- 26 May, 2015 3 commits
-
-
Krzysztof Kozlowski authored
commit 68c3ed6f upstream. The return value of power_supply_register() call was not checked and even on error probe() function returned 0. If registering failed then during unbind the driver tried to unregister power supply which was not actually registered. This could lead to memory corruption because power_supply_unregister() unconditionally cleans up given power supply. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: da0a00eb ("power: Add twl4030_madc battery driver.") Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Alexander Ploumistos authored
commit 2eeff0b4 upstream. Add 04f2:aff1 to ath3k.c supported devices list and btusb.c blacklist, so that the device can load the ath3k firmware and re-enumerate itself as an AR3011 device. T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04f2 ProdID=aff1 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Alexander Ploumistos <alexpl@fedoraproject.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Kamal Mostafa authored
This reverts commit 06b1d865. This commit is not suitable for 3.13-stable; dev_consume_skb_any() does not exist. Signed-off-by:
-
- 08 May, 2015 1 commit
-
-
Kamal Mostafa authored
Signed-off-by:
-
- 05 May, 2015 36 commits
-
-
David S. Miller authored
[ Upstream commit a134f083 ] If we don't do that, then the poison value is left in the ->pprev backlink. This can cause crashes if we do a disconnect, followed by a connect(). Tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Reported-by:
Wen Xu <hotdog3645@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2ea2f62c ] When I added pfmemalloc support in build_skb(), I forgot netlink was using build_skb() with a vmalloc() area. In this patch I introduce __build_skb() for netlink use, and build_skb() is a wrapper handling both skb->head_frag and skb->pfmemalloc This means netlink no longer has to hack skb->head_frag [ 1567.700067] kernel BUG at arch/x86/mm/physaddr.c:26! [ 1567.700067] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [ 1567.700067] Dumping ftrace buffer: [ 1567.700067] (ftrace buffer empty) [ 1567.700067] Modules linked in: [ 1567.700067] CPU: 9 PID: 16186 Comm: trinity-c182 Not tainted 4.0.0-next-20150424-sasha-00037-g4796e21 #2167 [ 1567.700067] task: ffff880127efb000 ti: ffff880246770000 task.ti: ffff880246770000 [ 1567.700067] RIP: __phys_addr (arch/x86/mm/physaddr.c:26 (discriminator 3)) [ 1567.700067] RSP: 0018:ffff8802467779d8 EFLAGS: 00010202 [ 1567.700067] RAX: 000041000ed8e000 RBX: ffffc9008ed8e000 RCX: 000000000000002c [ 1567.700067] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffffb3fd6049 [ 1567.700067] RBP: ffff8802467779f8 R08: 0000000000000019 R09: ffff8801d0168000 [ 1567.700067] R10: ffff8801d01680c7 R11: ffffed003a02d019 R12: ffffc9000ed8e000 [ 1567.700067] R13: 0000000000000f40 R14: 0000000000001180 R15: ffffc9000ed8e000 [ 1567.700067] FS: 00007f2a7da3f700(0000) GS:ffff8801d1000000(0000) knlGS:0000000000000000 [ 1567.700067] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1567.700067] CR2: 0000000000738308 CR3: 000000022e329000 CR4: 00000000000007e0 [ 1567.700067] Stack: [ 1567.700067] ffffc9000ed8e000 ffff8801d0168000 ffffc9000ed8e000 ffff8801d0168000 [ 1567.700067] ffff880246777a28 ffffffffad7c0a21 0000000000001080 ffff880246777c08 [ 1567.700067] ffff88060d302e68 ffff880246777b58 ffff880246777b88 ffffffffad9a6821 [ 1567.700067] Call Trace: [ 1567.700067] build_skb (include/linux/mm.h:508 net/core/skbuff.c:316) [ 1567.700067] netlink_sendmsg (net/netlink/af_netlink.c:1633 net/netlink/af_netlink.c:2329) [ 1567.774369] ? sched_clock_cpu (kernel/sched/clock.c:311) [ 1567.774369] ? netlink_unicast (net/netlink/af_netlink.c:2273) [ 1567.774369] ? netlink_unicast (net/netlink/af_netlink.c:2273) [ 1567.774369] sock_sendmsg (net/socket.c:614 net/socket.c:623) [ 1567.774369] sock_write_iter (net/socket.c:823) [ 1567.774369] ? sock_sendmsg (net/socket.c:806) [ 1567.774369] __vfs_write (fs/read_write.c:479 fs/read_write.c:491) [ 1567.774369] ? get_lock_stats (kernel/locking/lockdep.c:249) [ 1567.774369] ? default_llseek (fs/read_write.c:487) [ 1567.774369] ? vtime_account_user (kernel/sched/cputime.c:701) [ 1567.774369] ? rw_verify_area (fs/read_write.c:406 (discriminator 4)) [ 1567.774369] vfs_write (fs/read_write.c:539) [ 1567.774369] SyS_write (fs/read_write.c:586 fs/read_write.c:577) [ 1567.774369] ? SyS_read (fs/read_write.c:577) [ 1567.774369] ? __this_cpu_preempt_check (lib/smp_processor_id.c:63) [ 1567.774369] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2594 kernel/locking/lockdep.c:2636) [ 1567.774369] ? trace_hardirqs_on_thunk (arch/x86/lib/thunk_64.S:42) [ 1567.774369] system_call_fastpath (arch/x86/kernel/entry_64.S:261) Fixes: 79930f58 ("net: do not deplete pfmemalloc reserve") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 79930f58 ] build_skb() should look at the page pfmemalloc status. If set, this means page allocator allocated this page in the expectation it would help to free other pages. Networking stack can do that only if skb->pfmemalloc is also set. Also, we must refrain using high order pages from the pfmemalloc reserve, so __page_frag_refill() must also use __GFP_NOMEMALLOC for them. Under memory pressure, using order-0 pages is probably the best strategy. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 845704a5 ] Presence of an unbound loop in tcp_send_fin() had always been hard to explain when analyzing crash dumps involving gigantic dying processes with millions of sockets. Lets try a different strategy : In case of memory pressure, try to add the FIN flag to last packet in write queue, even if packet was already sent. TCP stack will be able to deliver this FIN after a timeout event. Note that this FIN being delivered by a retransmit, it also carries a Push flag given our current implementation. By checking sk_under_memory_pressure(), we anticipate that cooking many FIN packets might deplete tcp memory. In the case we could not allocate a packet, even with __GFP_WAIT allocation, then not sending a FIN seems quite reasonable if it allows to get rid of this socket, free memory, and not block the process from eventually doing other useful work. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d83769a5 ] Using sk_stream_alloc_skb() in tcp_send_fin() is dangerous in case a huge process is killed by OOM, and tcp_mem[2] is hit. To be able to free memory we need to make progress, so this patch allows FIN packets to not care about tcp_mem[2], if skb allocation succeeded. In a follow-up patch, we might abort tcp_send_fin() infinite loop in case TIF_MEMDIE is set on this thread, as memory allocator did its best getting extra memory already. This patch reverts d22e1537 ("tcp: fix tcp fin memory accounting") Fixes: d22e1537 ("tcp: fix tcp fin memory accounting") Signed-off-by:
-
Sebastian Pöhn authored
[ Upstream commit 2ab95749 ] Initial discussion was: [FYI] xfrm: Don't lookup sk_policy for timewait sockets Forwarded frames should not have a socket attached. Especially tw sockets will lead to panics later-on in the stack. This was observed with TPROXY assigning a tw socket and broken policy routing (misconfigured). As a result frame enters forwarding path instead of input. We cannot solve this in TPROXY as it cannot know that policy routing is broken. v2: Remove useless comment Signed-off-by:
Sebastian Poehn <sebastian.poehn@gmail.com> Signed-off-by:
-
Eric W. Biederman authored
