Merge tag 'qcom-dt-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Qualcomm ARM Based Device Tree Updates for v4.5

* Add support for Sony Xperia Z
* Updates for Sony Honami board
* Updates for APQ8064 generic platform
* Updates for MSM8974 generic platform
* Add fixed rate oscillators for MSM8960 and APQ8064
* Add documentation for SMSM and SMP2P
* Fixup PMIC compat strings
* Add support for SMEM, RPM/SMD on APQ8084
* Fixup compat on IFC5640

* tag 'qcom-dt-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (24 commits)
  arm: dts: Add support for PMA8084 on APQ8084
  arm: dts: Add RPM/SMD support on APQ8084
  arm: dts: Add APQ8084 SMEM nodes
  ARM: dts: qcom: apq8064-ifc6410 Use hardware flow control for GSBI6
  arm: dts: qcom: apq8064: Add fixed rate on-board oscillators
  ARM: dts: qcom: msm8974: Add i2c8 node
  ARM: dts: qcom: msm8974: Disable wled and move it to honami
  arm: dts: qcom: Add generic PMIC gpio/MPP compat strings
  arm: dts: qcom: Add aliases for PMICs
  arm: dts: qcom: Update ifc6540 compat for qcom boot format
  arm: dts: qcom: Add board clocks
  ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts
  ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node
  ARM: dts: qcom: apq8064: Declare all pm8921 regulators
  ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes
  dt-binding: soc: qcom: Introduce qcom, smp2p binding documentation
  dt-binding: soc: qcom: Add Qualcomm SMSM device tree documentation
  devicetree: Add hardware rng entry to qcom-apq8064.dtsi
  ARM: dts: qcom: msm8974-honami: Specify charging parameters
  ARM: dts: qcom: msm8974-honami: Add uSD slot nodes
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

First batch of DT changes for 4.5:
- addition of nodes for sama5d2 & sama5d4
- some fixes for i2c hold time, compatible stings
- addition of a new patform by DENX: the MA5D4 SoM and EVK

* tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: sama5d2 Xplained: pmic needs a specific sda hold time
  ARM: at91/dt: sama5d4: update i2c compatible string
  ARM: at91/dt: sama5d4 master clock can run at 200MHz now
  ARM: at91/dt: sama5d2: add watchdog node
  ARM: at91/dt: sama5d4: Add support for DENX MA5D4 SoM and EVK
  ARM: at91/dt: sama5d4: Add pinmux for 8-bit MMC0 bus
  ARM: at91/dt: sama5d4: Fix mmc0 pinmux comments
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Allwinner DT changes for 4.5

Allwinner device-tree related patches for the 4.5 merge window.
  * Support for the H3
  * Addition of the RSB to the relevant devices (sun8i, sun9i)
  * Addition of the Video Engine clocks for the older SoCs (sun4i, sun7i)
  * Addition of the DRAM gates for the older SoCs (sun4i, sun7i)
  * Addition of the audio codec to a bunch of boards
  * New board: ICNova SWAC

* tag 'sunxi-dt-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (40 commits)
  ARM: dts: sun7i: Olimex A20-SOM-EVB: Enable mmc3 (baseboard SD socket)
  ARM: dts: sun7i: Olimex A20-SOM-EVB: Add LRADC keys
  ARM: dts: sun9i: cubieboard4: Enable Reduced Serial Bus controller
  ARM: dts: sun9i: cubieboard4: Enable consumer IR receiver
  ARM: dts: sun9i: cubieboard4: Enable LEDs
  ARM: dts: sun7i: Add VE (Video Engine) module clock node
  ARM: dts: sun4i: Add VE (Video Engine) module clock node
  ARM: dts: sun8i: Add Orange Pi Plus support
  ARM: dts: sunxi: Add Allwinner H3 DTSI
  ARM: dts: sun7i: Add DRAM gates
  ARM: dts: sun4i: Add DRAM gates
  ARM: dts: sun9i: Add NMI controller device node
  ARM: dts: sun9i: optimus: Enable Reduced Serial Bus controller
  ARM: dts: sun9i: Add Reduced Serial Bus controller device node to A80 dtsi
  ARM: dts: sun9i: optimus: Enable consumer IR receiver
  ARM: dts: sun9i: Add consumer IR receiver device node and pinmux settings
  ARM: dts: sun9i: optimus: Enable LED3
  ARM: dts: sun9i: Add A80 R_PIO pin controller device node
  ARM: dts: sun9i: Add TODO comments for the main and low power clocks
  ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

arm: Xilinx Zynq dt patches for v4.5

- Various small DT changes, GPIO, slcr, cpu label

* tag 'zynq-dt-for-4.5' of https://github.com/Xilinx/linux-xlnx:
  ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs.
  ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-bus
  ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property
  ARM: zynq: DT: Add interrupt-controller property to GPIO
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt-syscon-restart-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Device Tree changes adding necessary nodes for syscon reboot/poweroff
handlers on Exynos boards. The mach-exynos changes must base on top
of this to retain the bisectability of not loosing reboot/poweroff
features.

