- 28 Jul, 2022 10 commits
-
-
Danilo Krummrich authored
All IDRs in the DRM core and drivers which are applicable for using idr_init_base() over idr_init() should be set up to use a proper base in order to avoid unnecessary tree walks. Signed-off-by:
Danilo Krummrich <dakr@redhat.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220701190227.284783-3-dakr@redhat.com
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested/allocated, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
Danilo Krummrich authored
idr_init_base(), implemented by commit 6ce711f2 ("idr: Make 1-based IDRs more efficient"), let us set an arbitrary base other than idr_init(), which uses base 0. Since, for this IDR, no ID < 1 is ever requested, using idr_init_base(&idr, 1) avoids unnecessary tree walks. Signed-off-by:
-
- 27 Jul, 2022 4 commits
-
-
Daniel Vetter authored
No driver access this anymore, except for the olpc dcon fbdev driver but that has been marked as broken anyways by commit de0952f2 ("staging: olpc_dcon: mark driver as broken"). Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
-
Marek Vasut authored
Add support for Densitron DMT028VGHMCMI-1A TFT matrix into this driver. This is a DSI-attached 480x640 2.83 inch panel. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Guido Günther <agx@sigxcpu.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220725151703.319939-2-marex@denx.de
-
Marek Vasut authored
Add compatible string for Densitron DMT028VGHMCMI-1A TFT matrix. This is a DSI-attached 480x640 2.83 inch panel. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Slark Xiao authored
Replace 'the the' with 'the' in the comment. Signed-off-by:
Slark Xiao <slark_xiao@163.com> Signed-off-by:
-
- 26 Jul, 2022 7 commits
-
-
Thomas Zimmermann authored
Replace the driver's own function with drm_plane_helper_destroy(). No functional changes. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-8-tzimmermann@suse.de
-
Thomas Zimmermann authored
Replace the driver's own function with drm_plane_helper_destroy(). No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Export the individual plane helpers that make up the plane functions and align the naming with other helpers. The plane helpers are for non-atomic modesetting and exporting them will simplify a later conversion of drivers to atomic modesetting. With struct drm_plane_funcs removed from drm_plane_helper.h, also remove the include statements. It only needs linux/types.h for uint32_t and a number of forward declarations. Signed-off-by:
-
Thomas Zimmermann authored
Remove the include statement for drm_plane_helper.h from all the files that don't need it. Althogh the header file is almost empty, many drivers include it somewhere. Signed-off-by:
-
Thomas Zimmermann authored
Rename DRM_PLANE_HELPER_NO_SCALING to DRM_PLANE_NO_SCALING. The constant is not really a helper, but rather a characteristic of the plane itself. Signed-off-by:
-
Thomas Zimmermann authored
The macro DRM_PLANE_HELPER_NO_SCALING is only useful with the interfaces in drm_atomic_helper.h, but defined in drm_plane_helper.h. So half of DRM includes the latter header file for using this macro. Move the macro and remove the include statements. Signed-off-by:
-
Thomas Zimmermann authored
Fix coding style. No functional changes. Signed-off-by:
Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-2-tzimmermann@suse.de
-
- 22 Jul, 2022 8 commits
-
-
Javier Martinez Canillas authored
If devm_drm_of_get_bridge() can't find the connected bridge, it returns an ERR_PTR(-EPROBE_DEFER) to indicate that the probe should be deferred. But this path also prints an error message, which pollutes the kernel log since is printed on every probe deferral, i.e: $ dmesg | grep "failed to create panel bridge" | wc -l 38 Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220722074755.660258-1-javierm@redhat.com
-
Liviu Dudau authored
Komeda driver relies on the generic DRM atomic helper functions to handle commits. It only implements an atomic_commit_tail hook for the mode_config_helper_funcs and even that one is pretty close to the generic implementation with the exception of additional dma_fence signalling. What the generic helper framework doesn't do is waiting for the actual hardware to signal that the commit parameters have been written into the appropriate registers. As we signal CRTC events only on the irq handlers, we need to flush the configuration and wait for the hardware to respond. Add the Komeda specific implementation for atomic_commit_hw_done() that flushes and waits for flip done before calling drm_atomic_helper_commit_hw_done(). The fix was prompted by a patch from Carsten Haitzler where he was trying to solve the same issue but in a different way that I think can lead to wrong event signaling to userspace. Reported-by:
Carsten Haitzler <carsten.haitzler@arm.com> Tested-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220722122139.288486-1-liviu.dudau@arm.com
-
Carsten Haitzler authored
If something has already set up the DPU before the komeda driver comes up, it will fail to init because it was just writing to the SRST bit in the GCU control register and ignoring others. This resulted in TBU bringup stalling and init failing. By writing completely we also set the mode back to 0 (inactive) too and thus TBU bringup works. Signed-off-by:
-
Carsten Haitzler authored
The komeda driver doesn't come up with a visible text (FB) mode VT by default as it was missing legacy FB support. It's useful to have a working text VT on a system for debug and general usability, so enable it. You can always toggle CONFIG_FRAMEBUFFER_CONSOLE. Signed-off-by:
-
Robin Murphy authored
