2a0 __cancel_work_timer+0x89/0xf0 cancel_work_sync+0xb/0x10 kmem_cache_destroy_memcg_children+0x81/0xb0 kmem_cache_destroy+0xf/0xe0 init_module+0xcb/0x1000 [kmem_test] do_one_initcall+0x11a/0x170 load_module+0x19b0/0x2320 SyS_init_module+0xc6/0xf0 system_call_fastpath+0x16/0x1b Example module to demonstrate: #include <linux/module.h> #include <linux/slab.h> #include <linux/mm.h> #include <linux/workqueue.h> int __init mod_init(void) { int size = 256; struct kmem_cache *cache; void *obj; struct page *page; cache = kmem_cache_create("kmem_cache_test", size, size, 0, NULL); if (!cache) return -ENOMEM; printk("cache %p\n", cache); obj = kmem_cache_alloc(cache, GFP_KERNEL); if (obj) { page = virt_to_head_page(obj); printk("obj %p cache %p\n", obj, page->slab_cache); kmem_cache_free(cache, obj); } flush_scheduled_work(); obj = kmem_cache_alloc(cache, GFP_KERNEL); if (obj) { page = virt_to_head_page(obj); printk("obj %p cache %p\n", obj, page->slab_cache); kmem_cache_free(cache, obj); } kmem_cache_destroy(cache); return -EBUSY; } module_init(mod_init); MODULE_LICENSE("GPL"); Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Update email address and CREDITS info. xenotime.net is defunct. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Harry Wei <harryxiyou@gmail.com> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
A CONFIG_DISCONTIGMEM=y m68k config gave mm/ksm.c: In function `get_kpfn_nid': mm/ksm.c:492: error: implicit declaration of function `pfn_to_nid' linux/mmzone.h declares it for CONFIG_SPARSEMEM and CONFIG_FLATMEM, but expects the arch's asm/mmzone.h to declare it for CONFIG_DISCONTIGMEM (see arch/mips/include/asm/mmzone.h for example). Or perhaps it is only expected when CONFIG_NUMA=y: too much of a maze, and m68k got away without it so far, so fix the build in mm/ksm.c. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Petr Holasek <pholasek@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ben Hutchings authored
Commit 9f9c9cbb ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") hoisted the check for "_DMI_" into dmi_scan_machine(), which means that we don't bother to check for "_DMI_" at offset 16 in an SMBIOS entry. smbios_present() may also call dmi_present() for an address where we found "_SM_", if it failed further validation. Check for "_DMI_" in smbios_present() before calling dmi_present(). [akpm@linux-foundation.org: fix build] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Reported-by: Tim McGrath <tmhikaru@gmail.com> Tested-by: Tim Mcgrath <tmhikaru@gmail.com> Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Arnd Bergmann authored
Commit b67bfe0d ("hlist: drop the node parameter from iterators") did a lot of nice changes but also contains two small hunks that seem to have slipped in accidentally and have no apparent connection to the intent of the patch. This reverts the two extraneous changes. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-