CA0132 driver had some codes to handle the S/PDIF I/O, but the actual
setups of pins and converters were missing.  Now the pins are added.

Also, fixed a few points triggering invalid codec verbs and mixer
elements since the digital I/O audio widgets on CA0132 have no amp.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Now with the workaround using codec->pcm_format_first flag, we can
clean up the home-baked codes in patch_ca0132.c.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Introduced a new flag to set up the PCM stream format at first before
the stream_id and channel tag.  Some codecs (e.g. CA0132) seem
preferring this over stream_id -> format order.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The same ID is twice in the quirk table, so the second one is not used.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Cc: <stable@vger.kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When CONFIG_SND_VERBOSE_PRINTK=y is set, the debug print in
hda_auto_parser.c looks really ugly like:

  ALSA sound/pci/hda/hda_auto_parser.c:331    mono: mono_out=0x0
  ALSA sound/pci/hda/hda_auto_parser.c:334    dig-out=0x12/0x0
  ALSA sound/pci/hda/hda_auto_parser.c:335    inputs:
  ALSA sound/pci/hda/hda_auto_parser.c:339  Mic=0x11ALSA sound/pci/hda/hda_auto_parser.c:339  Line=0x10
  ALSA sound/pci/hda/hda_auto_parser.c:341
  ALSA sound/pci/hda/hda_auto_parser.c:343    dig-in=0x13

Better to put one item at each line.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Now that the auto model is the default, these quirks are redundant
and can be removed.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This computer is confirmed working with model=auto on kernel 3.2.
Also, parsing fails with hda-emu with the current model.

Cc: stable@kernel.org (3.2+)
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

As with the ThinkPad Models X230 Tablet and T530 the X230 needs a qurik to
correctly set up the pins for the dock port.
Signed-off-by: Felix Kaechele <felix@fetzig.org>
Cc: <stable@vger.kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The commit c4bfe94a causes a regression on some codecs at probing.
Since this was just a workaround to shut up a kernel warning, it'd be
better to revert and fix properly.  So we ended up with re-adding the
cleanup callback.
Tested-and-reported-by: Matt Horan <matt@matthoran.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add a model/fixup string "lenovo-dock", for Thinkpad T430s, to allow
sound in docking station.

Tested on Lenovo T430s with ThinkPad Mini Dock Plus Series 3

Cc: stable@kernel.org
Signed-off-by: Philipp A. Mohrenweiser <phiamo@googlemail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When period=1, the driver tries to allocate a bit bigger buffer than
requested by the user due to the irq latency tolerance.  This may lead
to accesses over the actually allocated pages.

This patch adds a check of the page index and assigns the silent page
when it's over the given buffer size.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When the first page allocation failed for sgbuf, it leaks the records
that have been formerly allocated.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Additional updates for 3.6

A few updates for issues discovered during the merge window, the main
one being the fix for the issues with defaulting to use of regmap
without properly checking if there was I/O in place already.

Check if the chip has provided a write operation (which is mandatory for
I/O) rather than looking for control data as some of the MFDs use a global
for this. Also skip the attempt if there's no regmap available by device
in case things get confused by the attempt to default.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

Lenovo Thinkpad T530 with ALC269VC codec has a dock port but BIOS
doesn't set up the pins properly.  Enable the pins as well as on
Thinkpad X230 Tablet.
Reported-and-tested-by: Mario <anyc@hadiko.de>
Cc: <stable@vger.kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

uac_clock_source_is_valid() uses the control selector value to access
the bmControls bitmap of the clock source unit. This is wrong, as
control selector values start from 1, while the bitmap uses all
available bits.

In other words, "Clock Validity Control" is stored in D3..2, not D5..4
of the clock selector unit's bmControls.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Andreas Koch <andreas@akdesigninc.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Required for reliable power up from cold.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Since commit 38cbf959
("ASoC: core: Try to use regmap if the driver doesn't set up any I/O")
any ASoC codec which doesn't set codec::control_data is assumed
to use regmap.  That doesn't work with AC97 so this workaround
sets the codec::control_data member to a random value to restore
proper behaviour.

