- 10 Aug, 2017 20 commits
-
-
Peter Zijlstra authored
In commit: 3fed382b ("sched/numa: Implement NUMA node level wake_affine()") Rik changed wake_affine to consider NUMA information when balancing between LLC domains. There are a number of problems here which this patch tries to address: - LLC < NODE; in this case we'd use the wrong information to balance - !NUMA_BALANCING: in this case, the new code doesn't do any balancing at all - re-computes the NUMA data for every wakeup, this can mean iterating up to 64 CPUs for every wakeup. - default affine wakeups inside a cache We address these by saving the load/capacity values for each sched_domain during regular load-balance and using these values in wake_affine_llc(). The obvious down-side to using cached values is that they can be too old and poorly reflect reality. But this way we can use LLC wide information and thus not rely on assuming LLC matches NODE. We also don't rely on NUMA_BALANCING nor do we have to aggegate two nodes (or even cache domains) worth of CPUs for each wakeup. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: 3fed382b ("sched/numa: Implement NUMA node level wake_affine()") [ Minor readability improvements. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Xie XiuQi authored
Now that we have more than one place to get the task state, intruduce the task_state_to_char() helper function to save some code. No functionality changed. Signed-off-by:
Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by:
-
Xie XiuQi authored
Currently we print the runnable task in /proc/sched_debug, but there is no task state information. We don't know which task is in the runqueue and which task is sleeping. Add task state in the runnable task list, like this: runnable tasks: S task PID tree-key switches prio wait-time sum-exec sum-sleep ----------------------------------------------------------------------------------------------------------- S watchdog/239 1452 -11.917445 2811 0 0.000000 8.949306 0.000000 7 0 / S migration/239 1453 20686.367740 8 0 0.000000 16215.720897 0.000000 7 0 / S ksoftirqd/239 1454 115383.841071 12 120 0.000000 0.200683 0.000000 7 0 / >R test 21287 4872.190970 407 120 0.000000 4874.911790 0.000000 7 0 /autogroup-150 R test 21288 4868.385454 401 120 0.000000 3672.341489 0.000000 7 0 /autogroup-150 R test 21289 4868.326776 384 120 0.000000 3424.934159 0.000000 7 0 /autogroup-150 Signed-off-by:
-
Aleksa Sarai authored
It appears as though the addition of the PID namespace did not update the output code for /proc/*/sched, which resulted in it providing PIDs that were not self-consistent with the /proc mount. This additionally made it trivial to detect whether a process was inside &init_pid_ns from userspace, making container detection trivial: https://github.com/jessfraz/amicontained This leads to situations such as: % unshare -pmf % mount -t proc proc /proc % head -n1 /proc/1/sched head (10047, #threads: 1) Fix this by just using task_pid_nr_ns for the output of /proc/*/sched. All of the other uses of task_pid_nr in kernel/sched/debug.c are from a sysctl context and thus don't need to be namespaced. Signed-off-by:
Aleksa Sarai <asarai@suse.com> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Jess Frazelle <acidburn@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cyphar@cyphar.com Link: http://lkml.kernel.org/r/20170806044141.5093-1-asarai@suse.comSigned-off-by:
-
Cheng Jian authored
init_idle_bootup_task( ) is called in rest_init( ) to switch the scheduling class of the boot thread to the idle class. the function only sets: idle->sched_class = &idle_sched_class; which has been set in init_idle() called by sched_init(): /* * The idle tasks have their own, simple scheduling class: */ idle->sched_class = &idle_sched_class; We've already set the boot thread to idle class in start_kernel()->sched_init()->init_idle() so it's unnecessary to set it again in start_kernel()->rest_init()->init_idle_bootup_task() Signed-off-by:Cheng Jian <cj.chengjian@huawei.com> Signed-off-by:
-
Byungchul Park authored
cpudl_find() users are only interested in knowing if suitable CPU(s) were found or not (and then they look at later_mask to know which). Change cpudl_find() return type accordingly. Aligns with rt code. Signed-off-by:
Byungchul Park <byungchul.park@lge.com> Signed-off-by:
-
Byungchul Park authored
When cpudl_find() returns any among free_cpus, the CPU might not be closer than others, considering sched domain. For example: this_cpu: 15 free_cpus: 0, 1,..., 14 (== later_mask) best_cpu: 0 topology: 0 --+ +--+ 1 --+ | +-- ... --+ 2 --+ | | +--+ | 3 --+ | ... ... 12 --+ | +--+ | 13 --+ | | +-- ... -+ 14 --+ | +--+ 15 --+ In this case, it would be best to select 14 since it's a free CPU and closest to 15 (this_cpu). However, currently the code selects 0 (best_cpu) even though that's just any among free_cpus. Fix it. This (re)aligns the deadline behaviour with the rt behaviour. Signed-off-by: -
