- 04 Aug, 2020 28 commits
-
-
Edward Cree authored
Early in EF100 development there was a different format of event descriptor; if the NIC is somehow running the very old firmware which will use that format, fail the probe. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiafei Pan authored
The driver calls napi_schedule_irqoff() from a context where, in RT, hardirqs are not disabled, since the IRQ handler is force-threaded. In the call path of this function, __raise_softirq_irqoff() is modifying its per-CPU mask of pending softirqs that must be processed, using or_softirq_pending(). The or_softirq_pending() function is not atomic, but since interrupts are supposed to be disabled, nobody should be preempting it, and the operation should be safe. Nonetheless, when running with hardirqs on, as in the PREEMPT_RT case, it isn't safe, and the pending softirqs mask can get corrupted, resulting in softirqs being lost and never processed. To have common code that works with PREEMPT_RT and with mainline Linux, we can use plain napi_schedule() instead. The difference is that napi_schedule() (via __napi_schedule) also calls local_irq_save, which disables hardirqs if they aren't already. But, since they already are disabled in non-RT, this means that in practice we don't see any measurable difference in throughput or latency with this patch. Signed-off-by:
Jiafei Pan <Jiafei.Pan@nxp.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiafei Pan authored
The driver calls napi_schedule_irqoff() from a context where, in RT, hardirqs are not disabled, since the IRQ handler is force-threaded. In the call path of this function, __raise_softirq_irqoff() is modifying its per-CPU mask of pending softirqs that must be processed, using or_softirq_pending(). The or_softirq_pending() function is not atomic, but since interrupts are supposed to be disabled, nobody should be preempting it, and the operation should be safe. Nonetheless, when running with hardirqs on, as in the PREEMPT_RT case, it isn't safe, and the pending softirqs mask can get corrupted, resulting in softirqs being lost and never processed. To have common code that works with PREEMPT_RT and with mainline Linux, we can use plain napi_schedule() instead. The difference is that napi_schedule() (via __napi_schedule) also calls local_irq_save, which disables hardirqs if they aren't already. But, since they already are disabled in non-RT, this means that in practice we don't see any measurable difference in throughput or latency with this patch. Signed-off-by:
Jiafei Pan <Jiafei.Pan@nxp.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
net: dsa: loop: Preparatory changes for 802.1Q data path Florian Fainelli says: ==================== These patches are all meant to help pave the way for a 802.1Q data path added to the mockup driver, making it more useful than just testing for configuration. Sending those out now since there is no real need to wait. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
We only support DSA_LOOP_NUM_PORTS in the switch, do not tell the DSA core to allocate up to DSA_MAX_PORTS which is nearly the double (6 vs. 11). Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
For now we simply store the port MTU into a per-port member. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
In preparation for adding support for a mockup data path, move the driver data structures to include/linux/dsa/loop.h such that we can share them between net/dsa/ and drivers/net/dsa/ later on. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Allocate a 4K array of VLANs instead of limiting ourselves to just 5 which is arbitrary. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The PVID should be per-port, this is a preliminary change to support a 802.1Q data path in the driver. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rahul Lakkireddy authored