* tag 'samsung-dt-syscon-restart-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos5410
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos5
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos4
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos3250
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch adds support for the PMA8084 regulators found on APQ8084
platforms.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>

This patch adds support for RPM and SMD nodes that are present on APQ8084
platforms.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>

This patch adds all the required nodes to support SMEM on APQ8084
Signed-off-by: Andy Gross <agross@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>

GSBI6 UART module is connected to BT chip, which uses
hardware flow control lines. Enable them on SoC side.
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Currently the rates of the xo and sleep clocks are hard-coded in the
GCC driver, but this is a board layout description that actually should
be in the DT. Moving them into DT also allows us to insert the RPM
controlled clocks between the DT and GCC clocks.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

Merge tag 'socfpga_dts_for_v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

Merge "SoCFPGA DTS update for v4.5" from Dinh Nguyen:

- Add DT board file for Denx MCVEVK board

* tag 'socfpga_dts_for_v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard

Merge tag 'realview-base-armsoc-2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt

Merge "Realview DT files" from Linus Walleij:

The device tree changes for the continued RealView DT
support.

* tag 'realview-base-armsoc-2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: realview: add device tree for PB11MPCore
  clk: add ARM syscon ICST device tree bindings
  ARM: add DT bindings for the ARM11MPCore CPU cluster

Pull "Broadcom devicetree changes for v4.5¨ from Florian Fainelli:

This pull request contains the Broadcom ARM-based Device Tree changes for 4.5:

- Jon Mason enables the following for Broadcom Northstar Plus SoCs: PCI (using
  iProc PCI), NAND flash controller (BRCMNAND), TWD Timer and Watchdog
  (Cortex-A9), I2C (iProc), clock providers, does some Device Tree cleanups
  (re-parenting, fixing register sizes and hierarchy)

- Jon Mason also adds support for some reference Broadcom Northstar reference
  designs like the BCM5301X SVK reference boards, updates the existing binding
  documentation to cover the Northstar chips: 4708, 4709 and 53012.

- Pramod Kumar adds the GPIO to pinctrl mapping for the Broadcom Northstar Plus
  SoCs

- Yendapally Reddy Dhananjaya Reddy adds pinctrl Device Tree nodes for the
  Broadcom Northstar Plus SoCs device tree nodes

- Ray Jui adds Cygnus PCIe PHY Device Tree nodes and enables MSI for the iProc
  PCI controller on Cygnus platforms

- Kapil Hali adds SMP binding documentation and Device Tree nodes for the
  Northstar Plus SoCs

- Florian Fainelli adds clock provider support for the Broadcom BCM63138 DSL
  SoCs by utilizing the existing iProc ARM PLL controller, this includes a
  stable topic branch from Stephen Boyd to be merged

- Rafal Milecki adds missing LEDs for the Netgear R8000 router

* tag 'arm-soc/for-4.5/devicetree' of http://github.com/Broadcom/stblinux:
  ARM: dts: Enable MSI support for Broadcom Cygnus
  ARM: dts: Add SMP support for Broadcom NSP
  dt-bindings: add SMP enable-method for Broadcom NSP
  ARM: dts: enable pinctrl for Broadcom NSP
  ARM: dts: enable PCIe PHY support for Cygnus
  ARM: dts: Cygnus: define ngpios property in gpio controller's node
  ARM: BCM5301X: Add missing Netgear R8000 LEDs
  ARM: dts: BCM63xx: Add ARMPLL device tree nodes
  clk: bcm: Add BCM63138 clock support
  clk: iproc: Extend binding to cover BCM63138
  ARM: dts: enable clock support for Broadcom NSP
  ARM: dts: enable clock support for BCM5301X
  ARM: dts: NSP: Add I2C support to the DT
  ARM: dts: NSP: Device Tree clean-ups
  dts: pinctrl: Add GPIO to Pinctrl pin mapping in DT
  ARM: dts: bcm5301x: Add BCM SVK DT files
  dt-bindings: Add new SoCs to bcm4708 DT bindings
  ARM: dts: NSP: Add TWD Support to DT
  ARM: dts: NSP: Add NAND Support to DT
  ARM: dts: NSP: Add PCI support

