1. 17 Mar, 2019 3 commits
  2. 03 Mar, 2019 2 commits
  3. 02 Mar, 2019 11 commits
    • Linus Torvalds's avatar
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · e7c42a89
      Linus Torvalds authored
      Pull x86 fixes from Thomas Gleixner:
       "Two last minute fixes:
      
         - Prevent value evaluation via functions happening in the user access
           enabled region of __put_user() (put another way: make sure to
           evaluate the value to be stored in user space _before_ enabling
           user space accesses)
      
         - Correct the definition of a Hyper-V hypercall constant"
      
      * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86/hyper-v: Fix definition of HV_MAX_FLUSH_REP_COUNT
        x86/uaccess: Don't leak the AC flag into __put_user() value evaluation
      e7c42a89
    • Linus Torvalds's avatar
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · df49fd0f
      Linus Torvalds authored
      Pull SCSI fixes from James Bottomley:
       "Nine small fixes.
      
        The resume fix is a cosmetic removal of a warning with an incorrect
        condition causing it to alarm people wrongly.
      
        The other eight patches correct a thinko in Christoph Hellwig's DMA
        conversion series. Without it all these drivers end up with 32 bit DMA
        masks meaning they bounce any page over 4GB before sending it to the
        controller.
      
        Nowadays, even laptops mostly have memory above 4GB, so this can lead
        to significant performance degradation with all the bouncing"
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        scsi: core: Avoid that system resume triggers a kernel warning
        scsi: hptiop: fix calls to dma_set_mask()
        scsi: hisi_sas: fix calls to dma_set_mask_and_coherent()
        scsi: csiostor: fix calls to dma_set_mask_and_coherent()
        scsi: bfa: fix calls to dma_set_mask_and_coherent()
        scsi: aic94xx: fix calls to dma_set_mask_and_coherent()
        scsi: 3w-sas: fix calls to dma_set_mask_and_coherent()
        scsi: 3w-9xxx: fix calls to dma_set_mask_and_coherent()
        scsi: lpfc: fix calls to dma_set_mask_and_coherent()
      df49fd0f
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · c93d9218
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Fix refcount leak in act_ipt during replace, from Davide Caratti.
      
       2) Set task state properly in tun during blocking reads, from Timur
          Celik.
      
       3) Leaked reference in DSA, from Wen Yang.
      
       4) NULL deref in act_tunnel_key, from Vlad Buslov.
      
       5) cipso_v4_erro can reference the skb IPCB in inappropriate contexts
          thus referencing garbage, from Nazarov Sergey.
      
       6) Don't accept RTA_VIA and RTA_GATEWAY in contexts where those
          attributes make no sense.
      
       7) Fix hung sendto in tipc, from Tung Nguyen.
      
       8) Out-of-bounds access in netlabel, from Paul Moore.
      
       9) Grant reference leak in xen-netback, from Igor Druzhinin.
      
      10) Fix tx stalls with lan743x, from Bryan Whitehead.
      
      11) Fix interrupt storm with mv88e6xxx, from Hein Kallweit.
      
      12) Memory leak in sit on device registry failure, from Mao Wenan.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
        net: sit: fix memory leak in sit_init_net()
        net: dsa: mv88e6xxx: Fix statistics on mv88e6161
        geneve: correctly handle ipv6.disable module parameter
        net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode
        bpf: fix sanitation rewrite in case of non-pointers
        ipv4: Add ICMPv6 support when parse route ipproto
        MIPS: eBPF: Fix icache flush end address
        lan743x: Fix TX Stall Issue
        net: phy: phylink: fix uninitialized variable in phylink_get_mac_state
        net: aquantia: regression on cpus with high cores: set mode with 8 queues
        selftests: fixes for UDP GRO
        bpf: drop refcount if bpf_map_new_fd() fails in map_create()
        net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X
        net: dsa: mv88e6xxx: Fix u64 statistics
        xen-netback: don't populate the hash cache on XenBus disconnect
        xen-netback: fix occasional leak of grant ref mappings under memory pressure
        sctp: chunk.c: correct format string for size_t in printk
        net: netem: fix skb length BUG_ON in __skb_to_sgvec
        netlabel: fix out-of-bounds memory accesses
        ipv4: Pass original device to ip_rcv_finish_core
        ...
      c93d9218
    • Linus Torvalds's avatar
      Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 · fa3294c5
      Linus Torvalds authored
      Pull more crypto fixes from Herbert Xu:
       "This fixes a couple of issues in arm64/chacha that was introduced in
        5.0"
      
      * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
        crypto: arm64/chacha - fix hchacha_block_neon() for big endian
        crypto: arm64/chacha - fix chacha_4block_xor_neon() for big endian
      fa3294c5
    • Mao Wenan's avatar
      net: sit: fix memory leak in sit_init_net() · 07f12b26
      Mao Wenan authored
      If register_netdev() is failed to register sitn->fb_tunnel_dev,
      it will go to err_reg_dev and forget to free netdev(sitn->fb_tunnel_dev).
      