commit c9974ad4 upstream. netpoll can call functions in hard irq context that are ordinarily called in lesser contexts. For those functions use dev_kfree_skb_any and dev_consume_skb_any so skbs are freed safely from hard irq context. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit d8ec2c02 upstream. Replace free_skb with dev_kfree_skb_any in be_tx_compl_process as which can be called in hard irq by netpoll, softirq context by normal napi polling, and in normal sleepable context by the network device close method. Signed-off-by:
-
Eric W. Biederman authored
commit f7e79913 upstream. Replace dev_kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by:
-
Eric W. Biederman authored
commit 497a27b9 upstream. Replace dev_kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by:
-
Eric W. Biederman authored
commit f458b2ee upstream. Replace dev_kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by:
-
Eric W. Biederman authored
commit 2bb77ab4 upstream. Replace kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by:
-
Eric W. Biederman authored
commit 989c9ba1 upstream. Replace dev_kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by:
-
Eric W. Biederman authored
commit a2ccd2e4 upstream. Replace dev_kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by:
-
Eric W. Biederman authored
commit 508f81d5 upstream. Replace kfree_skb with dev_kfree_skb_any in cp_start_xmit as it can be called in both hard irq and other contexts. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit b50edd78 ] I noticed tcpdump was giving funky timestamps for locally generated SYNACK messages on loopback interface. 11:42:46.938990 IP 127.0.0.1.48245 > 127.0.0.2.23850: S 945476042:945476042(0) win 43690 <mss 65495,nop,nop,sackOK,nop,wscale 7> 20:28:58.502209 IP 127.0.0.2.23850 > 127.0.0.1.48245: S 3160535375:3160535375(0) ack 945476043 win 43690 <mss 65495,nop,nop,sackOK,nop,wscale 7> This is because we need to clear skb->tstamp before entering lower stack, otherwise net_timestamp_check() does not set skb->tstamp. Fixes: 7faee5c0 ("tcp: remove TCP_SKB_CB(skb)->when") Signed-off-by:
-
hannes@stressinduktion.org authored
[ Upstream commit f60e5990 ] We should not consult skb->sk for output decisions in xmit recursion levels > 0 in the stack. Otherwise local socket settings could influence the result of e.g. tunnel encapsulation process. ipv6 does not conform with this in three places: 1) ip6_fragment: we do consult ipv6_npinfo for frag_size 2) sk_mc_loop in ipv6 uses skb->sk and checks if we should loop the packet back to the local socket 3) ip6_skb_dst_mtu could query the settings from the user socket and force a wrong MTU Furthermore: In sk_mc_loop we could potentially land in WARN_ON(1) if we use a PF_PACKET socket ontop of an IPv6-backed vxlan device. Reuse xmit_recursion as we are currently only interested in protecting tunnel devices. Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Ido Shamay authored
[ Upstream commit e5eda89d ] Netdevice registration should be performed a the end of the driver initialization flow. If we don't do that, after calling register_netdevice, device callbacks may be issued by higher layers of the stack before final configuration of the device is done. For example (VXLAN configuration race), mlx4_SET_PORT_VXLAN was issued after the register_netdev command. System network scripts may configure the interface (UP) right after the registration, which also attach unicast VXLAN steering rule, before mlx4_SET_PORT_VXLAN was called, causing the firmware to fail the rule attachment. Fixes: 837052d0 ("net/mlx4_en: Add netdev support for TCP/IP offloads of vxlan tunneling") Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Mike Christie authored