Matching IPv6 traffic require allocating their own individual slots in TCAM. So, fetch additional slots to insert IPv6 rules. Also, fetch the cumulative stats of all the slots occupied by the Matchall rule. Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
The current poll interval is enough to ensure that rising and falling edge events are not lost for a 1 PPS signal with 50% duty cycle. But when we deliver the events to user space, it will try to infer if they were corresponding to a rising or to a falling edge (the kernel driver doesn't know that either). User space will try to make that inference based on the time at which the PPS master had emitted the pulse (i.e. if it's a .0 time, it's rising edge, if it's .5 time, it's falling edge). But there is no in-kernel API for retrieving the precise timestamp corresponding to a PPS master (aka perout) pulse. So user space has to guess even that. It will read the PTP time on the PPS master right after we've delivered the extts event, and declare that the PPS master time was just the closest integer second, based on 2 thresholds (lower than .25, or higher than .75, and ignore anything else). Except that, if we poll for extts events (and our hardware doesn't really help us, by not providing an interrupt), then there is a risk that the poll period (and therefore the time at which the event is delivered) might confuse user space. Because we are always scheduling the next extts poll at SJA1105_EXTTS_INTERVAL "from now" (that's the only thing that the schedule_delayed_work() API gives us), it means that the start time of the next delayed workqueue will always be shifted to the right a little bit (shifted with the SPI access duration of this workqueue run). In turn, because user space sees extts events that are non-periodic compared to the PPS master's time, this means that it might start making wrong guesses about rising/falling edge. To understand the effect, here is the output of ts2phc currently. Notice the 'src' timestamps of the 'SKIP extts' events, and how they have a large wander. They keep increasing until the upper limit for the ignore threshold (.75 seconds), after which the application starts ignoring the _other_ edge. ts2phc[26.624]: /dev/ptp3 SKIP extts index 0 at 21.449898912 src 21.657784518 ts2phc[27.133]: adding tstamp 21.949894240 to clock /dev/ptp3 ts2phc[27.133]: adding tstamp 22.000000000 to clock /dev/ptp1 ts2phc[27.133]: /dev/ptp3 offset 640 s2 freq +5112 ts2phc[27.636]: /dev/ptp3 SKIP extts index 0 at 22.449889360 src 22.669398022 ts2phc[28.140]: adding tstamp 22.949884376 to clock /dev/ptp3 ts2phc[28.140]: adding tstamp 23.000000000 to clock /dev/ptp1 ts2phc[28.140]: /dev/ptp3 offset 96 s2 freq +4760 ts2phc[28.644]: /dev/ptp3 SKIP extts index 0 at 23.449879504 src 23.677420422 ts2phc[29.153]: adding tstamp 23.949874704 to clock /dev/ptp3 ts2phc[29.153]: adding tstamp 24.000000000 to clock /dev/ptp1 ts2phc[29.153]: /dev/ptp3 offset -264 s2 freq +4429 ts2phc[29.656]: /dev/ptp3 SKIP extts index 0 at 24.449870008 src 24.689407238 ts2phc[30.160]: adding tstamp 24.949865376 to clock /dev/ptp3 ts2phc[30.160]: adding tstamp 25.000000000 to clock /dev/ptp1 ts2phc[30.160]: /dev/ptp3 offset -280 s2 freq +4334 ts2phc[30.664]: /dev/ptp3 SKIP extts index 0 at 25.449860760 src 25.697449926 ts2phc[31.168]: adding tstamp 25.949856176 to clock /dev/ptp3 ts2phc[31.168]: adding tstamp 26.000000000 to clock /dev/ptp1 ts2phc[31.168]: /dev/ptp3 offset -176 s2 freq +4354 ts2phc[31.672]: /dev/ptp3 SKIP extts index 0 at 26.449851584 src 26.705433606 ts2phc[32.180]: adding tstamp 26.949846992 to clock /dev/ptp3 ts2phc[32.180]: adding tstamp 27.000000000 to clock /dev/ptp1 ts2phc[32.180]: /dev/ptp3 offset -80 s2 freq +4397 ts2phc[32.684]: /dev/ptp3 SKIP extts index 0 at 27.449842384 src 27.717415110 ts2phc[33.192]: adding tstamp 27.949837768 to clock /dev/ptp3 ts2phc[33.192]: adding tstamp 28.000000000 to clock /dev/ptp1 