commit 7eb71e03 upstream.

It turns out it's possible to get __remove_osd() called twice on the
same OSD.  That doesn't sit well with rb_erase() - depending on the
shape of the tree we can get a NULL dereference, a soft lockup or
a random crash at some point in the future as we end up touching freed
memory.  One scenario that I was able to reproduce is as follows:

            <osd3 is idle, on the osd lru list>
<con reset - osd3>
con_fault_finish()
  osd_reset()
                              <osdmap - osd3 down>
                              ceph_osdc_handle_map()
                                <takes map_sem>
                                kick_requests()
                                  <takes request_mutex>
                                  reset_changed_osds()
                                    __reset_osd()
                                      __remove_osd()
                                  <releases request_mutex>
                                <releases map_sem>
    <takes map_sem>
    <takes request_mutex>
    __kick_osd_requests()
      __reset_osd()
        __remove_osd() <-- !!!

A case can be made that osd refcounting is imperfect and reworking it
would be a proper resolution, but for now Sage and I decided to fix
this by adding a safe guard around __remove_osd().

Fixes: http://tracker.ceph.com/issues/8087

Cc: Sage Weil <sage@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit cc9f1f51 upstream.

No reason to use BUG_ON for osd request list assertions.
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 7c6e6fc5 upstream.

It is important that both regular and lingering requests lists are
empty when the OSD is removed.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 4b552bc9 upstream.

Add support for the QCA6174 chip.

    T:  Bus=06 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=12  MxCh= 0
    D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=0489 ProdID=e078 Rev=00.01
    C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
    I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: Anantha Krishnan <ananthk@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

[ Upstream commit f798217d ]

The FPU and DSP are enabled via the CP0 Status CU1 and MX bits by
kvm_mips_set_c0_status() on a guest exit, presumably in case there is
active state that needs saving if pre-emption occurs. However neither of
these bits are cleared again when returning to the guest.

This effectively gives the guest access to the FPU/DSP hardware after
the first guest exit even though it is not aware of its presence,
allowing FP instructions in guest user code to intermittently actually
execute instead of trapping into the guest OS for emulation. It will
then read & manipulate the hardware FP registers which technically
belong to the user process (e.g. QEMU), or are stale from another user
process. It can also crash the guest OS by causing an FP exception, for
which a guest exception handler won't have been registered.

First lets save and disable the FPU (and MSA) state with lose_fpu(1)
before entering the guest. This simplifies the problem, especially for
when guest FPU/MSA support is added in the future, and prevents FR=1 FPU
state being live when the FR bit gets cleared for the guest, which
according to the architecture causes the contents of the FPU and vector
registers to become UNPREDICTABLE.

We can then safely remove the enabling of the FPU in
kvm_mips_set_c0_status(), since there should never be any active FPU or
MSA state to save at pre-emption, which should plug the FPU leak.

DSP state is always live rather than being lazily restored, so for that
it is simpler to just clear the MX bit again when re-entering the guest.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Sanjay Lal <sanjayl@kymasys.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # v3.10+: 044f0f03: MIPS: KVM: Deliver guest interrupts
Cc: <stable@vger.kernel.org> # v3.10+: 3ce465e0: MIPS: Export FP functions used by lose_fpu(1) for KVM
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 06f34e1c upstream.

We used to calculate page address differently in 2 cases:

1. In virt_to_page(x) we do
 --->8---
 mem_map + (x - CONFIG_LINUX_LINK_BASE) >> PAGE_SHIFT
 --->8---

2. In in pte_page(x) we do
 --->8---
 mem_map + (pte_val(x) - PAGE_OFFSET) >> PAGE_SHIFT
 --->8---

That leads to problems in case PAGE_OFFSET != CONFIG_LINUX_LINK_BASE -
different pages will be selected depending on where and how we calculate
page address.

In particular in the STAR 9000853582 when gdb attempted to read memory
of another process it got improper page in get_user_pages() because this
is exactly one of the places where we search for a page by pte_page().

The fix is trivial - we need to calculate page address similarly in both
cases.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 14675592 upstream.

The output of KDB 'summary' command should report MemTotal, MemFree
and Buffers output in kB. Current codes report in unit of pages.

