There are some definitions in dsa_priv.h which are only used from
slave.c. So move them to slave.c.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The previous change moved the code into the larger file (dsa2.c) to
minimize the delta. Rename that now to dsa.c, and create dsa.h, where
all related definitions from dsa_priv.h go.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There is no longer a meaningful distinction between what goes into
dsa2.c and what goes into dsa.c. Merge the 2 into a single file.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Reduce bloat in dsa_priv.h by moving the cross-chip notifier data
structures to switch.h.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There isn't an intuitive place for these 2 cross-chip notifier functions
according to the function-to-file classification based on names
(dsa_switch_*() goes to switch.c), but I consider these to be part of
the cross-chip notifier handling, therefore part of switch.c. Move them
there to reduce bloat in dsa2.c (the place where all code with no better
place to go goes).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Reduce code bloat in dsa_priv.h by moving the prototypes exported by
switch.h into their own header file.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

It would be nice if tagging protocol drivers could include just the
header they need, since they are (mostly) data path and isolated from
most of the other DSA core code does.

Create a tag.c and a tag.h file which are meant to support tagging
protocol drivers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Minimize the use of the bloated dsa_priv.h by moving the prototypes
exported by slave.c to their own header file.

This is just approximate to get the code structure right. There are some
interdependencies with static inline code left in dsa_priv.h, so leave
slave.h included from there for now.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Minimize the use of the bloated dsa_priv.h by moving the prototypes
exported by master.c to their own header file.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Minimize the use of the bloated dsa_priv.h by moving the prototypes
exported by port.c to their own header file.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The code that needed further refactoring into dedicated functions in
dsa2.c was left aside. Move it now to devlink.c, and make dsa2.c stop
including net/devlink.h.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Simplify dsa_switch_teardown() to remove the NULL checking for
ds->devlink.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dsa.c and dsa2.c are bloated with too much off-topic code. Identify all
code related to devlink and move it to a new devlink.c file.

Steer clear of the dsa_priv.h dumping ground antipattern and create a
dedicated devlink.h for it, which will be included only by the C files
which need it. Usage of dsa_priv.h will be minimized in later patches.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There is no reason that I can see why the no-op tagging protocol should
be registered manually, so make it a module and make all drivers which
have any sort of reference to DSA_TAG_PROTO_NONE select it.

Note that I don't know if ksz_get_tag_protocol() really needs this,
or if it's just the logic which is poorly written. All switches seem to
have their own tagging protocol, and DSA_TAG_PROTO_NONE is just a
fallback that never gets used.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dsa.o and dsa2.o are linked into the same dsa_core.o, there is no reason
to export this symbol when its only caller is local.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Reporter health_state is set twice to error in devlink_health_report().
Remove second time as it is redundant.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/1668933412-5498-1-git-send-email-moshe@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The cited commit caused the following build break when CONFIG_IPV6 was
disabled

net/ipv4/tcp_input.c: In function ‘tcp_syn_flood_action’:
include/net/sock.h:387:37: error: ‘const struct sock_common’ has no member named ‘skc_v6_rcv_saddr’; did you mean ‘skc_rcv_saddr’?

Fix by using inet6_rcv_saddr() macro which handles this situation
nicely.

Fixes: d9282e48 ("tcp: Add listening address to SYN flood message")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
CC: Matthieu Baerts <matthieu.baerts@tessares.net>
CC: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221122184158.170798-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'i2c/client_device_id_helper-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull in a dependency for an API cleanup:
https://lore.kernel.org/all/20221118224540.619276-1-uwe@kleine-koenig.org/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Colin Foster says:

====================
cleanup ocelot_stats exposure

The ocelot_stats structures became redundant across all users. Replace
this redundancy with a static const struct. After doing this, several
definitions inside include/soc/mscc/ocelot.h no longer needed to be
shared. Patch 2 removes them.