ts2phc[33.192]: /dev/ptp3 offset 0 s2 freq +4453 ts2phc[33.696]: /dev/ptp3 SKIP extts index 0 at 28.449833128 src 28.729412902 ts2phc[34.200]: adding tstamp 28.949828472 to clock /dev/ptp3 ts2phc[34.200]: adding tstamp 29.000000000 to clock /dev/ptp1 ts2phc[34.200]: /dev/ptp3 offset 8 s2 freq +4461 ts2phc[34.704]: /dev/ptp3 SKIP extts index 0 at 29.449823816 src 29.737416038 ts2phc[35.208]: adding tstamp 29.949819152 to clock /dev/ptp3 ts2phc[35.208]: adding tstamp 30.000000000 to clock /dev/ptp1 ts2phc[35.208]: /dev/ptp3 offset -8 s2 freq +4447 ts2phc[35.712]: /dev/ptp3 SKIP extts index 0 at 30.449814496 src 30.745554982 ts2phc[36.216]: adding tstamp 30.949809840 to clock /dev/ptp3 ts2phc[36.216]: adding tstamp 31.000000000 to clock /dev/ptp1 ts2phc[36.216]: /dev/ptp3 offset -8 s2 freq +4445 ts2phc[36.468]: /dev/ptp3 SKIP extts index 0 at 31.449805184 src 31.501109446 ts2phc[36.972]: adding tstamp 31.949800536 to clock /dev/ptp3 ts2phc[36.972]: adding tstamp 32.000000000 to clock /dev/ptp1 ts2phc[36.972]: /dev/ptp3 offset -8 s2 freq +4442 ts2phc[37.480]: /dev/ptp3 SKIP extts index 0 at 32.449795896 src 32.513320070 ts2phc[37.984]: adding tstamp 32.949791248 to clock /dev/ptp3 ts2phc[37.984]: adding tstamp 33.000000000 to clock /dev/ptp1 ts2phc[37.984]: /dev/ptp3 offset 0 s2 freq +4448 Fix that by taking the following measures: - Schedule the poll from a timer. Because we are really scheduling the timer periodically, the extts events delivered to user space are periodic too, and don't suffer from the "shift-to-the-right" effect. - Increase the poll period to 6 times a second. This imposes a smaller upper bound to the shift that can occur to the delivery time of extts events, and makes user space (ts2phc) to always interpret correctly which events should be skipped and which shouldn't. - Move the SPI readout itself to the main PTP kernel thread, instead of the generic workqueue. This is because the timer runs in atomic context, but is also better than before, because if needed, we can chrt & taskset this kernel thread, to ensure it gets enough priority under load. After this patch, one can notice that the wander is greatly reduced, and that the latencies of one extts poll are not propagated to the next. The 'src' timestamp that is skipped is never larger than .65 seconds (which means .15 seconds larger than the time at which the real event occurred at, and .10 seconds smaller than the .75 upper threshold for ignoring the falling edge): ts2phc[40.076]: adding tstamp 34.949261296 to clock /dev/ptp3 ts2phc[40.076]: adding tstamp 35.000000000 to clock /dev/ptp1 ts2phc[40.076]: /dev/ptp3 offset 48 s2 freq +4631 ts2phc[40.568]: /dev/ptp3 SKIP extts index 0 at 35.449256496 src 35.595791078 ts2phc[41.064]: adding tstamp 35.949251744 to clock /dev/ptp3 ts2phc[41.064]: adding tstamp 36.000000000 to clock /dev/ptp1 ts2phc[41.064]: /dev/ptp3 offset -224 s2 freq +4374 ts2phc[41.552]: /dev/ptp3 SKIP extts index 0 at 36.449247088 src 36.579825574 ts2phc[42.044]: adding tstamp 36.949242456 to clock /dev/ptp3 ts2phc[42.044]: adding tstamp 37.000000000 to clock /dev/ptp1 ts2phc[42.044]: /dev/ptp3 offset -240 s2 freq +4290 ts2phc[42.536]: /dev/ptp3 SKIP extts index 0 at 37.449237848 src 37.563828774 ts2phc[43.028]: adding tstamp 37.949233264 to clock /dev/ptp3 ts2phc[43.028]: adding tstamp 38.000000000 to clock /dev/ptp1 ts2phc[43.028]: /dev/ptp3 offset -144 s2 freq +4314 ts2phc[43.520]: /dev/ptp3 SKIP extts index 0 at 38.449228656 src 38.547823238 ts2phc[44.012]: adding tstamp 38.949224048 to clock /dev/ptp3 ts2phc[44.012]: adding tstamp 39.000000000 to clock /dev/ptp1 ts2phc[44.012]: /dev/ptp3 offset -80 s2 freq +4335 ts2phc[44.508]: /dev/ptp3 SKIP extts index 0 at 39.449219432 src 39.535846118 ts2phc[44.996]: adding tstamp 39.949214816 to clock /dev/ptp3 ts2phc[44.996]: adding tstamp 40.000000000 to clock /dev/ptp1 ts2phc[44.996]: /dev/ptp3 offset -32 s2 freq +4359 ts2phc[45.488]: /dev/ptp3 SKIP extts index 0 at 40.449210192 src 40.515824678 ts2phc[45.980]: adding tstamp 40.949205568 to clock /dev/ptp3 ts2phc[45.980]: adding tstamp 41.000000000 to clock /dev/ptp1 ts2phc[45.980]: /dev/ptp3 offset 8 s2 freq +4390 ts2phc[46.636]: /dev/ptp3 SKIP extts index 0 at 41.449200928 src 41.664176902 ts2phc[47.132]: adding tstamp 41.949196288 to clock /dev/ptp3 ts2phc[47.132]: adding tstamp 42.000000000 to clock /dev/ptp1 ts2phc[47.132]: /dev/ptp3 offset 0 s2 freq +4384 ts2phc[47.620]: /dev/ptp3 SKIP extts index 0 at 42.449191656 src 42.648117190 ts2phc[48.112]: adding tstamp 42.949187016 to clock /dev/ptp3 ts2phc[48.112]: adding tstamp 43.000000000 to clock /dev/ptp1 ts2phc[48.112]: /dev/ptp3 offset 0 s2 freq +4384 ts2phc[48.604]: /dev/ptp3 SKIP extts index 0 at 43.449182384 src 43.632112582 ts2phc[49.100]: adding tstamp 43.949177736 to clock /dev/ptp3 ts2phc[49.100]: adding tstamp 44.000000000 to clock /dev/ptp1 ts2phc[49.100]: /dev/ptp3 offset -8 s2 freq +4376 ts2phc[49.588]: /dev/ptp3 SKIP extts index 0 at 44.449173096 src 44.616136774 ts2phc[50.080]: adding tstamp 44.949168464 to clock /dev/ptp3 ts2phc[50.080]: adding tstamp 45.000000000 to clock /dev/ptp1 ts2phc[50.080]: /dev/ptp3 offset 8 s2 freq +4390 ts2phc[50.572]: /dev/ptp3 SKIP extts index 0 at 45.449163816 src 45.600134662 ts2phc[51.064]: adding tstamp 45.949159160 to clock /dev/ptp3 ts2phc[51.064]: adding tstamp 46.000000000 to clock /dev/ptp1 ts2phc[51.064]: /dev/ptp3 offset -8 s2 freq +4376 ts2phc[51.556]: /dev/ptp3 SKIP extts index 0 at 46.449154528 src 46.584588550 ts2phc[52.048]: adding tstamp 46.949149896 to clock /dev/ptp3 ts2phc[52.048]: adding tstamp 47.000000000 to clock /dev/ptp1 ts2phc[52.048]: /dev/ptp3 offset 0 s2 freq +4382 ts2phc[52.540]: /dev/ptp3 SKIP extts index 0 at 47.449145256 src 47.568132198 ts2phc[53.032]: adding tstamp 47.949140616 to clock /dev/ptp3 ts2phc[53.032]: adding tstamp 48.000000000 to clock /dev/ptp1 ts2phc[53.032]: /dev/ptp3 offset 0 s2 freq +4382 ts2phc[53.524]: /dev/ptp3 SKIP extts index 0 at 48.449135968 src 48.552121446 ts2phc[54.016]: adding tstamp 48.949131320 to clock /dev/ptp3 ts2phc[54.016]: adding tstamp 49.000000000 to clock /dev/ptp1 ts2phc[54.016]: /dev/ptp3 offset 0 s2 freq +4382 ts2phc[54.512]: /dev/ptp3 SKIP extts index 0 at 49.449126680 src 49.540147014 ts2phc[55.000]: adding tstamp 49.949122040 to clock /dev/ptp3 ts2phc[55.000]: adding tstamp 50.000000000 to clock /dev/ptp1 ts2phc[55.000]: /dev/ptp3 offset 0 s2 freq +4382 ts2phc[55.492]: /dev/ptp3 SKIP extts index 0 at 50.449117400 src 50.520119078 ts2phc[55.988]: adding tstamp 50.949112768 to clock /dev/ptp3 ts2phc[55.988]: adding tstamp 51.000000000 to clock /dev/ptp1 ts2phc[55.988]: /dev/ptp3 offset 8 s2 freq +4390 ts2phc[56.476]: /dev/ptp3 SKIP extts index 0 at 51.449108120 src 51.504175910 ts2phc[57.132]: adding tstamp 51.949103480 to clock /dev/ptp3 ts2phc[57.132]: adding tstamp 52.000000000 to clock /dev/ptp1 ts2phc[57.132]: /dev/ptp3 offset 0 s2 freq +4384 ts2phc[57.624]: /dev/ptp3 SKIP extts index 0 at 52.449098840 src 52.651833574 ts2phc[58.116]: adding tstamp 52.949094200 to clock /dev/ptp3 ts2phc[58.116]: adding tstamp 53.000000000 to clock /dev/ptp1 ts2phc[58.116]: /dev/ptp3 offset 8 s2 freq +4392 ts2phc[58.612]: /dev/ptp3 SKIP extts index 0 at 53.449089560 src 53.639826918 ts2phc[59.100]: adding tstamp 53.949084920 to clock /dev/ptp3 ts2phc[59.100]: adding tstamp 54.000000000 to clock /dev/ptp1 ts2phc[59.100]: /dev/ptp3 offset 8 s2 freq +4394 ts2phc[59.592]: /dev/ptp3 SKIP extts index 0 at 54.449080272 src 54.619842278 ts2phc[60.084]: adding tstamp 54.949075624 to clock /dev/ptp3 ts2phc[60.084]: adding tstamp 55.000000000 to clock /dev/ptp1 ts2phc[60.084]: /dev/ptp3 offset 8 s2 freq +4397 ts2phc[60.576]: /dev/ptp3 SKIP extts index 0 at 55.449070968 src 55.603885542 ts2phc[61.068]: adding tstamp 55.949066312 to clock /dev/ptp3 ts2phc[61.068]: adding tstamp 56.000000000 to clock /dev/ptp1 ts2phc[61.068]: /dev/ptp3 offset 0 s2 freq +4391 ts2phc[61.560]: /dev/ptp3 SKIP extts index 0 at 56.449061680 src 56.587885798 ts2phc[62.052]: adding tstamp 56.949057032 to clock /dev/ptp3 ts2phc[62.052]: adding tstamp 57.000000000 to clock /dev/ptp1 ts2phc[62.052]: /dev/ptp3 offset -8 s2 freq +4383 Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
