Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This should be safe since mmconfig*.o and init.o do not contain
*initcalls with the same level as in other files.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

No functional nor ordering changes here.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

fix:

arch/x86/kernel/acpi/boot.c: In function ‘dmi_ignore_irq0_timer_override’:
arch/x86/kernel/acpi/boot.c:1443: error: implicit declaration of function ‘force_mask_ioapic_irq_2’
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The problems are that, with the ACPI vs timer overring issue _fixed_,
after using the box for some time (between several seconds and 1 hour, at
random) processes get very high CPU loads (once I've got X using 107% of
the CPU, for example) and the system becomes unresponsive, as though there
were interrupts lost or something similar.

Andreas Herrman reproduced similar problems:

> Ok, now I've reproduced the stability problem.
> - Using tip/master,
> - reverting e38502eb8aa82314d5ab0eba45f50e6790dadd88 and
> - applying your patch from this posting
>   http://marc.info/?l=linux-kernel&m=121539354224562&w=4
>
> Starting X, firefox, gimp, tuxpaint and doing some drawing in tuxpaint
> results in a slow system. Drawing is almost not possible anymore --
> Selections of new colors, cursors etc. is performed with huge delay
> if it's performed at all.
>
> BTW, the code sets up timer IRQ as Virtual Wire IRQ:
>
> Jul  8 14:57:58 kodscha IO-APIC (apicid-pin) 2-22, 2-23 not connected.
> Jul  8 14:57:58 kodscha ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> Jul  8 14:57:58 kodscha ...trying to set up timer as Virtual Wire IRQ... works.
>
> and both INT0 and INT2 of IOAPIC are masked:
>
> Jul  8 14:57:58 kodscha NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
> Jul  8 14:57:58 kodscha 00 000 1    0    0   0   0    0    0    00
> Jul  8 14:57:58 kodscha 01 003 0    0    0   0   0    1    1    31
> Jul  8 14:57:58 kodscha 02 003 1    0    0   0   0    0    0    30
>
> I've also seen strange CPU utilization -- with syslog-ng:
>
> top - 15:33:06 up 35 min,  4 users,  load average: 1.70, 0.68, 0.37
> Tasks:  64 total,   4 running,  60 sleeping,   0 stopped,   0 zombie
> Cpu0  :  0.0%us,100.0%sy,  0.0%ni,  0.0%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
> Cpu1  :  6.4%us, 87.2%sy,  0.0%ni,  5.8%id,  0.0%wa,  0.6%hi,  0.0%si,  0.0%st
> Mem:    895384k total,   283568k used,   611816k free,    35492k buffers
> Swap:  1959920k total,        0k used,  1959920k free,   163044k cached
>
>   PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
>  4632 root      20   0 17216  800  580 S  104  0.1   0:34.22 syslog-ng
> 28505 root      20   0  205m  11m 4024 S    6  1.3   0:21.16 X
> 28518 root      20   0 56292 5652 4492 S    1  0.6   0:01.80 fluxbox
>     1 root      20   0  3724  608  508 S    0  0.1   0:00.36 init
>
> So far I have no clue why C1E-idle in conjunction with virtual wire
> mode causes this strange behaviour.
>
> ... and I start to think about the root cause of all this.
>
> I've performed similar tests under X with the IRQ0/INT0 configuration and
> I did not see above symptoms.

So lets fall back to the IRQ0/INT0 configuration on this box.

This basically restores the dont-use-the-lapic-timer exception mechanism
that was unconditional on this box prior commit 8750bf5 ("x86: add C1E
aware idle function").
Signed-off-by: Ingo Molnar <mingo@elte.hu>

handle head and tail that are not aligned to big pages (2MB/1GB boundary).

with this patch, on system that support gbpages, change:

  last_map_addr: 1080000000 end: 1078000000

to:

  last_map_addr: 1078000000 end: 1078000000
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

When system have 4g less ram installed, and acpi table sit
near end of ram, make max_pfn cover them too,
so 64bit kernel don't need to mess up fixmap.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: "Suresh Siddha" <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: "Nick Piggin" <npiggin@suse.de>
Cc: "Mark McLoughlin" <markmc@redhat.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: "Eduardo Habkost" <ehabkost@redhat.com>
Cc: "Vegard Nossum" <vegard.nossum@gmail.com>
Cc: "Stephen Tweedie" <sct@redhat.com>
Cc: "Jeremy Fitzhardinge" <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

prepare for overmapped patch

also printout last_map_addr together with end
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

fix:

 In file included from arch/x86/kernel/tlb_uv.c:14:
 include/asm/uv/uv_mmrs.h:986: error: redefinition of ‘union uvh_rh_gam_cfg_overlay_config_mmr_u’
 include/asm/uv/uv_mmrs.h:988: error: redefinition of ‘struct uvh_rh_gam_cfg_overlay_config_mmr_s’
 include/asm/uv/uv_mmrs.h:1064: error: redefinition of ‘union uvh_rh_gam_mmioh_overlay_config_mmr_u’
 include/asm/uv/uv_mmrs.h:1066: error: redefinition of ‘struct uvh_rh_gam_mmioh_overlay_config_mmr_s’

caused by another duplicate section (cut & paste error) in commit
5d061e39 "x86, uv: update x86 mmr list for SGI uv".
Signed-off-by: Ingo Molnar <mingo@elte.hu>

fix:

In file included from arch/x86/kernel/genx2apic_uv_x.c:25:
include/asm/uv/uv_mmrs.h:986: error: redefinition of ‘union uvh_rh_gam_cfg_overlay_config_mmr_u’
include/asm/uv/uv_mmrs.h:988: error: redefinition of ‘struct uvh_rh_gam_cfg_overlay_config_mmr_s’
include/asm/uv/uv_mmrs.h:1064: error: redefinition of ‘union uvh_rh_gam_mmioh_overlay_config_mmr_u’
include/asm/uv/uv_mmrs.h:1066: error: redefinition of ‘struct uvh_rh_gam_mmioh_overlay_config_mmr_s’

caused by duplicate section (cut & paste error) in commit
5d061e39 "x86, uv: update x86 mmr list for SGI uv".
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/x86/mm/pgtable_32.c:144: warning: 'fixmaps' defined but not used
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/x86/kernel/smpboot.c: In function 'do_boot_cpu':
arch/x86/kernel/smpboot.c:943: warning: label 'restore_state' defined but not used
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

 - order of local variable declarations
 - minor code changes
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

 - local caching of smp_processor_id() in default_do_nmi()
 - v2: do not split default_do_nmi over two lines

On Wed, Jul 02, 2008 at 08:12:20PM +0400, Cyrill Gorcunov wrote:
> | -static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
> | +static notrace __kprobes void
> | +default_do_nmi(struct pt_regs *regs)
> | [ ... ]
> | -asmlinkage notrace  __kprobes void default_do_nmi(struct pt_regs *regs)
> | +asmlinkage notrace __kprobes void
> | +default_do_nmi(struct pt_regs *regs)
>
> Hi Alexander, good done, thanks! But why did you split default_do_nmi
> definition by two lines? I think it would be better to keep them as it
> was before, ie by a single line
>
> 	static notrace __kprobes void default_do_nmi(struct pt_regs *regs)

Thanks! Here is the replacement patch with default_do_nmi left on
a single line.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

 - if (cond) block -> if (!cond) goto end_of_block
 - local caching of current
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

if (cond) block -> if (!cond) goto end_of_block
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

if (cond) block -> if (!cond) goto end_of_block
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Reorder headers and collect globals in traps_32.c and traps_64.c

Code size and data size are unaffected by the changes. Code
itself is changed due to different ordering of data and bss.
The bss segment changed size due to a change in the packing
of the variables.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This patch does not change the generated object files.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Rename the paravirtualized calculate_cpu_khz to calibrate_tsc.
In all cases, we actually calibrate_tsc and use that as the cpu_khz value.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Dan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Unify the clocksource code.
Unify the tsc_init code.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Dan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Unify the TSC cpufreq code.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Dan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge the tsc calibration code for the 32bit and 64bit kernel.
The paravirtualized calculate_cpu_khz for 64bit now points to the correct
tsc_calibrate code as in 32bit.
Original native_calculate_cpu_khz for 64 bit is now called as calibrate_cpu.

Also moved the recalibrate_cpu_khz function in the common file.
Note that this function is called only from powernow K7 cpu freq driver.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Dan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Move the basic global variable definitions and sched_clock handling in the
common "tsc.c" file.

 - Unify notsc kernel command line handling for 32 bit and 64bit.
 - Functional changes for 64bit.
        - "tsc_disabled" is updated if "notsc" is passed at boottime.
        - Fallback to jiffies for sched_clock, incase notsc is passed on
	  commandline.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Dan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add lapic resource into kernel resource map and mark it as busy
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
CC: Maciej W. Rozycki <macro@linux-mips.org>

This patch updates the X86 mmr list for SGI uv.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Create page table entries to map the SGI UV chipset GRU. local MMR &
global MMR ranges.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add boot-time function for creating additional 2MB page table entries for
mapping chipset specific cached/uncached ranges.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

so when it is called after early_param, e820_saved get updated too.
esp for mpc update.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

seperate reserve_setup_data into e820_reserved_setup_data,
and reserve_early_setup_data.

So could use e820_reserved_setup_data to backup e820 with setup_data.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Bernhard Walle <bwalle@suse.de>
Cc: Ying Huang <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

so other path that will override memory_setup or
machine_specific_memory_setup could have e820_saved too.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  SUNRPC: Fix an rpcbind breakage for the case of IPv6 lookups
  SUNRPC: Fix a double-free in rpcbind
  NFS: Fix readdir cache invalidation

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix 32bit kernels on R4k with 128 byte cache line size
  [MIPS] Atlas, decstation: Fix section mismatches triggered by defconfigs

With the removal of struct file from the xattr code,
reiserfs_file_release() isn't used anymore, so the prealloc isn't
discarded.  This causes hangs later down the line.

This patch adds it to reiserfs_delete_inode.  In most cases it will be a
no-op due to it already having been called, but will avoid hangs with
xattrs.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that rpcb_next_version has been split into an IPv4 version and an IPv6
version, we Oops when rpcb_call_async attempts to look up the IPv6-specific
RPC procedure in rpcb_next_version.

Fix the Oops simply by having rpcb_getport_async pass the correct RPC
procedure as an argument.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>