Data have to be held longer for the PMIC device. The ACT8945A
datasheet claims that minimum SDA data hold time is about 300 ns.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

A new compatible string has been introduced: atmel,sama5d4-i2c. It
allows to use the i2c-sda-hold-time-ns property if needed.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

After the change of frequency a SAMA5D4 can reach, we have to modify the
maximum clock specification for the master clock, up to 200MHz now.

It avoids the wrong message saying that "master clk is overclocked" for this
configuration.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add watchdog node to support SAMA5D4 watchdog.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add support for the DENX MA5D4 SoM and MA5D4EVK board. The system
consists of a SoM with eMMC, SPI NOR for booting, 2x SPI CAN chip
and an EVK with microSD slot, 2x UART, 2x CAN port, 3x USB port,
LEDs and expansion headers.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add pinmux for the 4 remaining signals used in 8-bit MMC 0
bus configuration.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Synchronise the comments in mmc0 pinmux node with HSMCI0 pinmux
description in the Atmel SAMA5D4 datasheet from 24-Aug-15 page
1119, section 37.6.1, Table 37-3 .
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: Josh Wu <josh.wu@atmel.com>
Reported-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This adds a device tree for the ARM RealView ARM11MPCore
reference design.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This adds the device tree bindings for the ARM Syscon ICST
oscillators, which is a register-level interface to the
Integrated Device Technology (IDT) ICS525 and ICS307
serially programmable oscillators.

Cc: devicetree@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The ARM11MPCore has a Snoop Control Unit, but references to it
were missing from the DT specification. Define a compatible
string for this unit.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

By adding labels to the cpu nodes in the dtsi, a dts that
includes it can change the OPPs by referencing the cpu0
through the label.
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

The SLCR (System-Level Control Registers) block is an MFD (Multi
Function Device) rather than a bus.

"simple-mfd" seems a more suitable compatible string than "simple-bus".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Though the keyboard driver for GPIO buttons(gpio-keys) will continue to
check for/support the legacy "gpio-key,wakeup" boolean property to
enable gpio buttons as wakeup source, "wakeup-source" is the new
standard binding.

This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property in order to avoid any futher copy-paste
duplication.

Cc: Michal Simek <michal.simek@xilinx.com>
Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

GPIO can be used as interrupt-controller. Add the missing properties to
the GPIO node.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Merge tag 'omap-for-v4.5/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "Device tree changes for omaps for v4.5 merge window" from Tony Lindgren:

- Update all omaps to use pinctrl macros. This makes comparing the pinmux
  settings against the documentation much earlier. Javier compared the
  checksums of the generated dtb files to make sure nothing changed for
  the dtb files.

- Updates for dm816x

- Add GPMC DMA channels for am437x

- Updates for LogicPD Torpedo

- Basic support for CompuLab cm-t335

- Remove tps65217.dtsi file, we're better off adding SoC generic board
  dtsi files for the common features