      BUG: memory leak
      unreferenced object 0xffff888378daad00 (size 512):
        comm "syz-executor.1", pid 4006, jiffies 4295121142 (age 16.115s)
        hex dump (first 32 bytes):
          00 e6 ed c0 83 88 ff ff 00 00 00 00 00 00 00 00  ................
          00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      backtrace:
          [<00000000d6dcb63e>] kvmalloc include/linux/mm.h:577 [inline]
          [<00000000d6dcb63e>] kvzalloc include/linux/mm.h:585 [inline]
          [<00000000d6dcb63e>] netif_alloc_netdev_queues net/core/dev.c:8380 [inline]
          [<00000000d6dcb63e>] alloc_netdev_mqs+0x600/0xcc0 net/core/dev.c:8970
          [<00000000867e172f>] sit_init_net+0x295/0xa40 net/ipv6/sit.c:1848
          [<00000000871019fa>] ops_init+0xad/0x3e0 net/core/net_namespace.c:129
          [<00000000319507f6>] setup_net+0x2ba/0x690 net/core/net_namespace.c:314
          [<0000000087db4f96>] copy_net_ns+0x1dc/0x330 net/core/net_namespace.c:437
          [<0000000057efc651>] create_new_namespaces+0x382/0x730 kernel/nsproxy.c:107
          [<00000000676f83de>] copy_namespaces+0x2ed/0x3d0 kernel/nsproxy.c:165
          [<0000000030b74bac>] copy_process.part.27+0x231e/0x6db0 kernel/fork.c:1919
          [<00000000fff78746>] copy_process kernel/fork.c:1713 [inline]
          [<00000000fff78746>] _do_fork+0x1bc/0xe90 kernel/fork.c:2224
          [<000000001c2e0d1c>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
          [<00000000ec48bd44>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
          [<0000000039acff8a>] 0xffffffffffffffff
      Signed-off-by: default avatarMao Wenan <maowenan@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      07f12b26
    • Andrew Lunn's avatar
      net: dsa: mv88e6xxx: Fix statistics on mv88e6161 · a6da21bb
      Andrew Lunn authored
      Despite what the datesheet says, the silicon implements the older way
      of snapshoting the statistics. Change the op.
      
      Reported-by: Chris.Healy@zii.aero
      Tested-by: Chris.Healy@zii.aero
      Fixes: 0ac64c39 ("net: dsa: mv88e6xxx: mv88e6161 uses mv88e6320 stats snapshot")
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a6da21bb
    • Jiri Benc's avatar
      geneve: correctly handle ipv6.disable module parameter · cf1c9ccb
      Jiri Benc authored
      When IPv6 is compiled but disabled at runtime, geneve_sock_add returns
      -EAFNOSUPPORT. For metadata based tunnels, this causes failure of the whole
      operation of bringing up the tunnel.
      
      Ignore failure of IPv6 socket creation for metadata based tunnels caused by
      IPv6 not being available.
      
      This is the same fix as what commit d074bf96 ("vxlan: correctly handle
      ipv6.disable module parameter") is doing for vxlan.
      
      Note there's also commit c0a47e44 ("geneve: should not call rt6_lookup()
      when ipv6 was disabled") which fixes a similar issue but for regular
      tunnels, while this patch is needed for metadata based tunnels.
      Signed-off-by: default avatarJiri Benc <jbenc@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cf1c9ccb
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · f08d6114
      David S. Miller authored
      Alexei Starovoitov says:
      
      ====================
      pull-request: bpf 2019-03-01
      
      The following pull-request contains BPF updates for your *net* tree.
      
      The main changes are:
      
      1) fix sanitation rewrite, from Daniel.
      
      2) fix error path on map_new_fd, from Peng.
      
      3) fix icache flush address, from Paul.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f08d6114
    • Heiner Kallweit's avatar
      net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode · ed8fe202
      Heiner Kallweit authored
      When debugging another issue I faced an interrupt storm in this
      driver (88E6390, port 9 in SGMII mode), consisting of alternating
      link-up / link-down interrupts. Analysis showed that the driver
      wanted to set a cmode that was set already. But so far
      mv88e6390x_port_set_cmode() doesn't check this and powers down
      SERDES, what causes the link to break, and eventually results in
      the described interrupt storm.
      
