- 25 Mar, 2022 20 commits
-
-
Jiajian Ye authored
When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cnSigned-off-by:
Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jiajian Ye authored
When viewing page owner information, we may also need to the block to be sorted by task command name. Therefore, the following adjustments are made: 1. Add a member variable to record task command name of block. 2. Add a new -n option to sort the information of blocks by task command name. 3. Add -n option explanation in the document. Link: https://lkml.kernel.org/r/20220306030640.43054-2-yejiajian2018@email.szu.edu.cnSigned-off-by:
-
Jiajian Ye authored
The following adjustments are made: 1. Instead of using another array to cull the blocks after sorting, reuse the old array. So there is no need to malloc a new array. 2. When enabling '-f' option to filter out the blocks which have been released, only add those have not been released in the list, rather than add all of blocks in the list and then do the filtering when printing the result. 3. When enabling '-c' option to cull the blocks by comparing stacktrace, print the stacetrace rather than the total block. Link: https://lkml.kernel.org/r/20220306030640.43054-1-yejiajian2018@email.szu.edu.cnSigned-off-by:
-
Jiajian Ye authored
When the "page owner" information is read, the information sorted by TGID is expected. As a result, the following adjustments have been made: 1. Add a new -P option to sort the information of blocks by TGID in ascending order. 2. Adjust the order of member variables in block_list strust to avoid one 4 byte hole. 3. Add -P option explanation in the document. Link: https://lkml.kernel.org/r/20220301151438.166118-3-yejiajian2018@email.szu.edu.cnSigned-off-by:
-
Jiajian Ye authored
Add a security check after using malloc() to allocate memory. Link: https://lkml.kernel.org/r/20220301151438.166118-2-yejiajian2018@email.szu.edu.cnSigned-off-by:
-
Jiajian Ye authored
Two adjustments are made: 1. Correct a grammatical error: replace the "what" in "Do the job what you want to debug" with "that". 2. Replace "has not been" with "has been" in the description of the -f option: According to Commit b1c9ba071e7d ("tools/vm/page_owner_sort.c: fix the instructions for use"), the description of the "-f" option is "Filter out the information of blocks whose memory has been released." Link: https://lkml.kernel.org/r/20220301151438.166118-1-yejiajian2018@email.szu.edu.cnSigned-off-by: -
Yixuan Cao authored
I noticed a discrepancy between the usage method and the code logic. If we enable the -f option, it should be "Filter out the information of blocks whose memory has been released". Link: https://lkml.kernel.org/r/20220219143106.2805-1-caoyixuan2019@email.szu.edu.cnSigned-off-by:
Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Signed-off-by:
-
Yixuan Cao authored
In a single-threaded process, the pid in kernel task_struct is the same as the tgid, which can mark the process of page allocation. But in a multithreaded process, only the task_struct of the thread leader has the same pid as tgid, and the pids of other threads are different from tgid. Therefore, tgid is recorded to provide effective information for debugging and data statistics of multithreaded programs. This can also be achieved by observing the task name (executable file name) for a specific process. However, when the same program is started multiple times, the task name is the same and the tgid is different. Therefore, in the debugging of multi-threaded programs, combined with the task name and tgid, more accurate runtime information of a certain run of the program can be obtained. Link: https://lkml.kernel.org/r/20220219180450.2399-1-caoyixuan2019@email.szu.edu.cnSigned-off-by:
-
Waiman Long authored
The page_owner information currently includes the pid of the calling task. That is useful as long as the task is still running. Otherwise, the number is meaningless. To have more information about the allocating tasks that had exited by the time the page_owner information is retrieved, we need to store the command name of the task. Add a new comm field into page_owner structure to store the command name and display it when the page_owner information is retrieved. Link: https://lkml.kernel.org/r/20220202203036.744010-5-longman@redhat.comSigned-off-by:
