This change fixes a panic when assign_irq_vector(irq) is called with
irq = AUTO_ASSIGN.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

* 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: (25 commits)
  [POWERPC] 85xx: Added needed MPC85xx PCI device IDs
  [POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs
  [POWERPC] 85xxCDS: MPC8548 DTS cleanup.
  [POWERPC] 85xxCDS: Misc 8548 PCI Corrections.
  [POWERPC] 85xxCDS: Delay 8259 cascade hookup.
  [POWERPC] 85xxCDS: Make sure restart resets the PCI bus.
  [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line.
  [POWERPC] FSL: Add support for PCI-X controllers
  [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB
  [POWERPC] Provide ability to setup P2P bridge registers from struct resource
  [POWERPC] Add basic PCI/PCI Express support for 8544DS board
  [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime
  [POWERPC] Removed setup_indirect_pci_nomap
  [POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDS
  [POWERPC] 85xx: Added 8568 PCIe support
  [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected
  [POWERPC] Add basic PCI node for mpc8568mds board
  [POWERPC] Use Freescale pci/pcie common code for 85xx boards
  [POWERPC] Update PCI nodes in the 83xx/85xx boards device tree
  [POWERPC] Add 8548 CDS PCI express controller node and PCI-X device node
  ...

kunmap_atomic() takes the virtual address, not the mapped page as
argument.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix marge error due to conflict in arch/mips/kernel/head.S
  [MIPS] ARC: Remove unused arch/mips/arc/console.c
  [MIPS] SNI: sniprom
  [MIPS] Jazz: remove unneeded reset functions
  [MIPS] Whitespace cleanup.
  [MIPS] Make resources for ds1742 "static __initdata"
  [MIPS] Replace __attribute_used__ with __used
  [MIPS] Jazz: Remove unused arch/mips/jazz/io.c
  [MIPS] Mark prom_free_prom_memory as __init_refok
  [MIPS] MIPSsim: Fix cflags

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_hpt37x: Fix 2.6.22 clock PLL regression
  pata_ali: Correct HP detect
  ata_piix: fix suspend/resume for some TOSHIBA laptops
  PCI: export __pci_reenable_device()

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (26 commits)
  netdev: i82596 Ethernet needs <asm/cacheflush.h>
  forcedeth: mcp73 device addition
  forcedeth: new device ids in pci_ids.h
  atl1: make atl1_init_ring_ptrs static
  eHEA: net_poll support
  drivers/net/acenic.c: fix check-after-use
  defxx: Use __maybe_unused rather than a local hack
  Fix error checking in Vitesse IRQ config
  ps3: reduce allocation size of rx skb buffers
  atl1: use kernel provided ethernet length constants
  atl1: fix typo in dma_req_block
  atl1: change cmb write threshold
  atl1: fix typo in DMA engine setup
  atl1: change tpd_avail function name
  ps3: fix rare issue that reenabling rx DMA fails
  ps3: removed calling netif_poll_enable() in open()
  ps3: use ethX as the name of irq
  ps3: use net_device_stats of net_device structure
  ps3: removed conditional ethtool support
  ps3: removed defines no longer used
  ...

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Mark most of initial bootup asm as .text.init.ref_ok
  [SPARC32]: Fix bug in sparc optimized memset.
  [SPARC64]: Update defconfig.
  [SPARC]: Add missing NOTES section.
  [SPARC32]: missing exports
  [SPARC32]: Deal with rtc/sun_mostek_rtc conflict.

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [8021Q]: vlan_ioctl_handler: fix return value
  [GENETLINK]: Correctly report errors while registering a multicast group
  [GENETLINK]: Fix adjustment of number of multicast groups
  [GENETLINK]: Fix race in genl_unregister_mc_groups()
  [NETFILTER]: Clean up duplicate includes in net/netfilter/
  [NETFILTER]: Clean up duplicate includes in net/bridge/
  [NETFILTER]: Fix logging regression
  [TCPv6] MD5SIG: Ensure to reset allocation count to avoid panic.

net/8021q/vlan.c: In function 'vlan_ioctl_handler':
net/8021q/vlan.c:700: warning: 'err' may be used uninitialized in this function

The warning is incorrect, but from my reading this ioctl will return -EINVAL
on success.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current calculation of the maximum number of genetlink
multicast groups seems odd, fix it.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

family->mcast_groups is protected by genl_lock so it must
be held while accessing the list in genl_unregister_mc_groups().
Requires adding a non-locking variant of genl_unregister_mc_group().
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch cleans up duplicate includes in
	net/netfilter/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch cleans up duplicate includes in
	net/bridge/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Loading one of the LOG target fails if a different target has already
registered itself as backend for the same family. This can affect the
ipt_LOG and ipt_ULOG modules when both are loaded.

Reported and tested by: <t.artem@mailcity.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

After clearing all passwords for IPv6 peers, we need to 
set allocation count to zero as well as we free the storage.
Otherwise, we panic when a user trys to (re)add a password.

