- 23 May, 2011 17 commits
-
-
Youquan Song authored
commit e503f9e4 upstream. This patch fixes a bug reported by a customer, who found that many unreasonable error interrupts reported on all non-boot CPUs (APs) during the system boot stage. According to Chapter 10 of Intel Software Developer Manual Volume 3A, Local APIC may signal an illegal vector error when an LVT entry is set as an illegal vector value (0~15) under FIXED delivery mode (bits 8-11 is 0), regardless of whether the mask bit is set or an interrupt actually happen. These errors are seen as error interrupts. The initial value of thermal LVT entries on all APs always reads 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI sequence to them and LVT registers are reset to 0s except for the mask bits which are set to 1s when APs receive INIT IPI. When the BIOS takes over the thermal throttling interrupt, the LVT thermal deliver mode should be SMI and it is required from the kernel to keep AP's LVT thermal monitoring register programmed as such as well. This issue happens when BIOS does not take over thermal throttling interrupt, AP's LVT thermal monitor register will be restored to 0x10000 which means vector 0 and fixed deliver mode, so all APs will signal illegal vector error interrupts. This patch check if interrupt delivery mode is not fixed mode before restoring AP's LVT thermal monitor register. Signed-off-by:
Youquan Song <youquan.song@intel.com> Acked-by:
Suresh Siddha <suresh.b.siddha@intel.com> Acked-by:
Yong Wang <yong.y.wang@intel.com> Cc: hpa@linux.intel.com Cc: joe@perches.com Cc: jbaron@redhat.com Cc: trenn@suse.de Cc: kent.liu@intel.com Cc: chaohong.guo@intel.com Link: http://lkml.kernel.org/r/1303402963-17738-1-git-send-email-youquan.song@intel.comSigned-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Thomas Gleixner authored
commit 07f4beb0 upstream. The first cpu which switches from periodic to oneshot mode switches also the broadcast device into oneshot mode. The broadcast device serves as a backup for per cpu timers which stop in deeper C-states. To avoid starvation of the cpus which might be in idle and depend on broadcast mode it marks the other cpus as broadcast active and sets the brodcast expiry value of those cpus to the next tick. The oneshot mode broadcast bit for the other cpus is sticky and gets only cleared when those cpus exit idle. If a cpu was not idle while the bit got set in consequence the bit prevents that the broadcast device is armed on behalf of that cpu when it enters idle for the first time after it switched to oneshot mode. In most cases that goes unnoticed as one of the other cpus has usually a timer pending which keeps the broadcast device armed with a short timeout. Now if the only cpu which has a short timer active has the bit set then the broadcast device will not be armed on behalf of that cpu and will fire way after the expected timer expiry. In the case of Christians bug report it took ~145 seconds which is about half of the wrap around time of HPET (the limit for that device) due to the fact that all other cpus had no timers armed which expired before the 145 seconds timeframe. The solution is simply to clear the broadcast active bit unconditionally when a cpu switches to oneshot mode after the first cpu switched the broadcast device over. It's not idle at that point otherwise it would not be executing that code. [ I fundamentally hate that broadcast crap. Why the heck thought some folks that when going into deep idle it's a brilliant concept to switch off the last device which brings the cpu back from that state? ] Thanks to Christian for providing all the valuable debug information! Reported-and-tested-by:
Christian Hoffmann <email@christianhoffmann.info> Cc: John Stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/%3Calpine.LFD.2.02.1105161105170.3078%40ionos%3ESigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
john stultz authored
commit e05b2efb upstream. Christian Hoffmann reported that the command line clocksource override with acpi_pm timer fails: Kernel command line: <SNIP> clocksource=acpi_pm hpet clockevent registered Switching to clocksource hpet Override clocksource acpi_pm is not HRT compatible. Cannot switch while in HRT/NOHZ mode. The watchdog code is what enables CLOCK_SOURCE_VALID_FOR_HRES, but we actually end up selecting the clocksource before we enqueue it into the watchdog list, so that's why we see the warning and fail to switch to acpi_pm timer as requested. That's particularly bad when we want to debug timekeeping related problems in early boot. Put the selection call last. Reported-by:
John Stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/%3C1304558210.2943.24.camel%40work-vm%3ESigned-off-by:
-
Borislav Petkov authored
commit 14fb57dc upstream. Trying to enable the local APIC timer on early K8 revisions uncovers a number of other issues with it, in conjunction with the C1E enter path on AMD. Fixing those causes much more churn and troubles than the benefit of using that timer brings so don't enable it on K8 at all, falling back to the original functionality the kernel had wrt to that. Reported-and-bisected-by:
Nick Bowler <nbowler@elliptictech.com> Cc: Boris Ostrovsky <Boris.Ostrovsky@amd.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Nick Bowler <nbowler@elliptictech.com> Cc: Joerg-Volker-Peetz <jvpeetz@web.de> Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com> Link: http://lkml.kernel.org/r/1305636919-31165-3-git-send-email-bp@amd64.orgSigned-off-by:
-
Borislav Petkov authored
commit 328935e6 upstream. This reverts commit e20a2d20, as it crashes certain boxes with specific AMD CPU models. Moving the lower endpoint of the Erratum 400 check to accomodate earlier K8 revisions (A-E) opens a can of worms which is simply not worth to fix properly by tweaking the errata checking framework: * missing IntPenging MSR on revisions < CG cause #GP: http://marc.info/?l=linux-kernel&m=130541471818831 * makes earlier revisions use the LAPIC timer instead of the C1E idle routine which switches to HPET, thus not waking up in deeper C-states: http://lkml.org/lkml/2011/4/24/20 Therefore, leave the original boundary starting with K8-revF. Signed-off-by:
-
Jeff Layton authored
commit 221d1d79 upstream. The is_path_accessible check uses a QPathInfo call, which isn't supported by ancient win9x era servers. Fall back to an older SMBQueryInfo call if it fails with the magic error codes. Reported-and-Tested-by:
Sandro Bonazzola <sandro.bonazzola@gmail.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <sfrench@us.ibm.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit cf7e032f upstream. Changeset b6114794 ("zorro8390: convert to net_device_ops") broke zorro8390 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in zorro8390.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa8 ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa ("mac8390: fix build with NET_POLL_CONTROLLER"). Reported-by:
Christian T. Steigies <cts@debian.org> Suggested-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Paul Fox authored
commit 2ae1b8b3 upstream. We occasionally see list corruption using libertas. While we haven't been able to diagnose this precisely, we have spotted a possible cause: cmdpendingq is generally modified with driver_lock held. However, there are a couple of points where this is not the case. Fix up those operations to execute under the lock, it seems like the correct thing to do and will hopefully improve the situation. Signed-off-by:
Paul Fox <pgf@laptop.org> Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 0b25e015 upstream. Changeset 5618f0d1 ("hydra: convert to net_device_ops") broke hydra by adding 8390.o to the link. That meant that lib8390.c was included twice, once in hydra.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa8 ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa ("mac8390: fix build with NET_POLL_CONTROLLER"). Signed-off-by:
-
Geert Uytterhoeven authored
commit 2592a735 upstream. Changeset dcd39c90 ("ne-h8300: convert to net_device_ops") broke ne-h8300 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in ne-h8300.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa8 ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa ("mac8390: fix build with NET_POLL_CONTROLLER"). Signed-off-by:
-
Matvejchikov Ilya authored
commit 057bef93 upstream. TTY layer expects 0 if the ldisc->open operation succeeded. Signed-off-by : Matvejchikov Ilya <matvejchikov@gmail.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Kleber Sacilotto de Souza authored
commit dcbe14b9 upstream. Currently EHEA reports to ethtool as supporting 10M, 100M, 1G and 10G and connected to FIBRE independent of the hardware configuration. However, when connected to FIBRE the only supported speed is 10G full-duplex, and the other speeds and modes are only supported when connected to twisted pair. Signed-off-by:
Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Acked-by:
Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by:
-
john stultz authored
Currently with 2.6.32-longterm, its possible for time() to occasionally return values one second earlier then the previous time() call. This happens because update_xtime_cache() does: xtime_cache = xtime; timespec_add_ns(&xtime_cache, nsec); Its possible that xtime is 1sec,999msecs, and nsecs is 1ms, resulting in a xtime_cache that is 2sec,0ms. get_seconds() (which is used by sys_time()) does not take the xtime_lock, which is ok as the xtime.tv_sec value is a long and can be atomically read safely. The problem occurs the next call to update_xtime_cache() if xtime has not increased: /* This sets xtime_cache back to 1sec, 999msec */ xtime_cache = xtime; /* get_seconds, calls here, and sees a 1second inconsistency */ timespec_add_ns(&xtime_cache, nsec); In order to resolve this, we could add locking to get_seconds(), but it needs to be lock free, as it is called from the machine check