A define of K(x) as
is defined in the code, but not used.

This patch would apply the define to convert the values to kB.
Please include me on Cc on replies. I do not subscribe to linux-kernel.
Signed-off-by: Jay Lan <jlan@sgi.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 9bc78f32 upstream.

Add regulator_has_full_constraints() call to poodle board file to let
regulator core know that we do not have any additional regulators left.
This lets it substitute unprovided regulators with dummy ones.

This fixes the following warnings that can be seen on poodle if
regulators are enabled:

ads7846 spi1.0: unable to get regulator: -517
spi spi1.0: Driver ads7846 requests probe deferral
wm8731 0-001b: Failed to get supply 'AVDD': -517
wm8731 0-001b: Failed to request supplies: -517
wm8731 0-001b: ASoC: failed to probe component -517
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 271e8017 upstream.

Add regulator_has_full_constraints() call to corgi board file to let
regulator core know that we do not have any additional regulators left.
This lets it substitute unprovided regulators with dummy ones.

This fixes the following warnings that can be seen on corgi if
regulators are enabled:

ads7846 spi1.0: unable to get regulator: -517
spi spi1.0: Driver ads7846 requests probe deferral
wm8731 0-001b: Failed to get supply 'AVDD': -517
wm8731 0-001b: Failed to request supplies: -517
wm8731 0-001b: ASoC: failed to probe component -517
corgi-audio corgi-audio: ASoC: failed to instantiate card -517
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 19e3ae6b upstream.

The vcs device's poll/fasync support relies on the vt notifier to signal
changes to the screen content.  Notifier invocations were missing for
changes that comes through the selection interface though.  Fix that.

Tested with BRLTTY 5.2.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: Dave Mielke <dave@mielke.cc>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 5efd2ea8 upstream.

the following error pops up during "testusb -a -t 10"
| musb-hdrc musb-hdrc.1.auto: dma_pool_free buffer-128,	f134e000/be842000 (bad dma)
hcd_buffer_create() creates a few buffers, the smallest has 32 bytes of
size. ARCH_KMALLOC_MINALIGN is set to 64 bytes. This combo results in
hcd_buffer_alloc() returning memory which is 32 bytes aligned and it
might by identified by buffer_offset() as another buffer. This means the
buffer which is on a 32 byte boundary will not get freed, instead it
tries to free another buffer with the error message.

This patch fixes the issue by creating the smallest DMA buffer with the
size of ARCH_KMALLOC_MINALIGN (or 32 in case ARCH_KMALLOC_MINALIGN is
smaller). This might be 32, 64 or even 128 bytes. The next three pools
will have the size 128, 512 and 2048.
In case the smallest pool is 128 bytes then we have only three pools
instead of four (and zero the first entry in the array).
The last pool size is always 2048 bytes which is the assumed PAGE_SIZE /
2 of 4096. I doubt it makes sense to continue using PAGE_SIZE / 2 where
we would end up with 8KiB buffer in case we have 16KiB pages.
Instead I think it makes sense to have a common size(s) and extend them
if there is need to.
There is a BUILD_BUG_ON() now in case someone has a minalign of more than
128 bytes.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit c9919790 upstream.

The usb_hcd_unlink_urb() routine in hcd.c contains two possible
use-after-free errors.  The dev_dbg() statement at the end of the
routine dereferences urb and urb->dev even though both structures may
have been deallocated.

This patch fixes the problem by storing urb->dev in a local variable
(avoiding the dereference of urb) and moving the dev_dbg() up before
the usb_put_dev() call.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit a6f03312 upstream.

Added the USB serial console device ID for Siemens Ruggedcom devices
which have a USB port for their serial console.
Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 6fbb9bdf upstream.

-EDEFER error wasn't handle properly by atmel_serial_probe().
As an example, when atmel_serial_probe() is called for the first time, we pass
the test_and_set_bit() test to check whether the port has already been
initalized. Then we call atmel_init_port(), which may return -EDEFER, possibly
returned before by clk_get(). Consequently atmel_serial_probe() used to return
this error code WITHOUT clearing the port bit in the "atmel_ports_in_use" mask.
When atmel_serial_probe() was called for the second time, it used to fail on
the test_and_set_bit() function then returning -EBUSY.