      Fix this by checking whether the cmode actually changes. We want
      that the very first call to mv88e6390x_port_set_cmode() always
      configures the registers, therefore initialize port.cmode with
      a value that is different from any supported cmode value.
      We have to take care that we only init the ports cmode once
      chip->info->num_ports is set.
      
      v2:
      - add small helper and init the number of actual ports only
      
      Fixes: 364e9d77 ("net: dsa: mv88e6xxx: Power on/off SERDES on cmode change")
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ed8fe202
    • Daniel Borkmann's avatar
      bpf: fix sanitation rewrite in case of non-pointers · 3612af78
      Daniel Borkmann authored
      Marek reported that he saw an issue with the below snippet in that
      timing measurements where off when loaded as unpriv while results
      were reasonable when loaded as privileged:
      
          [...]
          uint64_t a = bpf_ktime_get_ns();
          uint64_t b = bpf_ktime_get_ns();
          uint64_t delta = b - a;
          if ((int64_t)delta > 0) {
          [...]
      
      Turns out there is a bug where a corner case is missing in the fix
      d3bd7413 ("bpf: fix sanitation of alu op with pointer / scalar
      type from different paths"), namely fixup_bpf_calls() only checks
      whether aux has a non-zero alu_state, but it also needs to test for
      the case of BPF_ALU_NON_POINTER since in both occasions we need to
      skip the masking rewrite (as there is nothing to mask).
      
      Fixes: d3bd7413 ("bpf: fix sanitation of alu op with pointer / scalar type from different paths")
      Reported-by: default avatarMarek Majkowski <marek@cloudflare.com>
      Reported-by: default avatarArthur Fabre <afabre@cloudflare.com>
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Link: https://lore.kernel.org/netdev/CAJPywTJqP34cK20iLM5YmUMz9KXQOdu1-+BZrGMAGgLuBWz7fg@mail.gmail.com/T/Acked-by: default avatarSong Liu <songliubraving@fb.com>
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      3612af78
    • Hangbin Liu's avatar
      ipv4: Add ICMPv6 support when parse route ipproto · 5e1a99ea
      Hangbin Liu authored
      For ip rules, we need to use 'ipproto ipv6-icmp' to match ICMPv6 headers.
      But for ip -6 route, currently we only support tcp, udp and icmp.
      
      Add ICMPv6 support so we can match ipv6-icmp rules for route lookup.
      
      v2: As David Ahern and Sabrina Dubroca suggested, Add an argument to
      rtm_getroute_parse_ip_proto() to handle ICMP/ICMPv6 with different family.
      Reported-by: default avatarJianlin Shi <jishi@redhat.com>
      Fixes: eacb9384 ("ipv6: support sport, dport and ip_proto in RTM_GETROUTE")
      Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5e1a99ea
  4. 01 Mar, 2019 13 commits
    • Paul Burton's avatar
      MIPS: eBPF: Fix icache flush end address · d1a2930d
      Paul Burton authored
      The MIPS eBPF JIT calls flush_icache_range() in order to ensure the
      icache observes the code that we just wrote. Unfortunately it gets the
      end address calculation wrong due to some bad pointer arithmetic.
      
      The struct jit_ctx target field is of type pointer to u32, and as such
      adding one to it will increment the address being pointed to by 4 bytes.
      Therefore in order to find the address of the end of the code we simply
      need to add the number of 4 byte instructions emitted, but we mistakenly
      add the number of instructions multiplied by 4. This results in the call
      to flush_icache_range() operating on a memory region 4x larger than
      intended, which is always wasteful and can cause crashes if we overrun
      into an unmapped page.
      
      Fix this by correcting the pointer arithmetic to remove the bogus
      multiplication, and use braces to remove the need for a set of brackets
      whilst also making it obvious that the target field is a pointer.
      Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
      Fixes: b6bd53f9 ("MIPS: Add missing file for eBPF JIT.")
      Cc: Alexei Starovoitov <ast@kernel.org>
      Cc: Daniel Borkmann <daniel@iogearbox.net>
      Cc: Martin KaFai Lau <kafai@fb.com>
      Cc: Song Liu <songliubraving@fb.com>
      Cc: Yonghong Song <yhs@fb.com>
      Cc: netdev@vger.kernel.org
      Cc: bpf@vger.kernel.org
      Cc: linux-mips@vger.kernel.org
      Cc: stable@vger.kernel.org # v4.13+
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      d1a2930d
    • Bryan Whitehead's avatar
      lan743x: Fix TX Stall Issue · 90490ef7
      Bryan Whitehead authored
      It has been observed that tx queue stalls while downloading
      from certain web sites (example www.speedtest.net)
      
      The cause has been tracked down to a corner case where
      dma descriptors where not setup properly. And there for a tx
      completion interrupt was not signaled.
      
