reorganize the code such that only the primitives (i.e., the functions
that load the CP ring) are hardware specific; dynamically link the
primitives in a (new) pointer structure inside r600_blit at
blit initialization time so that the functions that control the blit
operations can be made common for r600 and evergreen parts
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Lots of new (and hopefully useful) benchmark. Load the driver
with radeon_benchmark=<test_number> and enjoy. Among tests
added are VRAM to VRAM blits and blits with buffer size sweeps.
The latter can be from GTT to VRAM, VRAM to GTT, and VRAM to VRAM
and there are two types of sweeps: powers of two and (probably
more interesting) buffers sizes that correspond to common modes.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

factor out repeated code into functions
fix units in which the throughput is reported (megabytes per second
and megabits per second make sense, others are kind of confusing)
make report more amenable to awk and friends (e.g. whitespace is
always the separator, unit is separated from the number, etc)
add #defines for some hard coded constants

besides "beautification" this reorg is done in preparation
for writing more elaborate benchmarks
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

some 3d register bits look like magic in r600 blit functions
use predefined constants to make it more intuitive what they are
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

some bits in 3D registers used by blit functions look like
magic and this is hard to follow; change them to a little bit
more meaningful pre-defined constants
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Covert 4k pages to multiples of 64x64x4 tiles.
This is also more efficient than a scanline based
approach from the MC's perspective.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Covert 4k pages to multiples of 64x64x4 tiles.
This is also more efficient than a scanline based
approach from the MC's perspective.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

There is no point in re-doing in post_xfer all the initialization
that was already done by pre_xfer. Instead, only do the work which
differs from pre_xfer.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

in case of using two drivers such as fimd and hdmi controller that
they have their own hardware interrupt, drm framework doesn't provide
pipe number corresponding to it. so the pipe should be set to event's
from specific crtc.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

this patch adds the following comments and code clean.
- add comment of exynos_drm_crtc_apply() call at page flip time.
- add comment that when exynos_drm_fbdev_reinit() is called,
  why num_connector is 0 and also the framebuffers should be destroyed.
- remove buf_off member from struct exynos_drm_overlay because this member
  isn't used anymore.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

this patch solves the problem that fb_helper is released
when exynos_drm_fbdev_reinit() was called. if this function call
is ok then just return.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

sub drivers should refer to its own device object to access
its own context.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

buffer addess is set to shadow register and then applied to
real register at vsync front porch time.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

this patch adds common members to overlay structure and
makes each driver such as fimd or hdmi driver set them to
its own structure.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This shrinks the sizes of a lot of functions in the radeon driver
dramatically.

With a non force inline + -Os kernel this is default anyways.

Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

With this patch I'm only about 50k larger with DRM debugging
enables (why is that enabled by default?!?), and slightly
smaller without.

[airlied: moved r100.c additions to radeon_ring.c]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Remove bogus inlines in evergreen and r100.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

With the dropped inlines gccs starts warning about genuinely unused
functions. Remove r600_bpe_from_format, evergreen_cs_track_validate_cb,
evergreen-cs_packet_next_is_pkt3_nop which are all unused.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fixes

evergreen_cs_parse                          4080   23124  +19044

and others compared to a non force inline kernel.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This fixes kernel panics when running the vbltest from the drm repo. We
can't just skip initializing the vblank system since it sets up certain
state for us, see: "vmwgfx: Enable use of the vblank system."
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Make sure we null the display private, make sure we catch and
handle vblank failing to init and don't call vblank_cleanup if
we haven't initialized the display system.
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Looks like the same pcie gen2 speed initialization for
Evergreen also works on Cayman and seems to come up fine,
so enable it if the module parameter says so
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Enabling pcie gen2 speed was skipped for Northern Islands
AISCs, although it looks like it works just fine with the same
initialization sequence used for evergreen.

According to Alex D. gen2 init was skipped to prevent a crash
that has been caused by some other bug that has been
fixed in the meantime; so now it should be safe to enable it.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Also improve a bit on the Kconfig help.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* 'drm-intel-next' of git://people.freedesktop.org/~keithp/linux:
  drm/i915: Dumb down the semaphore logic
  drm/i915: pass ELD to HDMI/DP audio driver
  drm: support routines for HDMI/DP ELD
  drm/i915: Enable dither whenever display bpc < frame buffer bpc
  drm/i915: Enable dither whenever display bpc < frame buffer bpc

Make sure the device is processing the fifo when these functions are
called in case they might sleep waiting for an event.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Add a way to send DRM events down the gpu fifo by attaching them to
fence objects. This may be useful for Xserver swapbuffer throttling and
page-flip done notifications.