- Add support for ELM on am33xx

- Add support for Bosch shc c3 board

- Add qspi aliases for am437x and dra7

- Wake-up support for dra7-evm uart1

- Basic support for CompuLab sbc-t43

- Basic support for CompuLab cl-som-am57x

- Use MMC pwrseq for libertas WLAN on igep0020 and igep0030

* tag 'omap-for-v4.5/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (97 commits)
  ARM: dts: omap3-igep0030: Use MMC pwrseq to init SDIO WiFi
  ARM: dts: omap3-igep0020: Use MMC pwrseq to init SDIO WiFi
  ARM: dts: am57xx: cl-som-am57x: skip resetting ETH PHYs
  ARM: dts: am57xx: sbc-am57x: add HDMI support
  ARM: dts: am57xx: compulab-sb-som: add HDMI connector
  ARM: dts: am57xx: sbc-am57x: add LCD support
  ARM: dts: am57xx: sbc-am57x: add GPIO expander support
  ARM: dts: am57xx: sbc-am57x: add EEPROM support
  ARM: dts: am57xx: sbc-am57x: add usb vbus pinmux
  ARM: dts: am57xx: cl-som-am57x: add MMC1 support
  ARM: dts: am57xx: sbc-am57x: add basic board support
  ARM: dts: am57xx: cl-som-am57x: add analog audio support
  ARM: dts: am57xx: cl-som-am57x: add touchscreen support
  ARM: dts: am57xx: cl-som-am57x: add USB support
  ARM: dts: am57xx: cl-som-am57x: add dual EMAC support
  ARM: dts: am57xx: cl-som-am57x: add spi-flash support
  ARM: dts: am57xx: cl-som-am57x: add eMMC support
  ARM: dts: am57xx: cl-som-am57x: add EEPROM support
  ARM: dts: am57xx: cl-som-am57x: add I2C3 support
  ARM: dts: am57xx: cl-som-am57x: dts: add RTC support
  ...

Merge "mvebu dt for 4.5 (part 2)" from Gregory CLEMENT:

- Fix Armada 388 GP dts
- Add clock related to PMU for Dove
- Add SolidRun Armada 388 Clearfog A1 dts

* tag 'mvebu-dt-4.5-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: Add SolidRun Armada 388 Clearfog A1 DT file
  dt-bindings: add Marvell PMU documentation
  ARM: dts: dove: add Dove divider clocks
  dt-bindings: add Marvell core PLL and clock divider PMU documentation
  ARM: mvebu: remove duplicated regulator definition in Armada 388 GP

Merge "mvebu dt for 4.5 (part 1)" from Gregory CLEMENT:

Update partition handling for ix4-300d

* tag 'mvebu-dt-4.5-1' of git://git.infradead.org/linux-mvebu:
  ARM: dt: mvebu: ix4-300d: Cleanup NAND partition ranges
  ARM: dt: mvebu: ix4-300d: move partitions to partition sub-node
  ARM: dt: mvebu: ix4-300d: remove whole flash partition

Merge "Marvell Berlin DT changes (round 1)" from Sebastian Hesselbarth:

- BG2Q cleanups (DMP eMMC, duplicated interrupt-parents)
- add BG2, BG2CD, BG2Q watchdog nodes
- add BG2Q DMP SDHCI1 nodes

* tag 'berlin-dt-for-4.5-1' of git://git.infradead.org/users/hesselba/linux-berlin:
  arm: dts: berlin2q-marvell-dmp: add sdhci1 fully functionality
  arm: dts: berlin2: add watchdog nodes
  arm: dts: berlin2cd: add watchdog nodes
  arm: dts: berlin2q: add watchdog nodes
  arm: dts: berlin2q: remove duplicated interrupt-parent
  arm: dts: berlin2q-marvell-dmp: remove broken-cd from eMMC node

Merge tag 'v4.5-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "rockchip dts32 changes for 4.5" from Heiko Stuebner:

First round of arm devicetree changes.
Among the bigger changes are two new Veyron boards, support for
the dual-core cortex-a7 rk3036 soc and addition of support for
the crypto engine of the rk3288. Smaller changes include some
IR receivers, updates of thermal settings more reflecting real-
life and testing-results.

* tag 'v4.5-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add gpio-ir-receiver to the R89 board
  ARM: dts: rockchip: add touchscreen node to veyron minnie
  ARM: dts: rockchip: add veyron-mickey board
  ARM: dts: rockchip: add veyron-brain board
  ARM: dts: rockchip: make sure edp_24m is associated to xin24m on veyron
  ARM: dts: rockchip: override thermal settings on veyron-speedy
  ARM: dts: rockchip: update the thermal management on rk3288
  ARM: dts: rockchip: Add Crypto node for rk3288
  ARM: dts: rockchip: add rk3036-evb board
  ARM: dts: rockchip: add core rk3036 dtsi
  clk: rockchip: add dt-binding header for rk3036
  clk: rockchip: add an id for rk3288 crypto clk
  ARM: dts: rockchip: Add IR receiver to RK3288 Radxa Rock 2 Square
  ARM: dts: rockchip: add channels properties for i2s
  ARM: dts: rockchip: set system-power-controller property on rk3288-rock2
  ARM: dts: rockchip: Setup rk3066/rk3188 ethernet0 alias for u-boot
  ARM: dts: rockchip: Setup rk3288 ethernet0 alias for u-boot

UniPhier SoCs (except PH1-sLD3) have several nodes in common.
Factor out them into uniphier-common32.dtsi.  This improves the code
maintainability.