Since we no longer need to conform to the structure of the various DRM IRQ callbacks, we can streamline the code by consolidating the piecemeal functions and passing around our private data structure directly. We're also a platform device so should never see IRQ_NOTCONNECTED either. Furthermore we can also get rid of all the unnecesary read-modify-write operations, since on install we know we cleared the whole interrupt mask before enabling the debug IRQs, and thus on uninstall we're always clearing everything as well. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Acked-by:
-
Robin Murphy authored
The Arm Juno board EDK2 port has provided an EFI GOP display via HDLCD0 for some time now, which works nicely as an early framebuffer. However, once the HDLCD driver probes and takes over the hardware, it should take over the logical framebuffer as well, otherwise the now-defunct GOP device hangs about and virtual console output inevitably disappears into the wrong place most of the time. We'll do this after binding the HDMI encoder, since that's the most likely thing to fail, and the EFI console is still better than nothing when that happens. However, the two HDLCD controllers on Juno are independent, and many users will still be using older firmware without any display support, so we'll only bother if we find that the HDLCD we're probing is already enabled. And if it is, then we'll also stop it, since otherwise the display can end up shifted if it's still scanning out while the rest of the registers are subsequently reconfigured. Signed-off-by:
-
pengfuyuan authored
Fix spelling typo in comments. Reported-by:
k2ci <kernel-bot@kylinos.cn> Signed-off-by:
pengfuyuan <pengfuyuan@kylinos.cn> Acked-by:
-
Thomas Zimmermann authored
Reverse the order of the final two arguments when calling aperture_remove_conflicting_devices(). An error report is available at [1]. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
- 21 Jul, 2022 3 commits
-
-
Chen-Yu Tsai authored
The datasheet says that VDD12 must be enabled and at full voltage before VDD33 is enabled. Reorder the bulk regulator supply names so that VDD12 is enabled before VDD33. Any enable ramp delays should be handled by setting proper constraints on the regulators. Fixes: bc1aee7f ("drm/bridge: Add I2C based driver for ps8640 bridge") Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220721092258.3397461-1-wenst@chromium.org
-
Liu Zixian authored
On failure, these functions return error pointer, not NULL. Signed-off-by:
Liu Zixian <liuzixian4@huawei.com> Signed-off-by:
-
Wang Jingjin authored
Fix the error of implicit declaration of function 'drmm_of_get_bridge': drivers/gpu/drm/vc4/vc4_dpi.c:278:11: error: implicit declaration of function ‘drmm_of_get_bridge’; did you mean ‘devm_drm_of_get_bridge’? [-Werror=implicit-function-declaration] bridge = drmm_of_get_bridge(drm, dev->of_node, 0, 0); Fixes: 055af023 ("drm/vc4: dpi: Switch to drmm_of_get_bridge") Signed-off-by:
Wang Jingjin <wangjingjin1@huawei.com> Signed-off-by:
-
- 20 Jul, 2022 2 commits
-
-
Nícolas F. R. A. Prado authored
Add panel identification entry for the AUO B120XAN01.0 (product ID: 0x1062) panel. Signed-off-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by:
-
Nícolas F. R. A. Prado authored
Add panel identification entry for the IVO R140NWF5 RH (product ID: 0x057d) panel. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
-
- 19 Jul, 2022 6 commits
-
-
Dmitry Baryshkov authored
Now as the driver does not depend on pdata->connector, add support for attaching the bridge with DRM_BRIDGE_ATTACH_NO_CONNECTOR. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by:
Steev Klimaszewski <steev@kali.org> Reviewed-by:
-
Dmitry Baryshkov authored
Rather than reading the pdata->connector directly, fetch the connector using drm_atomic_state. This allows us to make pdata->connector optional (and thus supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR). Reviewed-by:
-
Christian König authored
We already discussed that the call to drm_sched_entity_select_rq() needs to move to drm_sched_job_arm() to be able to set a new scheduler list between _init() and _arm(). This was just not applied for some reason. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220714103902.7084-2-christian.koenig@amd.com
-
Geert Uytterhoeven authored
DRM formats are defined to be little-endian, unless the DRM_FORMAT_BIG_ENDIAN flag is set. Hence when converting from one format to another, multi-byte pixel values loaded from memory must be converted from little-endian to host-endian. Conversely, multi-byte pixel values written to memory must be converted from host-endian to little-endian. Currently only drm_fb_xrgb8888_to_rgb332_line() includes endianness handling. Fix gud_xrgb8888_to_color() on big-endian platforms by adding the missing endianness handling. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/b47589ed5d8ca44e0956684412e3f16f3227f887.1657300532.git.geert@linux-m68k.org
-
Geert Uytterhoeven authored
DRM formats are defined to be little-endian, unless the DRM_FORMAT_BIG_ENDIAN flag is set. Hence when converting from one format to another, multi-byte pixel values loaded from memory must be converted from little-endian to host-endian. Conversely, multi-byte pixel values written to memory must be converted from host-endian to little-endian. Currently only drm_fb_xrgb8888_to_rgb332_line() includes endianness handling. Fix this by adding endianness handling to all conversion functions that process multi-byte pixel values. Note that the conversion to RGB565 is special, as there are two versions: with and without byteswapping of the RGB565 pixel data. Signed-off-by:
-
Liang He authored
In tc_probe_bridge_endpoint(), we should call of_node_put() when breaking out of the for_each_endpoint_of_node() which will automatically increase and decrease the refcount. Fixes: 71f7d9c0 ("drm/bridge: tc358767: Detect bridge mode from connected endpoints in DT") Signed-off-by:
Liang He <windhl@126.com> Reviewed-by:
-