When atmel_serial_probe() fails, this patch make it clear the port bit in the
"atmel_ports_in_use" mask, if needed, before returning the error code.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 37480a05 upstream.

Commit 26df6d13 ("tty: Add EXTPROC support for LINEMODE")
allows a process which has opened a pty master to send _any_ signal
to the process group of the pty slave. Although potentially
exploitable by a malicious program running a setuid program on
a pty slave, it's unknown if this exploit currently exists.

Limit to signals actually used.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Howard Chu <hyc@symas.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 91117a20 upstream.

The 'pfn' returned by axonram was completely bogus, and has been since
2008.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit c6ce1943 upstream.

Hi,

If you can manage to submit an async write as the first async I/O from
the context of a process with realtime scheduling priority, then a
cfq_queue is allocated, but filed into the wrong async_cfqq bucket.  It
ends up in the best effort array, but actually has realtime I/O
scheduling priority set in cfqq->ioprio.

The reason is that cfq_get_queue assumes the default scheduling class and
priority when there is no information present (i.e. when the async cfqq
is created):

static struct cfq_queue *
cfq_get_queue(struct cfq_data *cfqd, bool is_sync, struct cfq_io_cq *cic,
	      struct bio *bio, gfp_t gfp_mask)
{
	const int ioprio_class = IOPRIO_PRIO_CLASS(cic->ioprio);
	const int ioprio = IOPRIO_PRIO_DATA(cic->ioprio);

cic->ioprio starts out as 0, which is "invalid".  So, class of 0
(IOPRIO_CLASS_NONE) is passed to cfq_async_queue_prio like so:

		async_cfqq = cfq_async_queue_prio(cfqd, ioprio_class, ioprio);

static struct cfq_queue **
cfq_async_queue_prio(struct cfq_data *cfqd, int ioprio_class, int ioprio)
{
        switch (ioprio_class) {
        case IOPRIO_CLASS_RT:
                return &cfqd->async_cfqq[0][ioprio];
        case IOPRIO_CLASS_NONE:
                ioprio = IOPRIO_NORM;
                /* fall through */
        case IOPRIO_CLASS_BE:
                return &cfqd->async_cfqq[1][ioprio];
        case IOPRIO_CLASS_IDLE:
                return &cfqd->async_idle_cfqq;
        default:
                BUG();
        }
}

Here, instead of returning a class mapped from the process' scheduling
priority, we get back the bucket associated with IOPRIO_CLASS_BE.

Now, there is no queue allocated there yet, so we create it:

		cfqq = cfq_find_alloc_queue(cfqd, is_sync, cic, bio, gfp_mask);

That function ends up doing this:

			cfq_init_cfqq(cfqd, cfqq, current->pid, is_sync);
			cfq_init_prio_data(cfqq, cic);

cfq_init_cfqq marks the priority as having changed.  Then, cfq_init_prio
data does this:

	ioprio_class = IOPRIO_PRIO_CLASS(cic->ioprio);
	switch (ioprio_class) {
	default:
		printk(KERN_ERR "cfq: bad prio %x\n", ioprio_class);
	case IOPRIO_CLASS_NONE:
		/*
		 * no prio set, inherit CPU scheduling settings
		 */
		cfqq->ioprio = task_nice_ioprio(tsk);
		cfqq->ioprio_class = task_nice_ioclass(tsk);
		break;

So we basically have two code paths that treat IOPRIO_CLASS_NONE
differently, which results in an RT async cfqq filed into a best effort
bucket.

Attached is a patch which fixes the problem.  I'm not sure how to make
it cleaner.  Suggestions would be welcome.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 69abaffe upstream.

Cfq_lookup_create_cfqg() allocates struct blkcg_gq using GFP_ATOMIC.
In cfq_find_alloc_queue() possible allocation failure is not handled.
As a result kernel oopses on NULL pointer dereference when
cfq_link_cfqq_cfqg() calls cfqg_get() for NULL pointer.

Bug was introduced in v3.5 in commit cd1604fa ("blkcg: factor
out blkio_group creation"). Prior to that commit cfq group lookup
had returned pointer to root group as fallback.