Tested with WM9712.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

LINE_IN also needs VAG_POWER on or we may hear noise when directly
route LINE_IN to Headphone Mux.
Tested on imx28evk.
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

If codec->control_data is not populated SoC Core assumes we want to
use regmap, which fails catastrophically, as we don't have one:

Unable to handle kernel NULL pointer dereference at virtual address 00000080
pgd = c0004000
[00000080] *pgd=00000000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1    Not tainted  (3.5.0-rc6-00884-g0b2419e-dirty #130)
PC is at regmap_read+0x10/0x5c
LR is at hw_read+0x80/0x90
pc : [<c01a91b8>]    lr : [<c0216804>]    psr: 60000013
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

The IDT codecs initializes the GPIO setup for mute LEDs via
snd_hda_sync_vmaster_hook().  This works in most cases except for the
very first call, which is called before PCM and control creations.
Thus before Master switch is set manually via alsactl, the mute LED
may show the wrong state, depending on the polarity.

Now it's fixed by calling the LED-status update function manually when
no vmaster is set yet.

Cc: <stable@vger.kernel.org> [v3.4+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

The commit a3e19973 made the LED working again on HP Mini 210 but
with a wrong polarity.  This patch fixes the polarity for this
machine, and also introduce a new model string "hp-inv-led".

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=772923

Cc: <stable@vger.kernel.org> [v3.3+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This will fix the following oops:

[    6.169981] genirq: Flags mismatch irq 5. 00000000 (ES1688) vs. 00000000 (ES1688)
[    6.170851] Pid: 1, comm: swapper Not tainted 3.5.0-00004-gceee0e95 #14
[    6.170851] Call Trace:
[    6.170851]  [<c1062237>] ? __setup_irq+0x3c7/0x420
[    6.170851]  [<c1062486>] ? request_threaded_irq+0x76/0x140
[    6.170851]  [<c1290220>] ? snd_es1688_ioctl+0x10/0x10
[    6.170851]  [<c10624c2>] ? request_threaded_irq+0xb2/0x140
[    6.170851]  [<c1291196>] ? snd_es1688_create+0x96/0x330
[    6.170851]  [<c138365d>] ? snd_gusextreme_probe+0x18d/0x5a2
[    6.170851]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.170851]  [<c10db22f>] ? sysfs_create_link+0xf/0x20
[    6.170851]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.170851]  [<c11d1502>] ? isa_bus_probe+0x12/0x20
[    6.170851]  [<c11c9b95>] ? driver_probe_device+0x55/0x1c0
[    6.170851]  [<c13ae04f>] ? _raw_spin_unlock+0xf/0x30
[    6.170851]  [<c13705ea>] ? klist_next+0x6a/0xe0
[    6.170851]  [<c11d15c1>] ? isa_bus_match+0x21/0x40
[    6.170851]  [<c11c8a24>] ? bus_for_each_drv+0x34/0x70
[    6.170851]  [<c11c9e4b>] ? device_attach+0x7b/0x90
[    6.170851]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.170851]  [<c11c8bff>] ? bus_probe_device+0x5f/0x80
[    6.170851]  [<c11c7493>] ? device_add+0x573/0x620
[    6.170851]  [<c1042820>] ? complete_all+0x40/0x60
[    6.170851]  [<c13ae08a>] ? _raw_spin_unlock_irqrestore+0x1a/0x30
[    6.170851]  [<c11d16c6>] ? isa_register_driver+0xb6/0x150
[    6.170851]  [<c15c9002>] ? alsa_card_gusmax_init+0xf/0xf
[    6.170851]  [<c15a99bc>] ? do_one_initcall+0x7f/0x12b
[    6.170851]  [<c15a9b7a>] ? kernel_init+0x112/0x1a9
[    6.170851]  [<c15a9423>] ? do_early_param+0x77/0x77
[    6.170851]  [<c15a9a68>] ? do_one_initcall+0x12b/0x12b
[    6.170851]  [<c13aefbe>] ? kernel_thread_helper+0x6/0xd
[    6.190170] es1688: can't grab IRQ 5
[    6.190613] genirq: Flags mismatch irq 5. 00000000 (ES1688) vs. 00000000 (ES1688)
[    6.191566] Pid: 1, comm: swapper Not tainted 3.5.0-00004-gceee0e95 #14
[    6.192394] Call Trace:
[    6.192685]  [<c1062237>] ? __setup_irq+0x3c7/0x420
[    6.193342]  [<c1062486>] ? request_threaded_irq+0x76/0x140
[    6.194081]  [<c1290220>] ? snd_es1688_ioctl+0x10/0x10
[    6.194607]  [<c10624c2>] ? request_threaded_irq+0xb2/0x140
[    6.194607]  [<c1291196>] ? snd_es1688_create+0x96/0x330
[    6.194607]  [<c138365d>] ? snd_gusextreme_probe+0x18d/0x5a2
[    6.194607]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.194607]  [<c10db22f>] ? sysfs_create_link+0xf/0x20
[    6.194607]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.194607]  [<c11d1502>] ? isa_bus_probe+0x12/0x20
[    6.194607]  [<c11c9b95>] ? driver_probe_device+0x55/0x1c0
[    6.194607]  [<c13ae04f>] ? _raw_spin_unlock+0xf/0x30
[    6.194607]  [<c13705ea>] ? klist_next+0x6a/0xe0
[    6.194607]  [<c11d15c1>] ? isa_bus_match+0x21/0x40
[    6.194607]  [<c11c8a24>] ? bus_for_each_drv+0x34/0x70
[    6.194607]  [<c11c9e4b>] ? device_attach+0x7b/0x90
[    6.194607]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.194607]  [<c11c8bff>] ? bus_probe_device+0x5f/0x80
[    6.194607]  [<c11c7493>] ? device_add+0x573/0x620
[    6.194607]  [<c1042820>] ? complete_all+0x40/0x60
[    6.194607]  [<c13ae08a>] ? _raw_spin_unlock_irqrestore+0x1a/0x30
[    6.194607]  [<c11d16c6>] ? isa_register_driver+0xb6/0x150
[    6.194607]  [<c15c9002>] ? alsa_card_gusmax_init+0xf/0xf
[    6.194607]  [<c15a99bc>] ? do_one_initcall+0x7f/0x12b
[    6.194607]  [<c15a9b7a>] ? kernel_init+0x112/0x1a9
[    6.194607]  [<c15a9423>] ? do_early_param+0x77/0x77
[    6.194607]  [<c15a9a68>] ? do_one_initcall+0x12b/0x12b
[    6.194607]  [<c13aefbe>] ? kernel_thread_helper+0x6/0xd
[    6.210779] es1688: can't grab IRQ 5
[    6.211305] gusextreme: probe of gusextreme.0 failed with error -16
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

On recent kernels, Realtek codec parser tries to optimize the routing
aggressively and take the headphone output as primary at first.  This
caused a regression on VAIO Z with ALC889, the silent output from the
speaker.

The problem seems that the speaker pin must be connected to the first
DAC (0x02) on this machine by some reason although the codec itself
advertises the flexible routing with any DACs.

This patch adds a fix-up for choosing the speaker pin as the primary
so that the right DAC is assigned on this device.
Reported-and-tested-by: Adam Williamson <awilliam@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recent fix to converter detaching timing in patch_hdmi.c
leads to a kernel WARNING due to a sanity check when the debug
option is set.  Add a workaround by setting a dummy hinfo->nid.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch add missing modules aliases to get sound working on omap devices.

Tested on Beagleboard xM rev. B.