Rik van Riel authored
Running 80 tasks in the same group, or as threads of the same process, results in the memory getting scanned 80x as fast as it would be if a single task was using the memory. This really hurts some workloads. Scale the scan period by the number of tasks in the numa group, and the shared / private ratio, so the average rate at which memory in the group is scanned corresponds roughly to the rate at which a single task would scan its memory. Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jhladky@redhat.com Cc: lvenanci@redhat.com Link: http://lkml.kernel.org/r/20170731192847.23050-3-riel@redhat.comSigned-off-by:
-
Rik van Riel authored
The comment above update_task_scan_period() says the scan period should be increased (scanning slows down) if the majority of memory accesses are on the local node, or if the majority of the page accesses are shared with other tasks. However, with the current code, all a high ratio of shared accesses does is slow down the rate at which scanning is made faster. This patch changes things so either lots of shared accesses or lots of local accesses will slow down scanning, and numa scanning is sped up only when there are lots of private faults on remote memory pages. Signed-off-by:
-
Vincent Guittot authored
The running state is a subset of runnable state which means that running can't be set if runnable (weight) is cleared. There are corner cases where the current sched_entity has been already dequeued but cfs_rq->curr has not been updated yet and still points to the dequeued sched_entity. If ___update_load_avg() is called at that time, weight will be 0 and running will be set which is not possible. This case happens during pick_next_task_fair() when a cfs_rq becomes idles. The current sched_entity has been dequeued so se->on_rq is cleared and cfs_rq->weight is null. But cfs_rq->curr still points to se (it will be cleared when picking the idle thread). Because the cfs_rq becomes idle, idle_balance() is called and ends up to call update_blocked_averages() with these wrong running and runnable states. Add a test in ___update_load_avg() to correct the running state in this case. Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
-
Viresh Kumar authored
pick_next_task_dl() and build_sched_domain() aren't used outside deadline.c and topology.c. Make them static. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Viresh Kumar authored
The 'struct cpupri' passed to cpupri_init() is already initialized to zero. Don't do that again. Signed-off-by:
-
Viresh Kumar authored
The 'struct cpudl' passed to cpudl_init() is already initialized to zero. Don't do that again. Signed-off-by:
-
Viresh Kumar authored
There are only two callers of init_rootdomain(). One of them passes a global to it and another one sends dynamically allocated root-domain. There is no need to memset the root-domain in the first case as the structure is already reset. Update alloc_rootdomain() to allocate the memory with kzalloc() and remove the memset() call from init_rootdomain(). Signed-off-by:
-
Viresh Kumar authored
update_freq is always true and there is no need to pass it to update_cfs_rq_load_avg(). Remove it. Signed-off-by:
-
Viresh Kumar authored
Rearrange pick_next_task_fair() a bit to avoid checking cfs_rq->nr_running twice for the case where FAIR_GROUP_SCHED is enabled and the previous task doesn't belong to the fair class. Signed-off-by:
-
Viresh Kumar authored
weighted_cpuload() uses the cpu number passed to it get pointer to the runqueue. Almost all callers of weighted_cpuload() already have the rq pointer with them and can send that directly to weighted_cpuload(). In some cases the callers actually get the CPU number by doing cpu_of(rq). It would be simpler to pass rq to weighted_cpuload(). Signed-off-by:
-
Viresh Kumar authored
Reuse put_prev_task() instead of copying its implementation. Signed-off-by:
-
Viresh Kumar authored
For SMP systems, update_load_avg() calls the cpufreq update util handlers only for the top level cfs_rq (i.e. rq->cfs). But that is not the case for UP systems. update_load_avg() calls util handler for any cfs_rq for which it is called. This would result in way too many calls from the scheduler to the cpufreq governors when CONFIG_FAIR_GROUP_SCHED is enabled. Reduce the frequency of these calls by copying the behavior from the SMP case, i.e. Only call util handlers for the top level cfs_rq. Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
