- 22 Apr, 2020 23 commits
-
-
YueHaibing authored
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:1017:50: warning: ‘video_optimized_pixel_rates’ defined but not used [-Wunused-const-variable=] static const struct pixel_rate_range_table_entry video_optimized_pixel_rates[] = { ^~~~~~~~~~~~~~~~~~~~~~~~~~~ commit d8cd587d ("drm/amd/display: removing MODULO change for dcn2") left behind this unused vairable, remove it. Signed-off-by:YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Jason Yan authored
Fix the following gcc warning: drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/vega10_powertune.c:710:46: warning: ‘PSMGCEDCThresholdConfig_vega10’ defined but not used [-Wunused-const-variable=] static const struct vega10_didt_config_reg PSMGCEDCThresholdConfig_vega10[] = ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/vega10_powertune.c:654:46: warning: ‘PSMSEEDCThresholdConfig_Vega10’ defined but not used [-Wunused-const-variable=] static const struct vega10_didt_config_reg PSMSEEDCThresholdConfig_Vega10[] = ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Jonathan Kim authored
Vega20 arbitrates pstate at hive level and not device level. Last peer to remote buffer unmap could drop P-State while another process is still remote buffer mapped. With this fix, P-States still needs to be disabled for now as SMU bug was discovered on synchronous P2P transfers. This should be fixed in the next FW update. Signed-off-by:
Jonathan Kim <Jonathan.Kim@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Alex Deucher authored
Mirror what we do for i2c display buses. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Alex Deucher authored
We were registering the aux device in the MST late_register rather than the regular one. v2: handle eDP as well Fixes: 405a1f90 ("drm/amdgpu/display: split dp connector registration (v4)") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1100Signed-off-by:
-
Sandeep Raghuraman authored
Initialize thermal controller fields in the PowerPlay table for Hawaii GPUs, so that fan speeds are reported. Signed-off-by:
Sandeep Raghuraman <sandy.8925@gmail.com> Signed-off-by:
-
James Zhu authored
This reverts commit 3fded222 This is work around for vcn1 only. Currently vcn1 has separate begin_use and idle work handle. Signed-off-by:
James Zhu <James.Zhu@amd.com> Tested-by:
changzhu <Changfeng.Zhu@amd.com> Reviewed-by:
-
Guchun Chen authored
When running ras uncorrectable error injection and triggering GPU reset on sGPU, below issue is observed. It's caused by the list uninitialized when accessing. [ 80.047227] BUG: unable to handle page fault for address: ffffffffc0f4f750 [ 80.047300] #PF: supervisor write access in kernel mode [ 80.047351] #PF: error_code(0x0003) - permissions violation [ 80.047404] PGD 12c20e067 P4D 12c20e067 PUD 12c210067 PMD 41c4ee067 PTE 404316061 [ 80.047477] Oops: 0003 [#1] SMP PTI [ 80.047516] CPU: 7 PID: 377 Comm: kworker/7:2 Tainted: G OE 5.4.0-rc7-guchchen #1 [ 80.047594] Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018 [ 80.047888] Workqueue: events amdgpu_ras_do_recovery [amdgpu] Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
John Clements <John.Clements@amd.com> Signed-off-by:
-
Kent Russell authored
Update the list with supported Arcturus chips, but disable for now until final list is confirmed. Ideally we can poll atombios for FRU support, instead of maintaining this list of chips, but this will enable serial number reading for supported ASICs for the time-being. Signed-off-by:
Kent Russell <kent.russell@amd.com> Reviewed-by:
-
Prike Liang authored
When the amdgpu in the suspend/resume loop need notify the dpm disabled, otherwise the smu table will be uninitialize and result in resume failed. Signed-off-by:
Prike Liang <Prike.Liang@amd.com> Tested-by:
Mengbing Wang <Mengbing.Wang@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Rajneesh Bhardwaj authored
Fixes a minor typo in the file. Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by:
-
John Clements authored
reduce cmd submission to smu by caching version info Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Kent Russell authored
This reverts commit c12b84d6. The original patch causes a RAS event and subsequent kernel hard-hang when running the KFDMemoryTest.PtraceAccessInvisibleVram on VG20 and Arcturus dmesg output at hang time: [drm] RAS event of type ERREVENT_ATHUB_INTERRUPT detected! amdgpu 0000:67:00.0: GPU reset begin! Evicting PASID 0x8000 queues Started evicting pasid 0x8000 qcm fence wait loop timeout expired The cp might be in an unrecoverable state due to an unsuccessful queues preemption Failed to evict process queues Failed to suspend process 0x8000 Finished evicting pasid 0x8000 Started restoring pasid 0x8000 Finished restoring pasid 0x8000 [drm] UVD VCPU state may lost due to RAS ERREVENT_ATHUB_INTERRUPT amdgpu: [powerplay] Failed to send message 0x26, response 0x0 amdgpu: [powerplay] Failed to set soft min gfxclk ! amdgpu: [powerplay] Failed to upload DPM Bootup Levels! amdgpu: [powerplay] Failed to send message 0x7, response 0x0 amdgpu: [powerplay] [DisableAllSMUFeatures] Failed to disable all smu features! amdgpu: [powerplay] [DisableDpmTasks] Failed to disable all smu features! amdgpu: [powerplay] [PowerOffAsic] Failed to disable DPM! [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <powerplay> failed -5 Signed-off-by:
-
Alex Deucher authored
Fix screen corruption with firefox. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=207171Reviewed-by:
-
