- 11 Jun, 2020 12 commits
-
-
Paul Greenwalt authored
With an increased number of VFs, it's possible to encounter the following issue during reset. iavf b8d4:00:02.0: Hardware reset detected iavf b8d4:00:02.0: Reset never finished (0) iavf b8d4:00:02.0: Reset task did not complete, VF disabled Increase the reset complete wait count to allow for 128 VFs to complete reset. Signed-off-by:Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Brett Creeley authored
Commit 4ae4916b ("i40e: fix 'Unknown bps' in dmesg for 2.5Gb/5Gb speeds") added the ability for the PF to report 2.5 and 5Gb speeds, however, the iavf driver does not recognize those speeds as the values were not added there. Add the proper enums and values so that iavf can properly deal with those speeds. Fixes: 4ae4916b ("i40e: fix 'Unknown bps' in dmesg for 2.5Gb/5Gb speeds") Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Signed-off-by:
Witold Fijalkowski <witoldx.fijalkowski@intel.com> Signed-off-by:
-
Aleksandr Loktionov authored
adapter->link_speed has type enum virtchnl_link_speed but our comparisons are against enum iavf_aq_link_speed. Though they are, currently, the same values, change the comparison to the matching enum virtchnl_link_speed since that may not always be the case. Signed-off-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by:
Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by:
-
Brett Creeley authored
Link speeds are communicated over virtchnl using an enum virtchnl_link_speed. Currently, the highest link speed is 40Gbps which leaves us unable to reflect some speeds that an ice VF is capable of. This causes link speed to be misreported on the iavf driver. Allow for communicating link speeds using Mbps so that the proper speed can be reported for an ice VF. Moving away from the enum allows us to communicate future speed changes without requiring a new enum to be added. In order to support communicating link speeds over virtchnl in Mbps the following functionality was added: - Added u32 link_speed_mbps in the iavf_adapter structure. - Added the macro ADV_LINK_SUPPORT(_a) to determine if the VF driver supports communicating link speeds in Mbps. - Added the function iavf_get_vpe_link_status() to fill the correct link_status in the event_data union based on the ADV_LINK_SUPPORT(_a) macro. - Added the function iavf_set_adapter_link_speed_from_vpe() to determine whether or not to fill the u32 link_speed_mbps or enum virtchnl_link_speed link_speed field in the iavf_adapter structure based on the ADV_LINK_SUPPORT(_a) macro. - Do not free vf_res in iavf_init_get_resources() as vf_res will be accessed in iavf_get_link_ksettings(); memset to 0 instead. This memory is subsequently freed in iavf_remove(). Fixes: 7c710869 ("ice: Add handlers for VF netdevice operations") Signed-off-by:Sergey Nemov <sergey.nemov@intel.com> Signed-off-by:
-
Tuong Lien authored
When a bearer is enabled, we create a 'tipc_discoverer' object to store the bearer related data along with a timer and a preformatted discovery message buffer for later probing... However, this is only carried after the bearer was set 'up', that left a race condition resulting in kernel panic. It occurs when a discovery message from a peer node is received and processed in bottom half (since the bearer is 'up' already) just before the discoverer object is created but is now accessed in order to update the preformatted buffer (with a new trial address, ...) so leads to the NULL pointer dereference. We solve the problem by simply moving the bearer 'up' setting to later, so make sure everything is ready prior to any message receiving. Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tuong Lien authored
syzbot found the following issue: WARNING: CPU: 0 PID: 6808 at include/linux/thread_info.h:150 check_copy_size include/linux/thread_info.h:150 [inline] WARNING: CPU: 0 PID: 6808 at include/linux/thread_info.h:150 copy_from_iter include/linux/uio.h:144 [inline] WARNING: CPU: 0 PID: 6808 at include/linux/thread_info.h:150 tipc_msg_append+0x49a/0x5e0 net/tipc/msg.c:242 Kernel panic - not syncing: panic_on_warn set ... This happens after commit 5e9eeccc ("tipc: fix NULL pointer dereference in streaming") that tried to build at least one buffer even when the message data length is zero... However, it now exposes another bug that the 'mss' can be zero and the 'cpy' will be negative, thus the above kernel WARNING will appear! The zero value of 'mss' is never expected because it means Nagle is not enabled for the socket (actually the socket type was 'SOCK_SEQPACKET'), so the function 'tipc_msg_append()' must not be called at all. But that was in this particular case since the message data length was zero, and the 'send <= maxnagle' check became true. We resolve the issue by explicitly checking if Nagle is enabled for the socket, i.e. 'maxnagle != 0' before calling the 'tipc_msg_append()'. We also reinforce the function to against such a negative values if any. Reported-by: syzbot+75139a7d2605236b0b7f@syzkaller.appspotmail.com Fixes: c0bceb97 ("tipc: add smart nagle feature") Acked-by:
-
Shannon Nelson authored
We no longer support the mgmt device in the ionic driver, so remove the device id and related code. Fixes: b3f064e9 ("ionic: add support for device id 0x1004") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Xu Wang authored
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
-
Jakub Kicinski authored
A new file snuck into the tree after all existing documentation was converted to RST. Convert sja1105's devlink info and move it where the rest of the drivers are documented. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Acked-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by:
-
David S. Miller authored
Ayush Sawal says: ==================== Fixing issues in dma mapping and driver removal Patch 1: This fixes the kernel panic which occurs due to the accessing of a zero length sg. Patch 2: Avoiding unregistering the algorithm if cra_refcnt is not 1. ==================== Signed-off-by: -
Ayush Sawal authored
This patch puts a check for algorithm unregister, to avoid removal of driver if the algorithm is under use. Signed-off-by:
Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by:
-
Ayush Sawal authored
This patch calculates src and dst sg lengths separately for dma mapping in case of aead operation. This fixes a panic which occurs due to the accessing of a zero length sg. Panic: [ 138.173225] kernel BUG at drivers/iommu/intel-iommu.c:1184! Signed-off-by:
-
- 10 Jun, 2020 7 commits
-
-
Jakub Kicinski authored
We need an empty line before list stats, otherwise first point will be smooshed into the paragraph. Inside tables text must start at the same offset in the cell, otherwise sphinx thinks it's a new indented block. Documentation/networking/dsa/sja1105.rst:108: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/dsa/sja1105.rst:112: WARNING: Definition list ends without a blank line; unexpected unindent. Documentation/networking/dsa/sja1105.rst:245: WARNING: Unexpected indentation. Documentation/networking/dsa/sja1105.rst:246: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/dsa/sja1105.rst:253: WARNING: Unexpected indentation. Documentation/networking/dsa/sja1105.rst:254: WARNING: Block quote ends without a blank line; unexpected unindent. Fixes: a20bc43b ("docs: net: dsa: sja1105: document the best_effort_vlan_filtering option") Signed-off-by:
-
Jakub Kicinski authored
Sphinx appears to get upset at extra spaces at the end of a literal: Documentation/networking/ethtool-netlink.rst:1032: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1034: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1036: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1089: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1091: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1093: WARNING: Inline literal start-string without end-string. Fixes: f2bc8ad3 ("net: ethtool: Allow PHY cable test TDR data to configured") Fixes: a331172b ("net: ethtool: Add attributes for cable test TDR data") Signed-off-by:
-
Corentin Labbe authored
When the PHY is not working, the macb driver crash on a second try to setup it. [ 78.545994] macb e000b000.ethernet eth0: Could not attach PHY (-19) ifconfig: SIOCSIFFLAGS: No such device [ 78.655457] ------------[ cut here ]------------ [ 78.656014] kernel BUG at /linux-next/include/linux/netdevice.h:521! [ 78.656504] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 78.657079] Modules linked in: [ 78.657795] CPU: 0 PID: 122 Comm: ifconfig Not tainted 5.7.0-next-20200609 #1 [ 78.658202] Hardware name: Xilinx Zynq Platform [ 78.659632] PC is at macb_open+0x220/0x294 [ 78.660160] LR is at 0x0 [ 78.660373] pc : [<c0b0a634>] lr : [<00000000>] psr: 60000013 [ 78.660716] sp : c89ffd70 ip : c8a28800 fp : c199bac0 [ 78.661040] r10: 00000000 r9 : c8838540 r8 : c8838568 [ 78.661362] r7 : 00000001 r6 : c8838000 r5 : c883c000 r4 : 00000000 [ 