This patch handles this error using existing fallback oom_cfqq.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Fixes: cd1604fa ("blkcg: factor out blkio_group creation")
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 3fd7b60f upstream.

This patch drops legacy active_ts_list usage within iscsi_target_tq.c
code.  It was originally used to track the active thread sets during
iscsi-target shutdown, and is no longer used by modern upstream code.

Two people have reported list corruption using traditional iscsi-target
and iser-target with the following backtrace, that appears to be related
to iscsi_thread_set->ts_list being used across both active_ts_list and
inactive_ts_list.

[   60.782534] ------------[ cut here ]------------
[   60.782543] WARNING: CPU: 0 PID: 9430 at lib/list_debug.c:53 __list_del_entry+0x63/0xd0()
[   60.782545] list_del corruption, ffff88045b00d180->next is LIST_POISON1 (dead000000100100)
[   60.782546] Modules linked in: ib_srpt tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc scsi_tgt ib_isert rdma_cm iw_cm ib_addr iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc autofs4 sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ib_ipoib ib_cm ib_uverbs ib_umad mlx4_en mlx4_ib ib_sa ib_mad ib_core mlx4_core dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan vhost tun kvm_intel kvm uinput iTCO_wdt iTCO_vendor_support microcode serio_raw pcspkr sb_edac edac_core sg i2c_i801 lpc_ich mfd_core mtip32xx igb i2c_algo_bit i2c_core ptp pps_core ioatdma dca wmi ext3(F) jbd(F) mbcache(F) sd_mod(F) crc_t10dif(F) crct10dif_common(F) ahci(F) libahci(F) isci(F) libsas(F) scsi_transport_sas(F) [last unloaded: speedstep_lib]
[   60.782597] CPU: 0 PID: 9430 Comm: iscsi_ttx Tainted: GF 3.12.19+ #2
[   60.782598] Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013
[   60.782599]  0000000000000035 ffff88044de31d08 ffffffff81553ae7 0000000000000035
[   60.782602]  ffff88044de31d58 ffff88044de31d48 ffffffff8104d1cc 0000000000000002
[   60.782605]  ffff88045b00d180 ffff88045b00d0c0 ffff88045b00d0c0 ffff88044de31e58
[   60.782607] Call Trace:
[   60.782611]  [<ffffffff81553ae7>] dump_stack+0x49/0x62
[   60.782615]  [<ffffffff8104d1cc>] warn_slowpath_common+0x8c/0xc0
[   60.782618]  [<ffffffff8104d2b6>] warn_slowpath_fmt+0x46/0x50
[   60.782620]  [<ffffffff81280933>] __list_del_entry+0x63/0xd0
[   60.782622]  [<ffffffff812809b1>] list_del+0x11/0x40
[   60.782630]  [<ffffffffa06e7cf9>] iscsi_del_ts_from_active_list+0x29/0x50 [iscsi_target_mod]
[   60.782635]  [<ffffffffa06e87b1>] iscsi_tx_thread_pre_handler+0xa1/0x180 [iscsi_target_mod]
[   60.782642]  [<ffffffffa06fb9ae>] iscsi_target_tx_thread+0x4e/0x220 [iscsi_target_mod]
[   60.782647]  [<ffffffffa06fb960>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[   60.782652]  [<ffffffffa06fb960>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[   60.782655]  [<ffffffff8106f99e>] kthread+0xce/0xe0
[   60.782657]  [<ffffffff8106f8d0>] ? kthread_freezable_should_stop+0x70/0x70
[   60.782660]  [<ffffffff8156026c>] ret_from_fork+0x7c/0xb0
[   60.782662]  [<ffffffff8106f8d0>] ? kthread_freezable_should_stop+0x70/0x70
[   60.782663] ---[ end trace 9662f4a661d33965 ]---

Since this code is no longer used, go ahead and drop the problematic usage
all-together.
Reported-by: Gavin Guo <gavin.guo@canonical.com>
Reported-by: Moussa Ba <moussaba@micron.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit d8ba1f97 upstream.