Waiman Long <longman@redhat.com> Acked-by:
Rafael Aquini <aquini@redhat.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by:
-
Waiman Long authored
It was found that a number of offline memcgs were not freed because they were pinned by some charged pages that were present. Even "echo 1 > /proc/sys/vm/drop_caches" wasn't able to free those pages. These offline but not freed memcgs tend to increase in number over time with the side effect that percpu memory consumption as shown in /proc/meminfo also increases over time. In order to find out more information about those pages that pin offline memcgs, the page_owner feature is extended to print memory cgroup information especially whether the cgroup is offline or not. RCU read lock is taken when memcg is being accessed to make sure that it won't be freed. Link: https://lkml.kernel.org/r/20220202203036.744010-4-longman@redhat.comSigned-off-by:
David Rientjes <rientjes@google.com> Acked-by:
Roman Gushchin <guro@fb.com> Acked-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by:
-
Waiman Long authored
The snprintf() function can return a length greater than the given input size. That will require a check for buffer overrun after each invocation of snprintf(). scnprintf(), on the other hand, will never return a greater length. By using scnprintf() in selected places, we can avoid some buffer overrun checks except after stack_depot_snprint() and after the last snprintf(). Link: https://lkml.kernel.org/r/20220202203036.744010-3-longman@redhat.comSigned-off-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by:
-
Waiman Long authored
Patch series "mm/page_owner: Extend page_owner to show memcg information", v4. While debugging the constant increase in percpu memory consumption on a system that spawned large number of containers, it was found that a lot of offline mem_cgroup structures remained in place without being freed. Further investigation indicated that those mem_cgroup structures were pinned by some pages. In order to find out what those pages are, the existing page_owner debugging tool is extended to show memory cgroup information and whether those memcgs are offline or not. With the enhanced page_owner tool, the following is a typical page that pinned the mem_cgroup structure in my test case: Page allocated via order 0, mask 0x1100cca(GFP_HIGHUSER_MOVABLE), pid 162970 (podman), ts 1097761405537 ns, free_ts 1097760838089 ns PFN 1925700 type Movable Block 3761 type Movable Flags 0x17ffffc00c001c(uptodate|dirty|lru|reclaim|swapbacked|node=0|zone=2|lastcpupid=0x1fffff) prep_new_page+0xac/0xe0 get_page_from_freelist+0x1327/0x14d0 __alloc_pages+0x191/0x340 alloc_pages_vma+0x84/0x250 shmem_alloc_page+0x3f/0x90 shmem_alloc_and_acct_page+0x76/0x1c0 shmem_getpage_gfp+0x281/0x940 shmem_write_begin+0x36/0xe0 generic_perform_write+0xed/0x1d0 __generic_file_write_iter+0xdc/0x1b0 generic_file_write_iter+0x5d/0xb0 new_sync_write+0x11f/0x1b0 vfs_write+0x1ba/0x2a0 ksys_write+0x59/0xd0 do_syscall_64+0x37/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Charged to offline memcg libpod-conmon-15e4f9c758422306b73b2dd99f9d50a5ea53cbb16b4a13a2c2308a4253cc0ec8. So the page was not freed because it was part of a shmem segment. That is useful information that can help users to diagnose similar problems. With cgroup v1, /proc/cgroups can be read to find out the total number of memory cgroups (online + offline). With cgroup v2, the cgroup.stat of the root cgroup can be read to find the number of dying cgroups (most likely pinned by dying memcgs). The page_owner feature is not supposed to be enabled for production system due to its memory overhead. However, if it is suspected that dying memcgs are increasing over time, a test environment with page_owner enabled can then be set up with appropriate workload for further analysis on what may be causing the increasing number of dying memcgs. This patch (of 4): For *scnprintf(), vsnprintf() is always called even if the input size is 0. That is a waste of time, so just return 0 in this case. Note that vsnprintf() will never return -1 to indicate an error. So skipping the call to vsnprintf() when size is 0 will have no functional impact at all. Link: https://lkml.kernel.org/r/20220202203036.744010-1-longman@redhat.com Link: https://lkml.kernel.org/r/20220202203036.744010-2-longman@redhat.comSigned-off-by: -
