Wrong pointer is being passed for raw data sanity checking, when parsing
sample event.

This ends up with invalid event and perf record being stuck in
__perf_session__process_events function during processing build IDs
(process_buildids function).

Following command hangs up in my setup:
	./perf record -e raw_syscalls:sys_enter ls

The fix is to use proper pointer to the raw data instead of the 'u'
union.
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1317308709-9474-2-git-send-email-jolsa@redhat.comSigned-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Problem introduced in 936be503, that missed one perf_event__parse_sample
user, the python binding.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ja4phms9618ggi657plyuch2@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

GCC often introduces new warnings with lots of false positives -
breaking -Werror builds. WERROR=0 allows one to build perf without much
fuss - while still encouraging people to send patches to avoid the fuss
of having to type WERROR=0.

Bisecting back to commits that produce a (mostly harmless) warning on
some compilers is more difficult. With WERROR=0 one could bisect without
worrying about harmless warnings.

Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/eac06c7cc4920e5d4830417d466161fb26c7359c.1315514559.git.dvhart@linux.intel.comSigned-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The 'perf top' tool came from the kernel where we had each DSO (vmlinux,
modules) loaded just once at a time.

But userspace may have DSOs loaded in multiple addresses (shared
libraries), requiring that we use the just resolved map instead of the
first one found.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ag53wz0yllpgers0n2w7hchp@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Buildid can vary in size. According to the man page of ld, buildid can
be 160 bits (sha1) or 128 bits (md5, uuid). Perf assumes buildid size of
20 bytes (160 bits) regardless. When dealing with md5 buildids, it would
thus read more than needed and that would cause mismatches and samples
without symbols.

This patch fixes this by taking into account the actual buildid size as
encoded int he section header. The leftover bytes are also cleared.

This second version fixes a minor issue with the memset() base position.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
Link: http://lkml.kernel.org/r/4cc1af3c.8ee7d80a.5a28.ffff868e@mx.google.comSigned-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Currently, analyzing PPC data files on x86 the cpu field is always 0 and
the tid and pid are backwards. For example, analyzing a PPC file on PPC
the pid/tid fields show:

        rsyslogd  1210/1212

and analyzing the same PPC file using an x86 perf binary shows:

        rsyslogd  1212/1210

The problem is that the swap_op method for samples is
perf_event__all64_swap which assumes all elements in the sample_data
struct are u64s. cpu, tid and pid are u32s and need to be handled
individually. Given that the swap is done before the sample is parsed,
the simplest solution is to undo the 64-bit swap of those elements when
the sample is parsed and do the proper swap.

The RAW data field is generic and perf cannot have programmatic knowledge
of how to treat that data. Instead a warning is given to the user.

Thanks to Anton Blanchard for providing a data file for a mult-CPU
PPC system so I could verify the fix for the CPU fields.

v3 -> v4:
- fixed use of WARN_ONCE

v2 -> v3:
- used WARN_ONCE for message regarding raw data
- removed struct wrapper around union
- fixed whitespace issues

v1 -> v2:
- added a union for undoing the byte-swap on u64 and redoing swap on
  u32's to address compiler errors (see git commit 65014ab3)

Cc: Anton Blanchard <anton@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1315321946-16993-1-git-send-email-dsahern@gmail.comSigned-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

I took a profile that suggested 60% of total CPU time was in the
hypervisor:

...
    60.20%  [H] 0x33d43c
     4.43%  [k] ._spin_lock_irqsave
     1.07%  [k] ._spin_lock

Using perf stat to get the user/kernel/hypervisor breakdown contradicted
this.

The problem is we merge all unresolved samples into the one unknown
bucket. If add a comparison by sample type to sort__sym_cmp we get the
real picture:

...
    57.11%  [.] 0x80fbf63c
     4.43%  [k] ._spin_lock_irqsave
     1.07%  [k] ._spin_lock
     0.65%  [H] 0x33d43c

So it was almost all userspace, not hypervisor as the initial profile
suggested.

