Conflicts:
	drivers/infiniband/hw/cxgb4/device.c

The cxgb4 conflict was simply overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Null termination fix in dns_resolver got the pointer dereferncing
    wrong, fix from Ben Hutchings.

 2) ip_options_compile() has a benign but real buffer overflow when
    parsing options.  From Eric Dumazet.

 3) Table updates can crash in netfilter's nftables if none of the state
    flags indicate an actual change, from Pablo Neira Ayuso.

 4) Fix race in nf_tables dumping, also from Pablo.

 5) GRE-GRO support broke the forwarding path because the segmentation
    state was not fully initialized in these paths, from Jerry Chu.

 6) sunvnet driver leaks objects and potentially crashes on module
    unload, from Sowmini Varadhan.

 7) We can accidently generate the same handle for several u32
    classifier filters, fix from Cong Wang.

 8) Several edge case bug fixes in fragment handling in xen-netback,
    from Zoltan Kiss.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits)
  ipv4: fix buffer overflow in ip_options_compile()
  batman-adv: fix TT VLAN inconsistency on VLAN re-add
  batman-adv: drop QinQ claim frames in bridge loop avoidance
  dns_resolver: Null-terminate the right string
  xen-netback: Fix pointer incrementation to avoid incorrect logging
  xen-netback: Fix releasing header slot on error path
  xen-netback: Fix releasing frag_list skbs in error path
  xen-netback: Fix handling frag_list on grant op error path
  net_sched: avoid generating same handle for u32 filters
  net: huawei_cdc_ncm: add "subclass 3" devices
  net: qmi_wwan: add two Sierra Wireless/Netgear devices
  wan/x25_asy: integer overflow in x25_asy_change_mtu()
  net: ppp: fix creating PPP pass and active filters
  net/mlx4_en: cq->irq_desc wasn't set in legacy EQ's
  sunvnet: clean up objects created in vnet_new() on vnet_exit()
  r8169: Enable RX_MULTI_EN for RTL_GIGA_MAC_VER_40
  net-gre-gro: Fix a bug that breaks the forwarding path
  netfilter: nf_tables: 64bit stats need some extra synchronization
  netfilter: nf_tables: set NLM_F_DUMP_INTR if netlink dumping is stale
  netfilter: nf_tables: safe RCU iteration on list when dumping
  ...

Pull sparc fix from David Miller:
 "Need to hook up the new renameat2 system call"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Hook up renameat2 syscall.

Pull IDE fixes from David Miller:
 - fix interrupt registry for some Atari IDE chipsets.
 - adjust Kconfig dependencies for x86_32 specific chips.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: Fix SC1200 dependencies
  ide: Fix CS5520 and CS5530 dependencies
  m68k/atari - ide: do not register interrupt if host->get_lock is set

Merge tag 'trace-fixes-v3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull trace fix from Steven Rostedt:
 "Tony Luck found that using the "uptime" trace clock that uses jiffies
  as a counter was converted to nanoseconds (silly), and after 1 hour 11
  minutes and 34 seconds, this monotonic clock would wrap, causing havoc
  with the tracing system and making the clock useless.

  He converted that clock to use jiffies_64 and made it into a counter
  instead of nanosecond conversions, and displayed the clock with the
  straight jiffy count, which works much better than it did in the past"

* tag 'trace-fixes-v3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix wraparound problems in "uptime" trace clock

Signed-off-by: David S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
Misc. fix for cxgb4 and iw_cxgb4

This patch series adds support to enchance error reporting, log detailed
warning for negative advice, support query_qp verb and advertise correct
device max attributes for iwarp.

The patches series is created against 'net-next' tree.
And includes patches on cxgb4 and iw_cxgb4 driver.

Since this patch-series contains changes which are dependent on commit id
4c2c5763 ("cxgb4/iw_cxgb4: use firmware ord/ird resource limits") of net-next
tree we would like to request this patch series to get merged via David Miller's
'net-next' tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the size advertised by FW
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Advertise the actual max limits for things like qp depths, number of
qps, cqs, etc.

Clean up the queue allocation for qps and cqs.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Govindarajulu Varadarajan says:

====================
enic: Display classifier filters using ethtool

This series adds ethtool support to show classifier filters added by driver.

v2:
The patch 1/2 removes the $ifdef's around the filter structure. Making it
available always. So that .get_rxnfc() can be implimented without any #ifdefs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch impliments ethtool_ops->get_rxnfc() to display the classifier
filter added by the driver.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes the #ifdef CONFIG_RFS_ACCEL around the classifier filter
structures. This makes the filter structures available when CONFIG_RFS_ACCEL = n.