If the call to decode_rc_list() fails due to a memory allocation error,
then we need to truncate the array size to ensure that we only call
kfree() on those pointer that were allocated.
Reported-by: David Ramos <daramos@stanford.edu>
Fixes: 4aece6a1 ("nfs41: cb_sequence xdr implementation")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit eb71f8a5 upstream.

The tpm_ibmvtpm module is affected by an unaligned access problem.
ibmvtpm_crq_get_version failed with rc=-4 during boot when vTPM is
enabled in Power partition, which supports both little endian and
big endian modes.

We added little endian support to fix this problem:
1) added cpu_to_be64 calls to ensure BE data is sent from an LE OS.
2) added be16_to_cpu and be32_to_cpu calls to make sure data received
   is in LE format on a LE OS.
Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com>
Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
[phuewe: manually applied the patch :( ]
Reviewed-by: Ashley Lai <ashley@ahsleylai.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 1ba3b0b6 upstream.

When sending data in tpm_stm_i2c_send, each loop iteration send buf.
Send buf + i instead as the goal of this for loop is to send a number
of byte from buf that fit in burstcnt. Once those byte are sent, we are
supposed to send the next ones.

The driver was working because the burstcount value returns always the maximum size for a TPM
command or response. (0x800 for a command and 0x400 for a response).
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 84eb186b upstream.

There was an oops in tpm_ibmvtpm_get_desired_dma, which caused
kernel panic during boot when vTPM is enabled in Power partition
configured in AMS mode.

vio_bus_probe calls vio_cmo_bus_probe which calls
tpm_ibmvtpm_get_desired_dma to get the size needed for DMA allocation.
The problem is, vio_cmo_bus_probe is called before calling probe, which
for vtpm is tpm_ibmvtpm_probe and it's this function that initializes
and sets up vtpm's CRQ and gets required data values.  Therefore,
since this has not yet been done, NULL is returned in attempt to get
the size for DMA allocation.

We added a NULL check.  In addition, a default buffer size will
be set when NULL is returned.
Signed-off-by: Hon Ching (Vicky) Lo <honclo@linux.vnet.ibm.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 398a1e71 upstream.

Add newly registered TPMs to the tail of the list, not the beginning, so that
things that are specifying TPM_ANY_NUM don't find that the device they're
using has inadvertently changed.  Adding a second device would break IMA, for
instance.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 448e9c55 upstream.

Some machines, such as the Acer C720 and Toshiba CB35, have TPMs that do
not send IRQs while also having an ACPI TPM entry indicating that they
will be sent. These machines freeze on resume while the tpm_tis module
waits for an IRQ, eventually timing out.

When in interrupt mode, the tpm_tis module should receive an IRQ during
module init. Fall back to polling mode if none is received when expected.
Signed-off-by: Scot Doyle <lkml14@scotdoyle.com>
Tested-by: Michael Mullin <masmullin@gmail.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
[phuewe: minor checkpatch fixed]
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 67fd14b3 upstream.

Fixes: http://bugs.elinux.org/issues/127

the bb.org community was seeing random reboots before this change.
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 1c7e36bf upstream.

With commit '7dedd346: ARM: OMAP2+: hwmod: Fix a crash in _setup_reset()
with DEBUG_LL' we moved from parsing cmdline to identify uart used
for earlycon to using the requsite hwmod CONFIG_DEBUG_OMAPxUARTy FLAGS.

On DRA7 UART3 hwmod doesn't have this flag enabled, and atleast on
BeagleBoard-X15, where we use UART3 for console, boot fails with
DEBUG_LL enabled. Enable DEBUG_OMAP4UART3_FLAGS for UART3 hwmod.

For using DEBUG_LL, enable CONFIG_DEBUG_OMAP4UART3 in menuconfig.

Fixes: 90020c7b ("ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data")
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit e461894d upstream.

StrongARM core uses RCSR SMR bit to tell to bootloader that it was reset
by entering the sleep mode. After we have resumed, there is little point
in having that bit enabled. Moreover, if this bit is set before reboot,
the bootloader can become confused. Thus clear the SMR bit on resume
just before clearing the scratchpad (resume address) register.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 7215853e upstream.

Commit 6edb2a8a introduced
an array map_pages that contains the addresses returned by
kmap_atomic. However, when unmapping those pages, map_pages[0]
is unmapped before map_pages[1], breaking the nesting requirement
as specified in the documentation for kmap_atomic/kunmap_atomic.