Discovered and fixed by MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp>.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can't mark the whole thing init because there are dependencies
in bootloaders that assume that _start, or whatever the image
entry value, is 2 instructions before the "HdrS" signature.

In fact, TILO assumes this entry is always at 0x4000, yikes!

Also, right after the bootloader info area there are OBP strings and
values that get used later in the boot process, and those are not all
provably .init yet.
Signed-off-by: David S. Miller <davem@davemloft.net>

	Just one version of Linux ago
	The PLL code broke - oh no!
	But set the right mode
	And fix up the code
	Makes the PLL timing sync go

[whatever happened to the sailor from Nantucket, hero of many limericks?  -jg]

Closes-bug: #8791
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ACPI implementations in several TOSHIBA laptops are weird and burn cpu
cycles for tens of seconds while trying to suspend if the PCI device
for the ATA controller is disabled when the ACPI suspend is called.

This patch uses DMI to match those machines and bypass device disable
on those machines during suspend.  As the device needs to be put into
enabled state on resume without affecting PCI enable count, matching
resume callback uses __pci_reenable_device().

This bug is reported in bugzilla bug 7780.

  http://bugzilla.kernel.org/show_bug.cgi?id=7780Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Some odd ACPI implementations choke if certain controller is disabled
when ACPI suspend is invoked but we still need to make sure the PCI
device is enabled during resume.  Simply using pci_enable_device()
unbalances device enable count.  Export __pci_reenable_device().
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Sparc optimized memset (arch/sparc/lib/memset.S) does not fill last
byte of the memory area, if area size is less than 8 bytes and start
address is not word (4-bytes) aligned.

Here is code chunk where bug located:
/* %o0 - memory address, %o1 - size, %g3 - value */
8:
     add    %o0, 1, %o0
    subcc    %o1, 1, %o1
    bne,a    8b
     stb %g3, [%o0 - 1]

This code should write byte every loop iteration, but last time delay
instruction stb is not executed because branch instruction sets
"annul" bit.

Patch replaces bne,a by bne instruction.

Error can be reproduced by simple kernel module:

--------------------
#include <linux/module.h>
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <string.h>

static void do_memset(void **p, int size)
{
        memset(p, 0x00, size);
}

static int __init memset_test_init(void)
{
    char fooc[8];
    int *fooi;
    memset(fooc, 0xba, sizeof(fooc));

    do_memset((void**)(fooc + 3), 1);

    fooi = (int*) fooc;
    printk("%08X %08X\n", fooi[0], fooi[1]);

    return -1;
}

static void __exit memset_test_cleanup(void)
{
    return;
}

module_init(memset_test_init);
module_exit(memset_test_cleanup);

MODULE_LICENSE("GPL");
EXPORT_NO_SYMBOLS;
--------------------
Signed-off-by: Alexander Shmelev <ashmelev@task.sun.mcst.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev: i82596 Ethernet needs <asm/cacheflush.h> on m68k

drivers/net/82596.c: In function 'init_rx_bufs':
drivers/net/82596.c:552: error: implicit declaration of function 'cache_clear'
drivers/net/82596.c: In function 'i596_start_xmit':
drivers/net/82596.c:1104: error: implicit declaration of function 'cache_push'

The driver still compiles on ia32 (CONFIG_APRICOT=y)
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This patch contains new device settings for MCP73 chipset.
Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This patch contains new device ids for MCP73 chipset.
Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Sparse (correctly) thinks this function should be static.  Make it so.
Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

net_poll support for eHEA added
Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

The Coverity checker noted that we've already dereferenced "dev" when we
check whether it's NULL.

Since it's impossible that "dev" is NULL at this place this patch
removes the NULL check.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

 This is a change to remove a local hack in favour to __maybe_unused that
has been recently added.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

phy_read() returns a negative number if there's an error, but the
error-checking code in the Vitesse driver's config_intr function
triggers if phy_read() returns non-zero.  Correct that.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Reduced allocation size for rx skb buffers, from 2308 bytes to
1356 per buffer.
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Use constants already provided by the kernel for ethernet related lengths.
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

s/dam/dma
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Change the threshold number of descriptors used to trigger CMB writes.
The vendor reports that under certain conditions this will reduce the
number of unnecessary tx interrupts and improve rx performance.

This change is lifted directly from vendor version 1.2.40.2 of the L1
driver.
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

The DMA engine setup contains a typo that can result in an incorrect
dmaw_block setting.
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Change tpd_avail() to atl1_tpd_avail().
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Fixed rare issue that 'lv1_net_start_rx_dma failed, status=-9" was shown
in dmesg.  This meant restarting rx DMA had been rejected by the hypervisor.
This issue would caused if the guest os requested starting DMA when
the hypervisor thought the DMA was in progress.
The state machine for DMA status of the hypervisor would be updated
by processing interrupt in the hypervisor.
Thus we should wait for the interrupt delivery before restarting
DMA.
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Removed use of netif_poll_enable() in open function.
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Use net_device name for registration of irq as many network drivers do.
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Removed the statistics information from private structre.
Instead, use net_device_stats in net_device structure.
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>