      This fix corrects the problem by properly marking the end of
      a multi descriptor transmission.
      
      Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver")
      Signed-off-by: default avatarBryan Whitehead <Bryan.Whitehead@microchip.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      90490ef7
    • Heiner Kallweit's avatar
      net: phy: phylink: fix uninitialized variable in phylink_get_mac_state · d25ed413
      Heiner Kallweit authored
      When debugging an issue I found implausible values in state->pause.
      Reason in that state->pause isn't initialized and later only single
      bits are changed. Also the struct itself isn't initialized in
      phylink_resolve(). So better initialize state->pause and other
      not yet initialized fields.
      
      v2:
      - use right function name in subject
      v3:
      - initialize additional fields
      
      Fixes: 9525ae83 ("phylink: add phylink infrastructure")
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d25ed413
    • Dmitry Bogdanov's avatar
      net: aquantia: regression on cpus with high cores: set mode with 8 queues · 15f3ddf5
      Dmitry Bogdanov authored
      Recently the maximum number of queues was increased up to 8, but
      NIC was not fully configured for 8 queues. In setups with more than 4 CPU
      cores parts of TX traffic gets lost if the kernel routes it to queues 4th-8th.
      
      This patch sets a tx hw traffic mode with 8 queues.
      
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202651
      
      Fixes: 71a963cf ("net: aquantia: increase max number of hw queues")
      Reported-by: default avatarNicholas Johnson <nicholas.johnson@outlook.com.au>
      Signed-off-by: default avatarDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
      Signed-off-by: default avatarIgor Russkikh <igor.russkikh@aquantia.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      15f3ddf5
    • Paolo Abeni's avatar
      selftests: fixes for UDP GRO · ada641ff
      Paolo Abeni authored
      The current implementation for UDP GRO tests is racy: the receiver
      may flush the RX queue while the sending is still transmitting and
      incorrectly report RX errors, with a wrong number of packet received.
      
      Add explicit timeouts to the receiver for both connection activation
      (first packet received for UDP) and reception completion, so that
      in the above critical scenario the receiver will wait for the
      transfer completion.
      
      Fixes: 3327a9c4 ("selftests: add functionals test for UDP GRO")
      Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      Acked-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ada641ff
    • Linus Torvalds's avatar
      Merge tag 'iommu-fix-v5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu · a215ce8f
      Linus Torvalds authored
      Pull IOMMU fix from Joerg Roedel:
       "One important fix for a memory corruption issue in the Intel VT-d
        driver that triggers on hardware with deep PCI hierarchies"
      
      * tag 'iommu-fix-v5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
        iommu/dmar: Fix buffer overflow during PCI bus notification
      a215ce8f
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew) · 2d28e01d
      Linus Torvalds authored
      Merge misc fixes from Andrew Morton:
       "2 fixes"
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        hugetlbfs: fix races and page leaks during migration
        kasan: turn off asan-stack for clang-8 and earlier
      2d28e01d
    • Mike Kravetz's avatar
      hugetlbfs: fix races and page leaks during migration · cb6acd01
      Mike Kravetz authored
      hugetlb pages should only be migrated if they are 'active'.  The
      routines set/clear_page_huge_active() modify the active state of hugetlb
      pages.
      
      When a new hugetlb page is allocated at fault time, set_page_huge_active
      is called before the page is locked.  Therefore, another thread could
      race and migrate the page while it is being added to page table by the
      fault code.  This race is somewhat hard to trigger, but can be seen by
      strategically adding udelay to simulate worst case scheduling behavior.
      Depending on 'how' the code races, various BUG()s could be triggered.
      
      To address this issue, simply delay the set_page_huge_active call until
      after the page is successfully added to the page table.
      
      Hugetlb pages can also be leaked at migration time if the pages are
      associated with a file in an explicitly mounted hugetlbfs filesystem.
      For example, consider a two node system with 4GB worth of huge pages
      available.  A program mmaps a 2G file in a hugetlbfs filesystem.  It
      then migrates the pages associated with the file from one node to
      another.  When the program exits, huge page counts are as follows:
      
        node0
        1024    free_hugepages
        1024    nr_hugepages
      
        node1
        0       free_hugepages
        1024    nr_hugepages
      
        Filesystem                         Size  Used Avail Use% Mounted on
        nodev                              4.0G  2.0G  2.0G  50% /var/opt/hugepool
      
      That is as expected.  2G of huge pages are taken from the free_hugepages
      counts, and 2G is the size of the file in the explicitly mounted
      filesystem.  If the file is then removed, the counts become:
      
        node0
        1024    free_hugepages
        1024    nr_hugepages
      
        node1
        1024    free_hugepages
        1024    nr_hugepages
      
        Filesystem                         Size  Used Avail Use% Mounted on
        nodev                              4.0G  2.0G  2.0G  50% /var/opt/hugepool
      
      Note that the filesystem still shows 2G of pages used, while there
      actually are no huge pages in use.  The only way to 'fix' the filesystem
      accounting is to unmount the filesystem
      
      If a hugetlb page is associated with an explicitly mounted filesystem,
      this information in contained in the page_private field.  At migration
      time, this information is not preserved.  To fix, simply transfer
      page_private from old to new page at migration time if necessary.
      
