- 22 Oct, 2019 19 commits
-
-
Chris Wilson authored
Forcewake is the speciality of the GT, so it is natural to run the intel_uncore_forcewake tests over the GT. So pass intel_gt as the parameter to our selftests. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022131016.9065-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The context details which engines to use, so use the ctx->engines[] to generate the requests to cause the context switch. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022130221.20644-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Again we wish to operate on the engines, which are owned by the intel_gt. As such it is easier, and much more consistent, to pass the intel_gt parameter. v2: Unexport i915_gem_load_power_context() Signed-off-by:
-
Chris Wilson authored
Separate each object class into a separate lock type to avoid lockdep cross-contamination between paths (i.e. userptr!). Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022144501.26486-1-chris@chris-wilson.co.uk
-
James Ausmus authored
Even the AML devices that behave like CFLs can be paired with an SPT PCH. Allow this to happen without blowing up dmesg. BSpec: 33665 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112013 Cc: Quanxian Wang <quanxian.wang@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
James Ausmus <james.ausmus@intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191017194203.9645-1-james.ausmus@intel.com
-
Chris Wilson authored
The actual conditions are that we know the GPU is not accessing the context, and we hold a pin on the context image to allow CPU access. We used a fake lock on ce->pin_mutex so that we could try and use lockdep to assert that access is serialised, but the various different hardirq/softirq contexts where we need to *fake* holding the pin_mutex are causing more trouble. Still it would be nice if we did have a way to reassure ourselves that the direct update to the context image is serialised with GPU execution. In the meantime, stop lockdep complaining about false irq inversions. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111923Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022122845.25038-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Loop over all engines, issuing a request for the object on each in order to make sure we leave no stone unturned when creating an active ref. The purpose is to make sure that we can reap a zombie object (one that is only alive due to an active reference on the GPU) no matter where that active reference emanates from. Signed-off-by:
-
Tvrtko Ursulin authored
Contexts are not testing physical engines so it makes sense to use the uabi iterator. Signed-off-by:
-
Tvrtko Ursulin authored
Frees up two call sites from passing i915 to for_each_engine. Signed-off-by:
-
Tvrtko Ursulin authored
Just freeing up two more call sites from passing in i915 to for_each_engine. Signed-off-by:
-
Tvrtko Ursulin authored
Convert the test code to work directly on what it needs rather than going through the top-level i915. This enables another natural usage for for_each_engine(.., gt, ..). Signed-off-by:
-
Tvrtko Ursulin authored
Just compartmentalizes code a bit more. Signed-off-by:
-
Tvrtko Ursulin authored
Engines belong to the GT so make it indicative in the API. Signed-off-by:
-
Tvrtko Ursulin authored
Engines belong to the GT so make it indicative in the API. Signed-off-by:
-
Tvrtko Ursulin authored
Engines belong to the GT so make it indicative in the API. Signed-off-by:
-
Tvrtko Ursulin authored
Engines belong to the GT so make it indicative in the API. Signed-off-by:
-
Tvrtko Ursulin authored
Engines belong to the GT so make it indicative in the API. Signed-off-by:
-
Tvrtko Ursulin authored
Engines belong to the GT so make it indicative in the API. Signed-off-by:
-
Chris Wilson authored
Add the backpointer to ppgtt and i915->gt so that we can traverse across the device hierarchy. Reported-by:
-
- 21 Oct, 2019 8 commits
-
-
Chris Wilson authored
With the last user, i915_vma_parked(), retired, there are no more users of the per-gt pm notifications and we can remove the unused infrastructure. Signed-off-by:
-
Chris Wilson authored
Currently even though i915_vma_parked() operates on a per-gt struct, it is called from a global pm notify. This oddity was only because the long term plan is to decouple the vma cache from the pm notification, but right now the oddity stands out like a sore thumb! Suggested-by:
-
Chris Wilson authored
To flush idle barriers, and even inflight requests, we want to send a preemptive 'pulse' along an engine. We use a no-op request along the pinned kernel_context at high priority so that it should run or else kick off the stuck requests. We can use this to ensure idle barriers are immediately flushed, as part of a context cancellation mechanism, or as part of a heartbeat mechanism to detect and reset a stuck GPU. Signed-off-by:
-
Chris Wilson authored
i915_active must track over any engine, so expand the selftest to iterate over all uabi engines. Signed-off-by:
-
Ville Syrjälä authored
On ILK+ the documented min hdisplay is 64, min hblank is 32, and min vblank is 5. On earlier platforms min hblank is also 32, and min vblank is 3. Make sure the mode satisfies those limits. There are further limits for HDMI and pfit use cases, but we'll check for those in a more specific location. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190718144340.1114-2-ville.syrjala@linux.intel.comReviewed-by:
Manasi Navare <manasi.d.navare@intel.com>
-
Chris Wilson authored
If we change the priority of the active context, then it has no impact on the decision of whether to preempt the active context -- we don't preempt the context with itself. In this situation, we elide the tasklet rescheduling and should *not* be marking up the queue_priority_hint as that may mask a later submission where we decide we don't have to kick the tasklet as a higher priority submission is pending (spoiler alert, it was not). Signed-off-by:
-
Joonas Lahtinen authored
Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
Use the local vgpu_lock while preparing workloads to avoid taking the obsolete i915->drm.struct_mutex Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191016183902.13614-1-chris@chris-wilson.co.uk
-
- 20 Oct, 2019 2 commits
-
-
Andi Shyti authored
