napi_schedule_rps() return value is ignored, remove it.

Change the comment to clarify the intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Saeed Mahameed says:

====================
mlx5-updates-2023-03-28

Dragos Tatulea says:
====================

net/mlx5e: RX, Drop page_cache and fully use page_pool

For page allocation on the rx path, the mlx5e driver has been using an
internal page cache in tandem with the page pool. The internal page
cache uses a queue for page recycling which has the issue of head of
queue blocking.

This patch series drops the internal page_cache altogether and uses the
page_pool to implement everything that was done by the page_cache
before:
* Let the page_pool handle dma mapping and unmapping.
* Use fragmented pages with fragment counter instead of tracking via
  page ref.
* Enable skb recycling.

The patch series has the following effects on the rx path:

* Improved performance for the cases when there was low page recycling
  due to head of queue blocking in the internal page_cache. The test
  for this was running a single iperf TCP stream to a rx queue
  which is bound on the same cpu as the application.

  |-------------+--------+--------+------+---------|
  | rq type     | before | after  | unit |   diff  |
  |-------------+--------+--------+------+---------|
  | striding rq |  30.1  |  31.4  | Gbps |  4.14 % |
  | legacy rq   |  30.2  |  33.0  | Gbps |  8.48 % |
  |-------------+--------+--------+------+---------|

* Small XDP performance degradation. The test was is XDP drop
  program running on a single rx queue with small packets incoming
  it looks like this:

  |-------------+----------+----------+------+---------|
  | rq type     | before   | after    | unit |   diff  |
  |-------------+----------+----------+------+---------|
  | striding rq | 19725449 | 18544617 | pps  | -6.37 % |
  | legacy rq   | 19879931 | 18631841 | pps  | -6.70 % |
  |-------------+----------+----------+------+---------|

  This will be handled in a different patch series by adding support for
  multi-packet per page.

* For other cases the performance is roughly the same.

The above numbers were obtained on the following system:
  24 core Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz
  32 GB RAM
  ConnectX-7 single port

The breakdown on the patch series is the following:
* Preparations for introducing the mlx5e_frag_page struct.
* Delete the mlx5e_page_cache struct.
* Enable dma mapping from page_pool.
* Enable skb recycling and fragment counting.
* Do deferred release of pages (just before alloc) to ensure better
  page_pool cache utilization.

====================

* tag 'mlx5-updates-2023-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: RX, Remove unnecessary recycle parameter and page_cache stats
  net/mlx5e: RX, Break the wqe bulk refill in smaller chunks
  net/mlx5e: RX, Increase WQE bulk size for legacy rq
  net/mlx5e: RX, Split off release path for xsk buffers for legacy rq
  net/mlx5e: RX, Defer page release in legacy rq for better recycling
  net/mlx5e: RX, Change wqe last_in_page field from bool to bit flags
  net/mlx5e: RX, Defer page release in striding rq for better recycling
  net/mlx5e: RX, Rename xdp_xmit_bitmap to a more generic name
  net/mlx5e: RX, Enable skb page recycling through the page_pool
  net/mlx5e: RX, Enable dma map and sync from page_pool allocator
  net/mlx5e: RX, Remove internal page_cache
  net/mlx5e: RX, Store SHAMPO header pages in array
  net/mlx5e: RX, Remove alloc unit layout constraint for striding rq
  net/mlx5e: RX, Remove alloc unit layout constraint for legacy rq
  net/mlx5e: RX, Remove mlx5e_alloc_unit argument in page allocation
====================

Link: https://lore.kernel.org/r/20230328205623.142075-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

clang 16.0.0 with W=1 reports:

drivers/net/ethernet/amazon/ena/ena_netdev.c:1901:6: error: variable 'tx_bytes' set but not used [-Werror,-Wunused-but-set-variable]
        u32 tx_bytes = 0;

The variable is not used so remove it.
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20230328151958.410687-1-horms@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The h and the f letters are swapped so it unlocks the wrong lock.