In case of memory pressure, mptcp_sendmsg() may call sk_stream_wait_memory() after succesfully xmitting some bytes. If the latter fails we currently return to the user-space the error code, ignoring the succeful xmit. Address the issue always checking for the xmitted bytes before mptcp_sendmsg() completes. Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Add support for buffer drop traps Petr says: A recent patch set added the ability to mirror buffer related drops (e.g., early drops) through a netdev. This patch set adds the ability to trap such packets to the local CPU for analysis. The trapping towards the CPU is configured by using tc-trap action instead of tc-mirred as was done when the packets were mirrored through a netdev. A future patch set will also add the ability to sample the dropped packets using tc-sample action. The buffer related drop traps are added to devlink, which means that the dropped packets can be reported to user space via the kernel's drop_monitor module. Patch set overview: Patch #1 adds the early_drop trap to devlink Patch #2 adds extack to a few devlink operations to facilitate better error reporting to user space. This is necessary - among other things - because the action of buffer drop traps cannot be changed in mlxsw Patch #3 performs a small refactoring in mlxsw, patch #4 fixes a bug that this patchset would trigger. Patches #5-#6 add the infrastructure required to support different traps / trap groups in mlxsw per-ASIC. This is required because buffer drop traps are not supported by Spectrum-1 Patch #7 extends mlxsw to register the early_drop trap Patch #8 adds the offload logic for the "trap" action at a qevent block. Patch #9 adds a mlxsw-specific selftest. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Add a selftest for RED early_drop and mark qevents when a trap action is attached at the associated block. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
When offloading action trap on a qevent, pass to_dev of NULL to the SPAN module to trigger the mirror to the CPU port. Query the buffer drops policer and use it for policing of the trapped traffic. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
As previously explained, packets that are dropped due to buffer related reasons (e.g., tail drop, early drop) can be mirrored to the CPU port. These packets are then trapped with one of the "mirror session" traps and their CQE includes the reason for which the packet was mirrored. Register with devlink a new trap, early_drop, and initialize the corresponding Rx listener with the appropriate mirror reason. Return an error in case user tries to change the traps' action, as this is not supported. Since Spectrum-1 does not support these traps, the above is only done for Spectrum-2 onwards. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Subsequent patches will need to register different traps for Spectrum-1 and Spectrum-2 onwards. Enable that by invoking a per-ASIC operation during traps initialization. Reviewed-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Subsequent patches will need to register different trap groups for Spectrum-1 and Spectrum-2 onwards. Enable that by invoking a per-ASIC operation during trap groups initialization. Reviewed-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