PH1-sLD3 is so old that it has more or less different register maps
than the others.  So, it cannot be included in this refactoring.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The UART3 is assigned with IRQ 29 for old SoCs, IRQ 177 for new ones,
and PH1-Pro4 is on the boundary.

  PH1-sLD3: UART3 is unavailable
  PH1-LD4, PH1-sLD8: only IRQ 29 is supported
  PH1-Pro4: both IRQ 29 and 177 are supported
  PH1-Pro5, ProXstream2, PH1-LD6b: only IRQ 177 is supported

This SoC can choose either IRQ 29 or IRQ 177, but the former is shared
with another hardware (low speed serial0).  The latter is dedicated
for this hardware and more recommended.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ux500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

Merge "Device Tree changes for Ux500" from Linus Walleij:

- Push the Rohm touchscreen to the STUIB, as the TVK UIB has
  a Synaptics RMI4 touchscreen.
- Set up the right sensor IRQs for the Snowball, so that
  periodic data ready-IRQ capture starts working.
- Use wakeup-source consequently.
- Remove legacy regulator-compatible strings.
- Define the sensors on the HREFP TVK board properly.

* tag 'ux500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: configure the sensors on the TVK board correctly
  ARM: u300: remove regulator-compatible usage
  ARM: ux500: remove regulator-compatible usage
  ARM: ux500: replace legacy *,wakeup property with wakeup-source
  ARM: ux500: Assign proper sensor IRQs for Snowball
  ARM: ux500: push down Rohm TS to STUIB

Merge tag 'renesas-dt2-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Second Round of Renesas ARM Based SoC DT Updates for v4.5" from Simon Horman:

* sh73a0, r8a7740: Add L2 cache-controller node
* r8a7791, r8a7794: remove deprecated #gpio-range-cells
* r8a7793: Add DU support and enable for VGA port
* r8a7790: switch console back to scif0
* alt: Correct ether and scif2 pinmux
* koelsch: Correct hdmi pinmux
* silk, lager, porter, bockw: Move SPI FLASH partitions to subnode
* bockw: Add schi0 pinmux

* tag 'renesas-dt2-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: sh73a0 dtsi: Add L2 cache-controller node
  ARM: shmobile: r8a7740 dtsi: Add L2 cache-controller node
  ARM: shmobile: alt: Correct ether pfc
  ARM: shmobile: alt: Correct scif2 pfc
  ARM: shmobile: silk: Move SPI FLASH partitions to subnode
  ARM: shmobile: lager: Move SPI FLASH partitions to subnode
  ARM: shmobile: porter: Move SPI FLASH partitions to subnode
  ARM: shmobile: bockw: Move SPI FLASH partition to subnode
  ARM: shmobile: r8a7791: koelsch: Fix pinmux for HDMI
  ARM: shmobile: r8a7794: remove deprecated #gpio-range-cells from dtsi
  ARM: shmobile: r8a7791: remove deprecated #gpio-range-cells from dtsi
  ARM: shmobile: r8a7793: Add DU node to device tree
  ARM: shmobile: r8a7794: alt: Enable PFC DU for the VGA port
  ARM: shmobile: bockw dts: define sdhi0 pins with pull-ups
  ARM: shmobile: r8a7790: switch console back to scif0

The Olimex A20-SOM-EVB is an evaluation board for the Olimex
A20-SOM system-on-module. The baseboard provides a full-size SD
socket (connected to mmc3) in addition to the micro-SD socket on
the SOM itself (which is connected to mmc0).

Enable the mmc3 controller in the dts.
Signed-off-by: Karsten Merker <merker@debian.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The Olimex A20-SOM-EVB is an evaluation board for the Olimex
A20-SOM system-on-module.  It provides a set of android-style
buttons (labeled "VOL+", "VOL-", "MENU", "SEARCH", "HOME", "ESC"
and "ENTER") which are connected to a low-resolution ADC via a
resistor network.

This patch adds appropriate button definitions to the board
dts. The voltages assigned to the keys are specified in the
board schematics published by the manufacturer.
Signed-off-by: Karsten Merker <merker@debian.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The Reduced Serial Bus (RSB) controller is used to talk to the 3
companion ICs (2 PMICs, 1 RTC/codec IC) on the board.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The Cubieboard4 has a consumer IR receiver. Enable it in the DT.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>