Checkpatch throws an error for a complicated macro not in parentheses. I
understand the reason for OCELOT_COMMON_STATS was to allow expansion, but
interestingly this patch set is essentially reverting the ability for
expansion. I'm keeping the macro in this set, but am open to remove it,
since it doesn't _actually_ provide any immediate benefits anymore.
====================

Link: https://lore.kernel.org/r/20221119231406.3167852-1-colin.foster@in-advantage.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Ocelot uses regmap_bulk_read() operations to efficiently read stats
registers. Currently the implementation relies on the stats layout to be
ordered to be most efficient.

Issue a warning if any future implementations happen to break this pattern.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Since commit 4d1d157f ("net: mscc: ocelot: share the common stat
definitions between all drivers") there is no longer a need to share the
stats structures to the world. Relocate these definitions to inside
ocelot_stats.c instead of a global include header.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Ever since commit 4d1d157f ("net: mscc: ocelot: share the common stat
definitions between all drivers") the stats_layout entry in ocelot and
felix drivers have become redundant. Remove the unnecessary code.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The selftests/net does not have proper cross-compilation support, and
does not properly state libbpf as a dependency. Mimic/copy the BPF
build from selftests/bpf, which has the nice side-effect that libbpf
is built as well.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20221119171841.2014936-1-bjorn@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
	egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the related file to use "grep -E" instead.

  sed -i "s/egrep/grep -E/g" `grep egrep -rwl samples/pktgen`

Here are the steps to install the latest grep:

  wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
  tar xf grep-3.8.tar.gz
  cd grep-3.8 && ./configure && make
  sudo make install
  export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1668826504-32162-1-git-send-email-yangtiezhu@loongson.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

1. If a profile does not support DMAC extraction then avoid installing NPC
flow rules for unicast. Similarly, if LXMB(L2 and L3) extraction is not
supported by the profile then avoid installing broadcast and multicast
rules.
2. Allow MCAM entry insertion for promiscuous mode.
3. For the profiles where DMAC is not extracted in MKEX key default
unicast entry installed by AF is not valid. Hence do not use action
from the AF installed default unicast entry for such cases.
4. Adjacent packet header fields in a packet like IP header source
and destination addresses or UDP/TCP header source port and destination
can be extracted together in MKEX profile. Therefore MKEX profile can be
configured to in two ways:
	a. Total of 4 bytes from start of UDP header(src port
	   + destination port)
	or
	b. Two bytes from start and two bytes from offset 2
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20221118053329.2288486-1-sumang@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Clear the RGMII_LINK bit upon detecting link down to be consistent with
setting the bit upon link up. We also move the clearing of the
out-of-band disable to the runtime initialization rather than for each
link up/down transition.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221118213754.1383364-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Smatch complains that "err" can be uninitialized on these paths.  Also
it's just nicer to "return 0;" instead of "return err;"

Fixes: 3a344f99 ("net: microchip: sparx5: Add support for TC flower ARP dissector")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y3eg9Ml/LmLR3L3C@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I was mistaken how atomic64_try_cmpxchg(&sk_cookie, &res, new)
is working.

I was assuming @res would contain the final sk_cookie value,
regardless of the success of our cmpxchg()

We could do something like:

if (atomic64_try_cmpxchg(&sk_cookie, &res, new)
	res = new;

But we can avoid a conditional and read sk_cookie again.

atomic64_cmpxchg(&sk_cookie, res, new);
res = atomic64_read(&sk_cookie);
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527347 ("Error handling issues")
Fixes: 4ebf802c ("net: __sock_gen_cookie() cleanup")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221118043843.3703186-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Mat Martineau says:

====================
mptcp: More specific netlink command errors

This series makes the error reporting for the MPTCP_PM_CMD_ADD_ADDR netlink
command more specific, since there are multiple reasons the command could
fail.

Note that patch 2 adds a GENL_SET_ERR_MSG_FMT() macro to genetlink.h,
which is outside the MPTCP subsystem.

Patch 1 refactors in-kernel listening socket and endpoint creation to
simplify the second patch.

Patch 2 updates the error values returned by the in-kernel path manager
when it fails to create a local endpoint.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Endpoint creation can fail for a number of reasons; in case of failure
append the error number to the extended ack message, using a newly
introduced generic helper.

Additionally let mptcp_pm_nl_append_new_local_addr() report different
error reasons.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When endpoint creation fails, we need to free the newly allocated
entry and eventually destroy the paired mptcp listener socket.