This was caught by the highmem debug code present in kunmap_atomic.
Fix the loop to do the unmapping properly.

Link: http://lkml.kernel.org/r/1418871056-6614-1-git-send-email-markivx@codeaurora.orgReviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Reported-by: Lime Yang <limey@codeaurora.org>
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit cbef8478 upstream.

Migrating hugepages and hwpoisoned hugepages are considered as non-present
hugepages, and they are referenced via migration entries and hwpoison
entries in their page table slots.

This behavior causes race condition because pmd_huge() doesn't tell
non-huge pages from migrating/hwpoisoned hugepages.  follow_page_mask() is
one example where the kernel would call follow_page_pte() for such
hugepage while this function is supposed to handle only normal pages.

To avoid this, this patch makes pmd_huge() return true when pmd_none() is
true *and* pmd_present() is false.  We don't have to worry about mixing up
non-present pmd entry with normal pmd (pointing to leaf level pte entry)
because pmd_present() is true in normal pmd.

The same race condition could happen in (x86-specific) gup_pmd_range(),
where this patch simply adds pmd_present() check instead of pmd_huge().
This is because gup_pmd_range() is fast path.  If we have non-present
hugepage in this function, we will go into gup_huge_pmd(), then return 0
at flag mask check, and finally fall back to the slow path.

Fixes: 290408d4 ("hugetlb: hugepage migration core")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 044f0f03 upstream.

When about to run the guest, deliver guest interrupts after disabling
host interrupts. This should prevent an hrtimer interrupt from being
handled after delivering guest interrupts, and therefore not delivering
the guest timer interrupt until after the next guest exit.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 6ffa30d3 upstream.

Bruce reported seeing this warning pop when mounting using v4.1:

     ------------[ cut here ]------------
     WARNING: CPU: 1 PID: 1121 at kernel/sched/core.c:7300 __might_sleep+0xbd/0xd0()
    do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff810ff58f>] prepare_to_wait+0x2f/0x90
    Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc fscache ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer ppdev joydev snd virtio_console virtio_balloon pcspkr serio_raw parport_pc parport pvpanic floppy soundcore i2c_piix4 virtio_blk virtio_net qxl drm_kms_helper ttm drm virtio_pci virtio_ring ata_generic virtio pata_acpi
    CPU: 1 PID: 1121 Comm: nfsv4.1-svc Not tainted 3.19.0-rc4+ #25
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153950- 04/01/2014
     0000000000000000 000000004e5e3f73 ffff8800b998fb48 ffffffff8186ac78
     0000000000000000 ffff8800b998fba0 ffff8800b998fb88 ffffffff810ac9da
     ffff8800b998fb68 ffffffff81c923e7 00000000000004d9 0000000000000000
    Call Trace:
     [<ffffffff8186ac78>] dump_stack+0x4c/0x65
     [<ffffffff810ac9da>] warn_slowpath_common+0x8a/0xc0
     [<ffffffff810aca65>] warn_slowpath_fmt+0x55/0x70
     [<ffffffff810ff58f>] ? prepare_to_wait+0x2f/0x90
     [<ffffffff810ff58f>] ? prepare_to_wait+0x2f/0x90
     [<ffffffff810dd2ad>] __might_sleep+0xbd/0xd0
     [<ffffffff8124c973>] kmem_cache_alloc_trace+0x243/0x430
     [<ffffffff810d941e>] ? groups_alloc+0x3e/0x130
     [<ffffffff810d941e>] groups_alloc+0x3e/0x130
     [<ffffffffa0301b1e>] svcauth_unix_accept+0x16e/0x290 [sunrpc]
     [<ffffffffa0300571>] svc_authenticate+0xe1/0xf0 [sunrpc]
     [<ffffffffa02fc564>] svc_process_common+0x244/0x6a0 [sunrpc]
     [<ffffffffa02fd044>] bc_svc_process+0x1c4/0x260 [sunrpc]
     [<ffffffffa03d5478>] nfs41_callback_svc+0x128/0x1f0 [nfsv4]
     [<ffffffff810ff970>] ? wait_woken+0xc0/0xc0
     [<ffffffffa03d5350>] ? nfs4_callback_svc+0x60/0x60 [nfsv4]
     [<ffffffff810d45bf>] kthread+0x11f/0x140
     [<ffffffff810ea815>] ? local_clock+0x15/0x30
     [<ffffffff810d44a0>] ? kthread_create_on_node+0x250/0x250
     [<ffffffff81874bfc>] ret_from_fork+0x7c/0xb0
     [<ffffffff810d44a0>] ? kthread_create_on_node+0x250/0x250
    ---[ end trace 675220a11e30f4f2 ]---