- 09 Aug, 2017 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "These are the pin control fixes I have gathered since the return from my vacation. They boiled in -next a while so let's get them in. Apart from the documentation build it is purely driver fixes. Which is nice. The Intel fixes seem kind of important. - Fix the documentation build as the docs were moved - Correct the UART pin list on the Intel Merrifield - Fix pin assignment and number of pins on the Marvell Armada 37xx pin controller - Cover the Setzer models in the Chromebook DMI quirk in the Intel cheryview driver so they start working - Add the missing "sim" function to the sunxi driver - Fix USB pin definitions on Uniphier Pro4 - Smatch fix for invalid reference in the zx pin control driver" * tag 'pinctrl-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: generic: update references to Documentation/pinctrl.txt pinctrl: intel: merrifield: Correct UART pin lists pinctrl: armada-37xx: Fix number of pin in south bridge pinctrl: armada-37xx: Fix the pin 23 on south bridge pinctrl: cherryview: Add Setzer models to the Chromebook DMI quirk pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver pinctrl: uniphier: fix USB3 pin assignment for Pro4 pinctrl: zte: fix dereference of 'data' in zx_set_mux() -
Mel Gorman authored
Commit 65d8fc77 ("futex: Remove requirement for lock_page() in get_futex_key()") removed an unnecessary lock_page() with the side-effect that page->mapping needed to be treated very carefully. Two defensive warnings were added in case any assumption was missed and the first warning assumed a correct application would not alter a mapping backing a futex key. Since merging, it has not triggered for any unexpected case but Mark Rutland reported the following bug triggering due to the first warning. kernel BUG at kernel/futex.c:679! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 3695 Comm: syz-executor1 Not tainted 4.13.0-rc3-00020-g307fec773ba3 #3 Hardware name: linux,dummy-virt (DT) task: ffff80001e271780 task.stack: ffff000010908000 PC is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679 LR is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679 pc : [<ffff00000821ac14>] lr : [<ffff00000821ac14>] pstate: 80000145 The fact that it's a bug instead of a warning was due to an unrelated arm64 problem, but the warning itself triggered because the underlying mapping changed. This is an application issue but from a kernel perspective it's a recoverable situation and the warning is unnecessary so this patch removes the warning. The warning may potentially be triggered with the following test program from Mark although it may be necessary to adjust NR_FUTEX_THREADS to be a value smaller than the number of CPUs in the system. #include <linux/futex.h> #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <sys/syscall.h> #include <sys/time.h> #include <unistd.h> #define NR_FUTEX_THREADS 16 pthread_t threads[NR_FUTEX_THREADS]; void *mem; #define MEM_PROT (PROT_READ | PROT_WRITE) #define MEM_SIZE 65536 static int futex_wrapper(int *uaddr, int op, int val, const struct timespec *timeout, int *uaddr2, int val3) { syscall(SYS_futex, uaddr, op, val, timeout, uaddr2, val3); } void *poll_futex(void *unused) { for (;;) { futex_wrapper(mem, FUTEX_CMP_REQUEUE_PI, 1, NULL, mem + 4, 1); } } int main(int argc, char *argv[]) { int i; mem = mmap(NULL, MEM_SIZE, MEM_PROT, MAP_SHARED | MAP_ANONYMOUS, -1, 0); printf("Mapping @ %p\n", mem); printf("Creating futex threads...\n"); for (i = 0; i < NR_FUTEX_THREADS; i++) pthread_create(&threads[i], NULL, poll_futex, NULL); printf("Flipping mapping...\n"); for (;;) { mmap(mem, MEM_SIZE, MEM_PROT, MAP_FIXED | MAP_SHARED | MAP_ANONYMOUS, -1, 0); } return 0; } Reported-and-tested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "The main thing is to allow empty id_tables for ACPI to make some drivers get probed again. It looks a bit bigger than usual because it needs some internal renaming, too. Other than that, there is a fix for broken DSTDs, a super simple enablement for ARM MPS, and two documentation fixes which I'd like to see in v4.13 already" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rephrase explanation of I2C_CLASS_DEPRECATED i2c: allow i2c-versatile for ARM MPS platforms i2c: designware: Some broken DSTDs use 1MiHz instead of 1MHz i2c: designware: Print clock freq on invalid clock freq error i2c: core: Allow empty id_table in ACPI case as well i2c: mux: pinctrl: mention correct module name in Kconfig help text