Fixes: 577f0d1b ("octeon_ep: add separate mailbox command and response queues")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/251aa2a2-913e-4868-aac9-0a90fc3eeeda@kili.mountainSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Adding a DFL (Device Feature List) device driver of ToD device for
Intel FPGA cards.

The Intel FPGA Time of Day(ToD) IP within the FPGA DFL bus is exposed
as PTP Hardware clock(PHC) device to the Linux PTP stack to synchronize
the system clock to its ToD information using phc2sys utility of the
Linux PTP stack. The DFL is a hardware List within FPGA, which defines
a linked list of feature headers within the device MMIO space to provide
an extensible way of adding subdevice features.
Signed-off-by: Raghavendra Khadatare <raghavendrax.anand.khadatare@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230328142455.481146-1-tianfei.zhang@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The HNS3 driver supports Wake-on-LAN, which can wake up
the server from power off state to power on state by magic
packet or magic security packet.

ChangeLog:
v1->v2:
Deleted the debugfs function that overlaps with the ethtool function
from suggestion of Andrew Lunn.

v2->v3:
Return the wol configuration stored in driver,
suggested by Alexander H Duyck.

v3->v4:
Add a helper to go from netdev to the local struct,
suggested by Simon Horman and Jakub Kicinski.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Edward Cree says:

====================
sfc: support TC decap rules

This series adds support for offloading tunnel decapsulation TC rules to
 ef100 NICs, allowing matching encapsulated packets to be decapsulated in
 hardware and redirected to VFs.
For now an encap match must be on precisely the following fields:
 ethertype (IPv4 or IPv6), source IP, destination IP, ipproto UDP,
 UDP destination port.  This simplifies checking for overlaps in the
 driver; the hardware supports a wider range of match fields which
 future driver work may expose.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

A 'foreign' rule is one for which the net_dev is not the sfc netdevice
 or any of its representors.  The driver registers indirect flow blocks
 for tunnel netdevs so that it can offload decap rules.  For example:

    tc filter add dev vxlan0 parent ffff: protocol ipv4 flower \
        enc_src_ip 10.1.0.2 enc_dst_ip 10.1.0.1 \
        enc_key_id 1000 enc_dst_port 4789 \
        action tunnel_key unset \
        action mirred egress redirect dev $REPRESENTOR

When notified of a rule like this, register an encap match on the IP
 and dport tuple (creating an Outer Rule table entry) and insert an MAE
 action rule to perform the decapsulation and deliver to the representee.

Moved efx_tc_delete_rule() below efx_tc_flower_release_encap_match() to
 avoid the need for a forward declaration.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a hashtable to detect duplicate and conflicting matches.  If match
 is not a duplicate, call MAE functions to add/remove it from OR table.
Calling code not added yet, so mark the new functions as unused.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An encap match corresponds to an entry in the exact-match Outer Rule
 table; the lookup response includes the encap type (protocol) allowing
 the hardware to continue parsing into the inner headers.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Translate the fields from flow dissector into struct efx_tc_match.
In efx_tc_flower_replace(), reject filters that match on them, because
 only 'foreign' filters (i.e. those for which the ingress dev is not
 the sfc netdev or any of its representors, e.g. a tunnel netdev) can
 use them.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend the MAE caps check to validate that the hardware supports these
 outer-header matches where used by the driver.
Extend efx_mae_populate_match_criteria() to fill in the outer rule ID
 and VNI match fields.
Nothing yet populates these match fields, nor creates outer rules.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Includes an explanation of the lifetime of the 'cursor' action-set `act`.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Herbert Xu says:

====================
macvlan: Allow some packets to bypass broadcast queue

This patch series allows some packets to bypass the broadcast
queue on receive.  Currently all multicast packets are queued
on receive and then processed in a work queue.  This is to avoid
an unbounded amount of work occurring in the receive path, as
one broadcast packet could easily translate into 4,000 packets.

However, for multicast packets with just one receiver (possible
for IPv6 ND), this introduces unnecessary latency as the packet
will go to exactly one device.