Shuah Khan authored
Fix Unexpected indentation warns in page_owner: Documentation/vm/page_owner.rst:92: WARNING: Unexpected indentation. Documentation/vm/page_owner.rst:96: WARNING: Unexpected indentation. Documentation/vm/page_owner.rst:107: WARNING: Unexpected indentation. Link: https://lkml.kernel.org/r/20211215001929.47866-1-skhan@linuxfoundation.orgSigned-off-by:
Shuah Khan <skhan@linuxfoundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Shenghong Han authored
Update the documentation of ``page_owner``. [akpm@linux-foundation.org: small grammatical tweaks] Link: https://lkml.kernel.org/r/20211214134736.2569-1-hanshenghong2019@email.szu.edu.cnSigned-off-by:
Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Georgi Djakov <georgi.djakov@linaro.org> Cc: Liam Mark <lmark@codeaurora.org> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by:
-
Yixuan Cao authored
I noticed that there is two invalid lines of duplicate code. It's better to delete it. Link: https://lkml.kernel.org/r/20211213095743.3630-1-caoyixuan2019@email.szu.edu.cnSigned-off-by:
-
Shenghong Han authored
1) There is an unused variable. It's better to delete it. 2) One case is missing in the usage(). Link: https://lkml.kernel.org/r/20211213164518.2461-1-hanshenghong2019@email.szu.edu.cnSigned-off-by:
-
Chongxi Zhao authored
When viewing the page owner information, we expect that the information can be sorted by PID, so that we can quickly combine PID with the program to check the information together. We also expect that the information can be sorted by time. Time sorting helps to view the running status of the program according to the time interval when the program hangs up. Finally, we hope to pass the page_ owner_ Sort. C can reduce part of the output and only output the plate information whose memory has not been released, which can make us locate the problem of the program faster. Therefore, the following adjustments have been made: 1. Add the static functions search_pattern and check_regcomp to improve the cleanliness. 2. Add member attributes and their corresponding sorting methods. In terms of comparison time, int will overflow because the data of ull is too large, so the ternary operator is used 3. Add the -f parameter to filter out the information of blocks whose memory has not been released Link: https://lkml.kernel.org/r/20211206165653.5093-1-zhaochongxi2019@email.szu.edu.cnSigned-off-by:
Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Reviewed-by:
Sean Anderson <seanga2@gmail.com> Signed-off-by:
-
Yinan Zhang authored
Culling by comparing stacktrace would casue loss of some information. For example, if there exists 2 blocks which have the same stacktrace and the different head info Page allocated via order 0, mask 0x108c48(...), pid 73696, ts 1578829190639010 ns, free_ts 1576583851324450 ns prep_new_page+0x80/0xb8 get_page_from_freelist+0x924/0xee8 __alloc_pages+0x138/0xc18 alloc_pages+0x80/0xf0 __page_cache_alloc+0x90/0xc8 Page allocated via order 0, mask 0x108c48(...), pid 61806, ts 1354113726046100 ns, free_ts 1354104926841400 ns prep_new_page+0x80/0xb8 get_page_from_freelist+0x924/0xee8 __alloc_pages+0x138/0xc18 alloc_pages+0x80/0xf0 __page_cache_alloc+0x90/0xc8 After culling, it would be like this 2 times, 2 pages: Page allocated via order 0, mask 0x108c48(...), pid 73696, ts 1578829190639010 ns, free_ts 1576583851324450 ns prep_new_page+0x80/0xb8 get_page_from_freelist+0x924/0xee8 __alloc_pages+0x138/0xc18 alloc_pages+0x80/0xf0 __page_cache_alloc+0x90/0xc8 The info of second block missed. So, add -c to turn on culling by stacktrace. By default, it will cull by txt. Link: https://lkml.kernel.org/r/20211129145658.2491-1-zhangyinan2019@email.szu.edu.cnSigned-off-by:Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Changhee Han <ch0.han@lge.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by:
-
Sean Anderson authored
This adds the ability to sort by stacktraces. This is helpful when comparing multiple dumps of page_owner taken at different times, since blocks will not be reordered if they were allocated/free'd. Link: https://lkml.kernel.org/r/20211124193709.1805776-2-seanga2@gmail.comSigned-off-by:
-
Sean Anderson authored
The contents of page_owner have changed to include more information than the stack trace. On a modern kernel, the blocks look like Page allocated via order 0, mask 0x0(), pid 1, ts 165564237 ns, free_ts 0 ns register_early_stack+0x4b/0x90 init_page_owner+0x39/0x250 kernel_init_freeable+0x11e/0x242 kernel_init+0x16/0x130 Sorting by the contents of .txt will result in almost no repeated pages, as the pid, ts, and free_ts will almost never be the same. Instead, sort by the contents of the stack trace, which we assume to be whatever is after the first line. [seanga2@gmail.com: fix NULL-pointer dereference when comparing stack traces] Link: https://lkml.kernel.org/r/20211125162653.1855958-1-seanga2@gmail.com Link: https://lkml.kernel.org/r/20211124193709.1805776-1-seanga2@gmail.comSigned-off-by:
-
- 24 Mar, 2022 20 commits
-
-
Linus Torvalds authored
Merge more updates from Andrew Morton: "Various misc subsystems, before getting into the post-linux-next material. 41 patches. Subsystems affected by this patch series: procfs, misc, core-kernel, lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump, taskstats, panic, kcov, resource, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits) Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang" kernel/resource: fix kfree() of bootmem memory again kcov: properly handle subsequent mmap calls kcov: split ioctl handling into locked and unlocked parts panic: move panic_print before kmsg dumpers panic: add option to dump all CPUs backtraces in panic_print docs: sysctl/kernel: add missing bit to panic_print taskstats: remove unneeded dead assignment kasan: no need to unset panic_on_warn in end_report() ubsan: no need to unset panic_on_warn in ubsan_epilogue() panic: unset panic_on_warn inside panic() docs: kdump: add scp example to write out the dump file docs: kdump: update description about sysfs file system support arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible cgroup: use irqsave in cgroup_rstat_flush_locked(). fat: use pointer to simple type in put_user() minix: fix bug when opening a file with O_DIRECT ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ... -
https://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO updates from Alex Williamson: - Introduce new device migration uAPI and implement device specific mlx5 vfio-pci variant driver supporting new protocol (Jason Gunthorpe, Yishai Hadas, Leon Romanovsky) - New HiSilicon acc vfio-pci variant driver, also supporting migration interface (Shameer Kolothum, Longfang Liu) - D3hot fixes for vfio-pci-core (Abhishek Sahu) - Document new vfio-pci variant driver acceptance criteria (Alex Williamson) - Fix UML build unresolved ioport_{un}map() functions (Alex Williamson) - Fix MAINTAINERS due to header movement (Lukas Bulwahn) * tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio: (31 commits) vfio-pci: Provide reviewers and acceptance criteria for variant drivers MAINTAINERS: adjust entry for header movement in hisilicon qm driver hisi_acc_vfio_pci: Use its own PCI reset_done error handler hisi_acc_vfio_pci: Add support for VFIO live migration crypto: hisilicon/qm: Set the VF QM state register hisi_acc_vfio_pci: Add helper to retrieve the struct pci_driver hisi_acc_vfio_pci: Restrict access to VF dev BAR2 migration region hisi_acc_vfio_pci: add new vfio_pci driver for HiSilicon ACC devices hisi_acc_qm: Move VF PCI device IDs to common header crypto: hisilicon/qm: Move few definitions to common header crypto: hisilicon/qm: Move the QM header to include/linux vfio/mlx5: Fix to not use 0 as NULL pointer PCI/IOV: Fix wrong kernel-doc identifier vfio/mlx5: Use its own PCI reset_done error handler vfio/pci: Expose vfio_pci_core_aer_err_detected() vfio/mlx5: Implement vfio_pci driver for mlx5 devices vfio/mlx5: Expose migration commands over mlx5 device vfio: Remove migration protocol v1 documentation vfio: Extend the device migration protocol with RUNNING_P2P vfio: Define device migration protocol v2 ... -