Bump version to 2.2 to signal the availability of the FENCE_EVENT ioctl.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This function will be used also by the upcoming fence event code,
so break it out and add a comment about the functionality.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

If a card wasn't PCIE, we always set the DMA mask to 32 bits.
This is only applies to the old rage128/r1xx gart block on
early radeon asics (~r1xx-r4xx).  Newer PCI and IGP cards
can handle 40 bits just fine.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Chen Jie <chenj@lemote.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The value of RADEON_DEBUGFS_MAX_NUM_FILES has been used to
specify the size of an array, each element of which looks
like this:

  struct radeon_debugfs {
          struct drm_info_list    *files;
          unsigned                num_files;
  };

Consequently, the number of debugfs files may be much greater
than RADEON_DEBUGFS_MAX_NUM_FILES, something that the current
code ignores:

  if ((_radeon_debugfs_count + nfiles) > RADEON_DEBUGFS_MAX_NUM_FILES) {
          DRM_ERROR("Reached maximum number of debugfs files.\n");
          DRM_ERROR("Report so we increase RADEON_DEBUGFS_MAX_NUM_FILES.\n");
          return -EINVAL;
  }

This commit fixes this make, and accordingly renames:

  RADEON_DEBUGFS_MAX_NUM_FILES

to:

  RADEON_DEBUGFS_MAX_COMPONENTS
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

When force == false, we don't do load detection in the connector
detect functions.  Unforunately, we also return the previous
connector state so we never get disconnect events for DVI-I, DVI-A,
or VGA.  Save whether we detected the monitor via load detection
previously and use that to determine whether we return the previous
state or not.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41561Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

DVI-D and HDMI-A are digital only, so there's no need to
attempt analog load detect.  Also, skip bail before the
!force check, or we fail to get a disconnect events.
The next patches in the series attempt to fix disconnect
events for connectors with analog support (DVI-I, HDMI-B,
DVI-A).

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41561Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Commit 9b9fe724 accidentally used RADEON_GPIO_EN_* where
RADEON_GPIO_MASK_* was intended. This caused improper initialization
of I2C buses, mostly visible when setting i2c_algo_bit.bit_test=1.
Using the right constants fixes the problem.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <j.glisse@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Contexts, surfaces and streams allocate persistent kernel memory as the
direct result of user-space requests. Make sure this memory is
accounted as graphics memory, to avoid DOS vulnerabilities.

Also take the TTM read lock around resource creation to block
switched-out dri clients from allocating resources.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This patch is a DRM Driver for Samsung SoC Exynos4210 and now enables
only FIMD yet but we will add HDMI support also in the future.

this patch is based on git repository below:
git://people.freedesktop.org/~airlied/linux.git
branch name: drm-next
commit-id: 88ef4e3f

you can refer to our working repository below:
http://git.infradead.org/users/kmpark/linux-2.6-samsung
branch name: samsung-drm

We tried to re-use lowlevel codes of the FIMD driver(s3c-fb.c
based on Linux framebuffer) but couldn't so because lowlevel codes
of s3c-fb.c are included internally and so FIMD module of this driver has
its own lowlevel codes.

We used GEM framework for buffer management and DMA APIs(dma_alloc_*)
for buffer allocation so we can allocate physically continuous memory
for DMA through it and also we could use CMA later if CMA is applied to
mainline.

Refer to this link for CMA(Continuous Memory Allocator):
http://lkml.org/lkml/2011/7/20/45

this driver supports only physically continuous memory(non-iommu).

Links to previous versions of the patchset:
v1: < https://lwn.net/Articles/454380/ >
v2: < http://www.spinics.net/lists/kernel/msg1224275.html >
v3: < http://www.spinics.net/lists/dri-devel/msg13755.html >
v4: < http://permalink.gmane.org/gmane.comp.video.dri.devel/60439 >
v5: < http://comments.gmane.org/gmane.comp.video.dri.devel/60802 >

Changelog v2:
DRM: add DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl command.

    this feature maps user address space to physical memory region
    once user application requests DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl.

DRM: code clean and add exception codes.

Changelog v3:
DRM: Support multiple irq.

    FIMD and HDMI have their own irq handler but DRM Framework can regiter
    only one irq handler this patch supports mutiple irq for Samsung SoC.

DRM: Consider modularization.

    each DRM, FIMD could be built as a module.

DRM: Have indenpendent crtc object.

    crtc isn't specific to SoC Platform so this patch gets a crtc
    to be used as common object.
    created crtc could be attached to any encoder object.

DRM: code clean and add exception codes.

Changelog v4:
DRM: remove is_defult from samsung_fb.

    is_default isn't used for default framebuffer.

DRM: code refactoring to fimd module.
    this patch is be considered with multiple display objects and
    would use its own request_irq() to register a irq handler instead of
    drm framework's one.

DRM: remove find_samsung_drm_gem_object()

DRM: move kernel private data structures and definitions to driver folder.

    samsung_drm.h would contain only public information for userspace
    ioctl interface.

DRM: code refactoring to gem modules.
    buffer module isn't dependent of gem module anymore.

DRM: fixed security issue.

DRM: remove encoder porinter from specific connector.

    samsung connector doesn't need to have generic encoder.

DRM: code clean and add exception codes.

Changelog v5:
DRM: updated fimd(display controller) driver.
    added various pixel formats, color key and pixel blending features.

DRM: removed end_buf_off from samsung_drm_overlay structure.
    this variable isn't used and end buffer address would be
    calculated by each sub driver.

DRM: use generic function for mmap_offset.
    replaced samsung_drm_gem_create_mmap_offset() and
    samsung_drm_free_mmap_offset() with generic ones applied
    to mainline recentrly.

DRM: removed unnecessary codes and added exception codes.

DRM: added comments and code clean.

Changelog v6:
DRM: added default config options.

DRM: added padding for 64-bit align.

DRM: changed prefix 'samsung' to 'exynos'
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>