This series allows such multicast packets to be processed inline.
It also adds a toggle which lets the admin control what threshold
to set between queueing and not queueing.  A follow-up patch for
iproute will be posted.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Make the broadcast cutoff configurable through netlink.  Note
that macvlan is weird because there is no central device for
us to configure (the lowerdev could be anything).  So all the
options are duplicated over what could be thousands of child
devices.

IFLA_MACVLAN_BC_QUEUE_LEN took the approach of taking the maximum
of all child device settings.  This is unnecessary as we could
simply store the option in the port device and take the last
child device that gets updated as the value to use.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

As it stands all broadcast and multicast packets are queued and
processed in a work queue.  This is so that we don't overwhelm
the receive softirq path by generating thousands of packets or
more (see commit 412ca155 "macvlan: Move broadcasts into a
work queue").

As such all multicast packets will be delayed, even if they will
be received by a single macvlan device.  As using a workqueue
is not free in terms of latency, we should avoid this where possible.

This patch adds a new filter to determine which addresses should
be delayed and which ones won't.  This is done using a crude
counter of how many times an address has been added to the macvlan
port (ha->synced).  For now if an address has been added more than
once, then it will be considered to be broadcast.  This could be
tuned further by making this threshold configurable.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Matthieu Baerts says:

====================
mptcp: a couple of cleanups and improvements

Patch 1 removes an unneeded address copy in subflow_syn_recv_sock().

Patch 2 simplifies subflow_syn_recv_sock() to postpone some actions and
to avoid a bunch of conditionals.

Patch 3 stops reporting limits that are not taken into account when the
userspace PM is used.

Patch 4 adds a new test to validate that the 'subflows' field reported
by the kernel is correct. Such info can be retrieved via Netlink (e.g.
with ss) or getsockopt(SOL_MPTCP, MPTCP_INFO).

---
Changes in v2:
- Patch 3/4's commit message has been updated to use the correct SHA
- Rebased on latest net-next
- Link to v1: https://lore.kernel.org/r/20230324-upstream-net-next-20230324-misc-features-v1-0-5a29154592bd@tessares.net
====================
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the mptcp_info fields tests in endpoint_tests(). Add a
new function chk_mptcp_info() to check the given number of the given
mptcp_info field.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/330Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only the in-kernel PM uses the number of address and subflow limits
allowed per connection.

It then makes more sense not to display such info when other PMs are
used not to confuse the userspace by showing limits not being used.

While at it, we can get rid of the "val" variable and add indentations
instead.

It would have been good to have done this modification directly in
commit 4d25247d ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs")
but as we change a bit the behaviour, it is fine not to backport it to
stable.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Postpone the msk cloning to the child process creation
so that we can avoid a bunch of conditionals.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/61Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the syn_recv fallback path, the msk is unused. We can skip
setting the socket address.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kuniyuki Iwashima says:

====================
ipv6: Random cleanup for in6addr_any.

The first patch removes in6addr_any alternatives and the second
removes redundant initialisation of a local variable.

Changes:
  v2: Use ipv6_addr_any() in patch 1. (David Ahern)

  v1: https://lore.kernel.org/netdev/20230322012204.33157-1-kuniyu@amazon.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We'll call memset(&tmp, 0, sizeof(tmp)) later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some code defines the IPv6 wildcard address as a local variable and
use it with memcmp() or ipv6_addr_equal().

Let's use in6addr_any and ipv6_addr_any() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bobby Eshleman says:

====================
Add support for sockmap to vsock.

We're testing usage of vsock as a way to redirect guest-local UDS
requests to the host and this patch series greatly improves the
performance of such a setup.

Compared to copying packets via userspace, this improves throughput by
121% in basic testing.

Tested as follows.

Setup: guest unix dgram sender -> guest vsock redirector -> host vsock
       server
Threads: 1
Payload: 64k
No sockmap:
- 76.3 MB/s
- The guest vsock redirector was
  "socat VSOCK-CONNECT:2:1234 UNIX-RECV:/path/to/sock"
Using sockmap (this patch):
- 168.8 MB/s (+121%)
- The guest redirector was a simple sockmap echo server,
  redirecting unix ingress to vsock 2:1234 egress.
- Same sender and server programs

*Note: these numbers are from RFC v1

Only the virtio transport has been tested. The loopback transport was
used in writing bpf/selftests, but not thoroughly tested otherwise.