nfs41_callback_svc does most of its work while in TASK_INTERRUPTIBLE,
which is just wrong. Fix that by finishing the wait immediately if we've
found that the list has something on it.

Also, we don't expect this kthread to accept signals, so we should be
using a TASK_UNINTERRUPTIBLE sleep instead. That however, opens us up
hung task warnings from the watchdog, so have the schedule_timeout
wake up every 60s if there's no callback activity.
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 14460dba upstream.

Current code checks "clk_delay_cycles > 0" to know whether the optional
"mrvl,clk_delay_cycles" is set or not. But of_property_read_u32() doesn't
touch clk_delay_cycles if the property is not set. And type of
clk_delay_cycles is u32, so we may always set pdata->clk_delay_cycles as a
random value.

This patch fix this problem by check the return value of of_property_read_u32()
to know whether the optional clk-delay-cycles is set or not.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit c2ced171 upstream.

Update driver "mask_interrupts" before enable/disable hardware interrupt
in order to avoid missing interrupts because of "mask_interrupts" still
set to 1 and hardware interrupts are enabled.
Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: Chaitra Basappa <chaitra.basappa@avagotech.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 478913fd upstream.

The driver mismatched 'num_supplicants' with 'num_supplies' of
power_supply structure.

It provided list of supplicants (power_supply.supplied_to) but did
not set the number of supplicants. Instead it set the num_supplies which
is used when iterating over number of supplies (power_supply.supplied_from).

As a result the list of supplicants was ignored by core because its size
was 0.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 24727b45 upstream.

Driver forgot to unregister power supply if request_threaded_irq()
failed in probe(). In such case the memory associated with power supply
leaked.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: a830d28b ("power_supply: Enable battery-charger for 88pm860x")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit f0153c3d upstream.

RME RayDAT and AIO use a fixed buffer size of 16384 samples. With period
sizes of 32-4096, this translates to 4-512 periods.

The older RME cards have a variable buffer size but require exactly two
periods.

This patch enforces nperiods=2 on those cards.
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit e4940626 upstream.

The problem here is that we check:

	if (dev >= SNDRV_CARDS)

Then we increment "dev".

       if (!joystick_port[dev++])

Then we use it as an offset into a array with SNDRV_CARDS elements.

	if (!request_region(joystick_port[dev], 8, "Riptide gameport")) {

This has 3 effects:
1) If you use the module option to specify the joystick port then it has
   to be shifted one space over.
2) The wrong error message will be printed on failure if you have over
   32 cards.
3) Static checkers will correctly complain that are off by one.

Fixes: db1005ec ('ALSA: riptide - Fix joystick resource handling')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 15e1ce33 upstream.

A quirk of some older firmwares that report endpoint pipe type as PIPE_BULK
but the endpoint otheriwse functions as interrupt.

Check if usb_endpoint_type is USB_ENDPOINT_XFER_BULK and set as usb_rcvbulkpipe.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 72978b2f upstream.

Commit 61a734d3 ("xen/manage: Always freeze/thaw processes when
suspend/resuming") ensured that userspace processes were always frozen
before suspending to reduce interaction issues when resuming devices.
However, freeze_processes() does not freeze kernel threads.  Freeze
kernel threads as well to prevent deadlocks with the khubd thread when
resuming devices.

This is what native suspend and resume does.