commit b815fc12 upstream. This fixes a oops due to a double list add when adding a reject PDU for iscsit_allocate_iovecs allocation failures. The cmd has already been added to the conn_cmd_list in iscsit_setup_scsi_cmd, so this has us call iscsit_reject_cmd. Note that for ERL0 the reject PDU is not actually sent, so this patch is not completely tested. Just verified we do not oops. The problem is the add reject functions return -1 which is returned all the way up to iscsi_target_rx_thread which for ERL0 will drop the connection. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Dmitry M. Fedin authored
commit 3dc8523f upstream. Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3237" Signed-off-by:
Dmitry M. Fedin <dmitry.fedin@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Al Viro authored
commit 64b4e252 upstream. "ocfs2 syncs the wrong range" had been broken; prior to it the code was doing the wrong thing in case of O_APPEND, all right, but _after_ it we were syncing the wrong range in 100% cases. *ppos, aka iocb->ki_pos is incremented prior to that point, so we are always doing sync on the area _after_ the one we'd written to. Spotted by Joseph Qi <joseph.qi@huawei.com> back in January; unfortunately, I'd missed his mail back then ;-/ Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Takashi Iwai authored
commit cc7016ab upstream. Some BIOS version of Fujitsu Lifebook T731 seems to set up the headphone pin (0x21) without the assoc number 0x0f while it's set only to the output on the docking port (0x1a). With the recent commit [03ad6a8c: ALSA: hda - Fix "PCM" name being used on one DAC when there are two DACs], this resulted in the weird mixer element mapping where the headphone on the laptop is assigned as a shared volume with the speaker and the docking port is assigned as an individual headphone. This patch improves the situation by correcting the headphone pin config to the more appropriate value. Reported-and-tested-by:
Taylor Smock <smocktaylor@gmail.com> Signed-off-by:
-
Bart Van Assche authored
commit bba0bdd7 upstream. SCSI transport drivers and SCSI LLDs block a SCSI device if the transport layer is not operational. This means that in this state no requests should be processed, even if the REQ_PREEMPT flag has been set. This patch avoids that a rescan shortly after a cable pull sporadically triggers the following kernel oops: BUG: unable to handle kernel paging request at ffffc9001a6bc084 IP: [<ffffffffa04e08f2>] mlx4_ib_post_send+0xd2/0xb30 [mlx4_ib] Process rescan-scsi-bus (pid: 9241, threadinfo ffff88053484a000, task ffff880534aae100) Call Trace: [<ffffffffa0718135>] srp_post_send+0x65/0x70 [ib_srp] [<ffffffffa071b9df>] srp_queuecommand+0x1cf/0x3e0 [ib_srp] [<ffffffffa0001ff1>] scsi_dispatch_cmd+0x101/0x280 [scsi_mod] [<ffffffffa0009ad1>] scsi_request_fn+0x411/0x4d0 [scsi_mod] [<ffffffff81223b37>] __blk_run_queue+0x27/0x30 [<ffffffff8122a8d2>] blk_execute_rq_nowait+0x82/0x110 [<ffffffff8122a9c2>] blk_execute_rq+0x62/0xf0 [<ffffffffa000b0e8>] scsi_execute+0xe8/0x190 [scsi_mod] [<ffffffffa000b2f3>] scsi_execute_req+0xa3/0x130 [scsi_mod] [<ffffffffa000c1aa>] scsi_probe_lun+0x17a/0x450 [scsi_mod] [<ffffffffa000ce86>] scsi_probe_and_add_lun+0x156/0x480 [scsi_mod] [<ffffffffa000dc2f>] __scsi_scan_target+0xdf/0x1f0 [scsi_mod] [<ffffffffa000dfa3>] scsi_scan_host_selected+0x183/0x1c0 [scsi_mod] [<ffffffffa000edfb>] scsi_scan+0xdb/0xe0 [scsi_mod] [<ffffffffa000ee13>] store_scan+0x13/0x20 [scsi_mod] [<ffffffff811c8d9b>] sysfs_write_file+0xcb/0x160 [<ffffffff811589de>] vfs_write+0xce/0x140 [<ffffffff81158b53>] sys_write+0x53/0xa0 [<ffffffff81464592>] system_call_fastpath+0x16/0x1b [<00007f611c9d9300>] 0x7f611c9d92ff Reported-by:
Max Gurtuvoy <maxg@mellanox.com> Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
John Soni Jose authored
