We need to start parsing stuff from the tail end of the LFP data block.
This is made awkward by the fact that the fp_timing table has variable
size. So we must use a bit more finesse to get the tail end, and to
make sure we allocate enough memory for it to make sure our struct
representation fits.

v2: Rebase due to the preallocation of BDB blocks
v3: Rebase due to min_size WARN relocation
v4: Document BDB_LVDS_LFP_DATA vs. BDB_LVDS_LFP_DATA_PTRS order (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-4-ville.syrjala@linux.intel.com

Modern VBTs no longer contain the LFP data table pointers
block (41). We are expecting to have one in order to be able
to parse the LFP data block (42), so let's make one up.

Since the fp_timing table has variable size we must somehow
determine its size. Rather than just hardcode it we look for
the terminator bytes (0xffff) to figure out where each table
entry starts. dvo_timing, panel_pnp_id, and panel_name are
expected to have fixed size.

This has been observed on various machines, eg. TGL with BDB
version 240, CML with BDB version 231, etc. The most recent
VBT I've observed that still had block 41 had BDB version
228. So presumably the cutoff (if an exact cutoff even exists)
is somewhere around BDB version 229-231.

v2: kfree the thing we allocated, not the thing+3 bytes
v3: Do the debugprint only if we found the LFP data block
v4: Fix t0 null check (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-3-ville.syrjala@linux.intel.com

Reorder things so that we can parse the entier LFP data block
in one go. For now we just stick to parsing the DTD from it.

Also fix the misleading comment about block 42 being deprecated.
Only the DTD part is deprecated, the rest is still very much needed.

v2: Move the version check+comment into parse_generic_dtd() (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-2-ville.syrjala@linux.intel.com

Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head, or that we aren't copying
over another mode's list head.

Based on the following cocci script, with manual fixups:
@decl@
identifier M;
expression E;
@@
- struct drm_display_mode M = E;
+ struct drm_display_mode M;

@@
identifier decl.M;
expression decl.E;
statement S, S1;
@@
struct drm_display_mode M;
... when != S
+ drm_mode_init(&M, &E);
+
S1

@@
expression decl.E;
@@
- &*E
+ E
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-19-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

Make sure each DDI platform has sane ->get_buf_trans initialized.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503082134.4128355-1-jani.nikula@intel.com

Using compound literals for initialization can be tricky. Lacking a
const qualifier, they won't end up in rodata, which is probably not
expected or intended. Add const to move a whopping 136 initializers to
rodata.

Compare:

$ objdump --syms drivers/gpu/drm/i915/display/intel_display_power_map.o | grep "\.rodata.*__compound_literal"
$ objdump --syms drivers/gpu/drm/i915/display/intel_display_power_map.o | grep "\.data.*__compound_literal"

Before and after the change.

Fixes: c32ffce4 ("drm/i915: Convert the power well descriptor domain mask to an array of domains")
Fixes: 4a845ff0 ("drm/i915: Simplify power well definitions by adding power well instances")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429142140.2671828-1-jani.nikula@intel.com

gvt-next-2022-04-29

Introduce fixes from previous pull.
- Fix a compiling warning of non-static funtion only having one caller.
- Fix a potential NULL pointer reference in the code re-factor.
- Fix a compiling error when CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: "Wang, Zhi A" <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c2fc678-2e6e-a9d5-a540-2a6bfda31196@intel.com

Fix following coccicheck error:
./drivers/gpu/drm/i915/gvt/handlers.c:2925:35-41: ERROR: block is NULL but dereferenced.

Use gvt->mmio.mmio_block instead of block to avoid NULL pointer
dereference when find_mmio_block returns NULL.

Fixes: e0f74ed4 ("i915/gvt: Separate the MMIO tracking table from GVT-g")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220427115457.836729-1-wanjiabing@vivo.comReviewed-by: Zhi Wang <zhi.a.wang@intel.com>

A compiling error was reported when CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n.
Fix the problem by using the pre-defined macro.

Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220427212849.18109-2-zhi.a.wang@intel.comReviewed-by: Jani Nikula <jani.nikula@linux.intel.com>

After the refactor of GVT-g, the reference of intel_gvt_match_device()
only happens in handlers.c. Make it static to let the compiler be
happy.

Fixes: e0f74ed4 ("i915/gvt: Separate the MMIO tracking table from GVT-g")
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Robert Beckett <bob.beckett@collabora.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220427212849.18109-1-zhi.a.wang@intel.comReviewed-by: Cc: Jani Nikula <jani.nikula@linux.intel.com>

The IDs added here are the subset reserved for 'motherboard down'
designs of DG2.  We have all the necessary support upstream to enable
these now (although they'll continue to require force_probe until the
usual requirements are met).

The remaining DG2 IDs for add-in cards will come in a future patch once
some additional required functionality has fully landed.

Bspec: 44477
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425211251.77154-3-matthew.d.roper@intel.com

To avoid AUX timeouts and subsequent spurious hotplug interrupts, make
sure that the first DPCD access during detection is a read from an LTTPR
register.