handler, opening a possible deadlock. So instead, this patch introduces an intermediate value for the calculations, so that we only assign xtime_cache once with the correct time, using ACCESS_ONCE to make sure the compiler doesn't optimize out any intermediate values. The xtime_cache manipulations were removed with 2.6.35, so that kernel and later do not need this change. In 2.6.33 and 2.6.34 the logarithmic accumulation should make it so xtime is updated each tick, so it is unlikely that two updates to xtime_cache could occur while the difference between xtime and xtime_cache crosses the second boundary. However, the paranoid might want to pull this into 2.6.33/34-longterm just to be sure. Thanks to Stephen for helping finally narrow down the root cause and many hours of help with testing and validation. Also thanks to Max, Andi, Eric and Paul for review of earlier attempts and helping clarify what is possible with regard to out of order execution. Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 4906e50b upstream. While password processing we can get out of options array bound if the next character after array is delimiter. The patch adds a check if we reach the end. Signed-off-by:
Pavel Shilovsky <piastry@etersoft.ru> Reviewed-by:
-
Dan Rosenberg authored
commit a2948659 upstream. A length of zero (after subtracting two for the type and len fields) for the DCCPO_{CHANGE,CONFIRM}_{L,R} options will cause an underflow due to the subtraction. The subsequent code may read past the end of the options value buffer when parsing. I'm unsure of what the consequences of this might be, but it's probably not good. Signed-off-by:
Dan Rosenberg <drosenberg@vsecurity.com> Acked-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
Timo Warns authored
commit fa039d5f upstream. Otherwise corrupted EFI partition tables can cause total confusion. Signed-off-by:
Timo Warns <warns@pre-sense.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jeff Layton authored
commit fcda7f45 upstream. It's possible that when we go to decode the string area in the SESSION_SETUP response, that bytes_remaining will be 0. Decrementing it at that point will mean that it can go "negative" and wrap. Check for a bytes_remaining value of 0, and don't try to decode the string area if that's the case. Reported-and-Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
- 09 May, 2011 23 commits
-
-
Greg Kroah-Hartman authored
-
James Bottomley authored
commit c055f5b2 upstream. The recent commit closing the race window in device teardown: commit 86cbfb56 Author: James Bottomley <James.Bottomley@suse.de> Date: Fri Apr 22 10:39:59 2011 -0500 [SCSI] put stricter guards on queue dead checks is causing a potential NULL deref in scsi_run_queue() because the q->queuedata may already be NULL by the time this function is called. Since we shouldn't be running a queue that is being torn down, simply add a NULL check in scsi_run_queue() to forestall this. Tested-by:
Jim Schutt <jaschut@sandia.gov> Signed-off-by:
James Bottomley <James.Bottomley@suse.de> Signed-off-by:
-
Oliver Hartkopp authored
commit 10022a6c upstream. v2: added space after 'if' according code style. We can get here with a NULL socket argument passed from userspace, so we need to handle it accordingly. Thanks to Dave Jones pointing at this issue in net/can/bcm.c Signed-off-by:
-
Zachary Amsden authored
(backported from commit 28e4639a) If preempted after kvmclock values are updated, but before hardware virtualization is entered, the last tsc time as read by the guest is never set. It underflows the next time kvmclock is updated if there has not yet been a successful entry / exit into hardware virt. Fix this by simply setting last_tsc to the newly read tsc value so that any computed nsec advance of kvmclock is nulled. Signed-off-by:
Zachary Amsden <zamsden@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> BugLink: http://bugs.launchpad.net/bugs/714335Signed-off-by:
Serge E. Hallyn <serge.hallyn@canonical.com> Reviewed-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Zachary Amsden authored
(backported from commit 1d5f066e) Kernel time, which advances in discrete steps may progress much slower than TSC. As a result, when kvmclock is adjusted to a new base, the apparent time to the guest, which runs at a much higher, nsec scaled rate based on the current TSC, may have already been observed to have a larger value (kernel_ns + scaled tsc) than the value to which we are setting it (kernel_ns + 0). We must instead compute the clock as potentially observed by the guest for kernel_ns to make sure it does not go backwards. Signed-off-by:
-
Zachary Amsden authored
(cherry-picked from commit 347bb444) The scale_delta function for shift / multiply with 31-bit precision moves to a common header so it can be used by both kernel and kvm module. Signed-off-by:
-
Stanislaw Gruszka authored