commit 2e7cee02 upstream. Kernel panic was happening as iscsi_host_remove() was called on a host which was not yet added. Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Reviewed-by:
-
Kailang Yang authored
commit a59d7199 upstream. Pin sense will active when power pin is wake up. Power pin will not wake up immediately during resume state. Add some delay to wait for power pin activated. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
-
Al Viro authored
commit deeb8525 upstream. If we fail past the aio_setup_ring(), we need to destroy the mapping. We don't need to care about anybody having found ctx, or added requests to it, since the last failure exit is exactly the failure to make ctx visible to lookups. Reproducer (based on one by Joe Mario <jmario@redhat.com>): void count(char *p) { char s[80]; printf("%s: ", p); fflush(stdout); sprintf(s, "/bin/cat /proc/%d/maps|/bin/fgrep -c '/[aio] (deleted)'", getpid()); system(s); } int main() { io_context_t *ctx; int created, limit, i, destroyed; FILE *f; count("before"); if ((f = fopen("/proc/sys/fs/aio-max-nr", "r")) == NULL) perror("opening aio-max-nr"); else if (fscanf(f, "%d", &limit) != 1) fprintf(stderr, "can't parse aio-max-nr\n"); else if ((ctx = calloc(limit, sizeof(io_context_t))) == NULL) perror("allocating aio_context_t array"); else { for (i = 0, created = 0; i < limit; i++) { if (io_setup(1000, ctx + created) == 0) created++; } for (i = 0, destroyed = 0; i < created; i++) if (io_destroy(ctx[i]) == 0) destroyed++; printf("created %d, failed %d, destroyed %d\n", created, limit - created, destroyed); count("after"); } } Found-by:
Joe Mario <jmario@redhat.com> Signed-off-by:
-
Thomas Schlichter authored
commit c7e8bdf5 upstream. Fix a bug that leads to showing the name and description of C-state C0 as "<null>" in sysfs after the ACPI C-states changed (e.g. after AC->DC or DC->AC transition). The function poll_idle_init() in drivers/cpuidle/driver.c initializes the state 0 during cpuidle_register_driver(), so we better do not overwrite it again with '\0' during acpi_processor_cst_has_changed(). Signed-off-by:
Thomas Schlichter <thomas.schlichter@web.de> Reviewed-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Marek Szyprowski authored
commit 05b676ab upstream. TASK_SIZE is depends on the systems architecture (32 or 64 bits) and it should not be used for defining offset boundary for mmaping buffers for CAPTURE and OUTPUT queues. This patch fixes support for MMAP calls on the CAPTURE queue on 64bit architectures (like ARM64). Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Hans Verkuil authored
commit ab312030 upstream. The v4l2_dev field of struct video_device must be set correctly. This was never done for this driver, so no video nodes were created anymore. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Dan Carpenter authored
commit bc3b5b47 upstream. I don't have this hardware but it looks like we weren't adding bridge devices as intended. Maybe the bridge is always the last device? Fixes: 05b12500 ("PCI: cpcihp: Iterate over all devices in slot, not functions 0-7") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Yijing Wang <wangyijing@huawei.com> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit 666b8051 ] On processing cumulative ACKs, the FRTO code was not checking the SACKed bit, meaning that there could be a spurious FRTO undo on a cumulative ACK of a previously SACKed skb. The FRTO code should only consider a cumulative ACK to indicate that an original/unretransmitted skb is newly ACKed if the skb was not yet SACKed. The effect of the spurious FRTO undo would typically be to make the connection think that all previously-sent packets were in flight when they really weren't, leading to a stall and an RTO. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Fixes: e33099f9 ("tcp: implement RFC5682 F-RTO") Signed-off-by:
-
Jonathan Davies authored
commit 0c36820e upstream. xen-netfront limits transmitted skbs to be at most 44 segments in size. However, GSO permits up to 65536 bytes, which means a maximum of 45 segments of 1448 bytes each. This slight reduction in the size of packets means a slight loss in efficiency. Since c/s 9ecd1a75, xen-netfront sets gso_max_size to XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER, where XEN_NETIF_MAX_TX_SIZE is 65535 bytes. The calculation used by tcp_tso_autosize (and also tcp_xmit_size_goal since c/s 6c09fa09) in determining when to split an skb into two is sk->sk_gso_max_size - 1 - MAX_TCP_HEADER. So the maximum permitted size of an skb is calculated to be (XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER) - 1 - MAX_TCP_HEADER. Intuitively, this looks like the wrong formula -- we don't need two TCP headers. Instead, there is no need to deviate from the default gso_max_size of 65536 as this already accommodates the size of the header. Currently, the largest skb transmitted by netfront is 63712 bytes (44 segments of 1448 bytes each), as observed via tcpdump. This patch makes netfront send skbs of up to 65160 bytes (45 segments of 1448 bytes each). Similarly, the maximum allowable mtu does not need to subtract MAX_TCP_HEADER as it relates to the size of the whole packet, including the header. Fixes: 9ecd1a75 ("xen-netfront: reduce gso_max_size to account for max TCP header") Signed-off-by:
Jonathan Davies <jonathan.davies@citrix.com> Signed-off-by:
-
WANG Cong authored
commit d079535d upstream. In case we move the whole dev group to another netns, we should call for_each_netdev_safe(), otherwise we get a soft lockup: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ip:798] irq event stamp: 255424 hardirqs last enabled at (255423): [<ffffffff81a2aa95>] restore_args+0x0/0x30 hardirqs last disabled at (255424): [<ffffffff81a2ad5a>] apic_timer_interrupt+0x6a/0x80 softirqs last enabled at (255422): [<ffffffff81079ebc>] __do_softirq+0x2c1/0x3a9 softirqs last disabled at (255417): [<ffffffff8107a190>] irq_exit+0x41/0x95 CPU: 0 PID: 798 Comm: ip Not tainted 4.0.0-rc4+ #881 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d1b88000 ti: ffff880119530000 task.ti: ffff880119530000 RIP: 0010:[<ffffffff810cad11>] [<ffffffff810cad11>] debug_lockdep_rcu_enabled+0x28/0x30 RSP: 0018:ffff880119533778 EFLAGS: 00000246 RAX: ffff8800d1b88000 RBX: 0000000000000002 RCX: 0000000000000038 RDX: 0000000000000000 RSI: ffff8800d1b888c8 RDI: ffff8800d1b888c8 RBP: ffff880119533778 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000b5c2 R12: 0000000000000246 R13: ffff880119533708 R14: 00000000001d5a40 R15: ffff88011a7d5a40 FS: 00007fc01315f740(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f367a120988 CR3: 000000011849c000 CR4: 00000000000007f0 Stack: ffff880119533798 ffffffff811ac868 ffffffff811ac831 ffffffff811ac828 ffff8801195337c8 ffffffff811ac8c9 ffff8801195339b0 ffff8801197633e0 0000000000000000 ffff8801195339b0 ffff8801195337d8 ffffffff811ad2d7 Call Trace: [<ffffffff811ac868>] rcu_read_lock+0x37/0x6e [<ffffffff811ac831>] ? rcu_read_unlock+0x5f/0x5f [<ffffffff811ac828>] ? rcu_read_unlock+0x56/0x5f [<ffffffff811ac8c9>] __fget+0x2a/0x7a [<ffffffff811ad2d7>] fget+0x13/0x15 [<ffffffff811be732>] proc_ns_fget+0xe/0x38 [<ffffffff817c7714>] get_net_ns_by_fd+0x11/0x59 [<ffffffff817df359>] rtnl_link_get_net+0x33/0x3e [<ffffffff817df3d7>] do_setlink+0x73/0x87b [<ffffffff810b28ce>] ? trace_hardirqs_off+0xd/0xf [<ffffffff81a2aa95>] ? retint_restore_args+0xe/0xe [<ffffffff817e0301>] rtnl_newlink+0x40c/0x699 [<ffffffff817dffe0>] ? rtnl_newlink+0xeb/0x699 [<ffffffff81a29246>] ? _raw_spin_unlock+0x28/0x33 [<ffffffff8143ed1e>] ? security_capable+0x18/0x1a [<ffffffff8107da51>] ? ns_capable+0x4d/0x65 [<ffffffff817de5ce>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817de407>] ? rtnl_lock+0x17/0x19 [<ffffffff817de407>] ? rtnl_lock+0x17/0x19 [<ffffffff817de44d>] ? __rtnl_unlock+0x17/0x17 [<ffffffff818327c6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817de42f>] rtnetlink_rcv+0x26/0x2d [<ffffffff81830f18>] netlink_unicast+0xcb/0x150 [<ffffffff8183198e>] netlink_sendmsg+0x501/0x523 [<ffffffff8115cba9>] ? might_fault+0x59/0xa9 [<ffffffff817b5398>] ? copy_from_user+0x2a/0x2c [<ffffffff817b7b74>] sock_sendmsg+0x34/0x3c [<ffffffff817b7f6d>] ___sys_sendmsg+0x1b8/0x255 [<ffffffff8115c5eb>] ? handle_pte_fault+0xbd5/0xd4a [<ffffffff8100a2b0>] ? native_sched_clock+0x35/0x37 [<ffffffff8109e94b>] ? sched_clock_local+0x12/0x72 [<ffffffff8109eb9c>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810cadbf>] ? rcu_read_lock_held+0x3b/0x3d [<ffffffff811ac1d8>] ? __fcheck_files+0x4c/0x58 [<ffffffff811ac946>] ? __fget_light+0x2d/0x52 [<ffffffff817b8adc>] __sys_sendmsg+0x42/0x60 [<ffffffff817b8b0c>] SyS_sendmsg+0x12/0x1c [<ffffffff81a29e32>] system_call_fastpath+0x12/0x17 Fixes: e7ed828f ("netlink: support setting devgroup parameters") Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Michal Kubeček authored
[ Upstream commit d0c294c5 ] On s390x, gcc 4.8 compiles this part of tcp_v6_early_demux() struct dst_entry *dst = sk->sk_rx_dst; if (dst) dst = dst_check(dst, inet6_sk(sk)->rx_dst_cookie); to code reading sk->sk_rx_dst twice, once for the test and once for the argument of ip6_dst_check() (dst_check() is inline). This allows ip6_dst_check() to be called with null first argument, causing a crash. Protect sk->sk_rx_dst access by ACCESS_ONCE() both in IPv4 and IPv6 TCP early demux code. Fixes: 41063e9d ("ipv4: Early TCP socket demux.") Fixes: c7109986 ("ipv6: Early TCP socket demux") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
-
Shachar Raindel authored
commit 8494057a upstream. Properly verify that the resulting page aligned end address is larger than both the start address and the length of the memory area requested. Both the start and length arguments for ib_umem_get are controlled by the user. A misbehaving user can provide values which will cause an integer overflow when calculating the page aligned end address. This overflow can cause also miscalculation of the number of pages mapped, and additional logic issues. Addresses: CVE-2014-8159 Signed-off-by:
Shachar Raindel <raindel@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@mellanox.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Johannes Berg authored
commit 788211d8 upstream. There's an issue with the way the RX A-MPDU reorder timer is deleted that can cause a kernel crash like this: * tid_rx is removed - call_rcu(ieee80211_free_tid_rx) * station is destroyed * reorder timer fires before ieee80211_free_tid_rx() runs, accessing the station, thus potentially crashing due to the use-after-free The station deletion is protected by synchronize_net(), but that isn't enough -- ieee80211_free_tid_rx() need not have run when that returns (it deletes the timer.) We could use rcu_barrier() instead of synchronize_net(), but that's much more expensive. Instead, to fix this, add a field tracking that the session is being deleted. In this case, the only re-arming of the timer happens with the reorder spinlock held, so make that code not rearm it if the session is being deleted and also delete the timer after setting that field. This ensures the timer cannot fire after ___ieee80211_stop_rx_ba_session() returns, which fixes the problem. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