Although the ring management is much smaller compared to the other GT power management functions, continue the theme of extracting it out of the huge intel_pm.c for maintenance. Based on a patch by Chris Wilson. Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Lionel Landwerlin authored
The current logic just reapplies the same configuration already stored into stream->oa_config instead of the newly selected one. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 7831e9a9 ("drm/i915/perf: Allow dynamic reconfiguration of the OA stream") Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
- 19 Oct, 2019 5 commits
-
-
Lucas De Marchi authored
s/?/:/ so it gets correctly colored by dmesg. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Lucas De Marchi authored
This way it's easier to figure out what didn't match when we have multiple pipes enabled. v2: pass drm_crtc and use the more common [CRTC:%d:%s] format (Ville) v3: use struct intel_crtc type to pass crtc around (Ville) Signed-off-by: -
Lucas De Marchi authored
The new line is already added by pipe_config_mismatch(), so the callers shouldn't add it. Signed-off-by:
-
Lucas De Marchi authored
Both Ice Lake and Elkhart Lake (gen 11) support MST on all external connections except DDI A. Tiger Lake (gen 12) supports on all external connections. Move the check to happen inside intel_dp_mst_encoder_init() and add specific platform checks. v2: Replace != with == checks for ports on gen < 11 (Ville) Signed-off-by:
-
Lucas De Marchi authored
Instead of the ever growing switch, just compute the ddi io power domain based on the port number. Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191011010907.103309-2-lucas.demarchi@intel.com
-
- 18 Oct, 2019 6 commits
-
-
Manasi Navare authored
In the transcoder port sync mode, the slave transcoders mask their vblanks until master transcoder's vblank so while disabling them, make sure slaves are disabled first and then the masters. v5: * Dont pass dev priv to get_slave_crtc (Ville) v4: * Obtain slave state from master (Maarten) v3: * Rebase v2: * Use the intel_old_crtc_state_disables() helper Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-6-manasi.d.navare@intel.com
-
Manasi Navare authored
This clears the transcoder port sync bits of the TRANS_DDI_FUNC_CTL2 register during crtc_disable(). v3: * Rebase on maarten's patches v2: * Directly write the trans_port_sync reg value (Maarten) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Manasi Navare authored
As per the display enable sequence, we need to follow the enable sequence for slaves first with DP_TP_CTL set to Idle and configure the transcoder port sync register to select the corersponding master, then follow the enable sequence for master leaving DP_TP_CTL to idle. At this point the transcoder port sync mode is configured and enabled and the Vblanks of both ports are synchronized so then set DP_TP_CTL for the slave and master to Normal and do post crtc enable updates. v11: * Rebase (Manasi) v10: * in trans sync mode, dont stop link train for tgl (Manasi) v9: Remove update_scanline_offset to rebase on Maarten's patch (Manasi) v8: * Rebase on Maarten's patches (Manasi) v7: * Use ffs(slaves) to get slave crtc (Ville) v6: * Modeset implies active_changed, remove one condition (Maarten) v5: * Fix checkpatch warning (Manasi) v4: * Reuse skl_commit_modeset_enables() hook (Maarten) * Obtain slave crtc and states from master (Maarten) v3: * Rebase on drm-tip (Manasi) v2: * Create a icl_update_crtcs hook (Maarten, Danvet) * This sequence only for CRTCs in trans port sync mode (Maarten) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Manasi Navare authored
After the state is committed, we readout the HW registers and compare the HW state with the SW state that we just committed. For Transcdoer port sync, we add master_transcoder and the salves bitmask to the crtc_state, hence we need to read those during the HW state readout to avoid pipe state mismatch. v11: * Move master trans init to get pipe_Config hooks (Ville) v10: * Initialize master_tarnscoder readout for all platforms (Ville) v9: * Initialize master_transcoder = INVALID at get config (Ville) v8: * Use master_select -1, address TRANS_EDP case (Ville) * Rename master_transcoder to _readout (Lucas) v7: * NDont read HW state for DSI v6: * Go through both parts of HW readout (Maarten) * Add a WARN if the same trans configured as master and slave (Ville, Maarten) v5: * Add return INVALID in defaut case (Maarten) v4: * Get power domains in master loop for get_config (Ville) v3: * Add TRANSCODER_D (Maarten) * v3 Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> v2: * Add Transcoder_D and MISSING_CASE (Maarten) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Manasi Navare authored
In case of tiled displays where different tiles are displayed across different ports, we need to synchronize the transcoders involved. This patch implements the transcoder port sync feature for synchronizing one master transcoder with one or more slave transcoders. This is only enbaled in slave transcoder and the master transcoder is unaware that it is operating in this mode. This has been tested with tiled display connected to ICL. v7: * Rebase on Maarten's patches v6: * Use master_trans +1 and address missing trans_edp case (Ville) v5: * Add TRANSCODER_D case and MISSING_CASE (Maarten) v4: Rebase v3: * Check of DP_MST moved to atomic_check (Maarten) v2: * Do not use RMW, just write to the register in commit (Jani N) Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Manasi Navare authored
In case of tiled displays when the two tiles are sent across two CRTCs over two separate DP SST connectors, we need a mechanism to synchronize the two CRTCs and their corresponding transcoders. So use the master-slave mode where there is one master corresponding to last horizontal and vertical tile that needs to be genlocked with all other slave tiles. This patch identifies saves the master transcoder in all the slave CRTC states. This is needed to select the master CRTC/transcoder while configuring transcoder port sync for the corresponding slaves. v6: Rebase (manasi) v5: * Address Ville's comments * Just pass crtc_state, no need to check GEN (Ville) v4: * Rebase v3: * Use master_tramscoder instead of master_crtc for valid HW state readouts (Ville) v2: * Move this to intel_mode_set_pipe_config(Jani N, Ville) * Use slave_bitmask to save associated slaves in master crtc state (Ville) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