Introduce enic_rfs_timer_start() & enic_rfs_timer_stop() to start/stop the
timer. These two functions are nop when CONFIG_RFS_ACCEL = n.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An af_iucv stress test showed -EPIPE results for sendmsg()
calls. They are caused by quiescing a path even though it has
been already severed by peer. For IUCV transport shutdown()
consists of 2 steps:
(1) sending the shutdown message to peer
(2) quiescing the iucv path
If the iucv path between these 2 steps is severed due to peer
closing the path, the quiesce step is no longer needed.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Reported-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to display the adjacent switch port's forwarding
attributes. Currently supports info on forwarding modes '802.1'
and 'rr' (reflective relay).
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Antonio Quartulli says:

====================
pull request [net]: batman-adv 20140721

here you have two fixes that we have been testing for quite some time
(this is why they arrived a bit late in the rc cycle).

Patch 1) ensures that BLA packets get dropped and not forwarded to the
mesh even if they reach batman-adv within QinQ frames. Forwarding them
into the mesh means messing up with the TT database of other nodes which
can generate all kind of unexpected behaviours during route computation.

Patch 2) avoids a couple of race conditions triggered upon fast VLAN
deletion-addition. Such race conditions are pretty dangerous because
they not only create inconsistencies in the TT database of the nodes
in the network, but such scenario is also unrecoverable (unless
nodes are rebooted).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a benign buffer overflow in ip_options_compile spotted by
AddressSanitizer[1] :

Its benign because we always can access one extra byte in skb->head
(because header is followed by struct skb_shared_info), and in this case
this byte is not even used.

[28504.910798] ==================================================================
[28504.912046] AddressSanitizer: heap-buffer-overflow in ip_options_compile
[28504.913170] Read of size 1 by thread T15843:
[28504.914026]  [<ffffffff81802f91>] ip_options_compile+0x121/0x9c0
[28504.915394]  [<ffffffff81804a0d>] ip_options_get_from_user+0xad/0x120
[28504.916843]  [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630
[28504.918175]  [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0
[28504.919490]  [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90
[28504.920835]  [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70
[28504.922208]  [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140
[28504.923459]  [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b
[28504.924722]
[28504.925106] Allocated by thread T15843:
[28504.925815]  [<ffffffff81804995>] ip_options_get_from_user+0x35/0x120
[28504.926884]  [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630
[28504.927975]  [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0
[28504.929175]  [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90
[28504.930400]  [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70
[28504.931677]  [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140
[28504.932851]  [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b
[28504.934018]
[28504.934377] The buggy address ffff880026382828 is located 0 bytes to the right
[28504.934377]  of 40-byte region [ffff880026382800, ffff880026382828)
[28504.937144]
[28504.937474] Memory state around the buggy address:
[28504.938430]  ffff880026382300: ........ rrrrrrrr rrrrrrrr rrrrrrrr
[28504.939884]  ffff880026382400: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28504.941294]  ffff880026382500: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr
[28504.942504]  ffff880026382600: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28504.943483]  ffff880026382700: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28504.944511] >ffff880026382800: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr
[28504.945573]                         ^
[28504.946277]  ffff880026382900: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.094949]  ffff880026382a00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.096114]  ffff880026382b00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.097116]  ffff880026382c00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.098472]  ffff880026382d00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.099804] Legend:
[28505.100269]  f - 8 freed bytes
[28505.100884]  r - 8 redzone bytes
[28505.101649]  . - 8 allocated bytes
[28505.102406]  x=1..7 - x allocated bytes + (8-x) redzone bytes
[28505.103637] ==================================================================

[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernelSigned-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The link adjustment callback can be called as frequently as desired
by the PHY library, as such, let's avoid doing a Read/Modify/Write
sequence if nothing changed, since these register accesses can be
expensive.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: bcmgenet: PM and Wake-on-LAN

This patchset brings S2/S3 Power Management support to the GENET driver
as well as Wake-on-LAN using Magic Packets with or without SecureOn
passwords.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that Wake-on-LAN support mode is fully integrated into the driver,
allow an user to query and configure Wake-on-LAN in the driver.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update bcmgenet_suspend() to prepare the hardware for being put into
Wake-on-LAN mode if the device can wakeup the system, and Wake-on-LAN is
enabled. Whether we resume from Wake-on-LAN or not, make sure that
bcmgenet_resume() disables the UniMAC MagicPacket matching mode and puts
the hardware in a state where it can receive all incoming packets.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bcmgenet_wol_resume() will create an unbalanced clock state for the
wol_clk clock pointer since everywhere else in the code, we always call
clk_prepare_enable() and clk_disable_unprepare(). This function also
calls init_umac() which is neither correct nor necessary since
bcmgenet_resume() and bcmgenet_open() already does that.