commit b2502698 upstream. Since commit a120e912 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Fri Feb 19 15:47:33 2010 -0800 iwlwifi: sanity check before counting number of tfds can be free we use skb->data after calling ieee80211_tx_status_irqsafe(), which could free skb instantly. On current kernels I do not observe practical problems related with bug, but on 2.6.35.y it cause random system hangs when stressing wireless link. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Felipe Balbi authored
commit ec95d35a upstream. MUSB is a non-standard host implementation which can handle all speeds with the same core. We need to set has_tt flag after commit d199c96d (USB: prevent buggy hubs from crashing the USB stack) in order for MUSB HCD to continue working. Signed-off-by:
Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Tested-by:
Michael Jones <michael.jones@matrix-vision.de> Tested-by:
Alexander Holler <holler@ahsoftware.de> Signed-off-by:
-
Tejun Heo authored
commit 729a6a30 upstream. ata_pio_sectors() expects buffer for each sector to be contained in a single page; otherwise, it ends up overrunning the first page. This is achieved by setting queue DMA alignment. If sector_size is smaller than PAGE_SIZE and all buffers are sector_size aligned, buffer for each sector is always contained in a single page. This wasn't applied to ATAPI devices but IDENTIFY_PACKET is executed as ATA_PROT_PIO and thus uses ata_pio_sectors(). Newer versions of udev issue IDENTIFY_PACKET with unaligned buffer triggering the problem and causing oops. This patch fixes the problem by setting sdev->sector_size to ATA_SECT_SIZE on ATATPI devices and always setting DMA alignment to sector_size. While at it, add a warning for the unlikely but still possible scenario where sector_size is larger than PAGE_SIZE, in which case the alignment wouldn't be enough. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
John Stanley <jpsinthemix@verizon.net> Tested-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
Jonathan Liu <net147@gmail.com> Signed-off-by:
-
Guennadi Liakhovetski authored
commit e476a5a4 upstream. Fix unbalanced call to sdio_release_host() on the error path. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Ben Hutchings authored
commit 46814e08 upstream. My conversion of tehuti to use request_firmware() was confused about the filename of the firmware blob. Change the driver to match the blob. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Bart Hartgers authored
commit a55ab496 upstream. When writing a disc on certain lite-on dvd-writers (also rebadged as optiarc/LG/...) connected to a vt6420, the ATAPI CDB ends up in the datastream and on the disc, causing silent corruption. Delaying between sending the CDB and starting DMA seems to prevent this. I do not know if there are burners that do not suffer from this, but the patch should be safe for those as well. There are many reports of this issue, but AFAICT no solution was found before. For example: http://lkml.indiana.edu/hypermail/linux/kernel/0802.3/0561.htmlSigned-off-by:
Bart Hartgers <bart.hartgers@gmail.com> Signed-off-by:
-
Ondrej Zary authored
commit 75f64dd5 upstream. HW crypto in rt2500usb does not seem to support keys with different ciphers, which breaks TKIP+AES mode. Fall back to software encryption to fix it. This should fix long-standing problems with rt2500usb and WPA, such as: http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=4&t=4834 https://bugzilla.redhat.com/show_bug.cgi?id=484888 Also tested that it does not break WEP, TKIP-only and AES-only modes. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Ben Hutchings authored
commit 4d9ef89d upstream. The dts-installed variable is initialised using a wildcard path that will be expanded relative to the build directory. Use the existing variable dtstree to generate an absolute wildcard path that will work when building in a separate directory. Reported-by:
Gerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Rémi Denis-Courmont authored
[bwh: This is only applicable to 2.6.32. Phonet was fixed upstream to work with multiple net namespaces.] This should really fix the OOPS when doing: unshare(CLONE_NEWNET); exit(0); while the phonet module is loaded. Signed-off-by:
Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by:
-
Ben Hutchings authored
commit ee9c5cfa upstream. niu_get_ethtool_tcam_all() assumes that its output buffer is the right size, and warns before returning if it is not. However, the output buffer size is under user control and ETHTOOL_GRXCLSRLALL is an unprivileged ethtool command. Therefore this is at least a local denial-of-service vulnerability. Change it to check before writing each entry and to return an error if the buffer is already full. Compile-tested only. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
FUJITA Tomonori authored
commit bb789d01 upstream. scsi_dma_map() returns -1 if an error occurred (zero means that the command has no data). So the following current code can't catch an error: sges_left = scsi_dma_map(scmd); if (!sges_left) { sdev_printk(KERN_ERR, scmd->device, "pci_map_sg" " failed: request for %d bytes!\n", scsi_bufflen(scmd)); return -ENOMEM; } Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
