Skip to content

L
linux
Switch branch/tag
  1. 10 Mar, 2020 2 commits
    • Peng Fan's avatar
      clk: imx: pfdv2: switch to use determine_rate · 8ffe9c7b
      Peng Fan authored 
      Per clk_ops, compared with round_rate, determine_rate could optionally
support the parent clock that should be used to provide the clock rate.

In this patch, the parent clock is just parent->rate as round_rate.

The following patch will calculate the best parent clock.
Signed-off-by: default avatarPeng Fan <peng.fan@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
      8ffe9c7b
    • Anson Huang's avatar
      clk: imx: Fix division by zero warning on pfdv2 · 28b2f82e
      Anson Huang authored 
      Fix below division by zero warning:

[    3.176443] Division by zero in kernel.
[    3.181809] CPU: 0 PID: 88 Comm: kworker/0:2 Not tainted 5.3.0-rc2-next-20190730-63758-ge08da51-dirty #124
[    3.191817] Hardware name: Freescale i.MX7ULP (Device Tree)
[    3.197821] Workqueue: events dbs_work_handler
[    3.202849] [<c01127d8>] (unwind_backtrace) from [<c010cd80>] (show_stack+0x10/0x14)
[    3.211058] [<c010cd80>] (show_stack) from [<c0c77e68>] (dump_stack+0xd8/0x110)
[    3.218820] [<c0c77e68>] (dump_stack) from [<c0c753c0>] (Ldiv0_64+0x8/0x18)
[    3.226263] [<c0c753c0>] (Ldiv0_64) from [<c05984b4>] (clk_pfdv2_set_rate+0x54/0xac)
[    3.234487] [<c05984b4>] (clk_pfdv2_set_rate) from [<c059192c>] (clk_change_rate+0x1a4/0x698)
[    3.243468] [<c059192c>] (clk_change_rate) from [<c0591a08>] (clk_change_rate+0x280/0x698)
[    3.252180] [<c0591a08>] (clk_change_rate) from [<c0591fc0>] (clk_core_set_rate_nolock+0x1a0/0x278)
[    3.261679] [<c0591fc0>] (clk_core_set_rate_nolock) from [<c05920c8>] (clk_set_rate+0x30/0x64)
[    3.270743] [<c05920c8>] (clk_set_rate) from [<c089cb88>] (imx7ulp_set_target+0x184/0x2a4)
[    3.279501] [<c089cb88>] (imx7ulp_set_target) from [<c0896358>] (__cpufreq_driver_target+0x188/0x514)
[    3.289196] [<c0896358>] (__cpufreq_driver_target) from [<c0899b0c>] (od_dbs_update+0x130/0x15c)
[    3.298438] [<c0899b0c>] (od_dbs_update) from [<c089a5d0>] (dbs_work_handler+0x2c/0x5c)
[    3.306914] [<c089a5d0>] (dbs_work_handler) from [<c0156858>] (process_one_work+0x2ac/0x704)
[    3.315826] [<c0156858>] (process_one_work) from [<c0156cdc>] (worker_thread+0x2c/0x574)
[    3.324404] [<c0156cdc>] (worker_thread) from [<c015cfe8>] (kthread+0x134/0x148)
[    3.332278] [<c015cfe8>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
[    3.339858] Exception stack(0xe82d5fb0 to 0xe82d5ff8)
[    3.345314] 5fa0:                                     00000000 00000000 00000000 00000000
[    3.353926] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.362519] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
Signed-off-by: default avatarAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: default avatarPeng Fan <peng.fan@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
      28b2f82e
  3. 24 Feb, 2020 7 commits
  5. 19 Feb, 2020 3 commits
  7. 17 Feb, 2020 10 commits
  9. 14 Feb, 2020 5 commits
  11. 13 Feb, 2020 6 commits
  13. 10 Feb, 2020 2 commits
    • Linus Torvalds's avatar
      Linux 5.6-rc1 · bb6d3fb3
      Linus Torvalds authored
      bb6d3fb3
    • Linus Torvalds's avatar
      Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild · 89a47dd1
      Linus Torvalds authored 
      Pull more Kbuild updates from Masahiro Yamada:

 - fix randconfig to generate a sane .config

 - rename hostprogs-y / always to hostprogs / always-y, which are more
   natual syntax.

 - optimize scripts/kallsyms

 - fix yes2modconfig and mod2yesconfig

 - make multiple directory targets ('make foo/ bar/') work

* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: make multiple directory targets work
  kconfig: Invalidate all symbols after changing to y or m.
  kallsyms: fix type of kallsyms_token_table[]
  scripts/kallsyms: change table to store (strcut sym_entry *)
  scripts/kallsyms: rename local variables in read_symbol()
  kbuild: rename hostprogs-y/always to hostprogs/always-y
  kbuild: fix the document to use extra-y for vmlinux.lds
  kconfig: fix broken dependency in randconfig-generated .config
      89a47dd1
  15. 09 Feb, 2020 5 commits
    • Linus Torvalds's avatar
      Merge tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs · 380a129e
      Linus Torvalds authored 
      Pull new zonefs file system from Damien Le Moal:
 "Zonefs is a very simple file system exposing each zone of a zoned
  block device as a file.