Finally calling bcmgenet_wol_resume() in bcmgenet_open() is not correct,
since the interface would not have been able to put us in Wake-on-LAN
mode if it was not UP before.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Handle UMAC_IRQ_MPD_R interrupt bit in our workqueue to make sure that
we properly re-configure the GENET adapter from Wake-on-LAN.

bcmgenet_power_up() makes sure that we will not leave the UniMAC
hardware in MagicPacket matching mode, since that would prevent any
other packet from being received.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update bcmgenet_power_{up,down} to handle the case where the adapter has
been suspend respectively resumed from Wake-on-LAN using MagicPackets.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add all the required code to program the GENET hardware to enter
Wake-on-LAN mode and wake using MagicPackets with or without SecureOn
password.

This code is hooked to the build system, but is not yet referenced from
ethtool or the main bcmgenet driver.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Attempt to the request the Wake-on-LAN interrupt bit, and if successful,
advertise wakeup capability instead of doing this unconditionnally.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement suspend/resume callbacks in the GENET driver. This makes sure
that we de-initialize and re-initialize the hardware correctly before
entering suspend and when resuming.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce a bunch of helper functions: bcmgenet_netif_start,
bcmgenet_netif_stop and bcmgenet_intr_disable to help reuse code that is
going to be necessary for suspend/resume.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Factor the code touching the UniMAC RX/TX enable bits since we are going
to re-use it for implementing suspend/resume.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Checking for wol_enabled in bcmgenet_close() is bogus, since no other
code places set priv->wol_enabled. Remove that as it will conflict with
the upcoming and functional Wake-on-LAN implementation.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull media fixes from Mauro Carvalho Chehab:
 "A series of driver fixes:
   - fix DVB-S tuning with tda1071
   - fix tuner probe on af9035 when the device has a bad eeprom
   - some fixes for the new si2168/2157 drivers
   - one Kconfig build fix (for omap4iss)
   - fixes at vpif error path
   - don't lock saa7134 ioctl at driver's base core level, as it now
     uses V4L2 and VB2 locking schema
   - fix audio at hdpvr driver
   - fix the aspect ratio at the digital timings table
   - one new USB ID (at gspca_pac7302): Genius i-Look 317 webcam"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] gspca_pac7302: Add new usb-id for Genius i-Look 317
  [media] tda10071: fix returned symbol rate calculation
  [media] tda10071: fix spec inversion reporting
  [media] tda10071: add missing DVB-S2/PSK-8 FEC AUTO
  [media] tda10071: force modulation to QPSK on DVB-S
  [media] hdpvr: fix two audio bugs
  [media] davinci: vpif: missing unlocks on error
  [media] af9035: override tuner id when bad value set into eeprom
  [media] saa7134: use unlocked_ioctl instead of ioctl
  [media] media: v4l2-core: v4l2-dv-timings.c: Cleaning up code wrong value used in aspect ratio
  [media] si2168: firmware download fix
  [media] si2157: add one missing parenthesis
  [media] si2168: add one missing parenthesis
  [media] staging: tighten omap4iss dependencies

Pull block fixes from Jens Axboe:
 "Final block fixes for 3.16

  Four small fixes that should go into 3.16, have been queued up for a
  bit and delayed due to vacation and other euro duties.  But here they
  are.  The pull request contains:

   - Fix for a reported crash with shared tagging on SCSI from Christoph

   - A regression fix for drbd.  From Lars Ellenberg.

   - Hooking up the compat ioctl for BLKZEROOUT, which requires no
     translation.  From Mikulas.

- A fix for a regression where we woud crash on queue exit if the
  root_blkg is gone/not there. From Tejun"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: provide compat ioctl for BLKZEROOUT
  blkcg: don't call into policy draining if root_blkg is already gone
  drbd: fix regression 'out of mem, failed to invoke fence-peer helper'
  block: don't assume last put of shared tags is for the host

Pull libata fixes from Tejun Heo:
 "Late libata fixes.