Linus Torvalds authored
Merge tag 'hyperv-next-signed-20220322' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: "Minor patches from various people" * tag 'hyperv-next-signed-20220322' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Output host build info as normal Windows version number hv_balloon: rate-limit "Unhandled message" warning drivers: hv: log when enabling crash_kexec_post_notifiers hv_utils: Add comment about max VMbus packet size in VSS driver Drivers: hv: Compare cpumasks and not their weights in init_vp_index() Drivers: hv: Rename 'alloced' to 'allocated' Drivers: hv: vmbus: Use struct_size() helper in kmalloc()
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm updates from Paolo Bonzini: "ARM: - Proper emulation of the OSLock feature of the debug architecture - Scalibility improvements for the MMU lock when dirty logging is on - New VMID allocator, which will eventually help with SVA in VMs - Better support for PMUs in heterogenous systems - PSCI 1.1 support, enabling support for SYSTEM_RESET2 - Implement CONFIG_DEBUG_LIST at EL2 - Make CONFIG_ARM64_ERRATUM_2077057 default y - Reduce the overhead of VM exit when no interrupt is pending - Remove traces of 32bit ARM host support from the documentation - Updated vgic selftests - Various cleanups, doc updates and spelling fixes RISC-V: - Prevent KVM_COMPAT from being selected - Optimize __kvm_riscv_switch_to() implementation - RISC-V SBI v0.3 support s390: - memop selftest - fix SCK locking - adapter interruptions virtualization for secure guests - add Claudio Imbrenda as maintainer - first step to do proper storage key checking x86: - Continue switching kvm_x86_ops to static_call(); introduce static_call_cond() and __static_call_ret0 when applicable. - Cleanup unused arguments in several functions - Synthesize AMD 0x80000021 leaf - Fixes and optimization for Hyper-V sparse-bank hypercalls - Implement Hyper-V's enlightened MSR bitmap for nested SVM - Remove MMU auditing - Eager splitting of page tables (new aka "TDP" MMU only) when dirty page tracking is enabled - Cleanup the implementation of the guest PGD cache - Preparation for the implementation of Intel IPI virtualization - Fix some segment descriptor checks in the emulator - Allow AMD AVIC support on systems with physical APIC ID above 255 - Better API to disable virtualization quirks - Fixes and optimizations for the zapping of page tables: - Zap roots in two passes, avoiding RCU read-side critical sections that last too long for very large guests backed by 4 KiB SPTEs. - Zap invalid and defunct roots asynchronously via concurrency-managed work queue. - Allowing yielding when zapping TDP MMU roots in response to the root's last reference being put. - Batch more TLB flushes with an RCU trick. Whoever frees the paging structure now holds RCU as a proxy for all vCPUs running in the guest, i.e. to prolongs the grace period on their behalf. It then kicks the the vCPUs out of guest mode before doing rcu_read_unlock(). Generic: - Introduce __vcalloc and use it for very large allocations that need memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits) KVM: use kvcalloc for array allocations KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2 kvm: x86: Require const tsc for RT KVM: x86: synthesize CPUID leaf 0x80000021h if useful KVM: x86: add support for CPUID leaf 0x80000021 KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()" kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU KVM: arm64: fix typos in comments KVM: arm64: Generalise VM features into a set of flags KVM: s390: selftests: Add error memop tests KVM: s390: selftests: Add more copy memop tests KVM: s390: selftests: Add named stages for memop test KVM: s390: selftests: Add macro as abstraction for MEM_OP KVM: s390: selftests: Split memop tests KVM: s390x: fix SCK locking RISC-V: KVM: Implement SBI HSM suspend call RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function RISC-V: Add SBI HSM suspend related defines RISC-V: KVM: Implement SBI v0.3 SRST extension ... -