      There is a related race with removing a huge page from a file and
      migration.  When a huge page is removed from the pagecache, the
      page_mapping() field is cleared, yet page_private remains set until the
      page is actually freed by free_huge_page().  A page could be migrated
      while in this state.  However, since page_mapping() is not set the
      hugetlbfs specific routine to transfer page_private is not called and we
      leak the page count in the filesystem.
      
      To fix that, check for this condition before migrating a huge page.  If
      the condition is detected, return EBUSY for the page.
      
      Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
      Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
      Fixes: bcc54222 ("mm: hugetlb: introduce page_huge_active")
      Signed-off-by: default avatarMike Kravetz <mike.kravetz@oracle.com>
      Reviewed-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Michal Hocko <mhocko@kernel.org>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
      Cc: Mel Gorman <mgorman@techsingularity.net>
      Cc: Davidlohr Bueso <dave@stgolabs.net>
      Cc: <stable@vger.kernel.org>
      [mike.kravetz@oracle.com: v2]
        Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
      [mike.kravetz@oracle.com: update comment and changelog]
        Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.comSigned-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      cb6acd01
    • Arnd Bergmann's avatar
      kasan: turn off asan-stack for clang-8 and earlier · 6baec880
      Arnd Bergmann authored
      Building an arm64 allmodconfig kernel with clang results in over 140
      warnings about overly large stack frames, the worst ones being:
      
        drivers/gpu/drm/panel/panel-sitronix-st7789v.c:196:12: error: stack frame size of 20224 bytes in function 'st7789v_prepare'
        drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c:196:12: error: stack frame size of 13120 bytes in function 'td028ttec1_panel_enable'
        drivers/usb/host/max3421-hcd.c:1395:1: error: stack frame size of 10048 bytes in function 'max3421_spi_thread'
        drivers/net/wan/slic_ds26522.c:209:12: error: stack frame size of 9664 bytes in function 'slic_ds26522_probe'
        drivers/crypto/ccp/ccp-ops.c:2434:5: error: stack frame size of 8832 bytes in function 'ccp_run_cmd'
        drivers/media/dvb-frontends/stv0367.c:1005:12: error: stack frame size of 7840 bytes in function 'stv0367ter_algo'
      
      None of these happen with gcc today, and almost all of these are the
      result of a single known issue in llvm.  Hopefully it will eventually
      get fixed with the clang-9 release.
      
      In the meantime, the best idea I have is to turn off asan-stack for
      clang-8 and earlier, so we can produce a kernel that is safe to run.
      
      I have posted three patches that address the frame overflow warnings
      that are not addressed by turning off asan-stack, so in combination with
      this change, we get much closer to a clean allmodconfig build, which in
      turn is necessary to do meaningful build regression testing.
      
      It is still possible to turn on the CONFIG_ASAN_STACK option on all
      versions of clang, and it's always enabled for gcc, but when
      CONFIG_COMPILE_TEST is set, the option remains invisible, so
      allmodconfig and randconfig builds (which are normally done with a
      forced CONFIG_COMPILE_TEST) will still result in a mostly clean build.
      
      Link: http://lkml.kernel.org/r/20190222222950.3997333-1-arnd@arndb.de
      Link: https://bugs.llvm.org/show_bug.cgi?id=38809Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Reviewed-by: default avatarQian Cai <cai@lca.pw>
      Reviewed-by: default avatarMark Brown <broonie@kernel.org>
      Acked-by: default avatarAndrey Ryabinin <aryabinin@virtuozzo.com>
      Cc: Dmitry Vyukov <dvyukov@google.com>
      Cc: Nick Desaulniers <ndesaulniers@google.com>
      Cc: Kostya Serebryany <kcc@google.com>
      Cc: Andrey Konovalov <andreyknvl@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6baec880
    • Linus Torvalds's avatar
      Merge tag 'drm-fixes-2019-03-01' of git://anongit.freedesktop.org/drm/drm · 6357c812
      Linus Torvalds authored
      Pull drm fixes from Dave Airlie:
       "Three final fixes, one for a feature that is new in this kernel, one
        bochs fix for qemu riscv and one atomic modesetting fix.
      