I found another issue while adding this. Symbol sorting sometimes shows
multiple entries for the unknown bucket:

...
    16.65%  [.] 0x6cd3a8
     7.25%  [.] 0x422460
     5.37%  [.] yylex
     4.79%  [.] malloc
     4.78%  [.] _int_malloc
     4.03%  [.] _int_free
     3.95%  [.] hash_source_code_string
     2.82%  [.] 0x532908
     2.64%  [.] 0x36b538
     0.94%  [H] 0x8000000000e132a4
     0.82%  [H] 0x800000000000e8b0

This happens because we aren't consistent with our sorting. On
one hand we check to see if both symbols match and for two unresolved
samples sym is NULL so we match:

        if (left->ms.sym == right->ms.sym)
                return 0;

On the other hand we use sample IP for unresolved samples when
comparing against a symbol:

       ip_l = left->ms.sym ? left->ms.sym->start : left->ip;
       ip_r = right->ms.sym ? right->ms.sym->start : right->ip;

This means unresolved samples end up spread across the rbtree and we
can't merge them all.

If we use cmp_null all unresolved samples will end up in the one bucket
and the output makes more sense:

...
    39.12%  [.] 0x36b538
     5.37%  [.] yylex
     4.79%  [.] malloc
     4.78%  [.] _int_malloc
     4.03%  [.] _int_free
     3.95%  [.] hash_source_code_string
     2.26%  [H] 0x800000000000e8b0
Acked-by: Eric B Munson <emunson@mgebm.net>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Link: http://lkml.kernel.org/r/20110831115145.4f598ab2@krytenSigned-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf_event__synthesize_mmap_events does not create anonymous mmap events
even though the kernel does. As a result an already running application
with dynamically created code will not get profiled - all samples end up
in the unknown bucket.

This patch skips any entries with '[' in the name to avoid adding events
for special regions (eg the vsyscall page). All other executable mmaps
are assumed to be anonymous and an event is synthesized.
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Link: http://lkml.kernel.org/r/20110830091506.60b51fe8@krytenSigned-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf-record currently creates events enabled. When doing a system wide
collection (-a arg) this causes data collection for perf's
initialization activities -- eg., perf_event__synthesize_threads().

For some events (e.g., context switch S/W event or tracepoints like
syscalls) perf's initialization causes a lot of events to be captured
frequently generating "Check IO/CPU overload!" warnings on larger
systems (e.g., 2 socket, quad core, hyperthreading).

perf's initialization phase can be skipped by creating events
disabled and then enabling them once the initialization is done.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1314289075-14706-1-git-send-email-dsahern@gmail.comSigned-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Try and pick the best symbol based on a few heuristics:

-  Prefer a non weak symbol over a weak one
-  Prefer a global symbol over a non global one
-  Prefer a symbol with less underscores (idea taken from kallsyms.c)
-  If all else fails, choose the symbol with the longest name

Cc: Eric B Munson <emunson@mgebm.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110824065243.161953371@samba.orgSigned-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

kallsyms__parse capitalises the symbol type, so every symbol is marked
global. Remove this and fix symbol_type__is_a to handle both local and
global symbols.

Cc: Eric B Munson <emunson@mgebm.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110824065243.077125989@samba.orgSigned-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

kallsyms__parse assumes that /proc/kallsyms is sorted and sets the end
of the previous symbol to the start of the current one.

Unfortunately module symbols are not sorted, eg:

ffffffffa0081f30 t e1000_clean_rx_irq   [e1000e]
ffffffffa00817a0 t e1000_alloc_rx_buffers       [e1000e]

Some symbols end up with a negative length and others have a length
larger than they should. This results in confusing perf output.

We already have a function to fixup the end of zero length symbols so
use that instead.

Cc: Eric B Munson <emunson@mgebm.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110824065242.969681349@samba.orgSigned-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

64bit PowerPC debuginfo files have an empty function descriptor section.
I hit a SEGV when perf tried to use this section for symbol resolution.

To fix this we need to check the section is valid and we can do this by
checking for type SHT_PROGBITS.

Cc: <stable@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Eric B Munson <emunson@mgebm.net>
Link: http://lkml.kernel.org/r/20110824065242.895239970@samba.orgSigned-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Fix to call convert_variable() if previous call does not fail.

