The rmi4 touchscreen driver encloses the power-management
functions in #ifdef CONFIG_PM, but the smtcfb_pci_suspend/resume
functions are only really used when CONFIG_PM_SLEEP is also
set, as a frequent gcc warning shows:

ste_rmi4/synaptics_i2c_rmi4.c:1050:12: warning: 'synaptics_rmi4_suspend' defined but not used
ste_rmi4/synaptics_i2c_rmi4.c:1084:12: warning: 'synaptics_rmi4_resume' defined but not used

This changes the driver to remove the #ifdef and instead mark
the functions as __maybe_unused, which is a nicer anyway, as it
provides build testing for all the code in all configurations
and is harder to get wrong.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This synaptics_rmi4_platform_data structure is never modified, so declare
it as const.  Others are already const.

Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use to_delayed_work() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes a couple of issues detected by checkpatch with regard to blank lines.
Signed-off-by: Amadeusz Pawlik <potrzebye@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remove multiple blank lines to fix some checkpatch checks
Signed-off-by: Christian Colic <colic.christian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The rtllib driver is not calling try_module_get() when loading the
encryption modules. Because of this, you can never remove the module
once you have used it one (i.e. bring up the wireless interface).
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Tested-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the led_classdev_register() with the platform managed version
devm_led_classdev_register() & henceforth remove the redundant
nvec_paz00_remove() function.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes a couple of checkpatch warnings about block comments.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl issue

CHECK: Blank lines aren't necessary before a close brace
Signed-off-by: SirnamSwetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch issue.

CHECK: Please don't use multiple blank lines
Signed-off-by: SirnamSwetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clean up checkpatch warning:
WARNING: Block comments use * on subsequent lines
Signed-off-by: Byeoungwook Kim <quddnr145@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed all checkpatch-warnings concerning typos in r8192U_core.c.
Signed-off-by: Yannik Schmidt <yannik.schmidt@thermoscan.de>
Signed-off-by: Lukas Lehnert <lukas.lehnert@web.de>
CC: linux-kernel@i4.cs.fau.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use to_delayed_work() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes following compiler warning:

drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c: In function
‘RxReorderIndicatePacket’:
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c:758:1: warning: the
frame size of 1064 bytes is larger than 1024 bytes
[-Wframe-larger-than=]

It replaces the statically allocated array prxbIndicateArray with
a kmalloc'd one.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change block comments to comply with checkpatch style
guidelines.
Signed-off-by: Gavin Thomas Claugus <gclaugus@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use list_first_entry_or_null() instead of list_empty() + LIST_CONTAINOR()
to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Warning:Comparisons should place the constant on the right side of the test
Fixed by placing the comparisions constant on right side of the test.
Signed-off-by: Rakhi Sharma <rakhish1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

->KeyMaterial is declared as a 16 byte array, but we only ever allocate
either 5 or 13 bytes of it.  The problem is that we memset() all 16
bytes to zero so we're memsetting past the end of the allocated memory.

I fixed this in slightly lazy way, by just allocating 16 bytes.  This
works but there is a lot more cleanup you could do to this code if you
wanted.  Which is why this code is in staging.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The conversion from void pointer to any other pointer type is guaranteed
by the C programming language.

The semantic patch used to find this:

@r@
expression x;
void* e;
type T;
identifier f;
@@

(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)
Signed-off-by: Lucas Tanure <tanure@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is an API consolidation only. The use of kmalloc + memset to 0
here is equivalent to kzalloc.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cancel pending URBs during suspend operation to avoid receiving ESHUTDOWN
in read/write completion callbacks while the device is suspended.

Receiving ESHUTDOWN in read/write completion callbacks will cause the
driver to enter a non-functioning "stopped" state from which the driver is
unable to recover without reloading the module.
Signed-off-by: Hemmo Nieminen <hemmo.nieminen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes ugly and unnecessary declarations.
Signed-off-by: Mauro Dreissig <mukadr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* Remove unused CamelCase in order to get rid of the corresponding
  checkpatch.pl "CHECK: Avoid CamelCase: <IEEE80211_QoS_DATAGRP>"
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* Fix alignment which did not match open parenthesis
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* Fix checkpatch.pl output about not including the paragraph
  about writing to the Free Software Foundation's mailing address
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* Add missing spaces around bitwise OR operation in order to get
  rid of checkpatch.pl's "CHECK: spaces preferred around that '|'"
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* Replace all occurences of (1<<x) by BIT(x) in order to get rid
  of checkpatch.pl "CHECK" output "Prefer using the BIT macro"
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* Remove multiple blank lines in order to get rid of checkpatch.pl
  "CHECK" output
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove wrapper function mfree_sta_priv_lock() that can be replaced by a
direct call to mfree_all_stainfo().
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes checkpatch.pl warning in rtw_mlme_ext.c file.
WARNING: void function return statements are not generally useful
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

use %pM and %ph specifiers instead of placing each byte on stack.
(staging/rtl8723au/TODO)
Signed-off-by: Daniil Leshchev <meleodr@gmail.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Previosly the function had the following prototype:
int rtl8723a_set_rssi_cmd(struct rtw_adapter *padapter, u8 *param)

My suggestion here is to modify the prototype this way:
int rtl8723a_set_rssi_cmd(struct rtw_adapter *padapter, u32 param)

We can do this based on the following considerations:
1. rtl8723a_set_rssi_cmd is used only with 32-bit "param" values
2. There's no point in using "u8 *param" until we pass param length
3. As we just read "param", it's ok to pass it by value
Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed four spelling errors.
Signed-off-by: Jiading Gai <jiading.gai.github@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

That patch adds support for SSD1325 controller.
That is 4bpp grayscale OLED display controller present in several
displays eq: Winstar WEX012864
Signed-off-by: Alexey Mednyy <swexru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

That patch adds support for SSD1305 controller.
That is monochrome OLED display controller present in several
displays eq: Winstar WEX012864
Signed-off-by: Alexey Mednyy <swexru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use to_platform_device() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use to_spi_device() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch makes use of the standard MIPI Display Command Set to remove
some of duplicate defines from the headers.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>