  The most important one is from Kevin Hao which makes sure that libata
  only allocates tags inside the max tag number the controller supports.
  libata always had this problem but the recent tag allocation change
  and addition of support for sata_fsl which only supports queue depth
  of 16 exposed the issue.

  Hans de Goede agreed to become the maintainer of libahci_platform
  which is under higher than usual development pressure from all the new
  controllers popping up from the ARM world"

* 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)
  drivers/ata/pata_ep93xx.c: use signed int type for result of platform_get_irq()
  libata: EH should handle AMNF error condition as a media error
  libata: support the ata host which implements a queue depth less than 32
  MAINTAINERS: Add Hans de Goede as ahci-platform maintainer

Pull kvm fixes from Paolo Bonzini:
 "These are mostly PPC changes for 3.16-new things.  However, there is
  an x86 change too and it is a regression from 3.14.  As it only
  affects nested virtualization and there were other changes in this
  area in 3.16, I am not nominating it for 3.15-stable"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Check for nested events if there is an injectable interrupt
  KVM: PPC: RTAS: Do byte swaps explicitly
  KVM: PPC: Book3S PR: Fix ABIv2 on LE
  KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC()
  PPC: Add _GLOBAL_TOC for 32bit
  KVM: PPC: BOOK3S: HV: Use base page size when comparing against slb value
  KVM: PPC: Book3E: Unlock mmu_lock when setting caching atttribute

Pull s390 fixes from Martin Schwidefsky:
 "A couple of last minute bug fixes for 3.16, including a fix for ptrace
  to close a hole which allowed a user space program to write to the
  kernel address space"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: fix restore of invalid floating-point-control
  s390/zcrypt: improve device probing for zcrypt adapter cards
  s390/ptrace: fix PSW mask check
  s390/MSI: Use standard mask and unmask funtions
  s390/3270: correct size detection with the read-partition command
  s390: require mvcos facility, not tod clock steering facility

The "uptime" trace clock added in:

    commit 8aacf017
    tracing: Add "uptime" trace clock that uses jiffies

has wraparound problems when the system has been up more
than 1 hour 11 minutes and 34 seconds. It converts jiffies
to nanoseconds using:
        (u64)jiffies_to_usecs(jiffy) * 1000ULL
but since jiffies_to_usecs() only returns a 32-bit value, it
truncates at 2^32 microseconds.  An additional problem on 32-bit
systems is that the argument is "unsigned long", so fixing the
return value only helps until 2^32 jiffies (49.7 days on a HZ=1000
system).

Avoid these problems by using jiffies_64 as our basis, and
not converting to nanoseconds (we do convert to clock_t because
user facing API must not be dependent on internal kernel
HZ values).

Link: http://lkml.kernel.org/p/99d63c5bfe9b320a3b428d773825a37095bf6a51.1405708254.git.tony.luck@intel.com

Cc: stable@vger.kernel.org # 3.10+
Fixes: 8aacf017 "tracing: Add "uptime" trace clock that uses jiffies"
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

When a VLAN interface (on top of batX) is removed and
re-added within a short timeframe TT does not have enough
time to properly cleanup. This creates an internal TT state
mismatch as the newly created softif_vlan will be
initialized from scratch with a TT client count of zero
(even if TT entries for this VLAN still exist). The
resulting TT messages are bogus due to the counter / tt
client listing mismatch, thus creating inconsistencies on
every node in the network

To fix this issue destroy_vlan() has to not free the VLAN
object immediately but it has to be kept alive until all the
TT entries for this VLAN have been removed. destroy_vlan()
still removes the sysfs folder so that the user has the
feeling that everything went fine.

If the same VLAN is re-added before the old object is free'd,
then the latter is resurrected and re-used.

Implement such behaviour by increasing the reference counter
of a softif_vlan object every time a new local TT entry for
such VLAN is created and remove the object from the list
only when all the TT entries have been destroyed.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>

Since bridge loop avoidance only supports untagged or simple 802.1q
tagged VLAN claim frames, claim frames with stacked VLAN headers (QinQ)
should be detected and dropped. Transporting the over the mesh may cause
problems on the receivers, or create bogus entries in the local tt
tables.
Reported-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>