Consolidate such action in a single point let all the errors path
reach it.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We assume the correct errno is -EADDRINUSE when sk->sk_prot->get_port()
fails, so some ->get_port() functions return just 1 on failure and the
callers return -EADDRINUSE instead.

However, mptcp_get_port() can return -EINVAL.  Let's not ignore the error.

Note the only exception is inet_autobind(), all of whose callers return
-EAGAIN instead.

Fixes: cec37a6e ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Smatch detected the following warning.

    drivers/net/ethernet/renesas/rswitch.c:1717 rswitch_init() warn:
    '%pM' cannot be followed by 'n'

The 'n' should be '\n'.
Reported-by: Dan Carpenter <error27@gmail.com>
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev.vger.kernel.org archive mirror
Steen Hegelund says:

====================
net: Add support for VCAP debugFS in Sparx5

This provides support for getting VCAP instance, VCAP rule and VCAP port
keyset configuration information via the debug file system.

It builds on top of the initial IS2 VCAP support found in these series:

https://lore.kernel.org/all/20221020130904.1215072-1-steen.hegelund@microchip.com/
https://lore.kernel.org/all/20221109114116.3612477-1-steen.hegelund@microchip.com/
https://lore.kernel.org/all/20221111130519.1459549-1-steen.hegelund@microchip.com/

Functionality:
==============

The VCAP API exposes a /sys/kernel/debug/sparx5/vcaps folder containing
the following entries:

- raw_<vcap>_<instance>
    This is a raw dump of the VCAP instance with a line for each available
    VCAP rule.  This information is limited to the VCAP rule address, the
    rule size and the rule keyset name as this requires very little
    information from the VCAP cache.

    This can be used to detect if a valid rule is stored at the correct
    address.

- <vcap>_<instance>
    This dumps the VCAP instance configuration: address ranges, chain id
    ranges, word size of keys and actions etc, and for each VCAP rule the
    details of keys (values and masks) and actions are shown.

    This is useful when discovering if the expected rule is present and in
    which order it will be matched.

- <interface>
    This shows the keyset configuration per lookup and traffic type and the
    set of sticky bits (common for all interfaces). This is cleared when
    shown, so it is possible to sample over a period of time.

    It also shows if this port/lookup is enabled for matching in the VCAP.

    This can be used to find out which keyset the traffic being sent to a
    port, will be matched against, and if such traffic has been seen by one
    of the ports.

Delivery:
=========

This is current plan for delivering the full VCAP feature set of Sparx5:

- TC protocol all support for IS2 VCAP
- Sparx5 IS0 VCAP support
- TC policer and drop action support (depends on the Sparx5 QoS support
  upstreamed separately)
- Sparx5 ES0 VCAP support
- TC flower template support
- TC matchall filter support for mirroring and policing ports
- TC flower filter mirror action support
- Sparx5 ES2 VCAP support

Version History:
================
v2      Removed a 'support' folder (used for integration testing) that had
        been added in patch 6/8 by a mistake.
        Wrapped long lines.

v1      Initial version
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This tests the functionality of the debugFS support:

- finding valid keyset on an address
- raw VCAP output
- full rule VCAP output
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This ensures that the VCAP cache and the lists maintained in the VCAP
instance is protected when accessed by different clients.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This add support for displaying the keys and actions in a rule.
The keys and action display format will be determined by the size and the
type of the key or action. The longer keys will typically be displayed as a
hexadecimal byte array.

The actionset is not decoded in full as the Sparx5 IS2 only has one
supported action, so this will be added later with other VCAP types.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This add support to show all rules in a VCAP instance. The information
shown is:

 - rule id
 - address range
 - size
 - chain id
 - keyset name, subword size, register span
 - actionset name, subword size, register span
 - counter value
 - sticky bit (one bit width counter)
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds support for decoding VCAP rules with a minimum number of
attributes: address, rule size and keyset.

This allows for a quick inspection of a VCAP instance to determine if the
rule are present and in the correct order.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a debugFS root folder for Sparx5 and add a vcap folder underneath with
the VCAP instances and the ports
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>