- 05 Dec, 2023 21 commits
-
-
Abel Vesa authored
Add support for the SDC ATNA45AF01 panel. Signed-off-by:
Abel Vesa <abel.vesa@linaro.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Dmitry Baryshkov authored
The drm_atomic_print_new_state() already prints private object state via drm_atomic_private_obj_print_state(). Add private object state dumping to __drm_state_dump(), so that it is also included into drm_state_dump() output and into debugfs/dri/N/state file. Reviewed-by:
Rob Clark <robdclark@gmail.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231203000532.1290480-2-dmitry.baryshkov@linaro.org
-
Boris Brezillon authored
Some users need to release resources attached to the vm_bo object when it's destroyed. In Panthor's case, we need to release the pin ref so BO pages can be returned to the system when all GPU mappings are gone. This could be done through a custom drm_gpuvm::vm_bo_free() hook, but this has all sort of locking implications that would force us to expose a drm_gem_shmem_unpin_locked() helper, not to mention the fact that having a ::vm_bo_free() implementation without a ::vm_bo_alloc() one seems odd. So let's keep things simple, and extend drm_gpuvm_bo_put() to report when the object is destroyed. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204151406.1977285-1-boris.brezillon@collabora.com
-
AngeloGioacchino Del Regno authored
To make sure that we don't unintentionally perform any unclocked and/or unpowered R/W operation on GPU registers, before turning off clocks and regulators we must make sure that no GPU, JOB or MMU ISR execution is pending: doing that requires to add a mechanism to synchronize the interrupts on suspend. Add functions panfrost_{gpu,job,mmu}_suspend_irq() which will perform interrupts masking and ISR execution synchronization, and then call those in the panfrost_device_runtime_suspend() handler in the exact sequence of job (may require mmu!) -> mmu -> gpu. As a side note, JOB and MMU suspend_irq functions needed some special treatment: as their interrupt handlers will unmask interrupts, it was necessary to add an `is_suspended` bitmap which is used to address the possible corner case of unintentional IRQ unmasking because of ISR execution after a call to synchronize_irq(). At resume, clear each is_suspended bit in the reset path of JOB/MMU to allow unmasking the interrupts. Signed-off-by:AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
AngeloGioacchino Del Regno authored
In preparation for adding a IRQ synchronization mechanism for PM suspend, add gpu_irq and mmu_irq variables to struct panfrost_device and change functions panfrost_gpu_init() and panfrost_mmu_init() to use those. Reviewed-by:
-
AngeloGioacchino Del Regno authored
Some SoCs may be equipped with a GPU containing two core groups and this is exactly the case of Samsung's Exynos 5422 featuring an ARM Mali-T628 MP6 GPU: the support for this GPU in Panfrost is partial, as this driver currently supports using only one core group and that's reflected on all parts of it, including the power on (and power off, previously to this patch) function. The issue with this is that even though executing the soft reset operation should power off all cores unconditionally, on at least one platform we're seeing a crash that seems to be happening due to an interrupt firing which may be because we are calling power transition only on the first core group, leaving the second one unchanged, or because ISR execution was pending before entering the panfrost_gpu_power_off() function and executed after powering off the GPU cores, or all of the above. Finally, solve this by: - Avoid to enable the power transition interrupt on reset; and - Ignoring the core_mask and ask the GPU to poweroff both core groups Fixes: 22aa1a20 ("drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()") Reviewed-by:
-
Michael Walle authored
Timings taken from the datasheet, although sometimes there are just typical values and it's not clear if they are no min and max values or if you must use the typical value exactly. To make things worse, there is no back porch but only a combined sync and back porch length. Unfortunately, there is not public datasheet. Therefore, here are the relevant timings: | min | typ | max | -----------------+-----+--------+-----+ CLK frequency | - | 25.175 | - | HS period | - | 800 | - | HS pulse width | 5 | 30 | - | HS-DEN time | 112 | 144 | 175 | DEN pulse width | - | 640 | - | VS pulse width | 1 | 3 | 5 | VS-DEN time | - | 35 | - | VS period | - | 525 | - | Signed-off-by:Michael Walle <mwalle@kernel.org> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231123102404.2022201-2-mwalle@kernel.orgSigned-off-by:
-
Michael Walle authored
Add Evervision VGG644804 5.7" 640x480 LVDS panel compatible string. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231123102404.2022201-1-mwalle@kernel.orgSigned-off-by:
-
Philipp Zabel authored
Add support for Ampire AM8001280G LCD panels. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
-
Philipp Zabel authored
Document the compatible value for Ampire AM8001280G LCD panels. Signed-off-by:
-
Marco Felsch authored
The panel.prepare() call requires an initialized MIPI-DSI host, so set the prepare_prev_first flag to indicate that the host must be initialized first. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Chris Morgan authored
Add support for the Powkiddy X55 panel as used on the Powkiddy X55 handheld gaming console. This panel uses a Himax HX8394 display controller and requires a vendor provided init sequence. The display resolution is 720x1280 and is 67mm by 121mm as measured with calipers. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Reviewed-by:
-
Chris Morgan authored
Add compatible string for the Powkiddy X55 panel. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231204185719.569021-6-macroalpha82@gmail.comSigned-off-by:
-
Chris Morgan authored
Add support for setting the rotation property for the Himax HX8394 panel. Signed-off-by:
-
Chris Morgan authored
Document panel rotation for Himax HX8394 display panel. Signed-off-by:
-
Chris Morgan authored
The driver shutdown is duplicate as it calls drm_unprepare and drm_disable which are called anyway when associated drivers are shutdown/removed. Signed-off-by:
-
Chris Morgan authored
Drop the panel specific prepare/unprepare logic. This is now tracked by the DRM stack [1]. [1] commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel") Signed-off-by:
-
Tony Lindgren authored
This panel is found on Motorola mapphone tablets from mz615 to mz617. Signed-off-by:
Tony Lindgren <tony@atomide.com> Reviewed-by:
-
Tony Lindgren authored
This panel is found on Motorola mapphone tablets mz615 to mz617. Signed-off-by:
-
Danilo Krummrich authored
Make use of GPUVM's drm_exec helper functions preventing direct access to GPUVM internal data structures, such as the external object list. This is especially important to ensure following the locking rules around the GPUVM external object list. Fixes: ff5f643d ("drm/imagination: Add GEM and VM related code") Reviewed-by:
Donald Robson <donald.robson@imgtec.com> Signed-off-by:
-
Danilo Krummrich authored
Fall back to drm_exec_lock_obj() if num_fences is zero for the drm_gpuvm_prepare_* function family. Otherwise dma_resv_reserve_fences() would actually allocate slots even though num_fences is zero. Cc: Christian König <christian.koenig@amd.com> Acked-by:
-
- 04 Dec, 2023 19 commits
-
-
Harshit Mogalapalli authored
Smatch warns: drivers/gpu/drm/v3d/v3d_submit.c:1222 v3d_submit_cpu_ioctl() warn: missing error code 'ret' When there is no job type or job is submitted with wrong number of BOs it is an error path, ret is zero at this point which is incorrect return. Fix this by changing it to -EINVAL. Fixes: aafc1a2b ("drm/v3d: Add a CPU job submission") Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204122102.181298-1-harshit.m.mogalapalli@oracle.com
-
Dmitry Baryshkov authored
This reverts commit e50e5fed. Although the Solid Fill planes patchset got all reviews and acknowledgements, it doesn't fulfill requirements for the new uABI. It has neither corresponding open-source userspace implementation nor the IGT tests coverage. Reverting this patchset until userspace obligations are fulfilled. Acked-by:
Simon Ser <contact@emersion.fr> Acked-by:
-
Dmitry Baryshkov authored
This reverts commit 85863a4e. Although the Solid Fill planes patchset got all reviews and acknowledgements, it doesn't fulfill requirements for the new uABI. It has neither corresponding open-source userspace implementation nor the IGT tests coverage. Reverting this patchset until userspace obligations are fulfilled. Acked-by:
-
Dmitry Baryshkov authored
This reverts commit 4b641670. Although the Solid Fill planes patchset got all reviews and acknowledgements, it doesn't fulfill requirements for the new uABI. It has neither corresponding open-source userspace implementation nor the IGT tests coverage. Reverting this patchset until userspace obligations are fulfilled. Acked-by:
-
Dmitry Baryshkov authored
This reverts commit 8283ac78. Although the Solid Fill planes patchset got all reviews and acknowledgements, it doesn't fulfill requirements for the new uABI. It has neither corresponding open-source userspace implementation nor the IGT tests coverage. Reverting this patchset until userspace obligations are fulfilled. Acked-by:
-
Dmitry Baryshkov authored
This reverts commit e86413f5. Although the Solid Fill planes patchset got all reviews and acknowledgements, it doesn't fulfill requirements for the new uABI. It has neither corresponding open-source userspace implementation nor the IGT tests coverage. Reverting this patchset until userspace obligations are fulfilled. Acked-by:
-
Dmitry Baryshkov authored
This reverts commit 4ba6b7a6. Although the Solid Fill planes patchset got all reviews and acknowledgements, it doesn't fulfill requirements for the new uABI. It has neither corresponding open-source userspace implementation nor the IGT tests coverage. Reverting this patchset until userspace obligations are fulfilled. Acked-by:
-
Dmitry Baryshkov authored
This reverts commit f1e75da5. Although the Solid Fill planes patchset got all reviews and acknowledgements, it doesn't fulfill requirements for the new uABI. It has neither corresponding open-source userspace implementation nor the IGT tests coverage. Reverting this patchset until userspace obligations are fulfilled. Acked-by:
-
Dmitry Baryshkov authored
Instead of having a single file with all bridge chains, list bridges under a corresponding per-encoder debugfs directory. While we are at it, also slightly improve the formatting of the bridge data: split a single line entry into multiple lines, include the symbol name of the bridge funcs and add the textual representation of the bridge ops. Example of the listing: $ cat /sys/kernel/debug/dri/0/encoder-0/bridges bridge[0]: dsi_mgr_bridge_funcs type: [0] Unknown ops: [0] bridge[1]: lt9611uxc_bridge_funcs type: [11] HDMI-A OF: /soc@0/geniqup@9c0000/i2c@994000/hdmi-bridge@2b:lontium,lt9611uxc ops: [7] detect edid hpd Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by:
-
Dmitry Baryshkov authored
Each of connectors and CRTCs used by the DRM device provides debugfs directory, which is used by several standard debugfs files and can further be extended by the driver. Add such generic debugfs directories for encoder. Reviewed-by:
-
Dmitry Baryshkov authored
Use the freshly defined DRM_AUX_HPD_BRIDGE instead of open-coding the same functionality for the DRM bridge chain termination. Acked-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Dmitry Baryshkov authored
Use the freshly defined DRM_AUX_HPD_BRIDGE instead of open-coding the same functionality for the DRM bridge chain termination. Reviewed-by:
Bjorn Andersson <andersson@kernel.org> Acked-by:
-
Dmitry Baryshkov authored
Several USB-C controllers implement a pretty simple DRM bridge which implements just the HPD notification operations. Add special helper for creating such simple bridges. Acked-by:
-
Dmitry Baryshkov authored
Switch to using the new DRM_AUX_BRIDGE helper to create the transparent DRM bridge device instead of handcoding corresponding functionality. Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Dmitry Baryshkov authored
Switch to using the new DRM_AUX_BRIDGE helper to create the transparent DRM bridge device instead of handcoding corresponding functionality. Acked-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Dmitry Baryshkov authored
Define a helper for creating simple transparent bridges which serve the only purpose of linking devices into the bridge chain up to the last bridge representing the connector. This is especially useful for DP/USB-C bridge chains, which can span across several devices, but do not require any additional functionality from the intermediate bridges. Reviewed-by:
-
Frank Binns authored
This is the tree used by nearly all other DRM drivers, so use it for the PowerVR driver as well. Signed-off-by:
Frank Binns <frank.binns@imgtec.com> Signed-off-by:
-
Dan Carpenter authored
The i2c_master_send/recv() functions return negative error codes or the number of bytes that were able to be sent/received. This code has two problems. 1) Instead of checking if all the bytes were sent or received, it checks that at least one byte was sent or received. 2) If there was a partial send/receive then we should return a negative error code but this code returns success. Fixes: a9fe713d ("drm/bridge: Add PTN3460 bridge driver") Cc: stable@vger.kernel.org Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
Stefan Eichenberger authored
Add supplies to the driver that can be used to turn the Lontium lt8912b on and off. It can have up to 7 independent supplies, we add them all and enable/disable them with bulk_enable/disable. Signed-off-by:
Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by:
-