  Unlike a regular file system with native zoned block device support
  (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
  sequential write constraint of zoned block devices to the user. As a
  result, zonefs is not a POSIX compliant file system. Its goal is to
  simplify the implementation of zoned block devices support in
  applications by replacing raw block device file accesses with a richer
  file based API, avoiding relying on direct block device file ioctls
  which may be more obscure to developers.

  One example of this approach is the implementation of LSM
  (log-structured merge) tree structures (such as used in RocksDB and
  LevelDB) on zoned block devices by allowing SSTables to be stored in a
  zone file similarly to a regular file system rather than as a range of
  sectors of a zoned device. The introduction of the higher level
  construct "one file is one zone" can help reducing the amount of
  changes needed in the application while at the same time allowing the
  use of zoned block devices with various programming languages other
  than C.

  Zonefs IO management implementation uses the new iomap generic code.
  Zonefs has been successfully tested using a functional test suite
  (available with zonefs userland format tool on github) and a prototype
  implementation of LevelDB on top of zonefs"

* tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Add documentation
  fs: New zonefs file system
      380a129e
    • Marc Zyngier's avatar
      irqchip/gic-v4.1: Avoid 64bit division for the sake of 32bit ARM · 490d332e
      Marc Zyngier authored 
      In order to allow the GICv4 code to link properly on 32bit ARM,
make sure we don't use 64bit divisions when it isn't strictly
necessary.

Fixes: 4e6437f1 ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level")
Reported-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: default avatarMarc Zyngier <maz@kernel.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      490d332e
    • Linus Torvalds's avatar
      Merge tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6 · d1ea35f4
      Linus Torvalds authored 
      Pull cifs fixes from Steve French:
 "13 cifs/smb3 patches, most from testing at the SMB3 plugfest this week:

   - Important fix for multichannel and for modefromsid mounts.

   - Two reconnect fixes

   - Addition of SMB3 change notify support

   - Backup tools fix

   - A few additional minor debug improvements (tracepoints and
     additional logging found useful during testing this week)"

* tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: Add defines for new information level, FileIdInformation
  smb3: print warning once if posix context returned on open
  smb3: add one more dynamic tracepoint missing from strict fsync path
  cifs: fix mode bits from dir listing when mounted with modefromsid
  cifs: fix channel signing
  cifs: add SMB3 change notification support
  cifs: make multichannel warning more visible
  cifs: fix soft mounts hanging in the reconnect code
  cifs: Add tracepoints for errors on flush or fsync
  cifs: log warning message (once) if out of disk space
  cifs: fail i/o on soft mounts if sessionsetup errors out
  smb3: fix problem with null cifs super block with previous patch
  SMB3: Backup intent flag missing from some more ops
      d1ea35f4
    • Linus Torvalds's avatar
      Merge branch 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 5586c3c1
      Linus Torvalds authored 
      Pull vboxfs from Al Viro:
 "This is the VirtualBox guest shared folder support by Hans de Goede,
  with fixups for fs_parse folded in to avoid bisection hazards from
  those API changes..."

* 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: Add VirtualBox guest shared folder (vboxsf) support
      5586c3c1
    • Linus Torvalds's avatar
      Merge tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 1a2a76c2
      Linus Torvalds authored 
      Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for X86:

   - Ensure that the PIT is set up when the local APIC is disable or
     configured in legacy mode. This is caused by an ordering issue
     introduced in the recent changes which skip PIT initialization when
     the TSC and APIC frequencies are already known.

   - Handle malformed SRAT tables during early ACPI parsing which caused
     an infinite loop anda boot hang.

   - Fix a long standing race in the affinity setting code which affects
     PCI devices with non-maskable MSI interrupts. The problem is caused
     by the non-atomic writes of the MSI address (destination APIC id)
     and data (vector) fields which the device uses to construct the MSI
     message. The non-atomic writes are mandated by PCI.

     If both fields change and the device raises an interrupt after
     writing address and before writing data, then the MSI block
     constructs a inconsistent message which causes interrupts to be
     lost and subsequent malfunction of the device.

     The fix is to redirect the interrupt to the new vector on the
     current CPU first and then switch it over to the new target CPU.
     This allows to observe an eventually raised interrupt in the
     transitional stage (old CPU, new vector) to be observed in the APIC
     IRR and retriggered on the new target CPU and the new vector.

     The potential spurious interrupts caused by this are harmless and
     can in the worst case expose a buggy driver (all handlers have to
     be able to deal with spurious interrupts as they can and do happen
     for various reasons).

   - Add the missing suspend/resume mechanism for the HYPERV hypercall
     page which prevents resume hibernation on HYPERV guests. This
     change got lost before the merge window.

   - Mask the IOAPIC before disabling the local APIC to prevent
     potentially stale IOAPIC remote IRR bits which cause stale
     interrupt lines after resume"

* tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Mask IOAPIC entries when disabling the local APIC
  x86/hyperv: Suspend/resume the hypercall page for hibernation
  x86/apic/msi: Plug non-maskable MSI affinity race
  x86/boot: Handle malformed SRAT tables during early ACPI parsing
  x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
      1a2a76c2
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7