To call convert_variable, it ensures "ret" is 0. However, since
"ret" has the return value of synthesize_perf_probe_arg() which
always returns positive value if it succeeded, perf probe doesn't
call convert_variable(). This will cause a SEGV when we add an
event with arguments.

This has to be fixed as it ensures "ret" is greater than 0
(or not negative).

This regression has been introduced by my previous patch, f182e3e1.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110820053922.3286.65805.stgit@fedora15Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

xz_dec_run() could incorrectly return XZ_BUF_ERROR if all of the
following was true:

 - The caller knows how many bytes of output to expect and only provides
   that much output space.

 - When the last output bytes are decoded, the caller-provided input
   buffer ends right before the LZMA2 end of payload marker.  So LZMA2
   won't provide more output anymore, but it won't know it yet and thus
   won't return XZ_STREAM_END yet.

 - A BCJ filter is in use and it hasn't left any unfiltered bytes in the
   temp buffer.  This can happen with any BCJ filter, but in practice
   it's more likely with filters other than the x86 BCJ.

This fixes <https://bugzilla.redhat.com/show_bug.cgi?id=735408> where
Squashfs thinks that a valid file system is corrupt.

This also fixes a similar bug in single-call mode where the uncompressed
size of a block using BCJ + LZMA2 was 0 bytes and caller provided no
output space.  Many empty .xz files don't contain any blocks and thus
don't trigger this bug.

This also tweaks a closely related detail: xz_dec_bcj_run() could call
xz_dec_lzma2_run() to decode into temp buffer when it was known to be
useless.  This was harmless although it wasted a minuscule number of CPU
cycles.
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://github.com/davem330/net: (27 commits)
  xfrm: Perform a replay check after return from async codepaths
  fib:fix BUG_ON in fib_nl_newrule when add new fib rule
  ixgbe: fix possible null buffer error
  tg3: fix VLAN tagging regression
  net: pxa168: Fix build errors by including interrupt.h
  netconsole: switch init_netconsole() to late_initcall
  gianfar: Fix overflow check and return value for gfar_get_cls_all()
  ppp_generic: fix multilink fragment MTU calculation (again)
  GRETH: avoid overwrite IP-stack's IP-frags checksum
  GRETH: RX/TX bytes were never increased
  ipv6: fix a possible double free
  b43: Fix beacon problem in ad-hoc mode
  Bluetooth: add support for 2011 mac mini
  Bluetooth: Add MacBookAir4,1 support
  Bluetooth: Fixed BT ST Channel reg order
  r8169: do not enable the TBI for anything but the original 8169.
  r8169: remove erroneous processing of always set bit.
  r8169: fix WOL setting for 8105 and 8111evl
  r8169: add MODULE_FIRMWARE for the firmware of 8111evl
  r8169: fix the reset setting for 8111evl
  ...

* 'for-linus' of git://git.kernel.dk/linux-block:
  floppy: use del_timer_sync() in init cleanup
  blk-cgroup: be able to remove the record of unplugged device
  block: Don't check QUEUE_FLAG_SAME_COMP in __blk_complete_request
  mm: Add comment explaining task state setting in bdi_forker_thread()
  mm: Cleanup clearing of BDI_pending bit in bdi_forker_thread()
  block: simplify force plug flush code a little bit
  block: change force plug flush call order
  block: Fix queue_flag update when rq_affinity goes from 2 to 1
  block: separate priority boosting from REQ_META
  block: remove READ_META and WRITE_META
  xen-blkback: fixed indentation and comments
  xen-blkback: Don't disconnect backend until state switched to XenbusStateClosed.

When a malformed loglevel value (for example "${abc}") is passed on the
kernel cmdline, the loglevel itself is being set to 0.

That then suppresses all following messages, including all the errors
and crashes caused by other malformed cmdline options.  This could make
debugging process quite tricky.

This patch leaves the previous value of loglevel if the new value is
incorrect and reports an error code in this case.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@sysgo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is modeled after the smaps code.