When unsetting policer base, the SPAN code currently uses refcount_dec(). However that function splats when the counter reaches zero, because reaching zero without actually testing is in general indicative of a missing cleanup. There is no cleanup to be done here, but nonetheless, use refcount_dec_and_test() as required. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Use 'size_t' instead of 'u64' for array sizes, as this this is correct type to use for expressions involving sizeof(). Suggested-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
A later patch will refuse to set the action of certain traps in mlxsw and also to change the policer binding of certain groups. Pass extack so that failure could be communicated clearly to user space. Reviewed-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amit Cohen authored
Add the packet trap that can report packets that were ECN marked due to RED AQM. Signed-off-by:
Amit Cohen <amitc@mellanox.com> Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YueHaibing authored
net/core/fib_rules.c:26:7: warning: "CONFIG_IP_MULTIPLE_TABLES" is not defined, evaluates to 0 [-Wundef] #elif CONFIG_IP_MULTIPLE_TABLES ^~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 8b66a6fd ("fib: fix another fib_rules_ops indirect call wrapper problem") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-By:
Brian Vazquez <brianvv@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
Use mptcp_for_each_subflow in mptcp_stream_accept instead of open-coding. Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== A few more changes, notably: * handle new SAE (WPA3 authentication) status codes in the correct way * fix a while that should be an if instead, avoiding infinite loops * handle beacon filtering changing better ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jisheng Zhang authored
With the latest net-next tree, if test suspend/resume after enabling WOL, we get error as below: [ 487.086365] dpm_run_callback(): mdio_bus_suspend+0x0/0x30 returns -16 [ 487.086375] PM: Device stmmac-0:00 failed to suspend: error -16 -16 means -EBUSY, this is because I didn't enable wakeup of the correct device when implementing phy based WOL feature. To be honest, I caught the issue when implementing phy based WOL and then fix it locally, but forgot to amend the phy based wol patch. Today, I found the issue by testing net-next tree. Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana-Ruxandra Stăncioi authored
Refactor the function seg6_lwt_headroom out of the seg6_iptunnel.h uapi header, because it is only used in seg6_iptunnel.c. Moreover, it is only used in the kernel code, as indicated by the "#ifdef __KERNEL__". Suggested-by:
David Miller <davem@davemloft.net> Signed-off-by:
Ioana-Ruxandra Stăncioi <stancioi@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jianfeng Wang authored
For retransmitted packets, TCP needs to resort to using TCP timestamps for computing RTT samples. In the common case where the data and ACK fall in the same 1-millisecond interval, TCP senders with millisecond- granularity TCP timestamps compute a ca_rtt_us of 0. This ca_rtt_us of 0 propagates to rs->rtt_us. This value of 0 can cause performance problems for congestion control modules. For example, in BBR, the zero min_rtt sample can bring the min_rtt and BDP estimate down to 0, reduce snd_cwnd and result in a low throughput. It would be hard to mitigate this with filtering in the congestion control module, because the proper floor to apply would depend on the method of RTT sampling (using timestamp options or internally-saved transmission timestamps). This fix applies a floor of 1 for the RTT sample delta from TCP timestamps, so that seq_rtt_us, ca_rtt_us, and rs->rtt_us will be at least 1 * (USEC_PER_SEC / TCP_TS_HZ). Note that the receiver RTT computation in tcp_rcv_rtt_measure() and min_rtt computation in tcp_update_rtt_min() both already apply a floor of 1 timestamp tick, so this commit makes the code more consistent in avoiding this edge case of a value of 0. Signed-off-by:
Jianfeng Wang <jfwang@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Kevin Yang <yyd@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 03 Aug, 2020 12 commits
-
-
Huang Guobin authored
Using is_broadcast_ether_addr() instead of directly use memcmp() to determine if the ethernet address is broadcast address. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by:
Huang Guobin <huangguobin4@huawei.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florinel Iordache says: ==================== DPAA FMan driver fixes Here are several fixes for the DPAA FMan driver. v2 changes: * corrected patch 4 by removing the line added by mistake * used longer fixes tags with the first 12 characters of the SHA-1 ID v3 changes: * remove the empty line inserted after fixes tag ==================== Acked-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florinel Iordache authored
Fix memory allocation for ethernet address hash table. The code was wrongly allocating an array for eth hash table which is incorrect because this is the main structure for eth hash table (struct eth_hash_t) that contains inside a number of elements. Fixes: 57ba4c9b ("fsl/fman: Add FMan MAC support") Signed-off-by:
Florinel Iordache <florinel.iordache@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florinel Iordache authored
Add a safe check to avoid dereferencing null pointer Fixes: 57ba4c9b ("fsl/fman: Add FMan MAC support") Signed-off-by:
Florinel Iordache <florinel.iordache@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florinel Iordache authored
The parameter 'priority' is incorrectly forced to zero which ultimately induces logically dead code in the subsequent lines. Fixes: 57ba4c9b ("fsl/fman: Add FMan MAC support") Signed-off-by:
Florinel Iordache <florinel.iordache@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florinel Iordache authored
Check before using returned value to avoid dereferencing null pointer. Fixes: 18a6c85f ("fsl/fman: Add FMan Port Support") Signed-off-by:
Florinel Iordache <florinel.iordache@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florinel Iordache authored
Potentially overflowing expression (ts_freq << 16 and intgr << 16) declared as type u32 (32-bit unsigned) is evaluated using 32-bit arithmetic and then used in a context that expects an expression of type u64 (64-bit unsigned) which ultimately is used as 16-bit unsigned by typecasting to u16. Fixed by using an unsigned 32-bit integer since the value is truncated anyway in the end. Fixes: 414fd46e ("fsl/fman: Add FMan support") Signed-off-by:
Florinel Iordache <florinel.iordache@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next 1) UAF in chain binding support from previous batch, from Dan Carpenter. 2) Queue up delayed work to expire connections with no destination, from Andrew Sy Kim. 3) Use fallthrough pseudo-keyword, from Gustavo A. R. Silva. 4) Replace HTTP links with HTTPS, from Alexander A. Klimov. 5) Remove superfluous null header checks in ip6tables, from Gaurav Singh. 6) Add extended netlink error reporting for expression. 7) Report EEXIST on overlapping chain, set elements and flowtable devices. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
Avoid a memset after a call to 'dma_alloc_coherent()'. This is useless since commit 518a2f19 ("dma-mapping: zero memory returned from dma_alloc_*") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()', in 'spider_net_init_chain()'. Fixes: d4ed8f8d ("Spidernet DMA coalescing") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()'. Fixes: 369a782a ("net: sgi: ioc3-eth: ensure tx ring is 16k aligned.") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tianjia Zhang authored
On an error exit path, a negative error code should be returned instead of a positive return value. Fixes: 0c45d7fe ("liquidio: fix use of pf in pass-through mode in a virtual machine") Cc: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-