"Kashyap Desai" <Kashyap.Desai@lsi.com> Signed-off-by:
-
Ralf Baechle authored
commit 3b9c6c11 upstream. This only matters for ISA devices with a 24-bit DMA limit or for devices with a 32-bit DMA limit on systems with ZONE_DMA32 enabled. The latter currently only affects 32-bit PCI cards on Sibyte-based systems with more than 1GB RAM installed. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
James Chapman authored
commit c3259c8a upstream. This patch fixes UDP socket refcnt bugs in the pppol2tp driver. A bug can cause a kernel stack trace when a tunnel socket is closed. A way to reproduce the issue is to prepare the UDP socket for L2TP (by opening a tunnel pppol2tp socket) and then close it before any L2TP sessions are added to it. The sequence is Create UDP socket Create tunnel pppol2tp socket to prepare UDP socket for L2TP pppol2tp_connect: session_id=0, peer_session_id=0 L2TP SCCRP control frame received (tunnel_id==0) pppol2tp_recv_core: sock_hold() pppol2tp_recv_core: sock_put L2TP ZLB control frame received (tunnel_id=nnn) pppol2tp_recv_core: sock_hold() pppol2tp_recv_core: sock_put Close tunnel management socket pppol2tp_release: session_id=0, peer_session_id=0 Close UDP socket udp_lib_close: BUG The addition of sock_hold() in pppol2tp_connect() solves the problem. For data frames, two sock_put() calls were added to plug a refcnt leak per received data frame. The ref that is grabbed at the top of pppol2tp_recv_core() must always be released, but this wasn't done for accepted data frames or data frames discarded because of bad UDP checksums. This leak meant that any UDP socket that had passed L2TP data traffic (i.e. L2TP data frames, not just L2TP control frames) using pppol2tp would not be released by the kernel. WARNING: at include/net/sock.h:435 udp_lib_unhash+0x117/0x120() Pid: 1086, comm: openl2tpd Not tainted 2.6.33-rc1 #8 Call Trace: [<c119e9b7>] ? udp_lib_unhash+0x117/0x120 [<c101b871>] ? warn_slowpath_common+0x71/0xd0 [<c119e9b7>] ? udp_lib_unhash+0x117/0x120 [<c101b8e3>] ? warn_slowpath_null+0x13/0x20 [<c119e9b7>] ? udp_lib_unhash+0x117/0x120 [<c11598a7>] ? sk_common_release+0x17/0x90 [<c11a5e33>] ? inet_release+0x33/0x60 [<c11577b0>] ? sock_release+0x10/0x60 [<c115780f>] ? sock_close+0xf/0x30 [<c106e542>] ? __fput+0x52/0x150 [<c106b68e>] ? filp_close+0x3e/0x70 [<c101d2e2>] ? put_files_struct+0x62/0xb0 [<c101eaf7>] ? do_exit+0x5e7/0x650 [<c1081623>] ? mntput_no_expire+0x13/0x70 [<c106b68e>] ? filp_close+0x3e/0x70 [<c101eb8a>] ? do_group_exit+0x2a/0x70 [<c101ebe1>] ? sys_exit_group+0x11/0x20 [<c10029b0>] ? sysenter_do_call+0x12/0x26 Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Romain Francoise authored
commit 2fdc1c80 upstream. When a network namespace is created (via CLONE_NEWNET), the loopback interface is automatically added to the new namespace, triggering a printk in ipv6_add_dev() if CONFIG_IPV6_PRIVACY is set. This is problematic for applications which use CLONE_NEWNET as part of a sandbox, like Chromium's suid sandbox or recent versions of vsftpd. On a busy machine, it can lead to thousands of useless "lo: Disabled Privacy Extensions" messages appearing in dmesg. It's easy enough to check the status of privacy extensions via the use_tempaddr sysctl, so just removing the printk seems like the most sensible solution. Signed-off-by:
Romain Francoise <romain@orebokech.com> Signed-off-by:
-
Jeff Mahoney authored
commit 25cca535 upstream. This patch removes D-Link DGE-550T PCI ID (1186:4000) from the ipg driver. The ipg driver is for IP2000-based cards and the DGE-550T is a DL2000-based card. The driver loads and works for a few moments, but once a real workload is applied it stops operating. The ipg driver claimed this ID since it was introduced in 2.6.24 and it's forced many users to blacklist it. The correct driver for this hardware is the dl2k driver, which has been claiming this PCI ID since the 2.4 days. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
David Woodhouse authored
commit 2d9e667e upstream. Certain revisions of this chipset appear to be broken. There is a shadow GTT which mirrors the real GTT but contains pre-translated physical addresses, for performance reasons. When a GTT update happens, the translations are done once and the resulting physical addresses written back to the shadow GTT. Except sometimes, the physical address is actually written back to the _real_ GTT, not the shadow GTT. Thus we start to see faults when that physical address is fed through translation again. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Edgar (gimli) Hucek authored
commit 99b9f758 upstream. This patch add support for the MacBookAir3,1 and MacBookAir3,2 to the hid driver. Signed-off-by:
Edgar (gimli) Hucek <gimli@dark-green.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
