- 21 Apr, 2012 13 commits
-
-
Eric W. Biederman authored
Using an ascii path to register_net_sysctl as opposed to the slightly awkward ctl_path allows for much simpler code. We no longer need to malloc dev_name to keep it alive the length of our sysctl register instead we can use a small temporary buffer on the stack. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Acked-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
The sysctl core no longer natively understands sysctl tables with .child entries. Split the ipv6_table to remove the .child entries. Signed-off-by:
-
Eric W. Biederman authored
The sysctl core no longer natively understands sysctl tables with .child entries. Kill the intermediate tables and use register_net_sysctl directly to remove the need for compatibility code. Signed-off-by:
-
Eric W. Biederman authored
Don't register/unregister every ax25 table in a batch. Instead register and unregister per device ax25 sysctls as ax25 devices come and go. This moves ax25 to be a completely modern sysctl user. Registering the sysctls in just the initial network namespace, removing the use of .child entries that are no longer natively supported by the sysctl core and taking advantage of the fact that there are no longer any ordering constraints between registering and unregistering different sysctl tables. Signed-off-by:
-
Eric W. Biederman authored
sysctl no longer requires explicit creation of directories. The neigh directory is always populated with at least a default entry so this won't cause any user visible changes. Delete the ipv4_path and the ipv4_skeleton these are no longer needed. Directly register the ipv4_route_table. And since I am an idiot remove the header definitions that I should have removed in the previous patch. Signed-off-by:
-
Eric W. Biederman authored
sysctl no longer requires explicit creation of directories. The neigh directory is always populated with at least a default entry so this should cause no user visible changes. Signed-off-by:
-
Eric W. Biederman authored
On the next line we register the net_core_table in net/core which creates the directory and ensures it exists. Signed-off-by:
-
Eric W. Biederman authored
This makes it clearer which sysctls are relative to your current network namespace. This makes it a little less error prone by not exposing sysctls for the initial network namespace in other namespaces. This is the same way we handle all of our other network interfaces to userspace and I can't honestly remember why we didn't do this for sysctls right from the start. Signed-off-by:
-
Eric W. Biederman authored
register_sysctl_rotable never caught on as an interesting way to register sysctls. My take on the situation is that what we want are sysctls that we can only see in the initial network namespace. What we have implemented with register_sysctl_rotable are sysctls that we can see in all of the network namespaces and can only change in the initial network namespace. That is a very silly way to go. Just register the network sysctls in the initial network namespace and we don't have any weird special cases to deal with. The sysctls affected are: /proc/sys/net/ipv4/ipfrag_secret_interval /proc/sys/net/ipv4/ipfrag_max_dist /proc/sys/net/ipv6/ip6frag_secret_interval /proc/sys/net/ipv6/mld_max_msf I really don't expect anyone will miss them if they can't read them in a child user namespace. CC: Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
-
Eric W. Biederman authored
If the netfilter code is modified to use register_net_sysctl_table the kernel fails to boot because the per net sysctl infrasturce is not setup soon enough. So to avoid races call net_sysctl_init from sock_init(). Signed-off-by:
-
Eric W. Biederman authored
Implementation limitations of the sysctl core won't let /proc/sys/net reside in a network namespace. /proc/sys/net at least must be registered as a normal sysctl. So register /proc/sys/net early as an empty directory to guarantee we don't violate this constraint and hit bugs in the sysctl implementation. Signed-off-by:
-
Eric W. Biederman authored
Right now all of the networking sysctl registrations are running in a compatibiity mode. The natvie sysctl registration api takes a cstring for a path and a simple ctl_table. Implement register_net_sysctl so that we can register network sysctls without needing to use compatiblity code in the sysctl core. Switching from a ctl_path to a cstring results in less boiler plate and denser code that is a little easier to read. I would simply have changed the arguments to register_net_sysctl_table instead of keeping two functions in parallel but gcc will allow a ctl_path pointer to be passed to a char * pointer with only issuing a warning resulting in completely incorrect code can be built. Since I have to change the function name I am taking advantage of the situation to let both register_net_sysctl and register_net_sysctl_table live for a short time in parallel which makes clean conversion patches a bit easier to read and write. Signed-off-by:
-
-
- 20 Apr, 2012 15 commits
-
-
Huang, Xiong authored
MDIO_REG_ADDR_MASK is already applied in function atl1c_write_phy_reg and atl1c_read_phy_reg Signed-off-by:
xiong <xiong@qca.qualcomm.com> Tested-by:
Liu David <dwliu@qca.qualcomm.com> Signed-off-by:
-
Huang, Xiong authored
l2cb 1.1 hardware has a bug for magic wakeup, the workaround is to add pattern enable. WoL related registers are refined as well. Signed-off-by:
-
Huang, Xiong authored
bit PCIE_PHYMISC_FORCE_RCV_DET is only for l1c&l2c to fix WoL issue, other chips set bit5 of REG_MASTER_CTRL --- this way could save more power than the former, and the bit should be kept all time. l2cb 1.x has special setting for L0S/L1 l2cb 1.x & l1d 1.x should clear Vendor Message on some platforms, otherwise it will cause the root complex hang. Signed-off-by:
-
Huang, Xiong authored
some platforms(BIOS or OS) may change ASPM configuration in PCI Express Link Control Register directly and dynamically regardless the device driver installation. Checking if ASPM support during the driver init phase by reading PCI Express Link Contrl Register doesn't make sense. This refine/update assume L0S/L1 is defalut enabled as hw->ctrl_flags inited. atl1c_set_aspm will set real configuration based on chip capability to hardware register. atl1c_disable_l0s_l1 and register definition of REG_PM_CTRL are refined as well. Signed-off-by:
-
Huang, Xiong authored
bit MASTER_CTRL_CLK_SEL_DIS could be set before enter suspend clear it after resume to enable pclk(PCIE clock) switch to low frequency(25M) in some circumstances to save power. Signed-off-by:
-
Huang, Xiong authored
refine/update register REG_MASTER_CTRL definition according with hardware spec. Signed-off-by:
-
Huang, Xiong authored
clear PCIE error status (error log is write-1-clear). REG_PCIE_UC_SEVERITY is removed as it's a standard pcie register, and using kernle API to access it. Signed-off-by:
-
Huang, Xiong authored
dmar_dly_cnt and dmaw_dly_cnt aren't used by hardware/driver any more. Signed-off-by:
-
Huang, Xiong authored
atl1c_configure_tx used a wrong value of MAX_TX_OFFLOAD_THRESH(9KB) for TSO threshold. the right value should be 7KB Fast Ethernet controller doesn't support Jumbo frame. Signed-off-by:
-
Huang, Xiong authored
l1c_wait_until_idle is called for serval modules (TXQ/RXQ/TXMAC/RXMAC). specific moudle have specific idle/busy status in reg REG_IDLE_STATUS. the previous code return wrongly if all modules are in idle status, regardless the 'stop' action is applied on individual module. Refine the reg REG_IDLE_STATUS definition as well. Signed-off-by:
-
Huang, Xiong authored
threshold setting to control ASPM for diff chips are different. currently, all gigabit-capability chips have limited-ASPM under 100M throughput. Signed-off-by:
-
Giuseppe CAVALLARO authored
On some platforms, for example where we are doing the bring-up, the csr clock is not passed from the framework and the Ethernet device driver is failing when it can work w/o any issues and using the default values. So this patch just warnings the case of the csr clock cannot be acquired but w/o failing the probe step. I have just tested it on ST STiH415 SoC (ARM). Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Giuseppe CAVALLARO authored
Recently the dma parameters that can be passed from the platform have been moved from the plat_stmmacenet_data to the stmmac_dma_cfg. In case of this new structure is not well allocated the driver can fails. This is an example how this field is managed in ST platforms static struct stmmac_dma_cfg gmac_dma_setting = { .pbl = 32, }; static struct plat_stmmacenet_data stih415_ethernet_platform_data[] = { { .dma_cfg = &gmac_dma_setting, .has_gmac = 1, [snip] This patch so verifies that the dma_cfg passed from the platform. In case of it is NULL there is no reason that the driver has to fail and some default values can be passed. These are ok for all the Synopsys chips and could impact on performances, only. Signed-off-by: -
Francesco Virlinzi authored
This patch moves the mdio_register/_unregister in probe/remove functions and this also is required when hibernation on disk is done. Signed-off-by:
Francesco Virlinzi <francesco.virlinzi@st,com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st,com> Signed-off-by:
-
Francesco Virlinzi authored
Freeze and restore can call the custom init/exit functions. Also the patch adds a custom data field that can be used for storing platform data useful on restore the embedded setup (e.g. GPIO, SYSCFG). Signed-off-by:
Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by:
-
- 19 Apr, 2012 12 commits
-
-
David Spinadel authored
Remove declaration of iwl_alloc_traffic_mem from iwl-agn.h, from methods that was exposed to support MVM. MVM doesn't have to use this declaration. CC: netdev@vger.kernel.org Signed-off-by:
David Spinadel <david.spinadel@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Allan Stephens authored