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Three patches that should go into this release. Two of them are from Paolo and fix up some corner cases with BFQ, and the last patch is from Ming and fixes up a potential usage count imbalance regression due to the recent NOWAIT work" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: don't leak preempt counter/q_usage_counter when allocating rq failed block, bfq: consider also in_service_entity to state whether an entity is active block, bfq: reset in_service_entity if it becomes idle
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "Fix two regressions in the inside-secure driver with respect to hmac(sha1)" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: inside-secure - fix the sha state length in hmac_sha1_setkey crypto: inside-secure - fix invalidation check in hmac_sha1_setkey
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "The pull requests are getting smaller, that's progress I suppose :-) 1) Fix infinite loop in CIPSO option parsing, from Yujuan Qi. 2) Fix remote checksum handling in VXLAN and GUE tunneling drivers, from Koichiro Den. 3) Missing u64_stats_init() calls in several drivers, from Florian Fainelli. 4) TCP can set the congestion window to an invalid ssthresh value after congestion window reductions, from Yuchung Cheng. 5) Fix BPF jit branch generation on s390, from Daniel Borkmann. 6) Correct MIPS ebpf JIT merge, from David Daney. 7) Correct byte order test in BPF test_verifier.c, from Daniel Borkmann. 8) Fix various crashes and leaks in ASIX driver, from Dean Jenkins. 9) Handle SCTP checksums properly in mlx4 driver, from Davide Caratti. 10) We can potentially enter tcp_connect() with a cached route already, due to fastopen, so we have to explicitly invalidate it. 11) skb_warn_bad_offload() can bark in legitimate situations, fix from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) net: avoid skb_warn_bad_offload false positives on UFO qmi_wwan: fix NULL deref on disconnect ppp: fix xmit recursion detection on ppp channels rds: Reintroduce statistics counting tcp: fastopen: tcp_connect() must refresh the route net: sched: set xt_tgchk_param par.net properly in ipt_init_target net: dsa: mediatek: add adjust link support for user ports net/mlx4_en: don't set CHECKSUM_COMPLETE on SCTP packets qed: Fix a memory allocation failure test in 'qed_mcp_cmd_init()' hysdn: fix to a race condition in put_log_buffer s390/qeth: fix L3 next-hop in xmit qeth hdr asix: Fix small memory leak in ax88772_unbind() asix: Ensure asix_rx_fixup_info members are all reset asix: Add rx->ax_skb = NULL after usbnet_skb_return() bpf: fix selftest/bpf/test_pkt_md_access on s390x netvsc: fix race on sub channel creation bpf: fix byte order test in test_verifier xgene: Always get clk source, but ignore if it's missing for SGMII ports MIPS: Add missing file for eBPF JIT. bpf, s390: fix build for libbpf and selftest suite ... -
Willem de Bruijn authored
skb_warn_bad_offload triggers a warning when an skb enters the GSO stack at __skb_gso_segment that does not have CHECKSUM_PARTIAL checksum offload set. Commit b2504a5d ("net: reduce skb_warn_bad_offload() noise") observed that SKB_GSO_DODGY producers can trigger the check and that passing those packets through the GSO handlers will fix it up. But, the software UFO handler will set ip_summed to CHECKSUM_NONE. When __skb_gso_segment is called from the receive path, this triggers the warning again. Make UFO set CHECKSUM_UNNECESSARY instead of CHECKSUM_NONE. On Tx these two are equivalent. On Rx, this better matches the skb state (checksum computed), as CHECKSUM_NONE here means no checksum computed. See also this thread for context: http://patchwork.ozlabs.org/patch/799015/ Fixes: b2504a5d ("net: reduce skb_warn_bad_offload() noise") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
qmi_wwan_disconnect is called twice when disconnecting devices with separate control and data interfaces. The first invocation will set the interface data to NULL for both interfaces to flag that the disconnect has been handled. But the matching NULL check was left out when qmi_wwan_disconnect was added, resulting in this oops: usb 2-1.4: USB disconnect, device number 4 qmi_wwan 2-1.4:1.6 wwp0s29u1u4i6: unregister 'qmi_wwan' usb-0000:00:1d.0-1.4, WWAN/QMI device BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0 IP: qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan] PGD 0 P4D 0 Oops: 0000 [#1] SMP Modules linked in: <stripped irrelevant module list> CPU: 2 PID: 33 Comm: kworker/2:1 Tainted: G E 4.12.3-nr44-normandy-r1500619820+ #1 Hardware name: LENOVO 4291LR7/4291LR7, BIOS CBET4000 4.6-810-g50522254fb 07/21/2017 Workqueue: usb_hub_wq hub_event [usbcore] task: ffff8c882b716040 task.stack: ffffb8e800d84000 RIP: 0010:qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan] RSP: 0018:ffffb8e800d87b38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8c8824f3f1d0 RDI: ffff8c8824ef6400 RBP: ffff8c8824ef6400 R08: 0000000000000000 R09: 0000000000000000 R10: ffffb8e800d87780 R11: 0000000000000011 R12: ffffffffc07ea0e8 R13: ffff8c8824e2e000 R14: ffff8c8824e2e098 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c8835300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e0 CR3: 0000000229ca5000 CR4: 00000000000406e0 Call Trace: ? usb_unbind_interface+0x71/0x270 [usbcore] ? device_release_driver_internal+0x154/0x210 ? qmi_wwan_unbind+0x6d/0xc0 [qmi_wwan] ? usbnet_disconnect+0x6c/0xf0 [usbnet] ? qmi_wwan_disconnect+0x87/0xc0 [qmi_wwan] ? usb_unbind_interface+0x71/0x270 [usbcore] ? device_release_driver_internal+0x154/0x210 Reported-and-tested-by:
Nathaniel Roach <nroach44@gmail.com> Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Guillaume Nault authored
Commit e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp devices") dropped the xmit_recursion counter incrementation in ppp_channel_push() and relied on ppp_xmit_process() for this task. But __ppp_channel_push() can also send packets directly (using the .start_xmit() channel callback), in which case the xmit_recursion counter isn't incremented anymore. If such packets get routed back to the parent ppp unit, ppp_xmit_process() won't notice the recursion and will call ppp_channel_push() on the same channel, effectively creating the deadlock situation that the xmit_recursion mechanism was supposed to prevent. This patch re-introduces the xmit_recursion counter incrementation in ppp_channel_push(). Since the xmit_recursion variable is now part of the parent ppp unit, incrementation is skipped if the channel doesn't have any. This is fine because only packets routed through the parent unit may enter the channel recursively. Finally, we have to ensure that pch->ppp is not going to be modified while executing ppp_channel_push(). Instead of taking this lock only while calling ppp_xmit_process(), we now have to hold it for the full ppp_channel_push() execution. This respects the ppp locks ordering which requires locking ->upl before ->downl. Fixes: e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp devices") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Håkon Bugge authored
In commit 7e3f2952 ("rds: don't let RDS shutdown a connection while senders are present"), refilling the receive queue was removed from rds_ib_recv(), along with the increment of s_ib_rx_refill_from_thread. Commit 73ce4317 ("RDS: make sure we post recv buffers") re-introduces filling the receive queue from rds_ib_recv(), but does not add the statistics counter. rds_ib_recv() was later renamed to rds_ib_recv_path(). This commit reintroduces the statistics counting of s_ib_rx_refill_from_thread and s_ib_rx_refill_from_cq. Signed-off-by:
Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by:
Knut Omang <knut.omang@oracle.com> Reviewed-by:
Wei Lin Guay <wei.lin.guay@oracle.com> Reviewed-by:
Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Eric Dumazet authored
With new TCP_FASTOPEN_CONNECT socket option, there is a possibility to call tcp_connect() while socket sk_dst_cache is either NULL or invalid. +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 4 +0 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 setsockopt(4, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0 +0 connect(4, ..., ...) = 0 << sk->sk_dst_cache becomes obsolete, or even set to NULL >> +1 sendto(4, ..., 1000, MSG_FASTOPEN, ..., ...) = 1000 We need to refresh the route otherwise bad things can happen, especially when syzkaller is running on the host :/ Fixes: 19f6d3f3 ("net/tcp-fastopen: Add new API support") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by:
Wei Wang <weiwan@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Xin Long authored
Now xt_tgchk_param par in ipt_init_target is a local varibale, par.net is not initialized there. Later when xt_check_target calls target's checkentry in which it may access par.net, it would cause kernel panic. Jaroslav found this panic when running: # ip link add TestIface type dummy # tc qd add dev TestIface ingress handle ffff: # tc filter add dev TestIface parent ffff: u32 match u32 0 0 \ action xt -j CONNMARK --set-mark 4 This patch is to pass net param into ipt_init_target and set par.net with it properly in there. v1->v2: As Wang Cong pointed, I missed ipt_net_id != xt_net_id, so fix it by also passing net_id to __tcf_ipt_init. v2->v3: Missed the fixes tag, so add it. Fixes: ecb2421b ("netfilter: add and use nf_ct_netns_get/put") Reported-by:Jaroslav Aster <jaster@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