This patch is against 3.5-rc6 vanilla.
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Signed-off-by: Mans Rullgard <mans.rullgard@linaro.org>

From 18b1ba8becc3dd256bdaad2d825f46b551debda3 Mon Sep 17 00:00:00 2001
From: Guillaume GARDET <guillaume.gardet@oliseo.fr>
Date: Tue, 10 Jul 2012 13:47:16 +0200
Subject: [PATCH] Add missing modules aliases to fix audio on omap devices
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

of_get_named_gpio() was changed to return -EPROBE_DEFER in case of
gpios not probed yet. This patch adjusts tegra_alc5632 to this.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

of_get_named_gpio() was changed to return -EPROBE_DEFER in case of
gpios not probed yet. This patch adjusts tegra_wm8903 to this.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

If codec->control_data is not provided, the following crash happens:

Unable to handle kernel NULL pointer dereference at virtual address 00000078
pgd = 80004000
[00000078] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0    Tainted: G        W     (3.5.0-next-20120725+ #1263)
PC is at regmap_read+0x18/0x64
LR is at hw_read+0x50/0x98
pc : [<802bcd90>]    lr : [<803cad18>]    psr: 60000013
...
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

The generic HDMI code detaches the converter from the stream when
unused, but it must be done rather in the close callback instead of
the cleanup callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Thought to be another merge error, board-mop500-msp.h has never existed
in the upstream kernel, only msp.h. This patch changes the include files
to match the existing file name.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

BIOS on HP Mini 210 doesn't provide the proper "HP_Mute_LED" DMI
string, thus the driver doesn't initialize the GPIO, too.  In the
earlier kernel, the driver falls back to GPIO1, but since 3.3 we've
stopped this due to other wrongly advertised machines.

For fixing this particular case, add a new model type to specify the
default polarity explicitly so that the fallback to GPIO1 is handled.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=772923

Cc: <stable@vger.kernel.org> [v3.3+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The irq field of struct snd_mpu401 is supposed to be initialized to -1.
Since it's set to zero as of now, a probing error before the irq
installation results in a kernel warning "Trying to free already-free
IRQ 0".

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44821
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

We've got a bug report about the silent output from the headphone on a
mobo with VT2021, and spotted out that this was because of the wrong
D3 state on the DAC for the headphone output.  The bug is triggered by
the incomplete check for this DAC in set_widgets_power_state_vt1718S().
It checks only the connectivity of the primary output (0x27) but
doesn't consider the path from the headphone pin (0x28).

Now this patch fixes the problem by checking both pins for DAC 0x0b.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Ensures that we don't interact badly with the power management framework,
especially in the cases where we're doing deferred work or we're using a
direct GPIO for these signals.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

There's a driver bug that sgtl5000 dapm widget kcontrols do not work.
e.g. can not select capture mux with amixer tool(no error info prompted).

The root cause is that we still call snd_soc_dapm_new_widgets in
codec driver probe function afer converting to table based widgets.
This will cause the card dapm widgets are instantiated before the
dapm_routes are registered.
Then, no available dapm widget pathes can be found during instantiation
which finally will cause soc_dapm_mux_update_power to fail(can not find
correct path with kcontrol) in snd_soc_dapm_put_enum_double function.

Here we remove the unneeded snd_soc_dapm_new_widgets in codec probe
and let the soc core to handle the register sequence properly.
Then we can fix above issue.
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Set an initial clock rate for the saif internal logic to work
properly. This is important when working in EXTMASTER mode that
uses the other saif's BITCLK&LRCLK but it still needs a basic
clock which should be fast enough for the internal logic.
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Currently we directly call a clock_enable in trigger function without
a clk_prepare as pair first.
This will cause system hang immediately when run capture because
the clock was not prepared(playback does not hang because the clock was
prepared already by get_mclk before), a warning message in clock framework
may cause a deadlock to reclaim clock lock (see: pl011_console_write).

Here we prepare clock first in hw_param, then enable it in trigger
function to guarantee the balance.
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>