78.661724] r3 : 00000010 r2 : 00000000 r1 : 00000000 r0 : 00000000 [ 78.662187] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 78.662635] Control: 10c5387d Table: 08b64059 DAC: 00000051 [ 78.663035] Process ifconfig (pid: 122, stack limit = 0x(ptrval)) [ 78.663476] Stack: (0xc89ffd70 to 0xc8a00000) [ 78.664121] fd60: 00000000 c89fe000 c8838000 c89fe000 [ 78.664866] fd80: 00000000 c11ff9ac c8838028 00000000 00000000 c0de6f2c 00000001 c1804eec [ 78.665579] fda0: c19b8178 c8838000 00000000 ca760866 c8838000 00000001 00001043 c89fe000 [ 78.666355] fdc0: 00001002 c0de72f4 c89fe000 c0de8dc0 00008914 c89fe000 c199bac0 ca760866 [ 78.667111] fde0: c89ffddc c8838000 00001002 00000000 c8838138 c881010c 00008914 c0de7364 [ 78.667862] fe00: 00000000 c89ffe70 c89fe000 ffffffff c881010c c0e8bd48 00000003 00000000 [ 78.668601] fe20: c8838000 c8810100 39c1118f 00039c11 c89a0960 00001043 00000000 000a26d0 [ 78.669343] fe40: b6f43000 ca760866 c89a0960 00000051 befe6c50 00008914 c8b2a3c0 befe6c50 [ 78.670086] fe60: 00000003 ee610500 00000000 c0e8ef58 30687465 00000000 00000000 00000000 [ 78.670865] fe80: 00001043 00000000 000a26d0 b6f43000 c89a0600 ee40ae7c c8870d00 c0ddabf4 [ 78.671593] fea0: c89ffeec c0ddabf4 c89ffeec c199bac0 00008913 c0ddac48 c89ffeec c89fe000 [ 78.672324] fec0: befe6c50 ca760866 befe6c50 00008914 c89fe000 befe6c50 c8b2a3c0 c0dc00e4 [ 78.673088] fee0: c89a0480 00000201 00000cc0 30687465 00000000 00000000 00000000 00001002 [ 78.673822] ff00: 00000000 000a26d0 b6f43000 ca760866 00008914 c8b2a3c0 000a0ec4 c8b2a3c0 [ 78.674576] ff20: befe6c50 c04b21bc 000d5004 00000817 c89a0480 c0315f94 00000000 00000003 [ 78.675415] ff40: c19a2bc8 c8a3cc00 c89fe000 00000255 00000000 00000000 00000000 000d5000 [ 78.676182] ff60: 000f6000 c180b2a0 00000817 c0315e64 000d5004 c89fffb0 b6ec0c30 ca760866 [ 78.676928] ff80: 00000000 000b609b befe6c50 000a0ec4 00000036 c03002c4 c89fe000 00000036 [ 78.677673] ffa0: 00000000 c03000c0 000b609b befe6c50 00000003 00008914 befe6c50 000b609b [ 78.678415] ffc0: 000b609b befe6c50 000a0ec4 00000036 befe6e0c befe6f1a 000d5150 00000000 [ 78.679154] ffe0: 000d41e4 befe6bf4 00019648 b6e4509c 20000010 00000003 00000000 00000000 [ 78.681059] [<c0b0a634>] (macb_open) from [<c0de6f2c>] (__dev_open+0xd0/0x154) [ 78.681571] [<c0de6f2c>] (__dev_open) from [<c0de72f4>] (__dev_change_flags+0x16c/0x1c4) [ 78.682015] [<c0de72f4>] (__dev_change_flags) from [<c0de7364>] (dev_change_flags+0x18/0x48) [ 78.682493] [<c0de7364>] (dev_change_flags) from [<c0e8bd48>] (devinet_ioctl+0x5e4/0x75c) [ 78.682945] [<c0e8bd48>] (devinet_ioctl) from [<c0e8ef58>] (inet_ioctl+0x1f0/0x3b4) [ 78.683381] [<c0e8ef58>] (inet_ioctl) from [<c0dc00e4>] (sock_ioctl+0x39c/0x664) [ 78.683818] [<c0dc00e4>] (sock_ioctl) from [<c04b21bc>] (ksys_ioctl+0x2d8/0x9c0) [ 78.684343] [<c04b21bc>] (ksys_ioctl) from [<c03000c0>] (ret_fast_syscall+0x0/0x54) [ 78.684789] Exception stack(0xc89fffa8 to 0xc89ffff0) [ 78.685346] ffa0: 000b609b befe6c50 00000003 00008914 befe6c50 000b609b [ 78.686106] ffc0: 000b609b befe6c50 000a0ec4 00000036 befe6e0c befe6f1a 000d5150 00000000 [ 78.686710] ffe0: 000d41e4 befe6bf4 00019648 b6e4509c [ 78.687582] Code: 9a000003 e5983078 e3130001 1affffef (e7f001f2) [ 78.688788] ---[ end trace e3f2f6ab69754eae ]--- This is due to NAPI left enabled if macb_phylink_connect() fail. Fixes: 7897b071 ("net: macb: convert to phylink") Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Paolo Abeni authored
If a listening MPTCP socket has unaccepted sockets at close time, the related msks are freed via mptcp_sock_destruct(), which in turn does not invoke the proto->destroy() method nor the mptcp_token_destroy() function. Due to the above, the child msk socket is not removed from the token container, leading to later UaF. Address the issue explicitly removing the token even in the above error path. Fixes: 79c0949e ("mptcp: Add key generation and token tree") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Paolo Abeni authored
The msk sk_shutdown flag is set by a workqueue, possibly introducing some delay in user-space notification. If the last subflow carries some data with the fin packet, the user space can wake-up before RCV_SHUTDOWN is set. If it executes unblocking recvmsg(), it may return with an error instead of eof. Address the issue explicitly checking for eof in recvmsg(), when no data is found. Fixes: 59832e24 ("mptcp: subflow: check parent mptcp socket on subflow state change") Signed-off-by:
-
David Ahern authored