This series requires the skb patch.

Changes in v4:
- af_vsock: fix parameter alignment in vsock_dgram_recvmsg()
- af_vsock: add TCP_ESTABLISHED comment in vsock_dgram_connect()
- vsock/bpf: change ret type to bool

Changes in v3:
- vsock/bpf: Refactor wait logic in vsock_bpf_recvmsg() to avoid
  backwards goto
- vsock/bpf: Check psock before acquiring slock
- vsock/bpf: Return bool instead of int of 0 or 1
- vsock/bpf: Wrap macro args __sk/__psock in parens
- vsock/bpf: Place comment trailer */ on separate line

Changes in v2:
- vsock/bpf: rename vsock_dgram_* -> vsock_*
- vsock/bpf: change sk_psock_{get,put} and {lock,release}_sock() order
  to minimize slock hold time
- vsock/bpf: use "new style" wait
- vsock/bpf: fix bug in wait log
- vsock/bpf: add check that recvmsg sk_type is one dgram, seqpacket, or
  stream.  Return error if not one of the three.
- virtio/vsock: comment __skb_recv_datagram() usage
- virtio/vsock: do not init copied in read_skb()
- vsock/bpf: add ifdef guard around struct proto in dgram_recvmsg()
- selftests/bpf: add vsock loopback config for aarch64
- selftests/bpf: add vsock loopback config for s390x
- selftests/bpf: remove vsock device from vmtest.sh qemu machine
- selftests/bpf: remove CONFIG_VIRTIO_VSOCKETS=y from config.x86_64
- vsock/bpf: move transport-related (e.g., if (!vsk->transport)) checks
  out of fast path
====================
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a test case testing the redirection from connectible AF_VSOCK
sockets to connectible AF_UNIX sockets.
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add vsock loopback to the test kernel.

This allows sockmap for vsock to be tested.
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds sockmap support for vsock sockets. It is intended to be
usable by all transports, but only the virtio and loopback transports
are implemented.

SOCK_STREAM, SOCK_DGRAM, and SOCK_SEQPACKET are all supported.
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds the vsock_perf binary to the gitignore file.

Fixes: 8abbffd2 ("test/vsock: vsock_perf utility")
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230327-vsock-add-vsock-perf-to-ignore-v1-1-f28a84f3606b@bytedance.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Donald Hunter says:

====================
ynl: add support for user headers and struct attrs

Add support for user headers and struct attrs to YNL. This patchset adds
features to ynl and add a partial spec for openvswitch that demonstrates
use of the features.

Patch 1-4 add features to ynl
Patch 5 adds partial openvswitch specs that demonstrate the new features
Patch 6-7 add documentation for legacy structs and for sub-type
====================

Link: https://lore.kernel.org/r/20230327083138.96044-1-donald.hunter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a definition for sub-type to the protocol spec doc and a description of
its usage for C arrays in genetlink-legacy.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Describe the genetlink-legacy support for using struct definitions
for fixed headers and for binary attributes.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The openvswitch family has a fixed header, uses struct attrs and has array
values. This partial spec demonstrates these features in the YNL CLI. These
specs are sufficient to create, delete and dump datapaths and to dump vports:

$ ./tools/net/ynl/cli.py \
    --spec Documentation/netlink/specs/ovs_datapath.yaml \
    --do dp-new --json '{ "dp-ifindex": 0, "name": "demo", "upcall-pid": 0}'
None