It detects transparent hugepages and then does a single gather_stats()
for the page as a whole.  This has two benifits:
 1. It is more efficient since it does many pages in a single shot.
 2. It does not have to break down the huge page.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gather_pte_stats() does a number of checks on a target page
to see whether it should even be considered for statistics.
This breaks that code out in to a separate function so that
we can use it in the transparent hugepage case in the next
patch.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Christoph Lameter <cl@gentwo.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We need to teach the numa_maps code about transparent huge pages.  The
first step is to teach gather_stats() that the pte it is dealing with
might represent more than one page.

Note that will we use this in a moment for transparent huge pages since
they have use a single pmd_t which _acts_ as a "surrogate" for a bunch
of smaller pte_t's.

I'm a _bit_ unhappy that this interface counts in hugetlbfs page sizes
for hugetlbfs pages and PAGE_SIZE for normal pages.  That means that to
figure out how many _bytes_ "dirty=1" means, you must first know the
hugetlbfs page size.  That's easier said than done especially if you
don't have visibility in to the mount.

But, that's probably a discussion for another day especially since it
would change behavior to fix it.  But, just in case anyone wonders why
this patch only passes a '1' in the hugetlb case...
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When asyncronous crypto algorithms are used, there might be many
packets that passed the xfrm replay check, but the replay advance
function is not called yet for these packets. So the replay check
function would accept a replay of all of these packets. Also the
system might crash if there are more packets in async processing
than the size of the anti replay window, because the replay advance
function would try to update the replay window beyond the bounds.

This pach adds a second replay check after resuming from the async
processing to fix these issues.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

add new fib rule can cause BUG_ON happen
the reproduce shell is
ip rule add pref 38
ip rule add pref 38
ip rule add to 192.168.3.0/24 goto 38
ip rule del pref 38
ip rule add to 192.168.3.0/24 goto 38
ip rule add pref 38

then the BUG_ON will happen
del BUG_ON and use (ctarget == NULL) identify whether this rule is unresolved
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When no floppy is found the module code can be released while a timer
function is pending or about to be executed.

CPU0                                  CPU1
				      floppy_init()
timer_softirq()
   spin_lock_irq(&base->lock);
   detach_timer();
   spin_unlock_irq(&base->lock);
   -> Interrupt
					del_timer();
				        return -ENODEV;
                                      module_cleanup();
   <- EOI
   call_timer_fn();
   OOPS

Use del_timer_sync() to prevent this.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The bug is we're not able to remove the device from blkio cgroup's
per-device control files if it gets unplugged.

To reproduce the bug:

  # mount -t cgroup -o blkio xxx /cgroup
  # cd /cgroup
  # echo "8:0 1000" > blkio.throttle.read_bps_device
  # unplug the device
  # cat blkio.throttle.read_bps_device
  8:0	1000
  # echo "8:0 0" > blkio.throttle.read_bps_device
  -bash: echo: write error: No such device

After patching, the device removal will succeed.

Thanks for the comments of Paul, Zefan, and Vivek.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <paul@paulmenage.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It seems that at least one PPC machine would occasionally give a (valid) 0 as
the return value from dma_map, this caused the ixgbe code to not work
correctly.  A fix is pending in the PPC tree to not return 0 from dma map, but
we can also fix the driver to make sure we don't mess up in other arches as
well.

This patch is applicable to all current stable kernels.

Ref: https://bugzilla.redhat.com/show_bug.cgi?id=683611Reported-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
CC: stable@kernel.org
Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 92cd3a17
    tg3: Simplify tx bd assignments

broke VLAN tagging on outbound packets.
It ifdef'ed BCM_KERNEL_SUPPORTS_8021Q, but this
is not set anywhere. So vlan never gets set, and
all packets are sent with vlan=0.

v2: We can just remove the test. vlan_tx_tag_present
is valid regardless of whether the 802.1q module
is built.