        I've left a few of the other late fixes until next as I didn't want to
        throw in anything that wasn't really necessary"
      
      * tag 'drm-fixes-2019-03-01' of git://anongit.freedesktop.org/drm/drm:
        drm/bochs: Fix the ID mismatch error
        drm: Block fb changes for async plane updates
        drm/amd/display: Use vrr friendly pageflip throttling in DC.
      6357c812
    • Peng Sun's avatar
      bpf: drop refcount if bpf_map_new_fd() fails in map_create() · 352d20d6
      Peng Sun authored
      In bpf/syscall.c, map_create() first set map->usercnt to 1, a file
      descriptor is supposed to return to userspace. When bpf_map_new_fd()
      fails, drop the refcount.
      
      Fixes: bd5f5f4e ("bpf: Add BPF_MAP_GET_FD_BY_ID")
      Signed-off-by: default avatarPeng Sun <sironhide0null@gmail.com>
      Acked-by: default avatarMartin KaFai Lau <kafai@fb.com>
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      352d20d6
    • Arnd Bergmann's avatar
      Merge tag 'qcom-fixes-for-5.0-rc8' of... · 6089e656
      Arnd Bergmann authored
      Merge tag 'qcom-fixes-for-5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/fixes
      
      Qualcomm ARM64 Fixes for 5.0-rc8
      
      * Fix TZ memory area size to avoid crashes during boot
      
      * tag 'qcom-fixes-for-5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
        arm64: dts: qcom: msm8998: Extend TZ reserved memory area
      6089e656
    • Arnd Bergmann's avatar
      Merge tag 'tee-fix-for-v5.0' of... · 36baa6ed
      Arnd Bergmann authored
      Merge tag 'tee-fix-for-v5.0' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
      
      OP-TEE driver
      - add missing of_node_put after of_device_is_available
      
      * tag 'tee-fix-for-v5.0' of https://git.linaro.org/people/jens.wiklander/linux-tee:
        tee: optee: add missing of_node_put after of_device_is_available
      36baa6ed
  5. 28 Feb, 2019 11 commits
    • Linus Torvalds's avatar
      Merge tag 'mips_fixes_5.0_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux · bf23aba1
      Linus Torvalds authored
      Pull MIPS fixes from Paul Burton:
       "A few more MIPS fixes:
      
         - Fix 16b cmpxchg() operations which could erroneously fail if bits
           15:8 of the old value are non-zero. In practice I'm not aware of
           any actual users of 16b cmpxchg() on MIPS, but this fixes the
           support for it was was introduced in v4.13.
      
         - Provide a struct device to dma_alloc_coherent for Lantiq XWAY
           systems with a "Voice MIPS Macro Core" (VMMC) device.
      
         - Provide DMA masks for BCM63xx ethernet devices, fixing a regression
           introduced in v4.19.
      
         - Fix memblock reservation for the kernel when the system has a
           non-zero PHYS_OFFSET, correcting the memblock conversion performed
           in v4.20"
      
      * tag 'mips_fixes_5.0_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
        MIPS: fix memory setup for platforms with PHYS_OFFSET != 0
        MIPS: BCM63XX: provide DMA masks for ethernet devices
        MIPS: lantiq: pass struct device to DMA API functions
        MIPS: fix truncation in __cmpxchg_small for short values
      bf23aba1
    • Linus Torvalds's avatar
      Merge tag 'for-linus-5.0-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux · 3eb07d20
      Linus Torvalds authored
      Pull orangefs fixlet from Mike Marshall:
       "Remove two un-needed BUG_ONs"
      
      * tag 'for-linus-5.0-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
        orangefs: remove two un-needed BUG_ONs...
      3eb07d20
    • Maxime Chevallier's avatar
      net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X · d235c48b
      Maxime Chevallier authored
      Upon setting the cmode on 6390 and 6390X, the associated serdes
      interfaces must be powered off/on.
      
      Both 6390X and 6390 share code to do so, but it currently uses the 6390
      specific helper mv88e6390_serdes_power() to disable and enable the
      serdes interface.
      
      This call will fail silently on 6390X when trying so set a 10G interface
      such as XAUI or RXAUI, since mv88e6390_serdes_power() internally grabs
      the lane number based on modes supported by the 6390, and returns 0 when
      getting -ENODEV as a lane number.
      
      Using mv88e6390x_serdes_power() should be safe here, since we explicitly
      rule-out all ports but the 9 and 10, and because modes supported by 6390
      ports 9 and 10 are a subset of those supported on 6390X.
      
      This was tested on 6390X using RXAUI mode.
      