Enhances command validation done by TIPC's configuration service so that it works properly even if the node's network address is changed in mid-operation. The default node address of <0.0.0> is now recognized as an alias for "this node" even after a new network address has been assigned. Signed-off-by:
Allan Stephens <allan.stephens@windriver.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Revises handling of a rejected message to ensure that a locally originated message is returned properly even if the node's network address is changed in mid-operation. The routine now treats the default node address of <0.0.0> as an alias for "this node" when determining where to send a returned message. Signed-off-by:
-
Allan Stephens authored
Revises handling of send routines for payload messages to ensure that they are processed properly even if the node's network address is changed in mid-operation. The routines now treat the default node address of <0.0.0> as an alias for "this node" when determining where to send an outgoing message. Signed-off-by:
-
Allan Stephens authored
There are two send routines that might conceivably be asked by an application to send a message off-node when the node is still using the default network address. These now have an added check that detects this and rejects the message gracefully. Signed-off-by:
-
Allan Stephens authored
The routine that changes the node's network address now takes TIPC's network lock in write mode while the main address variable and associated data structures are being changed; this is needed to ensure that the link subsystem won't attempt to send a message off-node until the sending port's message header template has been updated with the node's new network address. Signed-off-by:
-
Allan Stephens authored
Revises routines that deal with connections between two ports on the same node to ensure the connection is not impacted if the node's network address is changed in mid-operation. The routines now treat the default node address of <0.0.0> as an alias for "this node" in the following situations: 1) Incoming messages destined to a connected port now handle the alias properly when validating that the message was sent by the expected peer port, ensuring that the message will be accepted regardless of whether it specifies the node's old network address or it's current one. 2) The code which completes connection establishment now handles the alias properly when determining if the peer port is on the same node as the connected port. An added benefit of addressing issue 1) is that some peer port validation code has been relocated to TIPC's socket subsystem, which means that validation is no longer done twice when a message is sent to a non-socket port (such as TIPC's configuration service or network topology service). Signed-off-by:
-
Allan Stephens authored
Prior to commit 23dd4cce "tipc: Combine port structure with tipc_port structure" there was a need for the two sets of helper functions. But now they are just duplicates. Remove the globally visible ones, and mark the remaining ones as inline. Signed-off-by:
-
Allan Stephens authored
Re-orders port creation logic so that the initialization of a new port's message header template occurs while the port list lock is held. This ensures that a change to the node's network address that occurs at the same time as the port is being created does not result in the template identifying the sender using the former network address. The new approach guarantees that the new port's template is using the current network address or that it will be updated when the address changes. Signed-off-by:
-
Allan Stephens authored
Removes an unnecessary check in the logic that updates the message header template for existing ports when a node's network address is first assigned. There is no longer any need to check to see if the node's network address has actually changed since the calling routine has already verified that this is so. Signed-off-by:
-
Allan Stephens authored
Revises routines that add and remove an entry from a node's name table so that the publication scope lists are updated properly even if the node's network address is changed in mid-operation. The routines now recognize the default node address of <0.0.0> as an alias for "this node" even after a new network address has been assigned. Signed-off-by:
-
Allan Stephens authored
Introduces routines that test whether a given network address is equal to a node's own network address or if it lies within the node's own network cluster, and which work properly regardless of whether the node is using the default network address <0.0.0> or a non-zero network address that is assigned later on. In essence, these routines ensure that address <0.0.0> is treated as an alias for "this node", regardless of which network address the node is actually using. Old users of the pre-existing more strict match in_own_cluster() have been accordingly redirected to what is now called in_own_cluster_exact() --- which does not extend matching to <0,0,0>. Signed-off-by:
-