vxlan driver should be using helpers to access nexthop struct internals. Remove open check if whether nexthop is multipath in favor of the existing nexthop_is_multipath helper. Add a new helper, nexthop_has_v4, to cover the need to check has_v4 in a group. Fixes: 1274e1cc ("vxlan: ecmp support for mac fdb entries") Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
David Ahern authored
fdb nexthops are marked with a flag. For standalone nexthops, a flag was added to the nh_info struct. For groups that flag was added to struct nexthop when it should have been added to the group information. Fix by removing the flag from the nexthop struct and adding a flag to nh_group that mirrors nh_info and is really only a caching of the individual types. Add a helper, nexthop_is_fdb, for use by the vxlan code and fixup the internal code to use the flag from either nh_info or nh_group. v2 - propagate fdb_nh in remove_nh_grp_entry Fixes: 38428d68 ("nexthop: support for fdb ecmp nexthops") Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
- 09 Jun, 2020 13 commits
-
-
Pablo Neira Ayuso authored
Remove function declarations that are not available in the tree anymore. Fixes: 709ffbe1 ("net: remove indirect block netdev event registration") Reported-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
tannerlove authored
getopt_long requires the last element to be filled with zeros. Otherwise, passing an unrecognized option can cause a segfault. Fixes: 16e78122 ("selftests/net: Add a test to validate behavior of rx timestamps") Signed-off-by:
Tanner Love <tannerlove@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Lorenzo Bianconi authored
Disable frames injection in mvneta_xdp_xmit routine during hw re-configuration in order to avoid hardware hangs Fixes: b0a43db9 ("net: mvneta: add XDP_TX support") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Wang Hai authored
There are some memory leaks in dccp_init() and dccp_fini(). In dccp_fini() and the error handling path in dccp_init(), free lhash2 is missing. Add inet_hashinfo2_free_mod() to do it. If inet_hashinfo2_init_mod() failed in dccp_init(), percpu_counter_destroy() should be called to destroy dccp_orphan_count. It need to goto out_free_percpu when inet_hashinfo2_init_mod() failed. Fixes: c92c81df ("net: dccp: fix kernel crash on module load") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Shannon Nelson authored
The netif_running() test looks at __LINK_STATE_START which gets set before ndo_open() is called, there is a window of time between that and when the queues are actually ready to be run. If ionic_check_link_status() notices that the link is up very soon after netif_running() becomes true, it might try to run the queues before they are ready, causing all manner of potential issues. Since the netdev->flags IFF_UP isn't set until after ndo_open() returns, we can wait for that before we allow ionic_check_link_status() to start the queues. On the way back to close, __LINK_STATE_START is cleared before calling ndo_stop(), and IFF_UP is cleared after. Both of these need to be true in order to safely stop the queues from ionic_check_link_status(). Fixes: 49d3b493 ("ionic: disable the queues on link down") Signed-off-by:
-
Valentin Longchamp authored
Since the quiesce/activate rework, __netdev_watchdog_up() is directly called in the ucc_geth driver. Unfortunately, this function is not available for modules and thus ucc_geth cannot be built as a module anymore. Fix it by exporting __netdev_watchdog_up(). Since the commit introducing the regression was backported to stable branches, this one should ideally be as well. Fixes: 79dde73c ("net/ethernet/freescale: rework quiesce/activate for ucc_geth") Signed-off-by:
Valentin Longchamp <valentin@longchamp.me> Signed-off-by:
-
Cong Wang authored
The dynamic key update for addr_list_lock still causes troubles, for example the following race condition still exists: CPU 0: CPU 1: (RCU read lock) (RTNL lock) dev_mc_seq_show() netdev_update_lockdep_key() -> lockdep_unregister_key() -> netif_addr_lock_bh() because lockdep doesn't provide an API to update it atomically. Therefore, we have to move it back to static keys and use subclass for nest locking like before. In commit 1a33e10e ("net: partially revert dynamic lockdep key changes"), I already reverted most parts of commit ab92d68f ("net: core: add generic lockdep keys"). This patch reverts the rest and also part of commit f3b0a18b ("net: remove unnecessary variables and callback"). After this patch, addr_list_lock changes back to using static keys and subclasses to satisfy lockdep. Thanks to dev->lower_level, we do not have to change back to ->ndo_get_lock_subclass(). And hopefully this reduces some syzbot lockdep noises too. Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com Cc: Taehee Yoo <ap420073@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