git://git.osdn.net/gitroot/tomoyo/tomoyo-test1Linus Torvalds authored
Pull tomoyo update from Tetsuo Handa: "Avoid unnecessarily leaking kernel command line arguments" * tag 'tomoyo-pr-20220322' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1: TOMOYO: fix __setup handlers return values
-
Linus Torvalds authored
Merge tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array transformations from Gustavo Silva: "Treewide patch that replaces zero-length arrays with flexible-array members. This has been baking in linux-next for a whole development cycle" * tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: treewide: Replace zero-length arrays with flexible-array members
-
Linus Torvalds authored
Merge tag 'prlimit-tasklist_lock-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull tasklist_lock optimizations from Eric Biederman: "prlimit and getpriority tasklist_lock optimizations The tasklist_lock popped up as a scalability bottleneck on some testing workloads. The readlocks in do_prlimit and set/getpriority are not necessary in all cases. Based on a cycles profile, it looked like ~87% of the time was spent in the kernel, ~42% of which was just trying to get *some* spinlock (queued_spin_lock_slowpath, not necessarily the tasklist_lock). The big offenders (with rough percentages in cycles of the overall trace): - do_wait 11% - setpriority 8% (done previously in commit 7f8ca0ed) - kill 8% - do_exit 5% - clone 3% - prlimit64 2% (this patchset) - getrlimit 1% (this patchset) I can't easily test this patchset on the original workload for various reasons. Instead, I used the microbenchmark below to at least verify there was some improvement. This patchset had a 28% speedup (12% from baseline to set/getprio, then another 14% for prlimit). This series used to do the setpriority case, but an almost identical change was merged as commit 7f8ca0ed ("kernel/sys.c: only take tasklist_lock for get/setpriority(PRIO_PGRP)") so that has been dropped from here. One interesting thing is that my libc's getrlimit() was calling prlimit64, so hoisting the read_lock(tasklist_lock) into sys_prlimit64 had no effect - it essentially optimized the older syscalls only. I didn't do that in this patchset, but figured I'd mention it since it was an option from the previous patch's discussion" micobenchmark.c: --------------- int main(int argc, char **argv) { pid_t child; struct rlimit rlim[1]; fork(); fork(); fork(); fork(); fork(); fork(); for (int i = 0; i < 5000; i++) { child = fork(); if (child < 0) exit(1); if (child > 0) { usleep(1000); kill(child, SIGTERM); waitpid(child, NULL, 0); } else { for (;;) { setpriority(PRIO_PROCESS, 0, getpriority(PRIO_PROCESS, 0)); getrlimit(RLIMIT_CPU, rlim); } } } return 0; } Link: https://lore.kernel.org/lkml/20211213220401.1039578-1-brho@google.com/ [v1] Link: https://lore.kernel.org/lkml/20220105212828.197013-1-brho@google.com/ [v2] Link: https://lore.kernel.org/lkml/20220106172041.522167-1-brho@google.com/ [v3] * tag 'prlimit-tasklist_lock-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: prlimit: do not grab the tasklist_lock prlimit: make do_prlimit() static
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull mount attributes PREEMPT_RT update from Christian Brauner: "This contains Sebastian's fix to make changing mount attributes/getting write access compatible with CONFIG_PREEMPT_RT. The change only applies when users explicitly opt-in to real-time via CONFIG_PREEMPT_RT otherwise things are exactly as before. We've waited quite a long time with this to make sure folks could take a good look" * tag 'fs.rt.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fs/namespace: Boost the mount_lock.lock owner instead of spinning on PREEMPT_RT.