John Crispin authored
Manually adjust the port settings of user ports once PHY polling has completed. This patch extends the adjust_link callback to configure the per port PMCR register, applying the proper values polled from the PHY. Without this patch flow control was not always getting setup properly. Signed-off-by:
Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com> Signed-off-by:
Muciri Gatimu <muciri@openmesh.com> Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
-
Davide Caratti authored
if the NIC fails to validate the checksum on TCP/UDP, and validation of IP checksum is successful, the driver subtracts the pseudo-header checksum from the value obtained by the hardware and sets CHECKSUM_COMPLETE. Don't do that if protocol is IPPROTO_SCTP, otherwise CRC32c validation fails. V2: don't test MLX4_CQE_STATUS_IPV6 if MLX4_CQE_STATUS_IPV4 is set Reported-by:
Shuang Li <shuali@redhat.com> Fixes: f8c6455b ("net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
- 08 Aug, 2017 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "Third set of -rc fixes for 4.13 cycle - small set of miscellanous fixes - a reasonably sizable set of IPoIB fixes that deal with multiple long standing issues" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/hns: checking for IS_ERR() instead of NULL RDMA/mlx5: Fix existence check for extended address vector IB/uverbs: Fix device cleanup RDMA/uverbs: Prevent leak of reserved field IB/core: Fix race condition in resolving IP to MAC IB/ipoib: Notify on modify QP failure only when relevant Revert "IB/core: Allow QP state transition from reset to error" IB/ipoib: Remove double pointer assigning IB/ipoib: Clean error paths in add port IB/ipoib: Add get statistics support to SRIOV VF IB/ipoib: Add multicast packets statistics IB/ipoib: Set IPOIB_NEIGH_TBL_FLUSH after flushed completion initialization IB/ipoib: Prevent setting negative values to max_nonsrq_conn_qp IB/ipoib: Make sure no in-flight joins while leaving that mcast IB/ipoib: Use cancel_delayed_work_sync when needed IB/ipoib: Fix race between light events and interface restart -
Joe Perches authored
Allow any number of command line arguments to match either the section header or the section contents and create new files. Create MAINTAINERS.new and SECTION.new. This allows scripting of the movement of various sections from MAINTAINERS. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Instead of reading STDIN and writing STDOUT, use specific filenames of MAINTAINERS and MAINTAINERS.new. Use hash references instead of global hash %hash so future modifications can read and write specific hashes to split up MAINTAINERS into multiple files using a script. Signed-off-by:
-
Joe Perches authored
Section [A-Z]: patterns are not currently in any required sorting order. Add a specific sorting sequence to MAINTAINERS entries. Sort F: and X: patterns in alphabetic order. The preferred section ordering is: SECTION HEADER M: Maintainers R: Reviewers P: Named persons without email addresses L: Mailing list addresses S: Status of this section (Supported, Maintained, Orphan, etc...) W: Any relevant URLs T: Source code control type (git, quilt, etc) Q: Patchwork patch acceptance queue site B: Bug tracking URIs C: Chat URIs F: Files with wildcard patterns (alphabetic ordered) X: Excluded files with wildcard patterns (alphabetic ordered) N: Files with regex patterns K: Keyword regexes in source code for maintainership identification Miscellaneous perl neatening: - Rename %map to %hash, map has a different meaning in perl - Avoid using \& and local variables for function indirection - Use return for a little c like clarity - Use c-like function call style instead of &function Signed-off-by:
-
Joe Perches authored
Allow for MAINTAINERS to become a directory and if it is, read all the files in the directory for maintained sections. Optionally look for all files named MAINTAINERS in directories excluding the .git directory by using --find-maintainer-files. This optional feature adds ~.3 seconds of CPU on an Intel i5-6200 with an SSD. Miscellanea: - Create a read_maintainer_file subroutine from the existing code - Test only the existence of MAINTAINERS, not whether it's a file Signed-off-by:
-
Randy Dunlap authored
The openbmc mailing list is moderated for non-subscribers. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by:
Brendan Higgins <brendanhiggins@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Joel Stanley <joel@jms.id.au> Signed-off-by:
-