tannerlove authored
If user passed an interface option longer than 15 characters, then device.ifr_name and hwtstamp.ifr_name became non-null-terminated strings. The compiler warned about this: timestamping.c:353:2: warning: ‘strncpy’ specified bound 16 equals \ destination size [-Wstringop-truncation] 353 | strncpy(device.ifr_name, interface, sizeof(device.ifr_name)); Fixes: cb9eff09 ("net: new user space API for time stamping of incoming and outgoing packets") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc: Fix hang due to missing notification Here's a fix for AF_RXRPC. Occasionally calls hang because there are circumstances in which rxrpc generate a notification when a call is completed - primarily because initial packet transmission failed and the call was killed off and an error returned. But the AFS filesystem driver doesn't check this under all circumstances, expecting failure to be delivered by asynchronous notification. There are two patches: the first moves the problematic bits out-of-line and the second contains the fix. ==================== Signed-off-by: -
Geliang Tang authored
In MPTCPOPT_RM_ADDR option parsing, the pointer "ptr" pointed to the "Subtype" octet, the pointer "ptr+1" pointed to the "Address ID" octet: +-------+-------+---------------+ |Subtype|(resvd)| Address ID | +-------+-------+---------------+ | | ptr ptr+1 We should set mp_opt->rm_id to the value of "ptr+1", not "ptr". This patch will fix this bug. Fixes: 3df523ab ("mptcp: Add ADD_ADDR handling") Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Reviewed-by:
-
Arjun Roy authored
Use vm_insert_pages() for tcp receive zerocopy. Spin lock cycles (as reported by perf) drop from a couple of percentage points to a fraction of a percent. This results in a roughly 6% increase in efficiency, measured roughly as zerocopy receive count divided by CPU utilization. The intention of this patchset is to reduce atomic ops for tcp zerocopy receives, which normally hits the same spinlock multiple times consecutively. [akpm@linux-foundation.org: suppress gcc-7.2.0 warning] Link: http://lkml.kernel.org/r/20200128025958.43490-3-arjunroy.kdev@gmail.comSigned-off-by:
Arjun Roy <arjunroy@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Cc: David Miller <davem@davemloft.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Pooja Trivedi authored
This selftest tests for cases where sendfile's 'count' parameter is provided with a size greater than the intended file size. Motivation: When sendfile is provided with 'count' parameter value that is greater than the size of the file, kTLS example fails to send the file correctly. Last chunk of the file is not sent, and the data integrity is compromised. The reason is that the last chunk has MSG_MORE flag set because of which it gets added to pending records, but is not pushed. Note that if user space were to send SSL_shutdown control message, pending records would get flushed and the issue would not happen. So a shutdown control message following sendfile can mask the issue. Signed-off-by:
Pooja Trivedi <pooja.trivedi@stackpath.com> Signed-off-by:
Mallesham Jatharkonda <mallesham.jatharkonda@oneconvergence.com> Signed-off-by:
Josh Tway <josh.tway@stackpath.com> Reviewed-by:
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2020-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a small update: * fix the deadlock on rfkill/wireless removal that a few people reported * fix an uninitialized variable * update wiki URLs ==================== Signed-off-by:
-
- 08 Jun, 2020 7 commits
-
-
Flavio Suligoi authored
In the files: - net/mac80211/rx.c - net/wireless/Kconfig the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by:
Flavio Suligoi <f.suligoi@asem.it> Link: https://lore.kernel.org/r/20200605154112.16277-10-f.suligoi@asem.itSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Flavio Suligoi authored
The wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by:
-
Flavio Suligoi authored