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull mount_setattr updates from Christian Brauner: "This contains a few more patches to massage the mount_setattr() codepaths and one minor fix to reuse a helper we added some time back. The final two patches do similar cleanups in different ways. One patch is mine and the other is Al's who was nice enough to give me a branch for it. Since his came in later and my branch had been sitting in -next for quite some time we just put his on top instead of swap them" * tag 'fs.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: mount_setattr(): clean the control flow and calling conventions fs: clean up mount_setattr control flow fs: don't open-code mnt_hold_writers() fs: simplify check in mount_setattr_commit() fs: add mnt_allow_writers() and simplify mount_setattr_prepare()
-
Marco Elver authored
This reverts commit ea91a1d4. Since df05c0e9 ("Documentation: Raise the minimum supported version of LLVM to 11.0.0") the minimum Clang version is now 11.0, which fixed the UBSAN/KCSAN vs. KCOV incompatibilities. Link: https://bugs.llvm.org/show_bug.cgi?id=45831 Link: https://lkml.kernel.org/r/YaodyZzu0MTCJcvO@elver.google.com Link: https://lkml.kernel.org/r/20220128105631.509772-1-elver@google.comSigned-off-by:
Marco Elver <elver@google.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Miaohe Lin authored
Since commit ebff7d8f ("mem hotunplug: fix kfree() of bootmem memory"), we could get a resource allocated during boot via alloc_resource(). And it's required to release the resource using free_resource(). Howerver, many people use kfree directly which will result in kernel BUG. In order to fix this without fixing every call site, just leak a couple of bytes in such corner case. Link: https://lkml.kernel.org/r/20220217083619.19305-1-linmiaohe@huawei.com Fixes: ebff7d8f ("mem hotunplug: fix kfree() of bootmem memory") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Suggested-by:
David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Signed-off-by:
-
Aleksandr Nogikh authored
Allocate the kcov buffer during KCOV_MODE_INIT in order to untie mmapping of a kcov instance and the actual coverage collection process. Modify kcov_mmap, so that it can be reliably used any number of times once KCOV_MODE_INIT has succeeded. These changes to the user-facing interface of the tool only weaken the preconditions, so all existing user space code should remain compatible with the new version. Link: https://lkml.kernel.org/r/20220117153634.150357-3-nogikh@google.comSigned-off-by:
Aleksandr Nogikh <nogikh@google.com> Reviewed-by:
Dmitry Vyukov <dvyukov@google.com> Reviewed-by:
Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Taras Madan <tarasmadan@google.com> Signed-off-by:
-
Aleksandr Nogikh authored
Patch series "kcov: improve mmap processing", v3. Subsequent mmaps of the same kcov descriptor currently do not update the virtual memory of the task and yet return 0 (success). This is counter-intuitive and may lead to unexpected memory access errors. Also, this unnecessarily limits the functionality of kcov to only the simplest usage scenarios. Kcov instances are effectively forever attached to their first address spaces and it becomes impossible to e.g. reuse the same kcov handle in forked child processes without mmapping the memory first. This is exactly what we tried to do in syzkaller and inadvertently came upon this behavior. This patch series addresses the problem described above. This patch (of 3): Currently all ioctls are de facto processed under a spinlock in order to serialise them. This, however, prohibits the use of vmalloc and other memory management functions in the implementations of those ioctls, unnecessary complicating any further changes to the code. Let all ioctls first be processed inside the kcov_ioctl() function which should execute the ones that are not compatible with spinlock and then pass control to kcov_ioctl_locked() for all other ones. KCOV_REMOTE_ENABLE is processed both in kcov_ioctl() and kcov_ioctl_locked() as the steps are easily separable. Although it is still compatible with a spinlock, move KCOV_INIT_TRACE handling to kcov_ioctl(), so that the changes from the next commit are easier to follow. Link: https://lkml.kernel.org/r/20220117153634.150357-1-nogikh@google.com Link: https://lkml.kernel.org/r/20220117153634.150357-2-nogikh@google.comSigned-off-by:
-
Guilherme G. Piccoli authored