John Clements authored
Set MP1 state to prepare for unload before reloading SMU FW Reviewed-by:
-
John Clements authored
Added dedicated function to check if particular fw should be skipped from loading. Added dedicated function for SMU FW loading via PSP Reviewed-by:
-
Evan Quan authored
To fit the latest PMFW. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
-
Evan Quan authored
On the ASIC powered down(in baco or system suspend), the dpm_enabled will be set as false. Then all access (e.g. df state setting issued on RAS error event) to SMU will be blocked. Signed-off-by:
-
Evan Quan authored
As data transfer may starts immediately after i2c eeprom init completed. Thus i2c eeprom should be initialized after SMU ready. And i2c data transfer should be prohibited when SMU down. That is the i2c eeprom fini sequence needs to be updated also. Signed-off-by:
-
Evan Quan authored
To fit the latest SMC firmware 42.53 and eliminate the warning on driver loading. Signed-off-by:
-
Evan Quan authored
It can support different NV1x ASIC better. And this can guard no member got missing. Signed-off-by:
-
Prike Liang authored
The system reboot failed as some IP blocks enter power gate before perform hw resource destory. Meanwhile use unify interface to set device CGPG to ungate state can simplify the amdgpu poweroff or reset ungate guard. Fixes: 487eca11 ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)") Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Acked-by:
-
Colin Ian King authored
The variable dp_ref_clk_khz is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 13 Apr, 2020 17 commits
-
-
Jason Yan authored
Fix the following gcc warning: drivers/gpu/drm/radeon/ci_dpm.c:82:36: warning: ‘defaults_saturn_pro’ defined but not used [-Wunused-const-variable=] static const struct ci_pt_defaults defaults_saturn_pro = ^~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/ci_dpm.c:68:36: warning: ‘defaults_bonaire_pro’ defined but not used [-Wunused-const-variable=] static const struct ci_pt_defaults defaults_bonaire_pro = ^~~~~~~~~~~~~~~~~~~~ Reported-by: -
Jason Yan authored
Fix the following gcc warning: drivers/gpu/drm/radeon/si_dpm.c:255:33: warning: ‘dte_data_tahiti_le’ defined but not used [-Wunused-const-variable=] static const struct si_dte_data dte_data_tahiti_le = Reported-by:
-
Jason Yan authored
This code is dead, let's remove it. Reported-by:
-
Aurabindo Pillai authored
Let format prefixes take care of printing the module name through pr_fmt and dev_fmt definitions. Signed-off-by:
Aurabindo Pillai <mail@aurabindo.in> Signed-off-by:
-
Aurabindo Pillai authored
Define dev_fmt macro for informative print messages Signed-off-by:
-
Aurabindo Pillai authored
amdgpu uses lots of pr_* calls for printing error messages. With this prefix, errors shall be more obvious to the end use regarding its origin, and may help debugging. Prefix format: [xxx.xxxxx] amdgpu: ... Signed-off-by:
-
Jason Yan authored
Fix the following gcc warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_hw_sequencer.c:43:46: warning: ‘reg_offsets’ defined but not used [-Wunused-const-variable=] static const struct dce80_hw_seq_reg_offsets reg_offsets[] = { ^~~~~~~~~~~ Reported-by: -
Alex Deucher authored
Set up a GPU scheduler based on the ring flag rather than the ring type. Reviewed-by:
-
Alex Deucher authored
We don't want a GPU scheduler for this ring. Reviewed-by:
-
Alex Deucher authored
This allows IPs to flag whether a specific ring requires a GPU scheduler or not. E.g., sometimes instances of an IP are asymmetric and have different capabilities. Reviewed-by:
-
Likun Gao authored
Get SMC fw size before backdoor loading instead of giving an certain value, as it may different for different ASIC. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Kevin Wang <kevin1.wang@amd.com> Signed-off-by:
-
Evan Quan authored
Vram lost counter is wrongly increased by two during baco reset. V2: assumed vram lost for mode1 reset on all ASICs Signed-off-by:
-
Guchun Chen authored
Prefix RAS message printing in GFX IP with PCI device info, which assists the debug in multiple GPU case. Signed-off-by:
-
Yintian Tao authored
If there is no GPU hang, user still can access debugfs through kiq. Signed-off-by:
Yintian Tao <yttao@amd.com> Reviewed-by:
Monk Liu <Monk.liu@amd.com> Signed-off-by:
-
Guchun Chen authored
Prefix ras related kernel message logging with PCI device info by replacing DRM_INFO/WARN/ERROR with dev_info/warn/err. This can clearly tell user about GPU device information where ras is. And add some other ras message printing to make it more clear and friendly as well. Suggested-by:
-
Guchun Chen authored
Uncorrectable error count printing is missed when issuing UMC UE injection. When going to the error count log function in GPU recover work thread, there is no chance to get correct error count value by last error injection and print, because the error status register is automatically cleared after reading in UMC ecc irq callback. So add such message printing in UMC ecc irq cb to be consistent with other RAS error interrupt cases. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Sergei Lopatin authored
Should prevent flicker if PP_OVERDRIVE_MASK is set. bug: https://bugs.freedesktop.org/show_bug.cgi?id=102646 bug: https://bugs.freedesktop.org/show_bug.cgi?id=108941 bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1088 bug: https://gitlab.freedesktop.org/drm/amd/-/issues/628Signed-off-by:
Sergei Lopatin <magist3r@gmail.com> Signed-off-by:
-