Some ADLP DP link configuration at least with multiple LTTPRs expects
the first DPCD access during the LTTPR/DPCD detection after hotplug to
be a read from the LTTPR range starting with
DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV. The side effect of
this read is to put each LTTPR into the LTTPR transparent or LTTPR
non-transparent mode.

The lack of the above read may leave some of the LTTPRs in non-LTTPR
mode, while other LTTPRs in LTTPR transparent or LTTPR non-transparent
mode (for instance LTTPRs after system suspend/resume that kept their
mode from before suspend). Due to the different AUX timeouts the
different modes imply, the DPCD access from a non-LTTPR range will
timeout and lead to an LTTPR generated hotplug towards the source (which
the LTTPR firmware uses to account for buggy TypeC adapters with a long
wake-up delay).

SYSCROS: 72939

v2: Keep DPCD read-out working on non-LTTPR platforms.
v3: Summarize what and why the patch does at the beginning of the commit
    log. (Jani)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220408224629.845887-1-imre.deak@intel.com

Need to bring commit d8bb92e7 ("drm/dp: Factor out a function to
probe a DPCD address") back as a dependency to further work in
drm-intel-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

gvt-next-2022-04-26

- Add two missing exports of symbols when i915 debug is enabled
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: "Wang, Zhi A" <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c5cf6773-e7a2-8ba8-4cde-0bb14007bc6b@intel.com

When CONFIG_DRM_I915_DEBUG_RUNTIME and CONFIG_DRM_I915_DEBUG_PM
are enabled, two more extra symols in i915 are required to be
exported.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220425220331.24865-1-zhi.a.wang@intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

Start splitting the .compute_crtc_clock() into two parts; one
part does the computation, the second part does the shared dpll
assignment. I want to move the actual computation part much earlier
into the compute_config() phase.

v2: dg2_crtc_get_shared_dpll() not needed (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-10-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

DG2 doesn't currently used the shared_dpll stuff so let's just
split it out from hsw_crtc_compute_clock() entirely.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-9-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

Clear the dpll_hw_state when we're about disable the pipe.
Previously it looks like we just left the old junk in there.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-8-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

All .crtc_compute_clock() implementations do the same memset() to
clear the dpll_hw_state (since we preserve it across
intel_crtc_prepare_cleared_state()). Move the memset() to the common
wrapper.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-7-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

Move some checks into intel_dpll_crtc_compute_clock() from the
caller. Avoids the caller from having to worry about all this
crap.

We'll also reorder the hw.enable vs. shared_dpll checks since
it makes sense to sanity check that we've cleared out the
old shared_dpll even if the pipe is getting disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-6-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

Pass the full atomic state+crtc rather than the redundant
crtc+crtc_state pair. We already need the full atomic state
in the hsw+ codepath anyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-5-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

All platforms have dpll_funcs. Remove the pointless NULL checks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-4-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

Stop passing around the drm_device and just pass the
dev_priv instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-3-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

Get rid of the confusing back and forth between bools and ints
in the .get_dplls() stuff. Just make everything return an int.

Initial conversion done with cocci, with some manual fixups on top:
@find@
identifier func !~ "get_hw_state|_is_|needed";
typedef bool;
parameter list[N] P;
@@
- bool
+ int
 func(P)
{
<...
(
- return true;
+ return 0;
|
- return false;
+ return -EINVAL;
)
...>
}

@@
identifier find.func;
expression list[find.N] E;
expression X;
@@
- if (!func(E))
+ ret = func(E);
+ if (ret)
  {
  ...
- return X;
+ return ret;
  }

@@
identifier find.func;
expression X;
expression list[find.N] E;
@@
- if (!func(E))
+ ret = func(E);
+ if (ret)
- return X;
+ return ret;

@@
identifier find.func;
expression list[find.N] E;
expression O, X;
typedef bool;
bool B;
@@
- B = func(E);
- if (O && !B)
+ if (O) {
+ ret = func(E);
+ if (ret)
- return X;
+ return ret;
+ }

@@
identifier find.func;
expression list[find.N] E;
expression O, X;
@@
- if (O && !func(E))
+ if (O) {
+ ret = func(E);
+ if (ret)
- return X;
+ return ret;
+ }

@@
identifier find.func;
expression list[find.N] E;
expression X;
typedef bool;
bool B;
@@
- B = func(E);
- if (!B)
+ ret = func(E);
+ if (ret)
  {
  ...
- return X;
+ return ret;
  }
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-2-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

intel_fbc_check_plane() is supposed to an int, not a boolean.
So replace the bogus 'return false's with the correct 'return 0's.
These were accidental copy-paste mistakes when the code got moved
into intel_fbc_check_plane() from somewhere else tht did return
a boolean.

No functional issue here since false==0.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413152852.7336-2-ville.syrjala@linux.intel.comReviewed-by: Manasi Navare <manasi.d.navare@intel.com>

plane_state->uapi.crtc is not what we want to be looking at.
If bigjoiner is used hw.crtc is what tells us what crtc the plane
is supposedly using.