Tested on BCM5721 rev 11.
Signed-off-by: Kasper Pedersen <kernel@kasperkp.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'fixes' of git://git.linaro.org/people/arnd/arm-soc:
  mach-integrator: fix VGA base regression
  arm/dt: Tegra: Update SDHCI nodes to match bindings
  ARM: EXYNOS4: fix incorrect pad configuration for keypad row lines
  ARM: SAMSUNG: fix to prevent declaring duplicated
  ARM: SAMSUNG: fix watchdog reset issue with clk_get()
  ARM: S3C64XX: Remove un-used code backlight code on SMDK6410
  ARM: EXYNOS4: restart clocksource while system resumes
  ARM: EXYNOS4: Fix routing timer interrupt to offline CPU
  ARM: EXYNOS4: Fix return type of local_timer_setup()
  ARM: EXYNOS4: Fix wrong pll type for vpll
  ARM: Dove: fix second SPI initialization call

* 'for-linus' of git://github.com/chrismason/linux:
  Btrfs: reserve sufficient space for ioctl clone

After commit c5f5c4db ("staging: zcache: fix crash on high memory
swap") cleancache crashes on the first successful get.  This was caused
by a remaining virt_to_page() call in zcache_pampd_get_data_and_free()
that only gets run in the cleancache path.

The patch converts the virt_to_page() to struct page casting like was
done for other instances in c5f5c4db.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The changes introduced in commit
cc22b4c1
"ARM: set vga memory base at run-time"

Makes the Integrator/AP freeze completely. I appears that
this is due to the VGA base address being assigned at PCI
init time, while this base is needed earlier than that.
Moving the initialization of the base address to the
.map_io function solves this problem.

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The bindings were recently updated to have separate properties for each
type of GPIO. Update the Device Tree source to match that.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Commit a6b7a407 removed
linux/interrupt.h from netdevice.h. This fixes below build failure

drivers/net/pxa168_eth.c: In function 'pxa168_eth_collect_events':
drivers/net/pxa168_eth.c:866: error: 'IRQ_NONE' undeclared (first use in this function)
drivers/net/pxa168_eth.c:866: error: (Each undeclared identifier is reported only once
drivers/net/pxa168_eth.c:866: error: for each function it appears in.)
drivers/net/pxa168_eth.c: At top level:
drivers/net/pxa168_eth.c:913: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'pxa168_eth_int_handler'
drivers/net/pxa168_eth.c: In function 'pxa168_eth_open':
drivers/net/pxa168_eth.c:1133: error: implicit declaration of function 'request_irq'
drivers/net/pxa168_eth.c:1133: error: 'pxa168_eth_int_handler' undeclared (first use in this function)
drivers/net/pxa168_eth.c:1134: error: 'IRQF_DISABLED' undeclared (first use in this function)
drivers/net/pxa168_eth.c:1160: error: implicit declaration of function 'free_irq'
Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 88491d81(drivers/net: Kconfig & Makefile cleanup) causes a
regression that netconsole does not work if netconsole and network
device driver are build into kernel, because netconsole is linked
before network device driver.

Andrew Morton suggested to fix this with initcall ordering.
Fixes it by switching init_netconsole() to late_initcall.
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function may currently fill one entry beyond the end of the
array it is given.  It also doesn't return an error code in case
it does detect overflow.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using MLPPP, the maximum size of a fragment is incorrectly
calculated with an offset of -2.
This patch reverses the changes in the patch found here:
http://marc.info/?l=linux-netdev&m=123541324010539&w=2

The value of hdrlen includes the size of both the 2-byte PPP protocol
field and the 2- or 4-byte multilink header (2+4=6 for long sequence
numbers, 2+2=4 for short sequence numbers). Section 2 of RFC1661 says
that the MRU that is negotiated (i.e., the MTU of the sending system)
includes only the PPP payload but not the protocol field, thus the
correct MTU should be the link's MTU minus the multilink header (mtu -
(hdrlen-2)).

The incorrect calculation causes Linux to fragment packets to a size two
bytes smaller than the allowed MTU. While not technically illegal, this
behaviour confounds MRU-tuning to avoid PPP-layer fragmentation.
Signed-off-by: Henry Wong <henry@stuffedcow.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The GRETH GBIT core does not do checksum offloading for IP
segmentation. This patch adds a check in the xmit function to
determine if the stack has calculated the checksum for us.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When calling snmp6_alloc_dev fails, the snmp6 relevant memory
are freed by snmp6_alloc_dev. Calling in6_dev_finish_destroy
will free these memory twice.

Double free will lead that undefined behavior occurs.
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>