      Fixes: 364e9d77 ("net: dsa: mv88e6xxx: Power on/off SERDES on cmode change")
      Signed-off-by: default avatarMaxime Chevallier <maxime.chevallier@bootlin.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d235c48b
    • Andrew Lunn's avatar
      net: dsa: mv88e6xxx: Fix u64 statistics · 6e46e2d8
      Andrew Lunn authored
      The switch maintains u64 counters for the number of octets sent and
      received. These are kept as two u32's which need to be combined.  Fix
      the combing, which wrongly worked on u16's.
      
      Fixes: 80c4627b ("dsa: mv88x6xxx: Refactor getting a single statistic")
      Reported-by: default avatarChris Healy <Chris.Healy@zii.aero>
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6e46e2d8
    • Igor Druzhinin's avatar
      xen-netback: don't populate the hash cache on XenBus disconnect · a2288d4e
      Igor Druzhinin authored
      Occasionally, during the disconnection procedure on XenBus which
      includes hash cache deinitialization there might be some packets
      still in-flight on other processors. Handling of these packets includes
      hashing and hash cache population that finally results in hash cache
      data structure corruption.
      
      In order to avoid this we prevent hashing of those packets if there
      are no queues initialized. In that case RCU protection of queues guards
      the hash cache as well.
      Signed-off-by: default avatarIgor Druzhinin <igor.druzhinin@citrix.com>
      Reviewed-by: default avatarPaul Durrant <paul.durrant@citrix.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a2288d4e
    • Igor Druzhinin's avatar
      xen-netback: fix occasional leak of grant ref mappings under memory pressure · 99e87f56
      Igor Druzhinin authored
      Zero-copy callback flag is not yet set on frag list skb at the moment
      xenvif_handle_frag_list() returns -ENOMEM. This eventually results in
      leaking grant ref mappings since xenvif_zerocopy_callback() is never
      called for these fragments. Those eventually build up and cause Xen
      to kill Dom0 as the slots get reused for new mappings:
      
      "d0v0 Attempt to implicitly unmap a granted PTE c010000329fce005"
      
      That behavior is observed under certain workloads where sudden spikes
      of page cache writes coexist with active atomic skb allocations from
      network traffic. Additionally, rework the logic to deal with frag_list
      deallocation in a single place.
      Signed-off-by: default avatarPaul Durrant <paul.durrant@citrix.com>
      Signed-off-by: default avatarIgor Druzhinin <igor.druzhinin@citrix.com>
      Acked-by: default avatarWei Liu <wei.liu2@citrix.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      99e87f56
    • Matthias Maennich's avatar
      sctp: chunk.c: correct format string for size_t in printk · ac510505
      Matthias Maennich authored
      According to Documentation/core-api/printk-formats.rst, size_t should be
      printed with %zu, rather than %Zu.
      
      In addition, using %Zu triggers a warning on clang (-Wformat-extra-args):
      
      net/sctp/chunk.c:196:25: warning: data argument not used by format string [-Wformat-extra-args]
                                          __func__, asoc, max_data);
                                          ~~~~~~~~~~~~~~~~^~~~~~~~~
      ./include/linux/printk.h:440:49: note: expanded from macro 'pr_warn_ratelimited'
              printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
              ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
      ./include/linux/printk.h:424:17: note: expanded from macro 'printk_ratelimited'
                      printk(fmt, ##__VA_ARGS__);                             \
                             ~~~    ^
      
      Fixes: 5b5e0928 ("lib/vsprintf.c: remove %Z support")
      Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: default avatarMatthias Maennich <maennich@google.com>
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ac510505
    • Sheng Lan's avatar
      net: netem: fix skb length BUG_ON in __skb_to_sgvec · 5845f706
      Sheng Lan authored
      It can be reproduced by following steps:
      1. virtio_net NIC is configured with gso/tso on
      2. configure nginx as http server with an index file bigger than 1M bytes
      3. use tc netem to produce duplicate packets and delay:
         tc qdisc add dev eth0 root netem delay 100ms 10ms 30% duplicate 90%
      4. continually curl the nginx http server to get index file on client
      5. BUG_ON is seen quickly
      