In the files: - regulatory.rst - mac80211-injection.rst the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: - Fix the build with certain Kconfig combinations for the Chelsio inline TLS device, from Rohit Maheshwar and Vinay Kumar Yadavi. - Fix leak in genetlink, from Cong Lang. - Fix out of bounds packet header accesses in seg6, from Ahmed Abdelsalam. - Two XDP fixes in the ENA driver, from Sameeh Jubran - Use rwsem in device rename instead of a seqcount because this code can sleep, from Ahmed S. Darwish. - Fix WoL regressions in r8169, from Heiner Kallweit. - Fix qed crashes in kdump mode, from Alok Prasad. - Fix the callbacks used for certain thermal zones in mlxsw, from Vadim Pasternak. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits) net: dsa: lantiq_gswip: fix and improve the unsupported interface error mlxsw: core: Use different get_trend() callbacks for different thermal zones net: dp83869: Reset return variable if PHY strap is read rhashtable: Drop raw RCU deref in nested_table_free cxgb4: Use kfree() instead kvfree() where appropriate net: qed: fixes crash while running driver in kdump kernel vsock/vmci: make vmci_vsock_transport_cb() static net: ethtool: Fix comment mentioning typo in IS_ENABLED() net: phy: mscc: fix Serdes configuration in vsc8584_config_init net: mscc: Fix OF_MDIO config check net: marvell: Fix OF_MDIO config check net: dp83867: Fix OF_MDIO config check net: dp83869: Fix OF_MDIO config check net: ethernet: mvneta: fix MVNETA_SKB_HEADROOM alignment ethtool: linkinfo: remove an unnecessary NULL check net/xdp: use shift instead of 64 bit division crypto/chtls:Fix compile error when CONFIG_IPV6 is disabled inet_connection_sock: clear inet_num out of destroy helper yam: fix possible memory leak in yam_init_driver lan743x: Use correct MAC_CR configuration for 1 GBit speed ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-nextLinus Torvalds authored
Pull sparc updates from David Miller: - Rework the sparc32 page tables so that READ_ONCE(*pmd), as done by generic code, operates on a word sized element. From Will Deacon. - Some scnprintf() conversions, from Chen Zhou. - A pin_user_pages() conversion from John Hubbard. - Several 32-bit ptrace register handling fixes and such from Al Viro. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()" sparc32: mm: Only call ctor()/dtor() functions for first and last user sparc32: mm: Disable SPLIT_PTLOCK_CPUS sparc32: mm: Don't try to free page-table pages if ctor() fails sparc32: register memory occupied by kernel as memblock.memory sparc: remove unused header file nfs_fs.h sparc32: fix register window handling in genregs32_[gs]et() sparc64: fix misuses of access_process_vm() in genregs32_[sg]et() oradax: convert get_user_pages() --> pin_user_pages() sparc: use scnprintf() in show_pciobppath_attr() in vio.c sparc: use scnprintf() in show_pciobppath_attr() in pci.c tty: vcc: Fix error return code in vcc_probe() sparc32: mm: Reduce allocation size for PMD and PTE tables sparc32: mm: Change pgtable_t type to pte_t * instead of struct page * sparc32: mm: Restructure sparc32 MMU page-table layout sparc32: mm: Fix argument checking in __srmmu_get_nocache() sparc64: Replace zero-length array with flexible-array sparc: mm: return true,false in kern_addr_valid()
-
-
Martin Blumenstingl authored
While trying to use the lantiq_gswip driver on one of my boards I made a mistake when specifying the phy-mode (because the out-of-tree driver wants phy-mode "gmii" or "mii" for the internal PHYs). In this case the following error is printed multiple times: Unsupported interface: 3 While it gives at least a hint at what may be wrong it is not very user friendly. Print the human readable phy-mode and also which port is configured incorrectly (this hardware supports ports 0..6) to improve the cases where someone made a mistake. Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
- 07 Jun, 2020 1 commit
-
-
Vadim Pasternak authored
The driver registers three different types of thermal zones: For the ASIC itself, for port modules and for gearboxes. Currently, all three types use the same get_trend() callback which does not work correctly for the ASIC thermal zone. The callback assumes that the device data is of type 'struct mlxsw_thermal_module', whereas for the ASIC thermal zone 'struct mlxsw_thermal' is passed as device data. Fix this by using one get_trend() callback for the ASIC thermal zone and another for the other two types. Fixes: 6f73862f ("mlxsw: core: Add the hottest thermal zone detection") Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