The panic_print setting allows users to collect more information in a panic event, like memory stats, tasks, CPUs backtraces, etc. This is an interesting debug mechanism, but currently the print event happens *after* kmsg_dump(), meaning that pstore, for example, cannot collect a dmesg with the panic_print extra information. This patch changes that in 2 steps: (a) The panic_print setting allows to replay the existing kernel log buffer to the console (bit 5), besides the extra information dump. This functionality makes sense only at the end of the panic() function. So, we hereby allow to distinguish the two situations by a new boolean parameter in the function panic_print_sys_info(). (b) With the above change, we can safely call panic_print_sys_info() before kmsg_dump(), allowing to dump the extra information when using pstore or other kmsg dumpers. The additional messages from panic_print could overwrite the oldest messages when the buffer is full. The only reasonable solution is to use a large enough log buffer, hence we added an advice into the kernel parameters documentation about that. Link: https://lkml.kernel.org/r/20220214141308.841525-1-gpiccoli@igalia.comSigned-off-by:Guilherme G. Piccoli <gpiccoli@igalia.com> Acked-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
Petr Mladek <pmladek@suse.com> Reviewed-by:
-
Guilherme G. Piccoli authored
Currently the "panic_print" parameter/sysctl allows some interesting debug information to be printed during a panic event. This is useful for example in cases the user cannot kdump due to resource limits, or if the user collects panic logs in a serial output (or pstore) and prefers a fast reboot instead of a kdump. Happens that currently there's no way to see all CPUs backtraces in a panic using "panic_print" on architectures that support that. We do have "oops_all_cpu_backtrace" sysctl, but although partially overlapping in the functionality, they are orthogonal in nature: "panic_print" is a panic tuning (and we have panics without oopses, like direct calls to panic() or maybe other paths that don't go through oops_enter() function), and the original purpose of "oops_all_cpu_backtrace" is to provide more information on oopses for cases in which the users desire to continue running the kernel even after an oops, i.e., used in non-panic scenarios. So, we hereby introduce an additional bit for "panic_print" to allow dumping the CPUs backtraces during a panic event. Link: https://lkml.kernel.org/r/20211109202848.610874-3-gpiccoli@igalia.comSigned-off-by:
Feng Tang <feng.tang@intel.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by:
-
Guilherme G. Piccoli authored
Patch series "Some improvements on panic_print". This is a mix of a documentation fix with some additions to the "panic_print" syscall / parameter. The goal here is being able to collect all CPUs backtraces during a panic event and also to enable "panic_print" in a kdump event - details of the reasoning and design choices in the patches. This patch (of 3): Commit de6da1e8 ("panic: add an option to replay all the printk message in buffer") added a new bit to the sysctl/kernel parameter "panic_print", but the documentation was added only in kernel-parameters.txt, not in the sysctl guide. Fix it here by adding bit 5 to sysctl admin-guide documentation. [rdunlap@infradead.org: fix table format warning] Link: https://lkml.kernel.org/r/20220109055635.6999-1-rdunlap@infradead.org Link: https://lkml.kernel.org/r/20211109202848.610874-1-gpiccoli@igalia.com Link: https://lkml.kernel.org/r/20211109202848.610874-2-gpiccoli@igalia.com Fixes: de6da1e8 ("panic: add an option to replay all the printk message in buffer") Signed-off-by:
-
Lukas Bulwahn authored
make clang-analyzer on x86_64 defconfig caught my attention with: kernel/taskstats.c:120:2: warning: Value stored to 'rc' is never read \ [clang-analyzer-deadcode.DeadStores] rc = 0; ^ Commit d94a0415 ("taskstats: free skb, avoid returns in send_cpu_listeners") made send_cpu_listeners() not return a value and hence, the rc variable remained only to be used within the loop where it is always assigned before read and it does not need any other initialisation. So, simply remove this unneeded dead initializing assignment. As compilers will detect this unneeded assignment and optimize this anyway, the resulting object code is identical before and after this change. No functional change. No change to object code. [akpm@linux-foundation.org: reduce scope of `rc'] Link: https://lkml.kernel.org/r/20220307093942.21310-1-lukas.bulwahn@gmail.comSigned-off-by:Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Tom Rix <trix@redhat.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Tiezhu Yang authored
panic_on_warn is unset inside panic(), so no need to unset it before calling panic() in end_report(). Link: https://lkml.kernel.org/r/1644324666-15947-6-git-send-email-yangtiezhu@loongson.cnSigned-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by:
-
Tiezhu Yang authored
panic_on_warn is unset inside panic(), so no need to unset it before calling panic() in ubsan_epilogue(). Link: https://lkml.kernel.org/r/1644324666-15947-5-git-send-email-yangtiezhu@loongson.cnSigned-off-by:
-