      [10258690.371129] kernel BUG at net/core/skbuff.c:4028!
      [10258690.371748] invalid opcode: 0000 [#1] SMP PTI
      [10258690.372094] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G        W         5.0.0-rc6 #2
      [10258690.372094] RSP: 0018:ffffa05797b43da0 EFLAGS: 00010202
      [10258690.372094] RBP: 00000000000005ea R08: 0000000000000000 R09: 00000000000005ea
      [10258690.372094] R10: ffffa0579334d800 R11: 00000000000002c0 R12: 0000000000000002
      [10258690.372094] R13: 0000000000000000 R14: ffffa05793122900 R15: ffffa0578f7cb028
      [10258690.372094] FS:  0000000000000000(0000) GS:ffffa05797b40000(0000) knlGS:0000000000000000
      [10258690.372094] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [10258690.372094] CR2: 00007f1a6dc00868 CR3: 000000001000e000 CR4: 00000000000006e0
      [10258690.372094] Call Trace:
      [10258690.372094]  <IRQ>
      [10258690.372094]  skb_to_sgvec+0x11/0x40
      [10258690.372094]  start_xmit+0x38c/0x520 [virtio_net]
      [10258690.372094]  dev_hard_start_xmit+0x9b/0x200
      [10258690.372094]  sch_direct_xmit+0xff/0x260
      [10258690.372094]  __qdisc_run+0x15e/0x4e0
      [10258690.372094]  net_tx_action+0x137/0x210
      [10258690.372094]  __do_softirq+0xd6/0x2a9
      [10258690.372094]  irq_exit+0xde/0xf0
      [10258690.372094]  smp_apic_timer_interrupt+0x74/0x140
      [10258690.372094]  apic_timer_interrupt+0xf/0x20
      [10258690.372094]  </IRQ>
      
      In __skb_to_sgvec(), the skb->len is not equal to the sum of the skb's
      linear data size and nonlinear data size, thus BUG_ON triggered.
      Because the skb is cloned and a part of nonlinear data is split off.
      
      Duplicate packet is cloned in netem_enqueue() and may be delayed
      some time in qdisc. When qdisc len reached the limit and returns
      NET_XMIT_DROP, the skb will be retransmit later in write queue.
      the skb will be fragmented by tso_fragment(), the limit size
      that depends on cwnd and mss decrease, the skb's nonlinear
      data will be split off. The length of the skb cloned by netem
      will not be updated. When we use virtio_net NIC and invoke skb_to_sgvec(),
      the BUG_ON trigger.
      
      To fix it, netem returns NET_XMIT_SUCCESS to upper stack
      when it clones a duplicate packet.
      
      Fixes: 35d889d1 ("sch_netem: fix skb leak in netem_enqueue()")
      Signed-off-by: default avatarSheng Lan <lansheng@huawei.com>
      Reported-by: default avatarQin Ji <jiqin.ji@huawei.com>
      Suggested-by: default avatarEric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5845f706
    • Linus Torvalds's avatar
      Merge tag 'mmc-v5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc · 3a8ed368
      Linus Torvalds authored
      Pull MMC fixes from Ulf Hansson:
       "MMC core:
         - Fix NULL ptr crash for a special test case
         - Align max segment size with logical block size to prevent bugs in
           v5.1-rc1.
      
        MMC host:
         - cqhci: Minor fixes
         - tmio: Prevent interrupt storm
         - tmio: Fixup SD/MMC card initialization
         - spi: Allow card to be detected during probe
         - sdhci-esdhc-imx: Fixup fix for ERR004536"
      
      * tag 'mmc-v5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
        mmc: sdhci-esdhc-imx: correct the fix of ERR004536
        mmc: core: align max segment size with logical block size
        mmc: cqhci: Fix a tiny potential memory leak on error condition
        mmc: cqhci: fix space allocated for transfer descriptor
        mmc: core: Fix NULL ptr crash from mmc_should_fail_request
        mmc: tmio: fix access width of Block Count Register
        mmc: tmio_mmc_core: don't claim spurious interrupts
        mmc: spi: Fix card detection during probe
      3a8ed368
    • Linus Torvalds's avatar
      Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 · 3f25a599
      Linus Torvalds authored
      Pull crypto fixes from Herbert Xu:
       "This fixes a compiler warning introduced by a previous fix, as well as
        two crash bugs on ARM"
      
      * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
        crypto: sha512/arm - fix crash bug in Thumb2 build
        crypto: sha256/arm - fix crash bug in Thumb2 build
        crypto: ccree - add missing inline qualifier
      3f25a599
    • Greg Kroah-Hartman's avatar
      kvm: properly check debugfs dentry before using it · 8ed0579c
      Greg Kroah-Hartman authored
      debugfs can now report an error code if something went wrong instead of
      just NULL.  So if the return value is to be used as a "real" dentry, it
      needs to be checked if it is an error before dereferencing it.
      
      This is now happening because of ff9fb72b ("debugfs: return error
      values, not NULL").  syzbot has found a way to trigger multiple debugfs
      files attempting to be created, which fails, and then the error code
      gets passed to dentry_path_raw() which obviously does not like it.
      Reported-by: default avatarEric Biggers <ebiggers@kernel.org>
      Reported-and-tested-by: syzbot+7857962b4d45e602b8ad@syzkaller.appspotmail.com
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: kvm@vger.kernel.org
      Acked-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8ed0579c