Example deadlock:
[ 7279.648010]  [<ffffffff81446bde>] ? xen_poll_irq_timeout+0x3e/0x50
[ 7279.648010]  [<ffffffff81448d60>] xen_poll_irq+0x10/0x20
[ 7279.648010]  [<ffffffff81011723>] xen_lock_spinning+0xb3/0x120
[ 7279.648010]  [<ffffffff810115d1>] __raw_callee_save_xen_lock_spinning+0x11/0x20
[ 7279.648010]  [<ffffffff815620b6>] ? usb_control_msg+0xe6/0x120
[ 7279.648010]  [<ffffffff81747e50>] ? _raw_spin_lock_irq+0x50/0x60
[ 7279.648010]  [<ffffffff8174522c>] wait_for_completion+0xac/0x160
[ 7279.648010]  [<ffffffff8109c520>] ? try_to_wake_up+0x2c0/0x2c0
[ 7279.648010]  [<ffffffff814b60f2>] dpm_wait+0x32/0x40
[ 7279.648010]  [<ffffffff814b6eb0>] device_resume+0x90/0x210
[ 7279.648010]  [<ffffffff814b7d71>] dpm_resume+0x121/0x250
[ 7279.648010]  [<ffffffff8144c570>] ? xenbus_dev_request_and_reply+0xc0/0xc0
[ 7279.648010]  [<ffffffff814b80d5>] dpm_resume_end+0x15/0x30
[ 7279.648010]  [<ffffffff81449fba>] do_suspend+0x10a/0x200
[ 7279.648010]  [<ffffffff8144a2f0>] ? xen_pre_suspend+0x20/0x20
[ 7279.648010]  [<ffffffff8144a1d0>] shutdown_handler+0x120/0x150
[ 7279.648010]  [<ffffffff8144c60f>] xenwatch_thread+0x9f/0x160
[ 7279.648010]  [<ffffffff810ac510>] ? finish_wait+0x80/0x80
[ 7279.648010]  [<ffffffff8108d189>] kthread+0xc9/0xe0
[ 7279.648010]  [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80
[ 7279.648010]  [<ffffffff8175087c>] ret_from_fork+0x7c/0xb0
[ 7279.648010]  [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80

[ 7441.216287] INFO: task khubd:89 blocked for more than 120 seconds.
[ 7441.219457]       Tainted: G            X 3.13.11-ckt12.kz #1
[ 7441.222176] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 7441.225827] khubd           D ffff88003f433440     0    89      2 0x00000000
[ 7441.229258]  ffff88003ceb9b98 0000000000000046 ffff88003ce83000 0000000000013440
[ 7441.232959]  ffff88003ceb9fd8 0000000000013440 ffff88003cd13000 ffff88003ce83000
[ 7441.236658]  0000000000000286 ffff88003d3e0000 ffff88003ceb9bd0 00000001001aa01e
[ 7441.240415] Call Trace:
[ 7441.241614]  [<ffffffff817442f9>] schedule+0x29/0x70
[ 7441.243930]  [<ffffffff81743406>] schedule_timeout+0x166/0x2c0
[ 7441.246681]  [<ffffffff81075b80>] ? call_timer_fn+0x110/0x110
[ 7441.249339]  [<ffffffff8174357e>] schedule_timeout_uninterruptible+0x1e/0x20
[ 7441.252644]  [<ffffffff81077710>] msleep+0x20/0x30
[ 7441.254812]  [<ffffffff81555f00>] hub_port_reset+0xf0/0x580
[ 7441.257400]  [<ffffffff81558465>] hub_port_init+0x75/0xb40
[ 7441.259981]  [<ffffffff814bb3c9>] ? update_autosuspend+0x39/0x60
[ 7441.262817]  [<ffffffff814bb4f0>] ? pm_runtime_set_autosuspend_delay+0x50/0xa0
[ 7441.266212]  [<ffffffff8155a64a>] hub_thread+0x71a/0x1750
[ 7441.268728]  [<ffffffff810ac510>] ? finish_wait+0x80/0x80
[ 7441.271272]  [<ffffffff81559f30>] ? usb_port_resume+0x670/0x670
[ 7441.274067]  [<ffffffff8108d189>] kthread+0xc9/0xe0
[ 7441.276305]  [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80
[ 7441.279131]  [<ffffffff8175087c>] ret_from_fork+0x7c/0xb0
[ 7441.281659]  [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>