$ ./tools/net/ynl/cli.py \
    --spec Documentation/netlink/specs/ovs_datapath.yaml \
    --dump dp-get --json '{ "dp-ifindex": 0 }'
[{'dp-ifindex': 3,
  'masks-cache-size': 256,
  'megaflow-stats': {'cache-hits': 0,
                     'mask-hit': 0,
                     'masks': 0,
                     'pad1': 0,
                     'padding': 0},
  'name': 'test',
  'stats': {'flows': 0, 'hit': 0, 'lost': 0, 'missed': 0},
  'user-features': {'dispatch-upcall-per-cpu',
                    'tc-recirc-sharing',
                    'unaligned'}},
 {'dp-ifindex': 48,
  'masks-cache-size': 256,
  'megaflow-stats': {'cache-hits': 0,
                     'mask-hit': 0,
                     'masks': 0,
                     'pad1': 0,
                     'padding': 0},
  'name': 'demo',
  'stats': {'flows': 0, 'hit': 0, 'lost': 0, 'missed': 0},
  'user-features': set()}]

$ ./tools/net/ynl/cli.py \
    --spec Documentation/netlink/specs/ovs_datapath.yaml \
    --do dp-del --json '{ "dp-ifindex": 0, "name": "demo"}'
None

$ ./tools/net/ynl/cli.py \
    --spec Documentation/netlink/specs/ovs_vport.yaml \
    --dump vport-get --json '{ "dp-ifindex": 3 }'
[{'dp-ifindex': 3,
  'ifindex': 3,
  'name': 'test',
  'port-no': 0,
  'stats': {'rx-bytes': 0,
            'rx-dropped': 0,
            'rx-errors': 0,
            'rx-packets': 0,
            'tx-bytes': 0,
            'tx-dropped': 0,
            'tx-errors': 0,
            'tx-packets': 0},
  'type': 'internal',
  'upcall-pid': [0],
  'upcall-stats': {'fail': 0, 'success': 0}}]
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for netlink families that add an optional fixed header structure
after the genetlink header and before any attributes. The fixed-header can be
specified on a per op basis, or once for all operations, which serves as a
default value that can be overridden.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for decoding attributes that contain C structs.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for decoding C arrays from binay blobs in genetlink-legacy
messages.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add python classes for struct definitions to nlspec
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5-updates-2023-03-20

mlx5 dynamic msix

This patch series adds support for dynamic msix vectors allocation in mlx5.

Eli Cohen Says:

================

The following series of patches modifies mlx5_core to work with the
dynamic MSIX API. Currently, mlx5_core allocates all the interrupt
vectors it needs and distributes them amongst the consumers. With the
introduction of dynamic MSIX support, which allows for allocation of
interrupts more than once, we now allocate vectors as we need them.
This allows other drivers running on top of mlx5_core to allocate
interrupt vectors for their own use. An example for this is mlx5_vdpa,
which uses these vectors to propagate interrupts directly from the
hardware to the vCPU [1].

As a preparation for using this series, a use after free issue is fixed
in lib/cpu_rmap.c and the allocator for rmap entries has been modified.
A complementary API for irq_cpu_rmap_add() has also been introduced.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git/patch/?id=0f2bf1fcae96a83b8c5581854713c9fc3407556e

================

* tag 'mlx5-updates-2023-03-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Provide external API for allocating vectors
  net/mlx5: Use one completion vector if eth is disabled
  net/mlx5: Refactor calculation of required completion vectors
  net/mlx5: Move devlink registration before mlx5_load
  net/mlx5: Use dynamic msix vectors allocation
  net/mlx5: Refactor completion irq request/release code
  net/mlx5: Improve naming of pci function vectors
  net/mlx5: Use newer affinity descriptor
  net/mlx5: Modify struct mlx5_irq to use struct msi_map
  net/mlx5: Fix wrong comment
  net/mlx5e: Coding style fix, add empty line
  lib: cpu_rmap: Add irq_cpu_rmap_remove to complement irq_cpu_rmap_add
  lib: cpu_rmap: Use allocator for rmap entries
  lib: cpu_rmap: Avoid use after free on rmap->obj array entries
====================

Link: https://lore.kernel.org/r/20230324231341.29808-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We don't state explicitly that reverts need to be submitted
as a patch. It occasionally comes up.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230327172646.2622943-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

clang with W=1 reports
drivers/net/ethernet/8390/axnet_cs.c:653:9: error: variable
  'xfer_count' set but not used [-Werror,-Wunused-but-set-variable]
    int xfer_count = count;
        ^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230327235423.1777590-1-trix@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>