Not an actual problem on current hardware as the only FBC capable
pipe (A) can't be a bigjoiner slave and thus uapi.crtc==hw.crtc
always here. But when we get more FBC instances this will become
actually important.

Fixes: 2e6c99f8 ("drm/i915/fbc: Nuke lots of crap from intel_fbc_state_cache")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413152852.7336-1-ville.syrjala@linux.intel.comReviewed-by: Manasi Navare <manasi.d.navare@intel.com>

Fix typo in the _SEL_FETCH_PLANE_BASE_1_B register base address.

Fixes: a5523e2f ("drm/i915: Add PSR2 selective fetch registers")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/5400
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421162221.2261895-1-imre.deak@intel.com

Merge tag 'gvt-next-2022-04-21-for-christoph' of https://github.com/intel/gvt-linux into drm-intel-next

gvt-next-2022-04-21-for-christoph

- Separating the MMIO table from GVT-g. (Zhi)
- GVT-g re-factor. (Christoph)
- GVT-g mdev API cleanup. (Jason)
- GVT-g trace/makefile cleanup. (Jani)

[Jani: added #include to adapt to header refactoring in drm-intel-next]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: "Wang, Zhi A" <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/25a713cd-0b7d-4c09-7d91-4f4ef6c9eb11@intel.com

drm-misc-next for 5.19-rc1

UAPI Changes:

Cross-subsystem Changes:
  - of: Create a platform_device for offb

Core Changes:
  - edid: block read refactoring
  - ttm: Add common debugfs code for resource managers

Driver Changes:
  - bridges:
    - adv7611: Enable DRM_BRIDGE_OP_HPD if there's an interrupt
    - anx7625: Fill ELD if no monitor is connected
    - dw_hdmi: Add General Parallel Audio support
    - icn6211: Add data-lanes DT property
    - new driver: Lontium LT9211
  - nouveau: make some structures static
  - tidss: Reset DISPC on startup
  - solomon: SPI Support and DT bindings improvements
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421065948.2pyp3j7acxtl6pz5@houat

We have now seen panel (XMG Core 15 e21 laptop) advertizing support
for Intel proprietary eDP backlight control via DPCD registers, but
actually working only with legacy pwm control.

This patch adds panel EDID check for possible HDR static metadata and
Intel proprietary eDP backlight control is used only if that exists.
Missing HDR static metadata is ignored if user specifically asks for
Intel proprietary eDP backlight control via enable_dpcd_backlight
parameter.

v2 :
- Ignore missing HDR static metadata if Intel proprietary eDP
  backlight control is forced via i915.enable_dpcd_backlight
- Printout info message if panel is missing HDR static metadata and
  support for Intel proprietary eDP backlight control is detected

Fixes: 4a8d7990 ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5284
Cc: Lyude Paul <lyude@redhat.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Filippo Falezza <filippo.falezza@outlook.it>
Cc: stable@vger.kernel.org
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413082826.120634-1-jouni.hogander@intel.comReviewed-by: Lyude Paul <lyude@redhat.com>

This is no longer used, remove it.

All usages were moved over to either use container_of() from a vfio_device
or to use dev_drvdata() directly on the mdev.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-35-hch@lst.deReviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

The device creator is supposed to use the dev.groups value to add sysfs
files before device_add is called, not call sysfs_create_files() after
device_add() returns. This creates a race with uevent delivery where the
extra attribute will not be visible.

This was being done because the groups had been co-opted by the mdev
driver, now that prior patches have moved the driver's groups to the
struct device_driver the dev.group is properly free for use here.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-34-hch@lst.deReviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

The last useful member in this struct is the supported_type_groups, move
it to the mdev_driver and delete mdev_parent_ops.

Replace it with mdev_driver as an argument to mdev_register_device()
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-33-hch@lst.deReviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

This is only used by one sample to print a fixed string that is pointless.

In general, having a device driver attach sysfs attributes to the parent
is horrific. This should never happen, and always leads to some kind of
liftime bug as it become very difficult for the sysfs attribute to go back
to any data owned by the device driver.

Remove the general mechanism to create this abuse.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-32-hch@lst.deReviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

Now that all mdev drivers directly create their own mdev_device driver and
directly register with the vfio core's vfio_device_ops this is all dead
code.

Delete vfio_mdev.c and the mdev_parent_ops members that are connected to
it.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-31-hch@lst.deReviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

The code in both files is deeply interconnected, so merge it and
keep a bunch of structures and functions static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-30-hch@lst.deReviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

This is straightforward conversion, the intel_vgpu already has a pointer
to the vfio_dev, which can be replaced with the embedded structure and
we can replace all the mdev_get_drvdata() with a simple container_of().

Based on an patch from Jason Gunthorpe.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-29-hch@lst.deReviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

Merge these into their only callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-28-hch@lst.deReviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

Pass the structure we actually care about instead of deriving it from
the mdev_device in the lower level code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-27-hch@lst.deReviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

Initialize variables at declaration time, avoid pointless gotos and
cater for the fact that intel_gvt_create_vgpu can't return NULL.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-26-hch@lst.deReviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>